RESUMEN
Pakistan's economy greatly benefits from citrus production since these fruits are sold and consumed all over the world. Although citrus fruits are easy to cultivate, they are susceptible to diseases caused by bacteria, viruses, and fungi. These challenges, as well as difficulties in obtaining the proper nutrients, might negatively impact fruit yields and quality. Citrus canker is another complicated problem caused by the germ Xanthomonas axonopodis. This germ affects many types of citrus fruits all over the world. This study looked closely at how citrus canker affects the leaves and the quality of the fruit in places like Sargodha, Bhalwal, Kotmomin, and Silanwali, which are big areas for growing citrus in the Sargodha district. What we found was that plants without the disease had more chlorophyll in their leaves compared to the sick plants. Also, the healthy plants had better amounts of important minerals like calcium, magnesium, potassium, and phosphorus in their fruits. But the fruits with the disease had too much sodium, and the iron levels were a bit different. The fruits with the disease also didn't have as much of something that protects them called antioxidants, which made them more likely to get sick. This study helps us understand how citrus canker affects plants and fruit, so we can think of ways to deal with it.
Asunto(s)
Citrus , Frutas , Enfermedades de las Plantas , Hojas de la Planta , Xanthomonas axonopodis , Citrus/microbiología , Xanthomonas axonopodis/fisiología , Hojas de la Planta/microbiología , Hojas de la Planta/metabolismo , Enfermedades de las Plantas/microbiología , Frutas/microbiología , Minerales/metabolismo , Minerales/análisis , Clorofila/metabolismo , PakistánRESUMEN
Present study assessed the growth of two plant species and ion uptake by them grown on different proportion of industrial solid waste and garden soil. The industrial waste having high concentration of chemicals were used with garden soil at different proportion i.e. 0% (T0), 5% (T1), 10% (T2), 15% (T3) and 20% (T4). Two species namely Conocarpus erectus (alien plant) and Dodonaea viscosa (indigenous) were used as test plants in pot study. Different parameters including growth, physiology, and anatomy of plants and concentration of cations (Na+, K+, Ca2+, and Mg2+) in the plant shoot and root were measured at different time duration (initial, 1st, 2nd, 3rd and 4th month). The key objective of the study was to use these plants to establish their plantations on the barren lands where industrial solid wastes were being disposed of. C. erectus showed better growth than D. viscosa, as well as more uptake of ions. A significant increase in plant growth was observed in fourth month in T1, where plant height reached 24.5% and 46% for C. erectus and D. viscosa, respectively. At harvest, in C. erectus, no significant difference in the fresh (65-78 g) and dry weight (24-30 g) of the shoot was observed across treatments compared to the control. In D. viscosa, at the time of harvest, the fresh and dry weights of the root and shoot showed a strong, significantly decreasing pattern across T1, T2, and T3, leading to the death of the plant at T3 and T4. Further, optimum ratio of waste soil to garden soil was found as 10:90 and 20:80 to establish the plantations of D. viscosa and C. erectus, respectively in areas where such solid waste from industries are disposed. Findings can be used for the restoration of such solid waste for the sustainable management of industrial areas and their associated ecosystems.
Asunto(s)
Residuos Industriales , Brotes de la Planta/crecimiento & desarrollo , Brotes de la Planta/metabolismo , Raíces de Plantas/crecimiento & desarrollo , Raíces de Plantas/metabolismo , Sapindaceae/crecimiento & desarrollo , Sapindaceae/metabolismo , Sapindaceae/fisiología , Iones/metabolismo , Biodegradación AmbientalRESUMEN
One of the most prevalent infectious diseases and a key driver of antibiotic prescriptions in pediatrics is urinary tract infection (UTI). Due to the emergence of more resistant uropathogenic bacterial and fungal strains, current treatments are no longer effective, necessitating the urgent development of novel antibacterial and antifungal drugs. In this study, the antifungal, antibacterial, and anti-biofilm capabilities of compounds, such as tannase (TN) and gallic acid (GA), which were produced from a novel natural source, Acinetobacter baumannii (AB11) bacteria, were assessed for the inactivation of uropathogenic microorganisms (UMs). Ammonium sulphate precipitation, ion exchange, high-performance liquid chromatography, and gel filtration were used to purify TN and GA that were isolated from A. baumannii. A 43.08 % pure TN with 1221.2 U/mg specific activity and 10.51 mg/mL GA was obtained. The antibacterial, antifungal and anti-biofilm activities of TN and GA were evaluated against UMs and compared to those of commercially available antibiotics including sulfamethoxazole (SXT), levofloxacin (LEV), ciprofloxacin (CIP), amikacin (Ak), and nitrofurantoin (F). The results showed that TN and GA were superior to commercial antibiotics in their ability to inactivate UMs and considerably reduced biofilms formation. Additionally, the GA emerges as the top substitute for currently available medications, demonstrating superior antibacterial and antibiofilm properties against all UMs evaluated in this study. The results of this investigation showed that A. baumannii-derived TN and GA could be utilized as an alternative medication to treat UTIs.
