Serum cystatin C and inflammatory factors related to COVID-19 consequences.

BACKGROUND: Besides impaired respiratory function and immune system, COVID-19 can affect renal function from elevated blood urea nitrogen (BUN) or serum creatinine (sCr) levels to acute kidney injury (AKI) and renal failure. This study aims to investigate the relationship between Cystatin C and other inflammatory factors with the consequences of COVID-19. METHODS: A total of 125 patients with confirmed Covid-19 pneumonia were recruited in this cross-sectional study from March 2021 to May 2022 at Firoozgar educational hospital in Tehran, Iran. Lymphopenia was an absolute lymphocyte count of less than 1.5 × 109/L. AKI was identified as elevated serum Cr concentration or reduced urine output. Pulmonary consequences were evaluated. Mortality was recorded in the hospital one and three months after discharge. The effect of baseline biochemical and inflammatory factors on odds of death was examined. SPSS, version 26, was used for all analyses. P-vale less than 0.05 was considered significant. RESULTS: The highest amount of co-morbidities was attributed to COPD (31%; n = 39), dyslipidemia and hypertension (27%; n = 34 for each) and diabetes (25%; n = 31). The mean baseline cystatin C level was 1.42 ± 0.93 mg/L, baseline creatinine was 1.38 ± 0.86 mg/L, and baseline NLR was 6.17 ± 4.50. Baseline cystatin C level had a direct and highly significant linear relationship with baseline creatinine level of patients (P < 0.001; r: 0.926). ). The average score of the severity of lung involvement was 31.42 ± 10.80. There is a direct and highly significant linear relationship between baseline cystatin C level and lung involvement severity score (r = 0.890, P < 0.001). Cystatin C has a higher diagnostic power in predicting the severity of lung involvement (B = 3.88 ± 1.74, p = 0.026). The mean baseline cystatin C level in patients with AKI was 2.41 ± 1.43 mg/L and significantly higher than patients without AKI (P > 0.001). 34.4% (n = 43) of patients expired in the hospital, and the mean baseline cystatin C level of this group of patients was 1.58 ± 0.90 mg/L which was significantly higher than other patients (1.35 ± 0.94 mg/L, P = 0.002). CONCLUSION: cystatin C and other inflammatory factors such as ferritin, LDH and CRP can help the physician predict the consequences of COVID-19. Timely diagnosis of these factors can help reduce the complications of COVID-19 and better treat this disease. More studies on the consequences of COVID-19 and knowing the related factors will help treat the disease as well as possible.

Association of breast cancer risk, density, and stiffness: global tissue stiffness on breast MR elastography (MRE).

PURPOSE: Quantify in vivo biomechanical tissue properties in various breast densities and in average risk and high-risk women using Magnetic Resonance Imaging (MRI)/MRE and examine the association between breast biomechanical properties and cancer risk based on patient demographics and clinical data. METHODS: Patients with average risk or high-risk of breast cancer underwent 3.0 T breast MR imaging and elastography. Breast parenchymal enhancement (BPE), density (from most recent mammogram), stiffness, elasticity, and viscosity were recorded. Within each breast density group (non-dense versus dense), stiffness, elasticity, and viscosity were compared across risk groups (average versus high). Separately for stiffness, elasticity, and viscosity, a multivariable logistic regression model was used to evaluate whether the MRE parameter predicted risk status after controlling for clinical factors. RESULTS: 50 average risk and 86 high-risk patients were included. Risk groups were similar in age, density, and menopausal status. Among patients with dense breasts, mean stiffness, elasticity, and viscosity were significantly higher in high-risk patients (N = 55) compared to average risk patients (N = 34; all p < 0.001). Stiffness remained a significant predictor of risk status (OR = 4.26, 95% CI [1.96, 9.25]) even after controlling for breast density, BPE, age, and menopausal status. Similar results were seen for elasticity and viscosity. CONCLUSION: A structurally based, quantitative biomarker of tissue stiffness obtained from MRE is associated with differences in breast cancer risk in dense breasts. Tissue stiffness could provide a novel prognostic marker to help identify high-risk women with dense breasts who would benefit from increased surveillance and/or risk reduction measures.

