pH-dependent structural transitions in cationic ionizable lipid mesophases are critical for lipid nanoparticle function.

Lipid nanoparticles (LNPs) are advanced core-shell particles for messenger RNA (mRNA) based therapies that are made of polyethylene glycol (PEG) lipid, distearoylphosphatidylcholine (DSPC), cationic ionizable lipid (CIL), cholesterol (chol), and mRNA. Yet the mechanism of pH-dependent response that is believed to cause endosomal release of LNPs is not well understood. Here, we show that eGFP (enhanced green fluorescent protein) protein expression in the mouse liver mediated by the ionizable lipids DLin-MC3-DMA (MC3), DLin-KC2-DMA (KC2), and DLinDMA (DD) ranks MC3 ≥ KC2 > DD despite similar delivery of mRNA per cell in all cell fractions isolated. We hypothesize that the three CIL-LNPs react differently to pH changes and hence study the structure of CIL/chol bulk phases in water. Using synchrotron X-ray scattering a sequence of ordered CIL/chol mesophases with lowering pH values are observed. These phases show isotropic inverse micellar, cubic Fd3m inverse micellar, inverse hexagonal [Formula: see text] and bicontinuous cubic Pn3m symmetry. If polyadenylic acid, as mRNA surrogate, is added to CIL/chol, excess lipid coexists with a condensed nucleic acid lipid [Formula: see text] phase. The next-neighbor distance in the excess phase shows a discontinuity at the Fd3m inverse micellar to inverse hexagonal [Formula: see text] transition occurring at pH 6 with distinctly larger spacing and hydration for DD vs. MC3 and KC2. In mRNA LNPs, DD showed larger internal spacing, as well as retarded onset and reduced level of DD-LNP-mediated eGFP expression in vitro compared to MC3 and KC2. Our data suggest that the pH-driven Fd3m-[Formula: see text] transition in bulk phases is a hallmark of CIL-specific differences in mRNA LNP efficacy.

Direct Synthesis of CuPd Icosahedra Supercrystals Studied by In Situ X-Ray Scattering.

Nanocrystal self-assembly into supercrystals provides a versatile platform for creating novel materials and devices with tailored properties. While common self-assembly strategies imply the use of purified nanoparticles after synthesis, conversion of chemical precursors directly into nanocrystals and then supercrystals in simple procedures has been rarely reported. Here, the nucleation and growth of CuPd icosahedra and their consecutive assembly into large closed-packed face-centered cubic (fcc) supercrystals are studied. To this end, the study simultaneously and in situ measures X-ray total scattering with pair distribution function analysis (TS-PDF) and small-angle X-ray scattering (SAXS). It is found that the supercrystals' formation is preceded by an intermediate dense phase of nanocrystals displaying short-range order (SRO). It is further shown that the organization of oleic acid/oleylamine surfactants into lamellar structures likely drives the emergence of the SRO phase and later of the supercrystals by reducing the volume accessible to particle diffusion. The supercrystals' formation as well as their disassembly are triggered by temperature. The study demonstrates that ordering of solvent molecules can be crucial in the direct synthesis of supercrystals. The study also provides a general approach to investigate novel preparation routes of supercrystals in situ and across several length scales via X-ray scattering.

Lead-Free, Luminescent Perovskite Nanocrystals Obtained through Ambient Condition Synthesis.

Heterovalently substituting toxic lead is an increasingly popular design strategy to obtain environmentally sustainable variants of the exciting material class of halide perovskites. Perovskite nanocrystals (NCs) obtained through solution-based methods exhibit exceedingly high optical quality. Unfortunately, most of these synthesis routes still require reaction under inert gas and at very high temperatures. Herein a novel synthesis routine for lead-free double perovskite (LFDP) NCs is presented. An approach based upon the hot injection and ligand-assisted reprecipitation (LARP) methods to achieve a low-temperature and ambient atmosphere-based synthesis for manganese-doped Cs2 NaBiCl6 NCs is presented. Mn incorporation is critical for the otherwise non-emissive material, with a 9:1 Bi:Mn precursor ratio maximizing the bright orange photoluminescence (PL) and quantum yield (QY). Higher synthesis temperatures slightly increase the material's performance, yet NCs synthesized at room temperature are still emissive, highlighting the versatility of the synthetic approach. While the material's indirect bandgap limits its appeal for optoelectronics, this feature could benefit photocatalysis due to longer carrier lifetimes. Moreover, the developed synthesis is facile and can rapidly be adapted to other more viable material compositions and up-scaled to realize applications directly.