Asunto(s)
Acinetobacter baumannii , Hidrolasas de Éster Carboxílico , Infecciones Urinarias , Humanos , Niño , Antifúngicos/farmacología , Antifúngicos/uso terapéutico , Pruebas de Sensibilidad Microbiana , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Infecciones Urinarias/microbiología , BiopelículasRESUMEN
The urgent need to address the severe environmental risk posed by chromium-contaminated industrial wastewater necessitates the development of eco-friendly cleanup methodologies. Utilizing the Ficus benghalensis plant extracts, the present study aims to develop green zinc oxide nanoparticles for the removal of Cr metal ions from wastewater. The leaves of Ficus benghalensis, often known as the banyan tree, were used to extract a solution for synthesizing ZnO NPs. These nanoparticles were developed with the goal of efficiently eliminating chromium (Cr) from industrial effluents. Batch studies were carried out to assess the efficiency of these synthesized ZnO NPs in treating leather industrial effluent, with aiming for optimal chromium removal. This involved measuring the nanoparticles' capacity to adsorb Cr ions from wastewater samples by comparing chromium levels before and after treatment. Removal efficiency for Cr was estimated through the batches such as optimization of pH, contact time, initial Cr concentration and sorbent dose of ZnO NPs were of the batches. These synthesized ZnO NPs were found to be successful in lowering chromium levels in wastewater to meet permissible limit. The nanoparticles exhibited their highest absorption capacity, reaching 94â¯% (46â¯mg/g) at pH 4, with a contact time of 7â¯hours with the optimum sorbent dose of 0.6â¯g/L. Hence, the excellent adsorption capabilities of these nanoparticles, together with their environmentally benign manufacturing technique, provide a long-term and efficient solution for chromium-contaminated wastewater treatment. Its novel nature has the potential to significantly improve the safety and cleanliness of water ecosystems, protecting the both i.e. human health and the environment.
Asunto(s)
Cromo , Ficus , Tecnología Química Verde , Extractos Vegetales , Aguas Residuales , Contaminantes Químicos del Agua , Óxido de Zinc , Óxido de Zinc/química , Ficus/química , Cromo/análisis , Cromo/química , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Extractos Vegetales/química , Tecnología Química Verde/métodos , Residuos Industriales/análisis , Adsorción , Nanopartículas del Metal/química , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodos , Nanopartículas/química , Hojas de la Planta/químicaRESUMEN
A polarization-insensitive liquid crystal (LC) Fresnel lens is developed with binary LC configurations of 90°-twisted nematic (TN) and vertically-aligned (VA) domains in the adjacent zones. A LC mixture comprised of nematic host, photopolymer and chiral material is initially filled into the VA cell with orthogonal rubbing treatment. After the ultraviolet irradiation on the filled LC cell through a photomask with Fresnel zone plate pattern, the interactions among orthogonal rubbing treatment, self-assembly polymer gravels, and chiral material induce the 90°-TN structure in the odd zones, whereas the initial VA structures are maintained in the even zones. The fabricated LC Fresnel lens with binary configuration emerges a maximum diffraction efficiency of around 35% at a voltage of 2.3â V, close to the theoretical diffraction limit of around 41%. The diffractive focus of the LC Fresnel lens is polarization-insensitive at the voltage above 2â V. When the voltage reaches 10â V, the diffractive focus vanishes. The numerical calculation confirms that the polarization-insensitive property appears in the primary focus of the LC Fresnel lens. This work reports a simple method to develop a highly efficient, polarization-insensitive, and electrically tunable LC Fresnel lens which is favorable for imaging system.
