"Soft" oxidative coupling of methane to ethylene: Mechanistic insights from combined experiment and theory.

The oxidative coupling of methane to ethylene using gaseous disulfur (2CH4 + S2 → C2H4 + 2H2S) as an oxidant (SOCM) proceeds with promising selectivity. Here, we report detailed experimental and theoretical studies that examine the mechanism for the conversion of CH4 to C2H4 over an Fe3O4-derived FeS2 catalyst achieving a promising ethylene selectivity of 33%. We compare and contrast these results with those for the highly exothermic oxidative coupling of methane (OCM) using O2 (2CH4 + O2 → C2H4 + 2H2O). SOCM kinetic/mechanistic analysis, along with density functional theory results, indicate that ethylene is produced as a primary product of methane activation, proceeding predominantly via CH2 coupling over dimeric S-S moieties that bridge Fe surface sites, and to a lesser degree, on heavily sulfided mononuclear sites. In contrast to and unlike OCM, the overoxidized CS2 by-product forms predominantly via CH4 oxidation, rather than from C2 products, through a series of C-H activation and S-addition steps at adsorbed sulfur sites on the FeS2 surface. The experimental rates for methane conversion are first order in both CH4 and S2, consistent with the involvement of two S sites in the rate-determining methane C-H activation step, with a CD4/CH4 kinetic isotope effect of 1.78. The experimental apparent activation energy for methane conversion is 66 ± 8 kJ/mol, significantly lower than for CH4 oxidative coupling with O2 The computed methane activation barrier, rate orders, and kinetic isotope values are consistent with experiment. All evidence indicates that SOCM proceeds via a very different pathway than that of OCM.

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes.

Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

Tailoring Ag Electron Donating Ability for Organohalide Reduction: A Bilayer Electrode Design.

Electrochemical reduction of organohalides provides a green approach in the reduction of environmental pollutants, the synthesis of new organic molecules, and many other applications. The presence of a catalytic electrode can make the process more energetically efficient. Ag is known to be a very good electrode for the reduction of a wide range of organohalides. Herein, we examine the elementary adsorption and reaction steps that occur on Ag and the changes that result from changes in the Ag-coated metal, strain in Ag, solvent, and substrate geometry. The results are used to develop an electrode design strategy that can possibly be used to further increase the catalytic activity of pure Ag electrodes. We have shown how epitaxially depositing one to three layers of Ag on catalytically inert or less active support metal can increase the surface electron donating ability, thus increasing the adsorption of organic halide and the catalytic activity. Many factors, such as molecular geometry, lattice mismatches, work function, and solvents, contribute to the adsorption of organic halide molecules over the bilayer electrode surface. To isolate and rank these factors, we examined three model organic halides, namely, halothane, bromobenzene (BrBz), and benzyl bromide (BzBr) adsorption on Ag/metal (metal = Au, Bi, Pt, and Ti) bilayer electrodes in both vacuum and acetonitrile (ACN) solvent. The different metal supports offer a range of lattice mismatches and work function differences with Ag. Our calculations show that the surface of Ag becomes more electron donating and accessible to adsorption when it forms a bilayer with Ti as it has a lower work function and almost zero lattice mismatch with Ag. We believe this study will help to increase the electron donating ability of the Ag surface by choosing the right metal support, which in turn can improve the catalytic activity of the working electrode.

Oxidation by Reduction: Efficient and Selective Oxidation of Alcohols by the Electrocatalytic Reduction of Peroxydisulfate.

Alcohol oxidation is an important class of reaction that is traditionally performed under harsh conditions and most often requires the use of organometallic compounds or transition metal complexes as catalysts. Here, we introduce a new electrochemical synthetic method, referred to as reductive oxidation, in which alcohol oxidation is initiated by the redox-mediated electrocatalytic reduction of peroxydisulfate to generate the highly oxidizing sulfate radical anion. Thus, and counter-intuitively, alcohol oxidation occurs as a result of an electrochemical reduction reaction. This approach provides a selective synthetic route for the oxidation of alcohols carried out under mild conditions to aldehydes, ketones, and carboxylic acids with up to 99% conversion yields. First-principles density functional theory calculations, ab initio molecular dynamics simulations, cyclic voltammetry, and finite difference simulations are presented that support and provide additional insights into the S2O82--mediated oxidation of benzyl alcohol to benzaldehyde.