Photodegradation of CuBi2 O4 Films Evidenced by Fast Formation of Metallic Bi using Operando Surface-sensitive X-ray Scattering.

CuBi2 O4 has recently emerged as a promising photocathode for photo-electrochemical (PEC) water splitting. However, its fast degradation under operation currently poses a limit to its application. Here, we report a novel method to study operando the semiconductor-electrolyte interface during PEC operation by surface-sensitive high-energy X-ray scattering. We find that a fast decrease in the generated photocurrents correlates directly with the formation of a metallic Bi phase. We further show that the slower formation of metallic Cu, as well as the dissolution of the electrode in contact with the electrolyte, further affect the CuBi2 O4 activity and morphology. Our study provides a comprehensive picture of the degradation mechanisms affecting CuBi2 O4 electrodes under operation and poses the methodological basis to investigate the photocorrosion processes affecting a wide range of PEC materials.

3D-printed SAXS chamber for controlled in situ dialysis and optical characterization.

3D printing changes the scope of how samples can be mounted for small-angle X-ray scattering (SAXS). In this paper a 3D-printed X-ray chamber, which allows for in situ exchange of buffer and in situ optical transmission spectroscopy, is presented. The chamber is made of cyclic olefin copolymers (COC), including COC X-ray windows providing ultra-low SAXS background. The design integrates a membrane insert for in situ dialysis of the 100 µl sample volume against a reservoir, which enables measurements of the same sample under multiple conditions using an in-house X-ray setup equipped with a 17.4 keV molybdenum source. The design's capabilities are demonstrated by measuring reversible structural changes in lipid and polymer systems as a function of salt concentration and pH. In the same chambers optical light transmission spectroscopy was carried out measuring the optical turbidity of the mesophases and local pH values using pH-responsive dyes. Microfluidic exchange and optical spectroscopy combined with in situ X-ray scattering enables vast applications for the study of responsive materials.

Optical Membrane Control with Red Light Enabled by Red-Shifted Photolipids.

Photoswitchable phospholipids, or "photolipids", that harbor an azobenzene group in their lipid tails are versatile tools to manipulate and control lipid bilayer properties with light. So far, the limited ultraviolet-A/blue spectral range in which the photoisomerization of regular azobenzene operates has been a major obstacle for biophysical or photopharmaceutical applications. Here, we report on the synthesis of nano- and micrometer-sized liposomes from tetra-ortho-chloro azobenzene-substituted phosphatidylcholine (termed red-azo-PC) that undergoes photoisomerization on irradiation with tissue-penetrating red light (≥630 nm). Photoswitching strongly affects the fluidity and mechanical properties of lipid membranes, although small-angle X-ray scattering and dynamic light scattering measurements reveal only a minor influence on the overall bilayer thickness and area expansion. By controlling the photostationary state and the photoswitching efficiency of red-azo-PC for specific wavelengths, we demonstrate that shape transitions such as budding or pearling and the division of cell-sized vesicles can be achieved. These results emphasize the applicability of red-azo-PC as a nanophotonic tool in synthetic biology and for biomedical applications.

Modular Assembly of Vibrationally and Electronically Coupled Rhenium Bipyridine Carbonyl Complexes on Silicon.