RESUMEN
Microlens has significant applications in integrated micro-optical systems. Recently, multifocal microlens arrays are expected to extend the depth of field for imaging systems and realize a highly efficient laser beam homogenizer. This work presents what we believe to be a novel approach for developing a tunable multifocal liquid crystal microlens array (TMLCMA), which can be operated in convex and concave modes through voltage control schemes. The TMLCMA is manufactured using nematic liquid crystals (LCs) with negative dielectric anisotropy, in conjunction with a triple-electrode structure consisting of top large-hole, middle small-hole array, and bottom planar electrodes. When a voltage is applied, the axially symmetric fringing electric field induced by the large-hole electrode causes the focal length of the microlens to gradually and radially change from the TMLCMA border toward the center. The gradient in the change of focal length is electrically tunable. The calculated spatial potential distributions qualitatively explain the multifocal characteristic and dual lens modes of the TMLCMA. The LC molecules in each microlens are reoriented in an axially symmetrical form, resulting in a polarization-insensitive TMLCMA. The imaging functions of the TMLCMA operated with dual lens modes are shown through practical demonstrations. The simple fabrication and versatile function make the developed TMLCMA highly promising for various optical system applications.
RESUMEN
Nanoparticles (NPs) preparation using a green as well as environmentally acceptable processes has achieved a lot of attention in recent decade. The current study compared the synthesis of titania (TiO2) nanoparticles synthesized from leaf extracts of two plant species (Trianthema portulacastrum, Chenopodium quinoa) and traditional approach by chemical preparation. The effects of no calcination on the physical characteristics of TiO2 NPs as well as their antifungal effects were examined and compared with the already reported calcinated TiO2 NPs. The produced TiO2 NPs were evaluated using high-tech techniques such as X-ray diffraction (XRD), scanning electron microscope, energy dispersive spectroscopy (EDX), and elemental mapping. TiO2 NPs prepared by sol-gel technique (T1) and prepared from extractions from leaves of T. portulacastrum (T2), and C. quinoa (T3) were either calcinated or non calcinated and tested against fungal disease (Ustilago tritici) of wheat for antifungal efficacy. The -peak (2θ) at 25.3 was confirmed by XRD to be connected with the anatase (101) form in both cases but before calcination, NPs were lacking the rutile and brookite peaks. The results showed that all types of TiO2 NPs examined had good antifungal activity against U. tritici, but those made from C. quinoa plant extract have good antifungal activity against disease. TiO2 NPs which are produced by the green methods (T2, T3) have the highest antifungal activity (58%, 57% respectively), while minimal activity (19%) was recorded when NPs were synthesized using the sol-gel method (T1) with 25 µl/mL. Non calcinated TiO2 NPs have less antifungal potential than calcined TiO2 NPs. It can be concluded that calcination may be preferred for efficient antifungal activity when using titania nanoparticles. The green technology may be used on a larger scale with less damaging TiO2 NP production and can be utilized against fungal disease on wheat crop to reduce crop losses worldwide.
Asunto(s)
Nanopartículas del Metal , Micosis , Nanopartículas , Antifúngicos/farmacología , Triticum , Titanio/farmacología , Titanio/química , Nanopartículas/química , Nanopartículas del Metal/toxicidad , Nanopartículas del Metal/química , Difracción de Rayos XRESUMEN
Cadmium (Cd) is a common toxic trace element found in agricultural soils which is mainly due to anthropogenic activities. Cadmium posed a significant risk to humans all around the world due to its cancer-causing ability. The current study demonstrated the effects of soil-applied biochar (BC) and foliar-applied titanium dioxide nanoparticles (TiO2 NPs) (at a rate of 0.5% and 75 mg/L respectively) alone or in combination on growth and Cd accumulation in wheat plants under field experiment. Soil applied BC and foliar TiO2 NPs, as well as BC coupled with TiO2 NPs, reduced Cd contents in grains by 32%, 47%, and 79%, than control respectively. The usage of NPs and BC boosted the plant height as well as chlorophyll contents by lowering oxidative injury and changing selected antioxidant enzyme activities in leaves than control plants. The combined use of NPs and BC prevented excess Cd accumulation in grains over the critical level (0.2 mg/kg) for cereals. The health risk index (HRI) due to Cd was reduced by 79% by co-composted BC + TiO2 NPs treatment than control. Although, HRI was lower than one for all treatments but this may exceed the limit if grains obtained from such field consumed over long periods. In conclusion, TiO2 NPs and BC amendments can be implemented in fields across the globe where excess Cd is present in soils. Additional studies on the use of such approaches in more precise experimental settings are needed in order to address this environmental problem at larger scale.