Exploring Electrochemical C(sp3)-H Oxidation for the Late-Stage Methylation of Complex Molecules.

The "magic methyl" effect, a dramatic boost in the potency of biologically active compounds from the incorporation of a single methyl group, provides a simple yet powerful strategy employed by medicinal chemists in the drug discovery process. Despite significant advances, methodologies that enable the selective C(sp3)-H methylation of structurally complex medicinal agents remain very limited. In this work, we disclose a modular, efficient, and selective strategy for the α-methylation of protected amines (i.e., amides, carbamates, and sulfonamides) by means of electrochemical oxidation. Mechanistic analysis guided our development of an improved electrochemical protocol on the basis of the classic Shono oxidation reaction, which features broad reaction scope, high functional group compatibility, and operational simplicity. Importantly, this reaction system is amenable to the late-stage functionalization of complex targets containing basic nitrogen groups that are prevalent in medicinally active agents. When combined with organozinc-mediated C-C bond formation, our protocol enabled the direct methylation of a myriad of amine derivatives including those that have previously been explored for the "magic methyl" effect. This synthesis strategy thus circumvents multistep de novo synthesis that is currently necessary to access such compounds and has the potential to accelerate drug discovery efforts.

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces.

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO2 dielectric (70 nm), on which was placed the active layer of 2-4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol-1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBECO of 20 ± 1 kJ mol-1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBECO of 14 ± 1 kJ mol-1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Sulfated Zirconium Metal-Organic Frameworks as Well-Defined Supports for Enhancing Organometallic Catalysis.

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally used materials. One example is sulfated metal oxides, which function as highly active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal-organic frameworks (MOFs) have been targeted as structurally defined analogues. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, Zr6-based MOF NU-1000 is sulfated and characterized using techniques such as single crystal X-ray diffraction in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation and probed through trimethylphosphine oxide physisorption, ammonia sorption, in situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node, and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

Effect of Pd Coordination and Isolation on the Catalytic Reduction of O2 to H2O2 over PdAu Bimetallic Nanoparticles.

The direct synthesis of hydrogen peroxide (H2 + O2 → H2O2) may enable low-cost H2O2 production and reduce environmental impacts of chemical oxidations. Here, we synthesize a series of Pd1Aux nanoparticles (where 0 ≤ x ≤ 220, ∼10 nm) and show that, in pure water solvent, H2O2 selectivity increases with the Au to Pd ratio and approaches 100% for Pd1Au220. Analysis of in situ XAS and ex situ FTIR of adsorbed 12CO and 13CO show that materials with Au to Pd ratios of ∼40 and greater expose only monomeric Pd species during catalysis and that the average distance between Pd monomers increases with further dilution. Ab initio quantum chemical simulations and experimental rate measurements indicate that both H2O2 and H2O form by reduction of a common OOH* intermediate by proton-electron transfer steps mediated by water molecules over Pd and Pd1Aux nanoparticles. Measured apparent activation enthalpies and calculated activation barriers for H2O2 and H2O formation both increase as Pd is diluted by Au, even beyond the complete loss of Pd-Pd coordination. These effects impact H2O formation more significantly, indicating preferential destabilization of transition states that cleave O-O bonds reflected by increasing H2O2 selectivities (19% on Pd; 95% on PdAu220) but with only a 3-fold reduction in H2O2 formation rates. The data imply that the transition states for H2O2 and H2O formation pathways differ in their coordination to the metal surface, and such differences in site requirements require that we consider second coordination shells during the design of bimetallic catalysts.

Site Densities, Rates, and Mechanism of Stable Ni/UiO-66 Ethylene Oligomerization Catalysts.