Hybrid inorganic/organic heterointerfaces are promising systems for next-generation photocatalytic, photovoltaic, and chemical-sensing applications. Their performance relies strongly on the development of robust and reliable surface passivation and functionalization protocols with (sub)molecular control. The structure, stability, and chemistry of the semiconductor surface determine the functionality of the hybrid assembly. Generally, these modification schemes have to be laboriously developed to satisfy the specific chemical demands of the semiconductor surface. The implementation of a chemically independent, yet highly selective, standardized surface functionalization scheme, compatible with nanoelectronic device fabrication, is of utmost technological relevance. Here, we introduce a modular surface assembly (MSA) approach that allows the covalent anchoring of molecular transition-metal complexes with sub-nanometer precision on any solid material by combining atomic layer deposition (ALD) and selectively self-assembled monolayers of phosphonic acids. ALD, as an essential tool in semiconductor device fabrication, is used to grow conformal aluminum oxide activation coatings, down to sub-nanometer thicknesses, on silicon surfaces to enable a selective step-by-step layer assembly of rhenium(I) bipyridine tricarbonyl molecular complexes. The modular surface assembly of molecular complexes generates precisely structured spatial ensembles with strong intermolecular vibrational and electronic coupling, as demonstrated by infrared spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy analysis. The structure of the MSA can be chosen to avoid electronic interactions with the semiconductor substrate to exclusively investigate the electronic interactions between the surface-immobilized molecular complexes.

A Lipid Photoswitch Controls Fluidity in Supported Bilayer Membranes.

Supported lipid bilayer (SLB) membranes are key elements to mimic membrane interfaces on a planar surface. Here, we demonstrate that azobenzene photolipids (azo-PC) form fluid, homogeneous SLBs. Diffusion properties of azo-PC within SLBs were probed by fluorescence microscopy and fluorescence recovery after photobleaching. At ambient conditions, we find that the trans-to-cis isomerization causes an increase of the diffusion constant by a factor of two. Simultaneous excitation with two wavelengths and variable intensities furthermore allows to adjust the diffusion constant D continuously. X-ray reflectometry and small-angle scattering measurements reveal that membrane photoisomerization results in a bilayer thickness reduction of ∼0.4 nm (or 10%). While thermally induced back-switching is not observed, we find that the trans bilayer fluidity is increasing with higher temperatures. This change in diffusion constant is accompanied by a red-shift in the absorption spectra. Based on these results, we suggest that the reduced diffusivity of trans-azo-PC is controlled by intermolecular interactions that also give rise to H-aggregate formation in bilayer membranes.

Polymer Nanoreactors Shield Perovskite Nanocrystals from Degradation.

Halide perovskite nanocrystals (NCs) have shown impressive advances, exhibiting optical properties that outpace conventional semiconductor NCs, such as near-unity quantum yields and ultrafast radiative decay rates. Nevertheless, the NCs suffer even more from stability problems at ambient conditions and due to moisture than their bulk counterparts. Herein, we report a strategy of employing polymer micelles as nanoreactors for the synthesis of methylammonium lead trihalide perovskite NCs. Encapsulated by this polymer shell, the NCs display strong stability against water degradation and halide ion migration. Thin films comprising these NCs exhibit a more than 15-fold increase in lifespan in comparison to unprotected NCs in ambient conditions and even survive over 75 days of complete immersion in water. Furthermore, the NCs, which exhibit quantum yields of up to 63% and tunability of the emission wavelength throughout the visible range, show no signs of halide ion exchange. Additionally, heterostructures of MAPI and MAPBr NC layers exhibit efficient Förster resonance energy transfer (FRET), revealing a strategy for optoelectronic integration.

Polymer Lamellae as Reaction Intermediates in the Formation of Copper Nanospheres as Evidenced by In†Situ X-ray Studies.

The classical nucleation theory (CNT) is the most common theoretical framework used to explain particle formation. However, nucleation is a complex process with reaction pathways which are often not covered by the CNT. Herein, we study the formation mechanism of copper nanospheres using in situ X-ray absorption and scattering measurements. We reveal that their nucleation involves coordination polymer lamellae as pre-nucleation structures occupying a local minimum in the reaction energy landscape. Having learned this, we achieved a superior monodispersity for Cu nanospheres of different sizes. This report exemplifies the importance of developing a more realistic picture of the mechanism involved in the formation of inorganic nanoparticles to develop a rational approach to their synthesis.

Probing the Interface Structure of Adhering Cells by Contrast Variation Neutron Reflectometry.

