RESUMEN
Magnesium (Mg) batteries hold promise as a large-scale energy storage solution, but their progress has been hindered by the lack of high-performance cathodes. Here, we address this challenge by unlocking the reversible four-electron Te0/Te4+ conversion in elemental Te, enabling the demonstration of superior Mg//Te dual-ion batteries. Specifically, the classic magnesium aluminum chloride complex (MACC) electrolyte is tailored by introducing Mg bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2), which initiates the Te0/Te4+ conversion with two distinct charge-storage steps. Te cathode undergoes Te/TeCl4 conversion involving Cl- as charge carriers, during which a tellurium subchloride phase is presented as an intermediate. Significantly, the Te cathode achieves a high specific capacity of 543â mAh gTe -1 and an outstanding energy density of 850â Wh kgTe -1, outperforming most of the previously reported cathodes. Our electrolyte analysis indicates that the addition of Mg(TFSI)2 reduces the overall ion-molecule interaction and mitigates the strength of ion-solvent aggregation within the MACC electrolyte, which implies the facilized Cl- dissociation from the electrolyte. Besides, Mg(TFSI)2 is verified as an essential buffer to mitigate the corrosion and passivation of Mg anodes caused by the consumption of the electrolyte MgCl2 in Mg//Te dual-ion cells. These findings provide crucial insights into the development of advanced Mg-based dual-ion batteries.
RESUMEN
The chemistry and physics of macropolyhedral B18H22 clusters have attracted significant attention due to the interesting photophysical properties of anti-B18H22 (blue emission, laser properties) and related potential applications. We have focused our attention on the "forgotten" syn-B18H22 isomer, which has received very little attention since its discovery compared to its anti-B18H22 isomer, presumably because numerous studies have reported this isomer as nonluminescent. In our study, we show that in crystalline form, syn-B18H22 exhibits blue fluorescence and becomes phosphorescent when substituted at various positions on the cluster, associated with peculiar microstructural-dependent effects. This work is a combined theoretical and experimental investigation that includes the synthesis, separation, structural characterization, and first elucidation of the photophysical properties of three different monothiol-substituted cluster isomers, [1-HS-syn-B18H21] 1, [3-HS-syn-B18H21] 3, and [4-HS-syn-B18H21] 4, of which isomers 1 and 4 have been proved to exist in two different polymorphic forms. All of these newly substituted macropolyhedral cluster derivatives (1, 3, and 4) have been fully characterized by NMR spectroscopy, mass spectrometry, single-crystal X-ray diffraction, IR spectroscopy, and luminescence spectroscopy. This study also presents the first report on the mechanochromic shift in the luminescence of a borane cluster and generally enriches the area of rather rare boron-based luminescent materials. In addition, we present the first results proving that they are useful constituents of carbon-free self-assembled monolayers.
RESUMEN
Solid-state lithium metal batteries with garnet-type electrolyte provide several advantages over conventional lithium-ion batteries, especially for safety and energy density. However, a few grand challenges such as the propagation of Li dendrites, poor interfacial contact between the solid electrolyte and the electrodes, and formation of lithium carbonate during ambient exposure over the solid-state electrolyte prevent the viability of such batteries. Herein, an ultrathin sub-nanometer porous carbon nanomembrane (CNM) is employed on the surface of solid-state electrolyte (SSE) that increases the adhesion of SSE with electrodes, prevents lithium carbonate formation over the surface, regulates the flow of Li-ions, and blocks any electronic leakage. The sub-nanometer scale pores in CNM allow rapid permeation of Li-ions across the electrode-electrolyte interface without the presence of any liquid medium. Additionally, CNM suppresses the propagation of Li dendrites by over sevenfold up to a current density of 0.7 mA cm-2 and enables the cycling of all-solid-state batteries at low stack pressure of 2 MPa using LiFePO4 cathode and Li metal anode. The CNM provides chemical stability to the solid electrolyte for over 4 weeks of ambient exposure with less than a 4% increase in surface impurities.