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers*.

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G') of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.

Serum level of Vitamin D is associated with COVID-19 mortality rate in hospitalized patients.

BACKGROUND: Due to widespread of coronavirus disease 2019 (COVID-19) infection, identification of its risk factors and clinical characteristics are important. The aim of the present study was to assess Vitamin D levels in individuals with severe acute respiratory syndrome coronavirus-19 infection and to report on its potential as a predictive marker. MATERIALS AND METHODS: All patients, diagnosed with COVID-19 infection from February 16 to March 21, 2020, and referred to Firoozgar Hospital, Tehran, Iran, were enrolled in this study. Vitamin D analysis was undertaken on patient serum samples using a commercial kit (Pars Azmoon Co., Tehran, Iran). SPSS v. 22 was used for statistical analysis. RESULTS: Vitamin D serum concentration was analyzed in a total of 317 patients whose mean age ± standard deviation was 62.05 ± 15 years and with 62.5% being male. A significant association of Vitamin D level and death was observed. Higher levels of serum Vitamin D had protection against death (odds ratio = 0.955 [95% confidence interval = 0.923-0.988], P = 0.008). CONCLUSION: As a preliminary study in the Iranian population who suffered COVID-19 disease, we identified that Vitamin D deficiency was associated with a higher death rate and intensive care unit admission.

Cutaneous hemorrhagic bullae in a patient with COVID-19: A case report.

COVID-19 was first discovered in Wuhan, China, and has spread rapidly around the world. The most important manifestation of COVID-19 was ARDS-like lung injury at first, but the involvement of other organs, such as kidney, heart, liver, and skin, was gradually reported. It is important to report and share all atypical manifestations of this disease to help other physicians to gain more knowledge about this new viral disease. As mentioned, there are also studies that show different types of cutaneous involvement in these patients, but due to the lack of more detailed studies in this field, and on the other hand, the possible usefulness of skin lesions as a diagnostic or alarming sign in the COVID-19 era, in this study we report a COVID-19 patient with a large hemorrhagic blister similar to sepsis-induced skin lesion. Despite the lack of common symptoms of the disease, the lung scan of the patient was positive for COVID-19.

Identification of Mucorales in patients with proven invasive mucormycosis by polymerase chain reaction in tissue samples.

BACKGROUND: Accurate diagnosis of mucormycosis, a life-threatening fungal infection, remains a challenge for physicians. OBJECTIVES: To identify the causative Mucorales in fresh clinical samples and formalin-fixed paraffin-embedded (FFPE) samples of patients with proven mucormycosis by molecular method. PATIENTS/METHODS: Fresh clinical samples of patients with proven mucormycosis according to the EORTC/MSG criteria admitted between 2015 and 2017 and histopathologically proven FFPE archives collected during 2004-2007 and 2015-2017 from Mazandaran University-affiliated hospitals of northern Iran were included. Seminested PCR targeting the 18S rDNA of Mucorales and ITS region was performed, and PCR products were then sequenced. RESULTS: While culture was positive only in 5 of 9 (56%) of fresh specimen cases, PCR was positive in all 9 (100%) histologically proven mucormycosis. Ten of 18 (56%) FFPE samples were PCR-positive. Overall, Mucorales PCR was positive in 19 of 27 (70%) samples. Mucorales species were Rhizopus arrhizus in 16 (84%) cases, R. arrhizus/Amylomyces rouxii in 2 (10.5%) cases and Rhizopus stolonifer in one case (5.5%). Among 27 mucormycosis cases, 25 (93%) cases were rhinocerebral, and 2 (7%) cases were disseminated. Diabetes mellitus (74%) and neutropaenia (63%) were the main risk factors. CONCLUSIONS: Seminested PCR targeting 18S rDNA region of Mucorales is useful for identification of the causative agents of mucormycosis.

Bioprinting technologies for disease modeling.