Cellular adhesion is a central element in tissue mechanics, biological cell-cell signaling, and cell motility. In this context, the cell-substrate distance has been investigated in the past by studying natural cells and biomimetic cell models adhering on solid substrates. The amount of water in the membrane substrate gap, however, is difficult to determine. Here, we present a neutron reflectivity (NR) structural study of confluent epithelial cell monolayers on silicon substrates. In order to ensure valid in vitro conditions, we developed a cell culture sample chamber allowing us to grow and cultivate cells under proper cell culture conditions while performing in vitro neutron reflectivity measurements. The cell chamber also enabled perfusion with cell medium and hence allowed for contrast variation in situ by sterile exchange of buffer with different H2O-to-D2O ratio. Contrast variation reduces the ambiguity of data modeling for determining the thickness and degree of hydration of the interfacial cleft between the adherent cells and the substrate. Our data suggest a three-layer interfacial organization. The first layer bound to the silicon surface interface is in agreement with a very dense protein film with a thickness of 9 ± 2 nm, followed by a highly hydrated 24 ± 4 nm thick layer, and a several tens of nanometers thick layer attributed to the composite membrane. Hence, the results provide clear evidence of a highly hydrated intermediate region between the composite cell membrane and the substrate, reminiscent of the basal lamina.

Position Accuracy of Gold Nanoparticles on DNA Origami Structures Studied with Small-Angle X-ray Scattering.

DNA origami objects allow for accurate positioning of guest molecules in three dimensions. Validation and understanding of design strategies for particle attachment as well as analysis of specific particle arrangements are desirable. Small-angle X-ray scattering (SAXS) is suited to probe distances of nano-objects with subnanometer resolution at physiologically relevant conditions including pH and salt and at varying temperatures. Here, we show that the pair density distribution function (PDDF) obtained from an indirect Fourier transform of SAXS intensities in a model-free way allows to investigate prototypical DNA origami-mediated gold nanoparticle (AuNP) assemblies. We analyze the structure of three AuNP-dimers on a DNA origami block, an AuNP trimer constituted by those dimers, and a helical arrangement of nine AuNPs on a DNA origami cylinder. For the dimers, we compare the model-free PDDF and explicit modeling of the SAXS intensity data by superposition of scattering intensities of the scattering objects. The PDDF of the trimer is verified to be a superposition of its dimeric contributions, that is, here AuNP-DNA origami assemblies were used as test boards underlining the validity of the PDDF analysis beyond pairs of AuNPs. We obtain information about AuNP distances with an uncertainty margin of 1.2 nm. This readout accuracy in turn can be used for high precision placement of AuNP by careful design of the AuNP attachment sites on the DNA-structure and by fine-tuning of the connector types.

Lipid Monolayer Formation and Lipid Exchange Monitored by a Graphene Field-Effect Transistor.

Anionic and cationic lipids are key molecules involved in many cellular processes; their distribution in biomembranes is highly asymmetric, and their concentration is well-controlled. Graphene solution-gated field-effect transistors (SGFETs) exhibit high sensitivity toward the presence of surface charges. Here, we establish conditions that allow the observation of the formation of charged lipid layers on solution-gated field-effect transistors in real time. We quantify the electrostatic screening of electrolyte ions and derive a model that explains the influence of charged lipids on the ion sensitivity of graphene SGFETs. The electrostatic model is validated using structural information from X-ray reflectometry measurements, which show that the lipid monolayer forms on graphene. We demonstrate that SGFETs can be used to detect cationic lipids by self-exchange of lipids. Furthermore, SGFETs allow measuring the kinetics of layer formation induced by vesicle fusion or spreading from a reservoir. Because of the high transconductance and low noise of the electrical readout, we can observe characteristic conductance spikes that we attribute to bouncing-off events of lipid aggregates from the SGFET surface, suggesting a great potential of graphene SGFETs to measure the on-off kinetics of small aggregates interacting with supported layers.

Nanostructures in n-Octanol Equilibrated with Additives and/or Water.