RESUMEN
Molecular thin carbon nanomembranes (CNMs) synthesized by electron irradiation induced cross-linking of aromatic self-assembled monolayers (SAMs) are promising 2D materials for the next generation of filtration technologies. Their unique properties including ultimately low thickness of ≈1 nm, sub-nanometer porosity, mechanical and chemical stability are attractive for the development of innovative filters with low energy consumption, improved selectivity, and robustness. However, the permeation mechanisms through CNMs resulting in, e.g., an ≈1000 times higher fluxes of water in comparison to helium have not been yet understood. Here, a study of the permeation of He, Ne, D2 , CO2 , Ar, O2 and D2 O using mass spectrometry in the temperature range from room temperature to ≈120 °C is studied. As a model system, CNMs made from [1â³,4',1',1]-terphenyl-4-thiol SAMs are investigated. It is found out that all studied gases experience an activation energy barrier upon the permeation which scales with their kinetic diameters. Moreover, their permeation rates are dependent on the adsorption on the nanomembrane surface. These findings enable to rationalize the permeation mechanisms and establish a model, which paves the way toward the rational design not only of CNMs but also of other organic and inorganic 2D materials for energy-efficient and highly selective filtration applications.
RESUMEN
The effect of roughness and thickness of alumina layers, mimicking the passivation layer commonly used in dye-sensitized photoelectrodes, on the molecular adsorption of P1 dye, 4-(bi(4-(2,2-dicyano-vinyl)-thiophene-2-yl]-phenyl]-aminobenzoic acid) has been studied using surface-sensitive vibrational sum frequency generation(VSFG) spectroscopy. The VSFG spectra reveal the formation of poorly ordered dye layers on relatively rough surfaces where XPS measures a higher dye loading. Furthermore, these poorly ordered dye molecules are responsible for the generation of trapped electronic states as probed by successive photoluminescence (PL) measurements. Surface sensitive VSFG spectroscopy in combination with XPS and PL measurements provide complementary spectral information on ordering of the adsorbed dyes, their density on the surface and electronic states of the adsorbed monolayer which are prerequisite for improving our understanding of molecularly functionalized photoelectrodes and their further development.
RESUMEN
Two-dimensional van der Waals heterostructures (2D vdWHs) have recently gained widespread attention because of their abundant and exotic properties, which open up many new possibilities for next-generation nanoelectronics. However, practical applications remain challenging due to the lack of high-throughput techniques for fabricating high-quality vdWHs. Here, we demonstrate a general electrochemical strategy to prepare solution-processable high-quality vdWHs, in which electrostatic forces drive the stacking of electrochemically exfoliated individual assemblies with intact structures and clean interfaces into vdWHs with strong interlayer interactions. Thanks to the excellent combination of strong light absorption, interfacial charge transfer, and decent charge transport properties in individual layers, thin-film photodetectors based on graphene/In2 Se3 vdWHs exhibit great promise for near-infrared (NIR) photodetection, owing to a high responsivity (267â mA W-1 ), fast rise (72â ms) and decay (426â ms) times under NIR illumination. This approach enables various hybrid systems, including graphene/In2 Se3 , graphene/MoS2 and graphene/MoSe2 vdWHs, providing a broad avenue for exploring emerging electronic, photonic, and exotic quantum phenomena.
RESUMEN
Coalition formation is one of the most striking forms of cooperation found in animals. Yet, there is substantial variation between taxa regarding the mechanisms by which coalitions can result in fitness consequences. Here, we investigate the influence of coalitions on dominance rank trajectories and subsequently on reproductive success in wild male crested macaques (Macaca nigra) at Tangkoko Nature Reserve (Sulawesi, Indonesia). We observed 128 coalition events involving 28 males and tested how a variety of coalition properties and factors related to the social environment influenced future male rank. We further used genetic paternity analysis of 19 infants conceived during the study to assess male reproductive success. Our results show that males participating in coalitions achieved higher-than-expected future ranks, while coalition targets had lower-than-expected future ranks. Additionally, all-up coalitions had stronger effects on rank than all-down and bridging coalitions, and these were modulated by the relative strength of coalition partners versus targets. Finally, higher ranking males were more likely to sire infants than lower ranking males. These results provide important insights regarding the mechanisms underlying coalition formation and support the idea that one major path by which coalitions can affect fitness is through influencing male dominance trajectories.
Asunto(s)
Macaca , Reproducción , Animales , Humanos , Indonesia , MasculinoRESUMEN
Artificial photosynthesis for hydrogen production is an important element in the search for green energy sources. The incorporation of photoactive units into mechanically stable 2D materials paves the way toward the realization of ultrathin membranes as mimics for leaves. Here we present and compare two concepts to introduce a photoactive RuII polypyridine complex into ≈1â nm thick carbon nanomembranes (CNMs) generated by low-energy electron irradiation induced cross-linking of aromatic self-assembled monolayers. The photoactive units are either directly incorporated into the CNM scaffold or covalently grafted to its surface. We characterize RuII CNMs using X-ray photoelectron, surface-enhanced Raman, photothermal deflection spectroscopy, atomic force, scanning electron microscopy, and study their photoactivity in graphene field-effect devices. Therewith, we explore the applicability of low-energy electron irradiation of metal complexes for photosensitizer nanosheet formation.