There is a great need for the development of biomimetic human tissue models that allow elucidation of the pathophysiological conditions involved in disease initiation and progression. Conventional two-dimensional (2D) in vitro assays and animal models have been unable to fully recapitulate the critical characteristics of human physiology. Alternatively, three-dimensional (3D) tissue models are often developed in a low-throughput manner and lack crucial native-like architecture. The recent emergence of bioprinting technologies has enabled creating 3D tissue models that address the critical challenges of conventional in vitro assays through the development of custom bioinks and patient derived cells coupled with well-defined arrangements of biomaterials. Here, we provide an overview on the technological aspects of 3D bioprinting technique and discuss how the development of bioprinted tissue models have propelled our understanding of diseases' characteristics (i.e. initiation and progression). The future perspectives on the use of bioprinted 3D tissue models for drug discovery application are also highlighted.

Reduced Graphene Oxide-GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering.

Biomaterials currently used in cardiac tissue engineering have certain limitations, such as lack of electrical conductivity and appropriate mechanical properties, which are two parameters playing a key role in regulating cardiac cell behavior. Here, the myocardial tissue constructs are engineered based on reduced graphene oxide (rGO)-incorporated gelatin methacryloyl (GelMA) hybrid hydrogels. The incorporation of rGO into the GelMA matrix significantly enhances the electrical conductivity and mechanical properties of the material. Moreover, cells cultured on composite rGO-GelMA scaffolds exhibit better biological activities such as cell viability, proliferation, and maturation compared to ones cultured on GelMA hydrogels. Cardiomyocytes show stronger contractility and faster spontaneous beating rate on rGO-GelMA hydrogel sheets compared to those on pristine GelMA hydrogels, as well as GO-GelMA hydrogel sheets with similar mechanical property and particle concentration. Our strategy of integrating rGO within a biocompatible hydrogel is expected to be broadly applicable for future biomaterial designs to improve tissue engineering outcomes. The engineered cardiac tissue constructs using rGO incorporated hybrid hydrogels can potentially provide high-fidelity tissue models for drug studies and the investigations of cardiac tissue development and/or disease processes in vitro.

Microfabrication of Cell-Laden Hydrogels for Engineering Mineralized and Load Bearing Tissues.

Microengineering technologies and advanced biomaterials have extensive applications in the field of regenerative medicine. In this chapter, we review the integration of microfabrication techniques and hydrogel-based biomaterials in the field of dental, bone, and cartilage tissue engineering. We primarily discuss the major features that make hydrogels attractive candidates to mimic extracellular matrix (ECM), and we consider the benefits of three-dimensional (3D) culture systems for tissue engineering applications. We then focus on the fundamental principles of microfabrication techniques including photolithography, soft lithography and bioprinting approaches. Lastly, we summarize recent research on microengineering cell-laden hydrogel constructs for dental, bone and cartilage regeneration, and discuss future applications of microfabrication techniques for load-bearing tissue engineering.

Layer-by-layer assembly of 3D tissue constructs with functionalized graphene.

Carbon-based nanomaterials have been considered as promising candidates to mimic certain structure and function of native extracellular matrix materials for tissue engineering. Significant progress has been made in fabricating carbon nanoparticle-incorporated cell culture substrates, but limited studies have been reported on the development of three-dimensional (3D) tissue constructs using these nanomaterials. Here, we present a novel approach to engineer 3D multi-layered constructs using layer-by-layer (LbL) assembly of cells separated with self-assembled graphene oxide (GO)-based thin films. The GO-based structures are shown to serve as cell adhesive sheets that effectively facilitate the formation of multi-layer cell constructs with interlayer connectivity. By controlling the amount of GO deposited in forming the thin films, the thickness of the multi-layer tissue constructs could be tuned with high cell viability. Specifically, this approach could be useful for creating dense and tightly connected cardiac tissues through the co-culture of cardiomyocytes and other cell types. In this work, we demonstrated the fabrication of stand-alone multi-layer cardiac tissues with strong spontaneous beating behavior and programmable pumping properties. Therefore, this LbL-based cell construct fabrication approach, utilizing GO thin films formed directly on cell surfaces, has great potential in engineering 3D tissue structures with improved organization, electrophysiological function, and mechanical integrity.