Fluid fatty alcohols are believed to be nanostructured but broadly amorphous (i.e., noncrystalline) fluids and solvents, including the most popular fatty tissue mimetic, hydrated n-octanol (i.e., hydro-octanol). To check this premise, we studied dry octanol and hydro-octanol as a model of relatively short fluid n-alkanols with small-angle X-ray scattering (SAXS). We also combined this alkanol with the matching alkane (i.e., octane) and with a common anti-inflammatory pain killer (ketoprofen). This revealed that (hydro-)octanol and arguably any other short fatty alcohol form a mesophase. Its basic structural motif are regularly packed polar nanoclusters, reflected in the inner peak in the SAXS diffractogram of (hydro-)octanol and other fluid n-alkanols. The nanoclusters arguably resemble tiny, (inverse) hydrated bilayer fragments, located on a thermally smeared para-crystalline lattice. Additives to hydro-octanol can change the nanoclusters only moderately, if at all. For example, octane and the drug ketoprofen added to hydro-octanol enlarge the nanoclusters only little because of the mixture's packing frustration. To associate with and to bring more water into hydro-octanol, an additive must hence transform the nanoclusters: it expands them into irregularly distributed aqueous lacunae that form a proto-microemulsion, reflected in the previously unknown Guinier's SAXS signal. A "weak" (i.e., a weakly polar or nonpolar) additive can moreover create only size-limited lacunae. Coexistence of nanoclusters and lacunae as well as size variability of the latter in hydro-octanol subvert the concept of octanol-water partition coefficient, which relies on the studied compartment homogeneity. In turn, it opens new possibilities for interfacial catalysis. Reinterpreting "octanol-water partition coefficient" data in terms of octanol-water association or binding constant(s) could furthermore diminish the variability of molecular lipophilicity description and pave the ground toward a more precise theoretical quantification and prediction of molecular properties.

Shape and Interhelical Spacing of DNA Origami Nanostructures Studied by Small-Angle X-ray Scattering.

Scaffolded DNA origami nanostructures enable the self-assembly of arbitrarily shaped objects with unprecedented accuracy. Yet, varying physiological conditions are prone to induce slight structural changes in the nanoscale architecture. Here, we report on high precision measurements of overall shape and interhelical distance of three prototypic DNA origami structures in solution using synchrotron small-angle X-ray scattering. Sheet-, brick-, and cylinder-shaped DNA constructs were assembled and the shape factors determined with angstrom resolution from fits to the scattering profiles. With decreasing MgCl2 concentration electrostatic swelling of both shape cross section and interhelical DNA spacing of the DNA origami structures is observed. The structures tolerate up to 10% interhelical expansion before they disintegrate. In contrast, with increasing temperature, the cylinder-shaped structures show no thermal expansion in a wide temperature window before they abruptly melt above 50 °C. Details on molecular structure of DNA origami can also be obtained using in-house X-ray scattering equipment and, hence, allow for routine folding and stability testing of DNA-based agents that are designed to operate under varying salt conditions.

Quantum Size Effect in Organometal Halide Perovskite Nanoplatelets.

Organometal halide perovskites have recently emerged displaying a huge potential for not only photovoltaic, but also light emitting applications. Exploiting the optical properties of specifically tailored perovskite nanocrystals could greatly enhance the efficiency and functionality of applications based on this material. In this study, we investigate the quantum size effect in colloidal organometal halide perovskite nanoplatelets. By tuning the ratio of the organic cations used, we can control the thickness and consequently the photoluminescence emission of the platelets. Quantum mechanical calculations match well with the experimental values. We find that not only do the properties of the perovskite, but also those of the organic ligands play an important role. Stacking of nanoplatelets leads to the formation of minibands, further shifting the bandgap energies. In addition, we find a large exciton binding energy of up to several hundreds of meV for nanoplatelets thinner than three unit cells, partially counteracting the blueshift induced by quantum confinement. Understanding of the quantum size effects in perovskite nanoplatelets and the ability to tune them provide an additional method with which to manipulate the optical properties of organometal halide perovskites.

Chromium/scandium multilayer mirrors for isolated attosecond pulses at 145 eV.