Nickel-functionalized UiO-66 metal organic frameworks (MOFs) oligomerize ethylene in the absence of cocatalysts or initiators after undergoing ethylene-pressure-dependent transients and maintain stable oligomerization rates for >15 days on stream. Higher ethylene pressures shorten induction periods and engender more active sites for ethylene oligomerization; these sites exhibit invariant selectivity-conversion characteristics to justify that only one type of catalytic center is relevant for oligomerization. The number of active sites is estimated using in situ NO titration to disambiguate the effect of increased reaction rates upon exposure to increasing ethylene pressures. After accounting for augmented site densities with increasing ethylene pressures, ethylene oligomerization is first order in ethylene pressure from 100 to 1800 kPa with an activation energy of 81 kJ mol-1 at temperatures from 443-503 K on Ni/UiO-66. A representative Ni/UiO-66 cluster model that mimics high ethylene pressure process conditions is validated with ab initio thermodynamic analysis, and the Cossee-Arlman mechanism is posited based on comparisons between experimental and computed activation enthalpies from density functional theory calculations on these cluster models of Ni/UiO-66. The insights gained from experiment and theory help rationalize evolution in structure and stability for ethylene oligomerization Ni/UiO-66 MOF catalysts.

N-Ammonium Ylide Mediators for Electrochemical C-H Oxidation.

The site-specific oxidation of strong C(sp3)-H bonds is of uncontested utility in organic synthesis. From simplifying access to metabolites and late-stage diversification of lead compounds to truncating retrosynthetic plans, there is a growing need for new reagents and methods for achieving such a transformation in both academic and industrial circles. One main drawback of current chemical reagents is the lack of diversity with regard to structure and reactivity that prevents a combinatorial approach for rapid screening to be employed. In that regard, directed evolution still holds the greatest promise for achieving complex C-H oxidations in a variety of complex settings. Herein we present a rationally designed platform that provides a step toward this challenge using N-ammonium ylides as electrochemically driven oxidants for site-specific, chemoselective C(sp3)-H oxidation. By taking a first-principles approach guided by computation, these new mediators were identified and rapidly expanded into a library using ubiquitous building blocks and trivial synthesis techniques. The ylide-based approach to C-H oxidation exhibits tunable selectivity that is often exclusive to this class of oxidants and can be applied to real-world problems in the agricultural and pharmaceutical sectors.

Field Effect Modulation of Electrocatalytic Hydrogen Evolution at Back-Gated Two-Dimensional MoS2 Electrodes.

Electrocatalytic activity for hydrogen evolution at monolayer MoS2 electrodes can be enhanced by the application of an electric field normal to the electrode plane. The electric field is produced by a gate electrode lying underneath the MoS2 and separated from it by a dielectric. Application of a voltage to the back-side gate electrode while sweeping the MoS2 electrochemical potential in a conventional manner in 0.5 M H2SO4 results in up to a 140 mV reduction in overpotential for hydrogen evolution at current densities of 50 mA/cm2. Tafel analysis indicates that the exchange current density is correspondingly improved by a factor of four to 0.1 mA/cm2 as gate voltage is increased. Density functional theory calculations support a mechanism in which the higher hydrogen evolution activity is caused by gate-induced increase in the electronic charge on Mo metal centers adjacent to the S vacancies (the active sites), leading to enhanced Mo-H bond strengths. Overall, our findings indicate that the back-gated working electrode architecture is a convenient and versatile platform for investigating the connection between tunable electronic charge at active sites and overpotential for electrocatalytic processes on ultrathin electrode materials.

Electrochemically Driven, Ni-Catalyzed Aryl Amination: Scope, Mechanism, and Applications.

C-N cross-coupling is one of the most valuable and widespread transformations in organic synthesis. Largely dominated by Pd- and Cu-based catalytic systems, it has proven to be a staple transformation for those in both academia and industry. The current study presents the development and mechanistic understanding of an electrochemically driven, Ni-catalyzed method for achieving this reaction of high strategic importance. Through a series of electrochemical, computational, kinetic, and empirical experiments, the key mechanistic features of this reaction have been unraveled, leading to a second generation set of conditions that is applicable to a broad range of aryl halides and amine nucleophiles including complex examples on oligopeptides, medicinally relevant heterocycles, natural products, and sugars. Full disclosure of the current limitations and procedures for both batch and flow scale-ups (100 g) are also described.