A novel antifungal nanoemulsion based on reuterin-assisted synergistic essential oils: Preparation and in vitro/in vivo characterization.

This research aimed to develop, optimize, and evaluate a new antifungal nanoemulsion system based on the crude reuterin-synergistic essential oils (EOs) hybrid to overcome the EOs application limits. At first, the antifungal effects of the Lactobacillus plantarum and Lactobacillus reuteri cell-free extracts (CFE) were tested against the Botrytis cinerea, Penicillium expansum, and Alternaria alternata as indicator fungus using broth microdilution method. The L. reuteri CFE with the MIC of 125 µL/mL for B. cinerea and 250 µL/mL for P. expansum and A. alternata showed more inhibitory effects than L. plantarum. Next, reuterin as a significant antibacterial compound in the L. reuteri CFE was induced in glycerol-containing culture media. To reach a nanoemulsion with maximum antifungal activity and stability, the reuterin concentration, Tween 80 %, and ultrasound time were optimized using response surface methodology (RSM) with a volumetric constant ratio of 5 % v/v oil phase including triple synergistic EOs (thyme, cinnamon, and rosemary) at MIC concentrations. Based on the Box-Behnken Design, the maximum antifungal effect was observed in the treatment with 40 mM reuterin, 1 % Tween 80, and 3 min of ultrasound. The growth inhibitory diameter zones of B. cinerea, P. expansum, and A. alternata were estimated 6.15, 4.25, and 4.35 cm in optimum nanoemulsion, respectively. Also, the minimum average particle size diameter (16.3 nm) was observed in nanoemulsion with reuterin 40 mM, Tween 80 5 %, and 3 min of ultrasound treatment. Zeta potential was relatively high within -30 mV range in all designed nanoemulsions which indicates the nanoemulsion's stability. Also, the prepared nanoemulsions, despite initial particle size showed good stability in a 90-d storage period at 25 °C. In vivo assay, showed a significant improvement in the protection of apple fruit treated with reuterin-EOs nanoemulsions against fungal spoilage compared to free reuterin nanoemulsion. Treatment of apples with nanoemulsion containing 40 mM reuterin showed a maximum inhibitory effect on B. cinerea (5.1 mm lesion diameter compared to 29.2 mm for control fruit) within 7 d at 25 °C. In summary, the present study demonstrated that reuterin-synergistic EOs hybrid with boosted antifungal activities can be considered as a biopreservative for food applications.

Engineered Tumor-Immune Microenvironment On A Chip to Study T Cell-Macrophage Interaction in Breast Cancer Progression.

Evolving knowledge about the tumor-immune microenvironment (TIME) is driving innovation in designing novel therapies against hard-to-treat breast cancer. Targeting the immune components of TIME has emerged as a promising approach for cancer therapy. While recent immunotherapies aim at restoring antitumor immunity, counteracting tumor escape remains challenging. Hence there is a pressing need to better understand the complex tumor-immune crosstalk within TIME. Considering this imperative, this study aims at investigating the crosstalk between the two abundant immune cell populations within the breast TIME-macrophages and T cells, in driving tumor progression using an organotypic 3D in vitro tumor-on-a-chip (TOC) model. The TOC features distinct yet interconnected organotypic tumor and stromal entities. This triculture platform mimics the complex TIME, embedding the two immune populations in a suitable 3D matrix. Analysis of invasion, morphometric measurements, and flow cytometry results underscores the substantial contribution of macrophages to tumor progression, while the presence of T cells is associated with a deceleration in the migratory behavior of both cancer cells and macrophages. Furthermore, cytokine analyses reveal significant upregulation of leptin and RANTES (regulated on activation, normal T Cell expressed and secreted) in triculture. Overall, this study highlights the complexity of TIME and the critical role of immune cells in cancer progression.

Engineered 3D ex vivo models to recapitulate the complex stromal and immune interactions within the tumor microenvironment.