RESUMEN
An effective strategy to enhance the performance of inorganic semiconductors is moving towards organic-inorganic hybrid materials. Here, we report the design of core-shell hybrid materials based on a TiO2 core functionalized with a polyampholytic (poly(dehydroalanine)-graft-(n-propyl phosphonic acid acrylamide) shell (PDha-g-PAA@TiO2 ). The PDha-g-PAA shell facilitates the efficient immobilization of the photosensitizer Eosin Y (EY) and enables electronic interactions between EY and the TiO2 core. This resulted in high visible-light-driven H2 generation. The enhanced light-driven catalytic activity is attributed to the unique core-shell design with the graft copolymer acting as bridge and facilitating electron and proton transfer, thereby also preventing the degradation of EY. Further catalytic enhancement of PDha-g-PAA@TiO2 was possible by introducing [Mo3 S13 ]2- cluster anions as hydrogen-evolution cocatalyst. This novel design approach is an example for a multi-component system in which reactivity can in future be independently tuned by selection of the desired molecular or polymeric species.
RESUMEN
Recently, porous photocatalytically active block copolymer membranes were introduced, based on heterogenized molecular catalysts. Here, we report the integration of the photosensitizer, i. e., the light absorbing unit in an intermolecular photocatalytic system into block copolymer membranes in a covalent manner. We study the resulting structure and evaluate the orientational mobility of the photosensitizer as integral part of the photocatalytic system in such membranes. To this end we utilize transient absorption anisotropy, highlighting the temporal reorientation of the transition dipole moment probed in a femtosecond pump-probe experiment. Our findings indicate that the photosensitizer is rigidly bound to the polymer membrane and shows a large heterogeneity of absolute anisotropy values as a function of location probed within the matrix. This reflects the sample inhomogeneity arising from different protonation states of the photosensitizer and different intermolecular interactions of the photosensitizers within the block copolymer membrane scaffold.
Asunto(s)
Fármacos Fotosensibilizantes , Polímeros , Fenómenos Químicos , PorosidadRESUMEN
The unique optical and photoredox properties of heptazine-based polymeric carbon nitride (PCN) materials make them promising semiconductors for driving various productive photocatalytic conversions. However, their typical absorption onset at ca. 430-450â nm is still far from optimum for efficient sunlight harvesting. Despite many reports of successful attempts to extend the light absorption range of PCNs, the determination of the structural features responsible for the red shift of the light absorption edge beyond 450â nm has often been obstructed by the highly disordered structure of PCNs and/or low content of the moieties responsible for changes in optical and electronic properties. In this work, we implement a high-temperature (900 °C) treatment procedure for turning the conventional melamine-derived yellow PCN into a red carbon nitride. This approach preserves the typical PCN structure but incorporates a new functionality that promotes visible light absorption. A detailed characterization of the prepared material reveals that partial heptazine fragmentation accompanied by de-ammonification leads to the formation of azo-groups in the red PCN, a chromophore moiety whose role in shifting the optical absorption edge of PCNs has been overlooked so far. These azo moieties can be activated under visible-light (470â nm) for H2 evolution even without any additional co-catalyst, but are also responsible for enhanced charge-trapping and radiative recombination, as shown by spectroscopic studies.
RESUMEN
Aromatic self-assembled monolayers (SAMs) can be cross-linked into molecular nanosheets - carbon nanomembranes (CNMs) -via low-energy electron irradiation. Due to their favorable mechanical stability and tunable functional properties, they possess a high potential for various applications including nanosensors and separation membranes for osmosis or energy conversion devices. Despite this potential, the mechanistic details of the electron irradiation induced cross-linking process still need to be understood in more detail. Here, we studied the cross-linking of 4'-nitro-1,1'-biphenyl-4-thiol SAM on gold. The SAM samples were irradiated with different electron energies ranging from 2.5 to 100 eV in ultra-high vacuum and subsequently analysed by complementary techniques. We present results obtained via spectroscopy and microscopy characterization by high-resolution X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction with micrometre sized electron beams (µLEED) and low-energy electron microscopy (LEEM). To demonstrate the formation of CNMs, the formed two-dimensional molecular materials were transferred onto grids and oxidized wafer and analyzed by optical, scanning electron microscopy (SEM) and atomic force microscopy (AFM). We found a strong energy dependence for the cross section for the cross-linking process, the rate of which decreases exponentially towards lower electron energies by about four orders of magnitude. We conduct a comparative analysis of the cross sections for the C-H bond scission via electron impact ionization and dissociative electron attachment and find that these different ionization mechanisms are responsible for the variation of the cross-linking cross section with electron energy.