Asunto(s)
Nanopartículas , Contaminantes del Suelo , Humanos , Cadmio/toxicidad , Cadmio/análisis , Triticum , Nanopartículas/toxicidad , Suelo , Antioxidantes/farmacología , Contaminantes del Suelo/toxicidad , Contaminantes del Suelo/análisisRESUMEN
Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review.
Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Humanos , Cromo/análisis , Aguas Residuales , Contaminantes Químicos del Agua/análisis , Adsorción , Concentración de Iones de HidrógenoRESUMEN
The present study aims to prepare novel quinoa biosorbent (QB), acid activated QB (QB/Acid) and its nanocomposite with magnetic nanoparticles (QB/MNPs) for batch scale Cr removal from contaminated water. The Cr adsorption was systematically studied at different pH (2-9), adsorbent dosage (1-3 g/L), initial concentration (25-200 mg/L), contact time (180 min) and competing ions in water. Maximum Cr adsorption was observed onto QB/MNPs (57.4 mg/L), followed by QB/Acid (46.35 mg/g) and QB (39.9 mg/g). The Cr removal by QB/MNPs was higher than QB/Acid and QB. Results revealed that the highest Cr removal was obtained at optimum pH 4, 25 mg/L, and 2 g/L dosage. The FTIR spectra displayed various functional groups on adsorbents surface serving as a potential scaffold to remove Cr from contaminated water. The equilibrium and kinetic Cr adsorption data best fitted with Freundlich and pseudo-second order models, respectively (R2 ≥ 0.96). The QB/MNPs showed excellent reusability in five adsorption/desorption cycles (4.7% decline) with minor leaching of Fe (below threshold level). The coexisting ions in groundwater showed an inhibitory effect on Cr sequestration (5%) from water. The comparison of Cr adsorption by QB/MNPs and QB/Acid showed better potential for Cr sequestration than various previously explored adsorbents in the literature.
Quinoa is a cereal crop and after harvesting quinoa straws are either burnt or thrown away which can cause several environmental problems. It would be beneficial to utilize quinoa straws and its modified forms as adsorbents for the water remediation. Therefore, current study aims to estimate the adsorption capacity of quinoa biomass as biosorbent (QB) and its modifications (QB/Acid and QB/MNPs) to treat Cr (VI) contaminated water. The influence of various parameters governing the Cr removal from water has been evaluated. The reusability of QB/MNPs has also been evaluated for its economical use without losing effectiveness for Cr removal from water. The comparison of Cr adsorption by QB/MNPs and QB/Acid showed better adsorption potential for Cr sequestration than various previously explored adsorbents in the literature.
Asunto(s)
Chenopodium quinoa , Contaminantes Químicos del Agua , Purificación del Agua , Contaminantes Químicos del Agua/análisis , Concentración de Iones de Hidrógeno , Purificación del Agua/métodos , Biodegradación Ambiental , Cromo , Adsorción , Agua , Cinética , Iones , Fenómenos MagnéticosRESUMEN
Pakistan is the fourth largest yarn producer in the world heavily that relies on cotton crop which receives a substantial 62% of all pesticide applications. The present study was conducted to quantify the levels of pesticides such as bifenthrin, spirotetramat, pyriproxyfen, imidacloprid, and diafenthiuron in soil and plants residue at selected cotton fields of Multan District, Pakistan. In addition to pesticides, the assessment of heavy metal concentration was also conducted in order to determine the overall risks that these compounds to both plants and human population. For this analysis, 20 soil samples and 10 plant samples were collected from 10 selected cotton fields. Pesticides and heavy metals in soil and plant samples were analyzed using high-performance liquid chromatography (HPLC) and Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), respectively. It was observed that all samples collected from selected fields contained pesticide residue in top soil (0-15 cm). However, no pesticides were detected in the lower soil layer (16-30 cm). In case of heavy metals, the highest concentration of Fe, Pb, and Mn was observed in both soil and plant residue samples. The heavy metals were found in the order of Fe > Mn > Pb > Zn > Cu > Cd in the soil. The total carcinogenic risk values for a few pesticides were found to range from 10-6 to 10-2, indicating that residents of the study area have low to higher chances of developing cancer. A positive correlation was observed among the pesticides (r = 0.18-0.95) as well as in metals related parameters (r = 0.49-0.96), where a weak negative correlation was found among metal to pesticide parameters except Pd where the maximum r value was 0.62. In general, the finding of this study encourages the development and adoption of sustainable agricultural practices that lower the dependence on toxic pesticides and endorse environmentally friendly alternatives.