Cancer thrives in a complex environment where interactions between cellular and acellular components, surrounding the tumor, play a crucial role in disease development and progression. Despite significant progress in cancer research, the mechanism driving tumor growth and therapeutic outcomes remains elusive. Two-dimensional (2D) cell culture assays and in vivo animal models are commonly used in cancer research and therapeutic testing. However, these models suffer from numerous shortcomings including lack of key features of the tumor microenvironment (TME) & cellular composition, cost, and ethical clearance. To that end, there is an increased interest in incorporating and elucidating the influence of TME on cancer progression. Advancements in 3D-engineered ex vivo models, leveraging biomaterials and microengineering technologies, have provided an unprecedented ability to reconstruct native-like bioengineered cancer models to study the heterotypic interactions of TME with a spatiotemporal organization. These bioengineered cancer models have shown excellent capabilities to bridge the gap between oversimplified 2D systems and animal models. In this review article, we primarily provide an overview of the immune and stromal cellular components of the TME and then discuss the latest state-of-the-art 3D-engineered ex vivo platforms aiming to recapitulate the complex TME features. The engineered TME model, discussed herein, are categorized into three main sections according to the cellular interactions within TME: (i) Tumor-Stromal interactions, (ii) Tumor-Immune interactions, and (iii) Complex TME interactions. Finally, we will conclude the article with a perspective on how these models can be instrumental for cancer translational studies and therapeutic testing.

Engineered Gold and Silica Nanoparticle-Incorporated Hydrogel Scaffolds for Human Stem Cell-Derived Cardiac Tissue Engineering.

Electrically conductive biomaterials and nanomaterials have demonstrated great potential in the development of functional and mature cardiac tissues. In particular, gold nanomaterials have emerged as promising candidates due to their biocompatibility and ease of fabrication for cardiac tissue engineering utilizing rat- or stem cell-derived cardiomyocytes (CMs). However, despite significant advancements, it is still not clear whether the enhancement in cardiac tissue function is primarily due to the electroconductivity features of gold nanoparticles or the structural changes of the scaffold resulting from the addition of these nanoparticles. To address this question, we developed nanoengineered hydrogel scaffolds comprising gelatin methacrylate (GelMA) embedded with either electrically conductive gold nanorods (GNRs) or nonconductive silica nanoparticles (SNPs). This enabled us to simultaneously assess the roles of electrically conductive and nonconductive nanomaterials in the functionality and fate of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). Our studies revealed that both GNR- and SNP-incorporated hydrogel scaffolds exhibited excellent biocompatibility and similar cardiac cell attachment. Although the expression of sarcomere alpha-actinin did not significantly differ among the conditions, a more organized sarcomere structure was observed within the GNR-embedded hydrogels compared to the nonconductive nanoengineered scaffolds. Furthermore, electrical coupling was notably improved in GNR-embedded scaffolds, as evidenced by the synchronous calcium flux and enhanced calcium transient intensity. While we did not observe a significant difference in the gene expression profile of human cardiac tissues formed on the conductive GNR- and nonconductive SNP-incorporated hydrogels, we noticed marginal improvements in the expression of some calcium and structural genes in the nanomaterial-embedded hydrogel groups as compared to the control condition. Given that the cardiac tissues formed atop the nonconductive SNP-based scaffolds (used as the control for conductivity) also displayed similar levels of gene expression as compared to the conductive hydrogels, it suggests that the electrical conductivity of nanomaterials (i.e., GNRs) may not be the sole factor influencing the function and fate of hiPSC-derived cardiac tissues when cells are cultured atop the scaffolds. Overall, our findings provide additional insights into the role of electrically conductive gold nanoparticles in regulating the functionalities of hiPSC-CMs.

Highly Elastic Micropatterned Hydrogel for Engineering Functional Cardiac Tissue.