RESUMEN
Although being attractive materials for photoelectrochemical hydrogen evolution reaction (PEC HER) under neutral or acidic conditions, conjugated polymers still show poor PEC HER performance in alkaline medium due to the lack of water dissociation sites. Herein, we demonstrate that tailoring the polymer skeleton from poly(diethynylthieno[3,2-b]thiophene) (pDET) to poly(2,6-diethynylbenzo[1,2-b:4,5-b']dithiophene (pBDT) and poly(diethynyldithieno[3,2-b:2',3'-d]thiophene) (pDTT) in conjugated acetylenic polymers (CAPs) introduces highly efficient active sites for water dissociation. As a result, pDTT and pBDT, grown on Cu substrate, demonstrate benchmark photocurrent densities of 170â µA cm-2 and 120â µA cm-2 (at 0.3â V vs. RHE; pHâ 13), which are 4.2 and 3â times higher than that of pDET, respectively. Moreover, by combining DFT calculations and electrochemical operando resonance Raman spectroscopy, we propose that the electron-enriched Cß of the outer thiophene rings of pDTT are the water dissociation active sites, while the -C≡C- bonds function as the active sites for hydrogen evolution.
RESUMEN
Field effect transistors (FETs) based on 2D materials are of great interest for applications in ultrathin electronic and sensing devices. Here we demonstrate the possibility to add optical switchability to graphene FETs (GFET) by functionalizing the graphene channel with optically switchable azobenzene molecules. The azobenzene molecules were incorporated to the GFET channel by building a van der Waals heterostructure with a carbon nanomembrane (CNM), which is used as a molecular interposer to attach the azobenzene molecules. Under exposure with 365â nm and 455â nm light, azobenzene molecules transition between cis and trans molecular conformations, respectively, resulting in a switching of the molecular dipole moment. Thus, the effective electric field acting on the GFET channel is tuned by optical stimulation and the carrier density is modulated.
RESUMEN
The thermal decomposition of graphene oxide (GO) is a complex process at the atomic level and not fully understood. Here, a subclass of GO, oxo-functionalized graphene (oxo-G), was used to study its thermal disproportionation. We present the impact of annealing on the electronic properties of a monolayer oxo-G flake and correlated the chemical composition and topography corrugation by two-probe transport measurements, XPS, TEM, FTIR and STM. Surprisingly, we found that oxo-G, processed at 300 °C, displays C-C sp3 -patches and possibly C-O-C bonds, next to graphene domains and holes. It is striking that those C-O-C/C-C sp3 -separated sp2 -patches a few nanometers in diameter possess semiconducting properties with a band gap of about 0.4â eV. We propose that sp3 -patches confine conjugated sp2 -C atoms, which leads to the local semiconductor properties. Accordingly, graphene with sp3 -C in double layer areas is a potential class of semiconductors and a potential target for future chemical modifications.
RESUMEN
Heptazine-based polymeric carbon nitrides (PCN) are promising photocatalysts for light-driven redox transformations. However, their activity is hampered by low surface area resulting in low concentration of accessible active sites. Herein, we report a bottom-up preparation of PCN nanoparticles with a narrow size distribution (ca. 10±3â nm), which are fully soluble in water showing no gelation or precipitation over several months. They allow photocatalysis to be carried out under quasi-homogeneous conditions. The superior performance of water-soluble PCN, compared to conventional solid PCN, is shown in photocatalytic H2 O2 production via reduction of oxygen accompanied by highly selective photooxidation of 4-methoxybenzyl alcohol and benzyl alcohol or lignocellulose-derived feedstock (ethanol, glycerol, glucose). The dissolved photocatalyst can be easily recovered and re-dissolved by simple modulation of the ionic strength of the medium, without any loss of activity and selectivity.