Theoretical insights into the sites and mechanisms for base catalyzed esterification and aldol condensation reactions over Cu.

Condensation and esterification are important catalytic routes in the conversion of polyols and oxygenates derived from biomass to fuels and chemical intermediates. Previous experimental studies show that alkanal, alkanol and hydrogen mixtures equilibrate over Cu/SiO2 and form surface alkoxides and alkanals that subsequently promote condensation and esterification reactions. First-principle density functional theory (DFT) calculations were carried out herein to elucidate the elementary paths and the corresponding energetics for the interconversion of propanal + H2 to propanol and the subsequent C-C and C-O bond formation paths involved in aldol condensation and esterification of these mixtures over model Cu surfaces. Propanal and hydrogen readily equilibrate with propanol via C-H and O-H addition steps to form surface propoxide intermediates and equilibrated propanal/propanol mixtures. Surface propoxides readily form via low energy paths involving a hydrogen addition to the electrophilic carbon center of the carbonyl of propanal or via a proton transfer from an adsorbed propanol to a vicinal propanal. The resulting propoxide withdraws electron density from the surface and behaves as a base catalyzing the activation of propanal and subsequent esterification and condensation reactions. These basic propoxides can readily abstract the acidic Cα-H of propanal to produce the CH3CH(-)CH2O* enolate, thus initiating aldol condensation. The enolate can subsequently react with a second adsorbed propanal to form a C-C bond and a ß-alkoxide alkanal intermediate. The ß-alkoxide alkanal can subsequently undergo facile hydride transfer to form the 2-formyl-3-pentanone intermediate that decarbonylates to give the 3-pentanone product. Cu is unique in that it rapidly catalyzes the decarbonylation of the C2n intermediates to form C2n-1 3-pentanone as the major product with very small yields of C2n products. This is likely due to the absence of Brønsted acid sites, present on metal oxide catalysts, that rapidly catalyze dehydration of the hemiacetal or hemiacetalate over decarbonylation. The basic surface propoxide that forms on Cu can also attack the carbonyl of a surface propanal to form propyl propionate. Theoretical results indicate that the rates for both aldol condensation and esterification are controlled by reactions between surface propoxide and propanal intermediates. In the condensation reaction, the alkoxide abstracts the weakly acidic hydrogen of the Cα-H of the adsorbed alkanal to form the surface enolate whereas in the esterification reaction the alkoxide nucleophilically attacks the carbonyl group of a vicinal bound alkanal. As both condensation and esterification involve reactions between the same two species in the rate-limiting step, they result in the same rate expression which is consistent with experimental results. The theoretical results indicate that the barriers between condensation and esterification are within 3 kJ mol-1 of one another with esterification being slightly more favored. Experimental results also report small differences in the activation barriers but suggest that condensation is slightly preferred.

Formation, Migration, and Reactivity of Au-CO Complexes on Gold Surfaces.

We report experimental as well as theoretical evidence that suggests Au-CO complex formation upon the exposure of CO to active sites (step edges and threading dislocations) on a Au(111) surface. Room-temperature scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy, transmission infrared spectroscopy, and density functional theory calculations point to Au-CO complex formation and migration. Room-temperature STM of the Au(111) surface at CO pressures in the range from 10(-8) to 10(-4) Torr (dosage up to 10(6) langmuir) indicates Au atom extraction from dislocation sites of the herringbone reconstruction, mobile Au-CO complex formation and diffusion, and Au adatom cluster formation on both elbows and step edges on the Au surface. The formation and mobility of the Au-CO complex result from the reduced Au-Au bonding at elbows and step edges leading to stronger Au-CO bonding and to the formation of a more positively charged CO (CO(δ+)) on Au. Our studies indicate that the mobile Au-CO complex is involved in the Au nanoparticle formation and reactivity, and that the positive charge on CO increases due to the stronger adsorption of CO at Au sites with lower coordination numbers.