Heart failure is a major international health issue. Myocardial mass loss and lack of contractility are precursors to heart failure. Surgical demand for effective myocardial repair is tempered by a paucity of appropriate biological materials. These materials should conveniently replicate natural human tissue components, convey persistent elasticity, promote cell attachment, growth and conformability to direct cell orientation and functional performance. Here, microfabrication techniques are applied to recombinant human tropoelastin, the resilience-imparting protein found in all elastic human tissues, to generate photocrosslinked biological materials containing well-defined micropatterns. These highly elastic substrates are then used to engineer biomimetic cardiac tissue constructs. The micropatterned hydrogels, produced through photocrosslinking of methacrylated tropoelastin (MeTro), promote the attachment, spreading, alignment, function, and intercellular communication of cardiomyocytes by providing an elastic mechanical support that mimics their dynamic mechanical properties in vivo. The fabricated MeTro hydrogels also support the synchronous beating of cardiomyocytes in response to electrical field stimulation. These novel engineered micropatterned elastic gels are designed to be amenable to 3D modular assembly and establish a versatile, adaptable foundation for the modeling and regeneration of functional cardiac tissue with potential for application to other elastic tissues.

Nanoengineering of gold nanoribbon-embedded isogenic stem cell-derived cardiac organoids.

Cardiac tissue engineering is an emerging field providing tools to treat and study cardiovascular diseases (CVDs). In the past years, the integration of stem cell technologies with micro- and nanoengineering techniques has enabled the creation of novel engineered cardiac tissues (ECTs) with potential applications in disease modeling, drug screening, and regenerative medicine. However, a major unaddressed limitation of stem cell-derived ECTs is their immature state, resembling a neonatal phenotype and genotype. The modulation of the cellular microenvironment within the ECTs has been proposed as an efficient mechanism to promote cellular maturation and improve features such as cellular coupling and synchronization. The integration of biological and nanoscale cues in the ECTs could serve as a tool for the modification and control of the engineered tissue microenvironment. Here we present a proof-of-concept study for the integration of biofunctionalized gold nanoribbons (AuNRs) with hiPSC-derived isogenic cardiac organoids to enhance tissue function and maturation. We first present extensive characterization of the synthesized AuNRs, their PEGylation and cytotoxicity evaluation. We then evaluated the functional contractility and transcriptomic profile of cardiac organoids fabricated with hiPSC-derived cardiomyocytes (mono-culture) as well as with hiPSC-derived cardiomyocytes and cardiac fibroblasts (co-culture). We demonstrated that PEGylated AuNRs are biocompatible and do not induce cell death in hiPSC-derived cardiac cells and organoids. We also found an improved transcriptomic profile of the co-cultured organoids indicating maturation of the hiPSC-derived cardiomyocytes in the presence of cardiac fibroblasts. Overall, we present for the first time the integration of AuNRs into cardiac organoids, showing promising results for improved tissue function.

Atypical Presentation of Adult-Onset Still's Disease.

Adult-onset Still's disease (AOSD) is a rare rheumatic disorder with various presentations. It is diagnosed based on the Yamaguchi criteria, besides the exclusion of infectious diseases and other rheumatic disorders and malignancies. Here, we describe a case of a young man, presenting with remittent fever, abdominal pain, and persistent nausea. Further evaluations showed elevated acute phase reactants, abnormal levels of liver transaminase, multiple lymphadenopathies, and pleural effusion. He was finally diagnosed with AOSD and responded well to corticosteroids and methotrexate. We describe the present case to alert gastroenterologists to AOSD as a rare differential diagnosis in patients with persistent gastrointestinal symptoms.

Serum Alkaline Phosphate Level Associates with Metabolic Syndrome Components Regardless of Non-Alcoholic Fatty Liver; A Population-Based Study in Northern Iran.