Asunto(s)
Contaminantes Ambientales , Neoplasias , Plaguicidas , Humanos , Pakistán/epidemiología , Plomo , Monitoreo del Ambiente , Celulosa , Medición de RiesgoRESUMEN
The acoustic performance of a silencer containing elastic membranes backed by cavities and porous material is investigated. The modeled waveguide configuration contains porous screens as well as the metallic fairings at interfaces between the inlet and outlet and the expansion chamber. The mode-matching solution is developed to analyze the attenuation of the silencer. The governing eigen-sub-systems are Sturm-Liouville and non-Sturm-Liouville types. In the latter case, the exploitation of generalized orthogonality conditions reveals the point-wise convergence of the solution to the governing eigen-systems. The study shows that by tuning the material parameters of the isotropic membranes and altering the bounding wall conditions, the performance of the physical device can be improved. It enables the model configuration to be adopted as a passive or reactive noise control device.
RESUMEN
Nanotechnology is capturing great interest worldwide due to their stirring applications in various fields. Among nanoparticles (NPs), titanium dioxide (TiO2) NPs have been widely used in daily life and can be synthesized through various physical, chemical, and green methods. Green synthesis is a non-toxic, cost-effective, and eco-friendly route for the synthesis of NPs. Plenty of work has been reported on the green, chemical, physical and biological synthesis of TiO2 NPs and these NPs can be characterized through high tech. instruments. In the present review, dense data have been presented on the comparative synthesis of TiO2 NPs with different characteristics and their wide range of applications. Among the TiO2 NPs synthesis techniques, the green methods have been proven to be efficient than chemical synthesis methods because of the less use of precursors, time-effectiveness, and energy-efficiency during the green synthesis procedures. Moreover, this review describes the types of plants (shrubs, herbs and trees), microorganisms (bacteria, fungi and algae), biological derivatives (proteins, peptides, and starches) employed for the synthesis of TiO2 NPs. The TiO2 NPs can be effectively used for the treatment of polluted water and positively affected the plant physiology especially under abiotic stresses but the response varied with types, size, shapes, doses, duration of exposure, metal species along with other factors. This review also highlights the regulating features and future standpoints for the measurable enrichment in TiO2 NPs product and perspectives of TiO2 NPs reliable application.
Asunto(s)
Nanopartículas , Titanio , Nanopartículas del Metal/química , Extractos Vegetales , Plantas/químicaRESUMEN
Cadmium (Cd) accumulation in arable lands has become a serious matter for food security. Among various approaches, the application of nanoparticles (NPs) for remediation of contaminated water and soils is attaining more popularity worldwide. The current field experiment was executed to explore the impacts of single and combined use of ZnO NPs, Fe NPs and Si NPs on wheat growth and Cd intake by plants in a Cd-contaminated field. Wheat was sown in a field which was contaminated with Cd and was irrigated with the raw-city-effluent while NPs were applied as foliar spray alone and in all possible combinations. The data revealed that straw and grain yields were enhanced in the presence of NPs over control. Chlorophyll, carotenoids contents and antioxidants activities were enhanced while electrolyte leakage was reduced with all NPs over control. In comparison with control, Cd uptake in wheat straw was reduced by 84% and Cd uptake in grain was reduced by 99% in T8 where all three NPs were foliar-applied simultaneously. Zinc (Zn) and iron (Fe) contents were increased in those plants where ZnO and Fe NPs were exogenously applied which revealed that ZnO and Fe NPs enhanced the bio-fortification of Zn and Fe in wheat grains. Overall, foliar application of different NPs is beneficial for better wheat growth, yield, nutrients uptake and to lessen the Cd intake by plants grown in Cd-contaminated soil under real field conditions.