Catalytic consequences of open and closed grafted Al(III)-calix[4]arene complexes for hydride and oxo transfer reactions.

An approach for the control and understanding of supported molecular catalysts is demonstrated with the design and synthesis of open and closed variants of a grafted Lewis acid active site, consisting of Al(III)-calix[4]arene complexes on the surface of silica. The calixarene acts as a molecular template that enforces open and closed resting-state coordination geometries surrounding the metal active sites, due to its lower-rim substituents as well as site isolation by virtue of its steric bulk. These sites are characterized and used to elucidate mechanistic details and connectivity requirements for reactions involving hydride and oxo transfer. The consequence of controlling open versus closed configurations of the grafted Lewis acid site is demonstrated by the complete lack of observed activity of the closed site for Meerwein-Ponndorf-Verley (MPV) reduction; whereas, the open variant of this catalyst has an MPV reduction activity that is virtually identical to previously reported soluble molecular Al(III)-calix[4]arene catalysts. In contrast, for olefin epoxidation using tert-butyl-hydroperoxide as oxidant, the open and closed catalysts exhibit similar activity. This observation suggests that for olefin epoxidation catalysis using Lewis acids as catalyst and organic hydroperoxide as oxidant, covalent binding of the hydroperoxide is not required, and instead dative coordination to the Lewis acid center is sufficient for catalytic oxo transfer. This latter result is supported by density functional theory calculations of the transition state for olefin epoxidation catalysis, using molecular analogs of the open and closed catalysts.

Electric field changes on Au nanoparticles on semiconductor supports--the molecular voltmeter and other methods to observe adsorbate-induced charge-transfer effects in Au/TiO2 nanocatalysts.

Infrared (IR) studies of Au/TiO2 catalyst particles indicate that charge transfer from van der Waals-bound donor or acceptor molecules on TiO2 to or from Au occurs via transport of charge carriers in the semiconductor TiO2 support. The ΔνCO on Au is shown to be proportional to the polarizability of the TiO2 support fully covered with donor or acceptor molecules, producing a proportional frequency shift in νCO. Charge transfer through TiO2 is associated with the population of electron trap sites in the bandgap of TiO2 and can be independently followed by changes in photoluminescence intensity and by shifts in the broad IR absorbance region for electron trap sites, which is also proportional to the polarizability of donors by IR excitation. Density functional theory calculations show that electron transfer from the donor molecules to TiO2 and to supported Au particles produces a negative charge on the Au, whereas the transfer from the Au particles to the TiO2 support into acceptor molecules results in a positive charge on the Au. These changes along with the magnitudes of the shifts are consistent with the Stark effect. A number of experiments show that the ∼3 nm Au particles act as "molecular voltmeters" in influencing ΔνCO. Insulator particles, such as SiO2, do not display electron-transfer effects to Au particles on their surface. These studies are preliminary to doping studies of semiconductor-oxide particles by metal ions which modify Lewis acid/base oxide properties and possibly strongly modify the electron-transfer and catalytic activity of supported metal catalyst particles.

Insights into catalytic oxidation at the Au/TiO(2) dual perimeter sites.