Recent advances in the development of attosecond soft x-ray sources toward photon wavelengths below 10 nm are also driving the development of suited broadband multilayer optics for steering and shaping attosecond pulses. We demonstrate that current attosecond experiments in the sub-200-eV range benefit from these improved optics. We present our achievements in utilizing ion-beam-deposited chromium/scandium (Cr/Sc) multilayer mirrors, optimized by tailored material dependent deposition and interface polishing, for the generation of single attosecond pulses from a high-harmonic cut-off spectrum at a central energy of 145 eV. Isolated attosecond pulses have been measured by soft x-ray-pump/NIR-probe electron streaking experiments and characterized using frequency-resolved optical gating for complete reconstruction of attosecond bursts (FROG/CRAB). The results demonstrate that Cr/Sc multilayer mirrors can be used as efficient attosecond optics for reflecting 600-attosecond pulses at a photon energy of 145 eV, which is a prerequisite for present and future attosecond experiments in this energy range.

A highly-ordered 3D covalent fullerene framework.

A highly-ordered 3D covalent fullerene framework is presented with a structure based on octahedrally functionalized fullerene building blocks in which every fullerene is separated from the next by six functional groups and whose mesoporosity is controlled by cooperative self-assembly with a liquid-crystalline block copolymer. The new fullerene-framework material was obtained in the form of supported films by spin coating the synthesis solution directly on glass or silicon substrates, followed by a heat treatment. The fullerene building blocks coassemble with a liquid-crystalline block copolymer to produce a highly ordered covalent fullerene framework with orthorhombic Fmmm symmetry, accessible 7.5 nm pores, and high surface area, as revealed by gas adsorption, NMR spectroscopy, small-angle X-ray scattering (SAXS), and TEM. We also note that the 3D covalent fullerene framework exhibits a dielectric constant significantly lower than that of the nonporous precursor material.

Ion polished Cr/Sc attosecond multilayer mirrors for high water window reflectivity.

Recent advances in the development of attosecond soft X-ray sources ranging into the water window spectral range, between the 1s states of carbon and oxygen (284 eV-543 eV), are also driving the development of suited broadband multilayer optics for steering and shaping attosecond pulses. The relatively low intensity of current High Harmonic Generation (HHG) soft X-ray sources calls for an efficient use of photons, thus the development of low-loss multilayer optics is of uttermost importance. Here, we report about the realization of broadband Cr/Sc attosecond multilayer mirrors with nearly atomically smooth interfaces by an optimized ion beam deposition and assisted interface polishing process. This yields to our knowledge highest multilayer mirror reflectivity at 300 eV near normal incidence. The results are verified by transmission electron microscopy (TEM) and soft/hard X-ray reflectometry.

Highly hydrated deformable polyethylene glycol-tethered lipid bilayers.

The realization of a solid-supported lipid bilayer acting as a workbench for the study of membrane processes is a difficult task. For robustness, the bilayer has to be tethered to the substrate. At the same time, diffusion of the lipids and plastic deformations of the membrane should not be obstructed. Furthermore, a highly hydrated surrounding is mandatory. Here, we show that grafting of a polyethylene glycol-lipid construct (PEG2000-DSPE) to a silicon oxide surface via multiple-step silane chemistry and subsequent deposition of lipids by spin-coating result in a cushioned membrane that has the desired properties. Neutron and X-ray reflectometry measurements are combined to access thickness, density, and hydration of the bilayer and the PEG cushion. We observe a spacer of 55 Å thickness between lipid bilayer and silicon-oxide surface with a rather high hydration of up to 90 ± 3% water. While 11.5 ± 3% of the lipids are grafted to the surface, as determined from the neutron data, the diffusion constant of the lipids, as probed by diffusion of 0.5% Texas Red labeled lipids, remains rather large (D = 2.1 ± 0.1 µm(2)/s), which is a reduction of only 12% compared to a supported lipid bilayer reference without immobilized lipids. Finally, AFM indentation confirms the plastic behavior of the membrane against deformation. We show that rupture of the bilayer does not occur before the deformation exceeds 40 Å. Altogether, the presented PEG-tethered lipid bilayer mimics the deformability of natural cell membranes much better than standard solid-supported lipid bilayers.