Asunto(s)
Cadmio/metabolismo , Nanopartículas/química , Contaminantes del Suelo/metabolismo , Triticum/fisiología , Antioxidantes , Cadmio/análisis , Cadmio/toxicidad , Clorofila , Grano Comestible/química , Contaminación Ambiental , Hojas de la Planta/química , Suelo , Contaminantes del Suelo/análisis , Contaminantes del Suelo/toxicidad , Triticum/crecimiento & desarrollo , Zinc/análisis , Óxido de ZincRESUMEN
Graphene as a material for optoelectronic design applications has been significantly restricted owing to zero bandgap and non-compatible handling procedures compared with regular microelectronic ones. In this work, nitrogen-doped reduced graphene oxide (N-rGO) with tunable optical bandgap and enhanced electrical conductivity was synthesized via a microwave-assisted hydrothermal method. The properties of the synthesized N-rGO were determined using XPS, FTIR and Raman spectroscopy, UV/vis, as well as FESEM techniques. The UV/vis spectroscopic analysis confirmed the narrowness of the optical bandgap from 3.4 to 3.1, 2.5, and 2.2 eV in N-rGO samples, where N-rGO samples were synthesized with a nitrogen doping concentration of 2.80, 4.53, and 5.51 at.%. Besides, an enhanced n-type electrical conductivity in N-rGO was observed in Hall effect measurement. The observed tunable optoelectrical characteristics of N-rGO make it a suitable material for developing future optoelectronic devices at the nanoscale.
RESUMEN
Understanding groundwater quality and hydrogeochemical behavior is important because consumption of the potentially toxic elements (PTEs)-contaminated drinking water may induce several health problems for humans and animals. In the current study, we examined the potential groundwater contamination with various PTEs (arsenic, As; cadmium, Cd; copper, Cu; manganese; Mn) and the PTEs-induced health risk. Groundwater (n = 111) was characterized for total As, Cd, Cu, and Mn concentrations and other water quality attributes along the River Sutlej floodplain of Punjab, Pakistan. Results revealed that groundwater, which is used for drinking purpose, contained high concentrations of As and Cd (mean As: 33 µg/L, mean Cd: 3 µg/L), exceeding 100% and 32% than the World Health Organization's safe limits (10 and 3 µg/L, respectively) in drinking water. The other water quality attributes (i.e., EC, HCO3, Cl and SO4) were also found above their safe limits in most of the wells. Hydrogeochemical data showed that groundwater was dominated with Na-SO4, Na-Cl, Ca/Mg-CO3 type saline water. The hazard quotient and cancer risk indices values calculated for As and Cd indicated potential threat (carcinogenic risk > 0.0001 and non-carcinogenic risk > 1.0) of drinking groundwater in the study area. This study shows that the groundwater along River Sutlej floodplain poses a health threat to the communities relying on it for drinking and irrigation due to high concentrations of As and Cd in water. Moreover, it is important to monitor groundwater quality in the adjacent areas along River Sutlej floodplain and initiate suitable mitigation and remediation programs for the safety of people's health in Punjab, Pakistan.
Asunto(s)
Arsénico , Agua Subterránea , Contaminantes Químicos del Agua , Arsénico/análisis , Arsénico/toxicidad , Monitoreo del Ambiente , Humanos , Pakistán , Ríos , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/toxicidadRESUMEN
BACKGROUND: Kinnow orchards were selected in different ecological zones in districts Sargodha, Toba Tek Singh (TTS) and Vehari of the Punjab province, Pakistan. Three biological replicates in block form were applied by using analysis of variance techniques to assess varying agrometeorological indices impact on fruit color-development and peel composition. RESULTS: Fruit samples were randomly collected on each month's end starting from August up to February. Chromameter was used for measuring coloring parameters and its values a*, b*, C* and L* were increased from August till February with a rapid elevation started at color-break stage, while hue angle (h*) rotated from 120° to 60° of portraying green to yellow shade. An increasing level of chlorophyll contents were noted in August till color-break at the end of October and then diminished afterwards. Whereas, carotenoids increased rapidly upon yellow tinting peel of Kinnow fruits till fully attained deep orange color at the end of February. Ascorbic acid content and total phenolic content (TPC) showed a decreasing trend whereas anthocyanins and antioxidant activity were increased from August to February, with unchanged flavonoids and flavonols level. Fruit firmness was gradually reduced till color-break with rapid reduction noted subsequently. Maturity index represented internal ripening directly increased with color-development. CONCLUSION: Color development has directly influenced on maturity index and both were increased rapidly after color-break to afterwards. More color development with rapid reduction in chlorophyll, ascorbic acid and TPC level were seen in warm districts namely TTS and Vehari after color-break stage due to accumulating more agrometeorological indices. © 2020 Society of Chemical Industry.