RESUMEN
Direct covalent functionalization of large-area single-layer hexagonal boron nitride (hBN) with various polymer brushes under mild conditions is presented. The photopolymerization of vinyl monomers results in the formation of thick and homogeneous (micropatterned, gradient) polymer brushes covalently bound to hBN. The brush layer mechanically and chemically stabilizes the material and allows facile handling as well as long-term use in water splitting hydrogen evolution reactions.
RESUMEN
A triol-functionalized 2,2'-bipyridine (bpy) derivative has been synthesized and used for the tris-alkoxylation of polyoxometalate (POM) precursors. The resultant POM-bpy conjugates of the Wells-Dawson- and Anderson-type feature a C-C bond as a linkage between the POM and bpy fragments. This structural motif is expected to increase the hydrolytic stability of the compounds. This is of particular relevance with respect to the application of POM-bpy metal complexes, as photocatalysts, in the hydrogen-evolution reaction (HER) in an aqueous environment. Accordingly, Rh(III) and Ir(III) complexes of the POM-bpy ligands have been prepared and characterized. These catalyst-photosensitizer dyads have been analyzed with respect to their electrochemical and photophysical properties. Cyclic and square-wave voltammetry, as well as UV/vis absorption and emission spectroscopy, indicated a negligible electronic interaction of the POM and metal-complex subunits in the ground state. However, emission-quenching experiments suggested an efficient intramolecular electron-transfer process from the photo-excited metal centers to the POM units to account for the non-emissive nature of the dyads (thus, suggesting a strong interaction of the subunits in the excited state). In-depth photophysical investigations, as well as a functional characterization, i.e., the applicability in the HER reaction, are currently ongoing.
Asunto(s)
2,2'-Dipiridil/farmacología , Complejos de Coordinación/farmacología , Fármacos Fotosensibilizantes/farmacología , Compuestos de Tungsteno/farmacología , Teoría Funcional de la Densidad , Electroquímica , Conformación Molecular , Oxidación-Reducción , Fármacos Fotosensibilizantes/síntesis química , Fármacos Fotosensibilizantes/química , Espectroscopía de Protones por Resonancia Magnética , Espectrofotometría Ultravioleta , Compuestos de Tungsteno/síntesis química , Compuestos de Tungsteno/químicaRESUMEN
Conjugated polymers featuring tunable band gaps/positions and tailored active centers, are attractive photoelectrode materials for water splitting. However, their exploration falls far behind their inorganic counterparts. Herein, we demonstrate a molecular engineering strategy for the tailoring aromatic units of conjugated acetylenic polymers from benzene- to thiophene-based. The polarized thiophene-based monomers of conjugated acetylenic polymers can largely extend the light absorption and promote charge separation/transport. The C≡C bonds are activated for catalyzing water reduction. Using on-surface Glaser polycondensation, as-fabricated poly(2,5-diethynylthieno[3,2-b]thiophene) on commercial Cu foam exhibits a record H2 -evolution photocurrent density of 370â µA cm-2 at 0.3â V vs. reversible hydrogen electrode among current cocatalyst-free organic photocathodes (1-100â µA cm-2 ). This approach to modulate the optical, charge transfer, and catalytic properties of conjugated polymers paves a critical way toward high-activity organic photoelectrodes.
RESUMEN
Some animals have basic culture, but to date there is not much evidence that cultural traits evolve as part of a cumulative process as seen in humans. This may be due to limits in animal physical cognition, such as an inability to compare the efficiency of a novel behavioural innovation with an already existing tradition. We investigated this possibility with a study on a natural tool innovation in wild chimpanzees: moss-sponging, which recently emerged in some individuals to extract mineral-rich liquids at a natural clay-pit. The behaviour probably arose as a variant of leaf-sponging, a tool technique seen in all studied chimpanzee communities. We found that moss-sponges not only absorbed more liquid but were manufactured and used more rapidly than leaf-sponges, suggesting a functional improvement. To investigate whether chimpanzees understood the advantage of moss- over leaf-sponges, we experimentally offered small amounts of rainwater in an artificial cavity of a portable log, together with both sponge materials, moss and leaves. We found that established moss-spongers (having used both leaves and moss to make sponges) preferred moss to prepare a sponge to access the rainwater, whereas leaf-spongers (never observed using moss) preferred leaves. Survey data finally demonstrated that moss was common in forest areas near clay-pits but nearly absent in other forest areas, suggesting that natural moss-sponging was at least partly constrained by ecology. Together, these results suggest that chimpanzees perceive functional improvements in tool quality, a crucial prerequisite for cumulative culture.