Gold (Au) nanoparticles supported on reducible oxides such as TiO2 demonstrate exceptional catalytic activity for a wide range of gas phase oxidation reactions such as CO oxidation, olefin epoxidation, and water gas shift catalysis. Scientists have recently shifted their hypotheses on the origin of the reactivity of these materials from the unique electronic properties and under-coordinated Au sites on nanometer-sized particles to bifunctional sites at the Au-support interface. In this Account, we summarize our recent experimental and theoretical results to provide insights into the active sites and pathways that control oxidation over Au/TiO2 catalysts. We provide transmission IR spectroscopic data that show the direct involvement of the Au-Ti(4+) dual perimeter sites, and density functional theory results that connect the electronic properties at these sites to their reactivity and to plausible reaction mechanisms. We also show the importance of interfacial Au-Ti(4+) sites in adsorbing and activating O2 as a result of charge transfer from the Au into antibonding states on O2 causing di-σ interactions with interfacial Au-Ti(4+) sites. This results in apparent activation energies for O2 activation of 0.16-0.60 eV thus allowing these materials to operate over a wide range of temperatures (110-420 K) and offering the ability also to control H-H, C-H, and C-O bond scission. At low temperatures (100-130 K), adsorbed O2 directly reacts with co-adsorbed CO or H2. In addition, we observe the specific consumption of CO adsorbed on TiO2. The more strongly held CO/Au species do not react at ∼120 K due to high diffusion barriers that prevent them from reaching active interfacial sites. At higher temperatures, O2 directly dissociates to form active oxygen adatoms (O*) on Au and TiO2. These readily react with bound hydrocarbon intermediates via base-catalyzed nucleophilic attack on unsaturated C═O and C═C bonds or via activation of weakly acidic C-H or O-H bonds. We demonstrate that when the active Au-Ti(4+) sites are pre-occupied by O*, the low temperature CO oxidation rate is reduced by a factor 22. We observe similar site blocking for H2 oxidation by O2, where the reaction at 210 K is quenched by ice formation. At higher temperatures (400-420 K), the O* generated at the perimeter sites is able to diffuse onto the Au particles, which then activate weakly acidic C-H bonds and assist in C-O bond scission. These sites allow for active conversion of adsorbed acetate intermediates on TiO2 (CH3COO/TiO2) to a gold ketenylidene species (Au2═C═C═O). The consecutive C-H bond scission steps appear to proceed by the reaction with basic O* or OH* on the Au sites and C-O bond activation occurs at the Au-Ti(4+) dual perimeter sites. There is a bound-intermediate transfer from the TiO2 support to the Au sites during the course of reaction as the reactant (CH3COO/TiO2) and the product (Au2═C═C═O) are bound to different sites. We demonstrate that IR spectroscopy is a powerful tool to follow surface catalytic reactions and provide kinetic information, while theory provides atomic scale insights into the mechanisms and the active sites that control catalytic oxidation.

Selective catalytic oxidative-dehydrogenation of carboxylic acids-acrylate and crotonate formation at the Au/TiO2 interface.

The oxidative-dehydrogenation of carboxylic acids to selectively produce unsaturated acids at the second and third carbons regardless of alkyl chain length was found to occur on a Au/TiO2 catalyst. Using transmission infrared spectroscopy (IR) and density functional theory (DFT), unsaturated acrylate (H2C═CHCOO) and crotonate (CH3CH═CHCOO) were observed to form from propionic acid (H3CCH2COOH) and butyric acid (H3CCH2CH2COOH), respectively, on a catalyst with ∼3 nm diameter Au particles on TiO2 at 400 K. Desorption experiments also show gas phase acrylic acid is produced. Isotopically labeled (13)C and (12)C propionic acid experiments along with DFT calculated frequency shifts confirm the formation of acrylate and crotonate. Experiments on pure TiO2 confirmed that the unsaturated acids were not produced on the TiO2 support alone, providing evidence that the sites for catalytic activity are at the dual Au-Ti(4+) sites at the nanometer Au particles' perimeter. The DFT calculated energy barriers between 0.3 and 0.5 eV for the reaction pathway are consistent with the reaction occurring at 400 K on Au/TiO2.

CO chemisorption and dissociation at high coverages during CO hydrogenation on Ru catalysts.