Asunto(s)
Citrus/química , Color , Frutas/química , Ácido Ascórbico/análisis , Clorofila/análisis , Clima , Pakistán , Fenoles/análisis , Estaciones del AñoRESUMEN
Soil cadmium (Cd) contamination and drought stress are among the main issues hindering global food security. Biochar has been used to reduce metal uptake by plants and water stress mitigation, but long-term residual effects of biochar under Cd stress at different moisture levels needs to be investigated. A following rice (Oryza sativa L.) was grown after wheat on Cd-contaminated soil amended with different levels of biochar (0, 3.0, and 5.0%, w/w). Thirty five days old plants were irrigated with three moisture levels including zero drought as a control (1-2 cm water layer on soil), mild drought (MD, 50% of soil water holding capacity, WHC), and severe drought (SD, 35% of soil WHC) for an accompanying 35 days. Plant height, biomass and photosynthesis were reduced whereas oxidative stress increased under MD and SD than control in un-amended soil while opposite trends were observed in plants grown in biochar amended soil. At the same biochar addition, Cd concentrations in seedlings were lower in continuous flooding than MD and SD treatments. The biochar supply reduced the bioavailable Cd in the soil whereas increased the soil EC and pH than the control treatment. In conclusion, continuous flooding plus residual biochar can be strategized in mitigating Cd-contamination in paddy soils and decreased Cd concentrations in rice which may reduce the potential risks to humans.
Asunto(s)
Cadmio/farmacocinética , Carbón Orgánico , Fotosíntesis , Contaminantes del Suelo/farmacocinética , Oryza , Suelo , AguaRESUMEN
Visual tracking and 3D representation of guidewire in fluoroscopic image sequence for beating heart image guided interventions is very challenging task. The degraded image quality due to low dose fluoroscopy further complicates the problem. In this paper a robust guidewire tracking is proposed for mean shift algorithm using integrated colour, texture and depth features. The target colour, texture and depth features are encoded into gray level intensity histogram, filtered local binary pattern histogram and filtered local depth pattern histograms respectively. For depth features a 3D image acquisition system for C-Arm, X-Ray imaging system is simulated for real time three dimensional shape recovery of guidewire and associated vessels for vertical beating heart motion using shape from focus technique. The proposed technique provides 3D visualization of guide wire and vessels to the physician as well as real time robust guidewire tip tracking. Experimental results of guidewire tip tracking and 3D shape recovery on image sequence acquired through beating heart simulated phantom show the significance of the proposed technique.
Asunto(s)
Algoritmos , Técnicas de Diagnóstico Cardiovascular , Corazón/diagnóstico por imagen , Imagenología Tridimensional , Cateterismo , Fluoroscopía , Humanos , Fantasmas de ImagenRESUMEN
In any contaminated environment, the sensitive plant species can serve as bio-indicator of air pollution while tolerant plant species can act as a sink for air pollutants. Air pollution tolerance index (APTI) is an important tool to screen out plants based on their tolerance or sensitivity level to different air pollutants. The present study was aimed to identify the sensitive and tolerant plant species in the vicinity of brick kilns in the Rawalpindi city. To determine the susceptibility level of the selected plant species, four biochemical parameters, ascorbic acid, total chlorophyll content, relative water content and pH of leaf extract, were assessed and APTI was calculated. Plant sampling was carried out with increasing distance of 100, 300 and 500 m around three brick kiln sites and APTI values were calculated by following the standard methods. The results of the study revealed that among nine studied plant species, Calotropis procera (APTI = 20.05) and Althernanthera pungens (APTI = 17.13) were found to be the most tolerant species, whereas Malva neglecta (APTI = 8.83) was found to be the most sensitive species. Inconsistent trend of variations was seen in the APTI values at each site. The present study suggested that the most tolerant species, C. procera and A. pungens, could be grown in the vicinity of such pollution sources as a remedial measure of brick kiln pollution.