Background: Serum alkaline phosphatase (ALP) is an indicator of hepatobiliary disorders, such as metabolic syndrome (MetS). To assess the association between serum ALP levels and MetS, with or without non-alcoholic fatty liver disease (NAFLD), in a cohort study in northern Iran. Methods: Data from approximately 5257 subjects aged more than 18 years participating in the Amol cohort were used. We extracted the required data and investigated the correlation between liver enzyme levels and MetS. Multiple logistic regression analyses based on the serum ALP quartiles were performed. Results: Of them, 2860 were male with a mean age of 42.11±16.1 years. A positive linear trend was observed between serum ALP levels and the number of MetS components in both sexes. In both sexes, systolic blood pressure, waist circumferences, and high-density lipoprotein (HDL) had a significant association with ALP. After adjusting for age, both sexes with NAFLD showed an increased risk of developing MetS. The risk of NAFLD increased in individuals with>2nd quartile of ALP. Furthermore, higher ALP levels were associated with an increased risk of MetS in males (1.1014 [0.782-1.315]) and females (1.441 [1.085-1.913]). Conclusion: There is a significant association between serum ALP levels and MetS, independent of fatty liver changes, suggesting that this marker can be considered as a feasible predictor of MetS.

Development and Characterization of Isogenic Cardiac Organoids from Human-Induced Pluripotent Stem Cells Under Supplement Starvation Regimen.

The prevalence of cardiovascular risk factors is expected to increase the occurrence of cardiovascular diseases (CVDs) worldwide. Cardiac organoids are promising candidates for bridging the gap between in vitro experimentation and translational applications in drug development and cardiac repair due to their attractive features. Here we present the fabrication and characterization of isogenic scaffold-free cardiac organoids derived from human induced pluripotent stem cells (hiPSCs) formed under a supplement-deprivation regimen that allows for metabolic synchronization and maturation of hiPSC-derived cardiac cells. We propose the formation of coculture cardiac organoids that include hiPSC-derived cardiomyocytes and hiPSC-derived cardiac fibroblasts (hiPSC-CMs and hiPSC-CFs, respectively). The cardiac organoids were characterized through extensive morphological assessment, evaluation of cellular ultrastructures, and analysis of transcriptomic and electrophysiological profiles. The morphology and transcriptomic profile of the organoids were improved by coculture of hiPSC-CMs with hiPSC-CFs. Specifically, upregulation of Ca2+ handling-related genes, such as RYR2 and SERCA, and structure-related genes, such as TNNT2 and MYH6, was observed. Additionally, the electrophysiological characterization of the organoids under supplement deprivation shows a trend for reduced conduction velocity for coculture organoids. These studies help us gain a better understanding of the role of other isogenic cells such as hiPSC-CFs in the formation of mature cardiac organoids, along with the introduction of exogenous chemical cues, such as supplement starvation.

Cytochrome P2E1 (CYP2E1) Gene Polymorphism as a Potential Prognostic Biomarker in Colorectal Cancer.

BACKGROUND: Colon cancer is the most common type of gastrointestinal cancer. Genetic factors have been shown to have a role in the development of colorectal cancers. The aim of this study was to assess the expression of Cytochrome P2E1 (CYP2E1) gene polymorphism as a potential prognostic biomarker in the diagnosis, treatment, and prognosis evaluation of patients with colorectal cancer. METHODS: in this cross-sectional study, all of our 100 patients with colorectal cancer who underwent surgical operation were included. DNA was extracted from the tumor specimens to assess Cytochrome P2E1 (CYP2E1) Gene polymorphism by Conventional-PCR. RFLP-PCR method was used for RsaI polymorphism evaluation. Patients' characteristics were also recorded and their associations with CYP2E1 were assessed. RESULTS: One hundred tumor specimens were assessed. In total, 88 had wild-type, 8 had purely a 96 bp insertion in CYP2E1, and 4 were partially mutated by a single allele insertion. Generally, 10% of samples had positive results for the RsaI polymorphism. There were no statistically significant associations between CYP2E1 gene polymorphism and number of lymph nodes removed during the operation (P = 0.353), number of positive lymph nodes (P = 0.668), tumor specificity including mucinous or non-mucinous (P = 0.053), tumor invasion (P = 0.074), grading (P = 0.898), differentiation (P = 0.941), tumor location (P = 0.42) or staging (P = 0.182). CONCLUSION: There was no association between RsaI type CYP2E1 polymorphism and colorectal cancer risk. Our study does not support the use of this biomarker to evaluate the prognosis of colon cancer.