Density functional theory (DFT) and infrared spectroscopy results are combined with mechanism-based rate equations to assess the structure and thermodynamics of chemisorbed CO (CO*) and its activation during Fischer-Tropsch synthesis (FTS). CO* binding becomes weaker with increasing coverage on Ru(0001) and Ru201 clusters, but such decreases in binding energy occur at higher coverages on Ru201 clusters than on Ru(0001) surfaces (CO*/Ru = 1.55 to 0.75); such differences appear to reflect weaker repulsive interactions on the curved surfaces prevalent on small Ru201 clusters. Ru201 clusters achieve stable supramonolayer coverages (CO*/Ru > 1) by forming geminal dicarbonyls at low-coordination corner/edge atoms. CO* infrared spectra on Ru/SiO2 (~7 nm diameter) detect mobile adlayers that anneal into denser structures at saturation. Mechanism-based FTS rate equations give activation energies that reflect the CO*-saturated surfaces prevalent during catalysis. DFT-derived barriers show that CO* predominantly reacts at (111) terraces via H-assisted reactions, consistent with measured effects of H2 and CO pressures and cluster size effects on rates and O-rejection selectivities. Barriers are much higher for unassisted CO* dissociation on (111) terraces and low-coordination atoms, including step-edge sites previously proposed as active sites for CO* dissociation during FTS. DFT-derived barriers indicate that unassisted CO* dissociation is irreversible, making such steps inconsistent with measured rates. The modest activation barriers of H-assisted CO* dissociation paths remove a requirement for special low-coordination sites for unassisted CO* activation, which is inconsistent with higher rates on larger clusters. These conclusions seem generally applicable to Co, Fe, and Ru catalysts, which show similar FTS rate equations and cluster size effects. This study also demonstrates the feasibility and relevance of DFT treatments on the curved and crowded cluster surfaces where catalysis occurs.

Consequences of metal-oxide interconversion for C-H bond activation during CH4 reactions on Pd catalysts.

Mechanistic assessments based on kinetic and isotopic methods combined with density functional theory are used to probe the diverse pathways by which C-H bonds in CH4 react on bare Pd clusters, Pd cluster surfaces saturated with chemisorbed oxygen (O*), and PdO clusters. C-H activation routes change from oxidative addition to H-abstraction and then to σ-bond metathesis with increasing O-content, as active sites evolve from metal atom pairs (*-*) to oxygen atom (O*-O*) pairs and ultimately to Pd cation-lattice oxygen pairs (Pd(2+)-O(2-)) in PdO. The charges in the CH3 and H moieties along the reaction coordinate depend on the accessibility and chemical state of the Pd and O centers involved. Homolytic C-H dissociation prevails on bare (*-*) and O*-covered surfaces (O*-O*), while C-H bonds cleave heterolytically on Pd(2+)-O(2-) pairs at PdO surfaces. On bare surfaces, C-H bonds cleave via oxidative addition, involving Pd atom insertion into the C-H bond with electron backdonation from Pd to C-H antibonding states and the formation of tight three-center (H3C···Pd···H)(‡) transition states. On O*-saturated Pd surfaces, C-H bonds cleave homolytically on O*-O* pairs to form radical-like CH3 species and nearly formed O-H bonds at a transition state (O*···CH3(•)···*OH)(‡) that is looser and higher in enthalpy than on bare Pd surfaces. On PdO surfaces, site pairs consisting of exposed Pd(2+) and vicinal O(2-), Pd(ox)-O(ox), cleave C-H bonds heterolytically via σ-bond metathesis, with Pd(2+) adding to the C-H bond, while O(2-) abstracts the H-atom to form a four-center (H3C(δ-)···Pd(ox)···H(δ+)···O(ox))(‡) transition state without detectable Pd(ox) reduction. The latter is much more stable than transition states on *-* and O*-O* pairs and give rise to a large increase in CH4 oxidation turnover rates at oxygen chemical potentials leading to Pd to PdO transitions. These distinct mechanistic pathways for C-H bond activation, inferred from theory and experiment, resemble those prevalent on organometallic complexes. Metal centers present on surfaces as well as in homogeneous complexes act as both nucleophile and electrophile in oxidative additions, ligands (e.g., O* on surfaces) abstract H-atoms via reductive deprotonation of C-H bonds, and metal-ligand pairs, with the pair as electrophile and the metal as nucleophile, mediate σ-bond metathesis pathways.