Machine-Learning-Assisted Selective Synthesis of a Semiconductive Silver Thiolate Coordination Polymer with Segregated Paths for Holes and Electrons.

Coordination polymers (CPs) with infinite metal-sulfur bond networks have unique electrical conductivities and optical properties. However, the development of new (-M-S-)n -structured CPs is hindered by difficulties with their crystallization. Herein, we describe the use of machine learning to optimize the synthesis of trithiocyanuric acid (H3 ttc)-based semiconductive CPs with infinite Ag-S bond networks, report three CP crystal structures, and reveal that isomer selectivity is mainly determined by proton concentration in the reaction medium. One of the CPs, [Ag2 Httc]n , features a 3D-extended infinite Ag-S bond network with 1D columns of stacked triazine rings, which, according to first-principle calculations, provide separate paths for holes and electrons. Time-resolved microwave conductivity experiments show that [Ag2 Httc]n is highly photoconductive (φΣµmax =1.6×10-4  cm2 V-1 s-1 ). Thus, our method promotes the discovery of novel CPs with selective topologies that are difficult to crystallize.

Lead-Free Solar Cells based on Tin Halide Perovskite Films with High Coverage and Improved Aggregation.

Two simple methods to improve tin halide perovskite film structure are introduced, aimed at increasing the power conversion efficiency of lead free perovskite solar cells. First, a hot antisolvent treatment (HAT) was found to increase the film coverage and prevent electrical shunting in the photovoltaic device. Second, it was discovered that annealing under a low partial pressure of dimethyl sulfoxide vapor increased the average crystallite size. The topographical and electrical qualities of the perovskite films are substantively improved as a result of the combined treatments, facilitating the fabrication of tin-based perovskite solar cell devices with power conversion efficiencies of over 7 %.

Lithium-Ion Endohedral Fullerene (Li+ @C60 ) Dopants in Stable Perovskite Solar Cells Induce Instant Doping and Anti-Oxidation.

Herein, we report use of [Li+ @C60 ]TFSI- as a dopant for spiro-MeOTAD in lead halide perovskite solar cells. This approach gave an air stability nearly 10-fold that of conventional devices using Li+ TFSI- . Such high stability is attributed to the hydrophobic nature of [Li+ @C60 ]TFSI- repelling moisture and absorbing intruding oxygen, thereby protecting the perovskite device from degradation. Furthermore, [Li+ @C60 ]TFSI- could oxidize spiro-MeOTAD without the need for oxygen. The encapsulated devices exhibited outstanding air stability for more than 1000 h while illuminated under ambient conditions.

Combined Charge Extraction by Linearly Increasing Voltage and Time-Resolved Microwave Conductivity to Reveal the Dynamic Charge Carrier Mobilities in Thin-Film Organic Solar Cells.

This article reports a purely experiment-based method to evaluate the time-dependent charge carrier mobilities in thin-film organic solar cells (OSCs) using simultaneous charge extraction by linearly increasing the voltage (CELIV) and time-resolved microwave conductivity (TRMC) measurements. This method enables the separate measurement of electron mobility (µe) and hole mobility (µh) in a metal-insulator-semiconductor (MIS) device. A slope-injection-restoration voltage profile for MIS-CELIV is also proposed to accurately determine the charge densities. The dynamic behavior of µe and µh is examined in five bulk heterojunction (BHJ) OSCs of polymer:fullerene (P3HT:PCBM and PffBT4T:PCBM) and polymer:nonfullerene acceptor (PM6:ITIC, PM6:IT4F, and PM6:Y6). While the former exhibits fast decays of µh and µe, the latter, in particular, PM6:IT4F and PM6:Y6, exhibits slow decays. Notably, the high-performing PM6:Y6 demonstrates both a balanced mobility (µe/µh) of 1.0-1.1 within 30 µs and relatively large CELIV-TRMC mobility values among the five BHJs. The results exhibit reasonable consistency with a high fill factor. The proposed new CELIV-TRMC technique offers a path toward a comprehensive understanding of dynamic mobility and its correlation with the OSC performance.

Exploration of Solution-Processed Bi/Sb Solar Cells by Automated Robotic Experiments Equipped with Microwave Conductivity.

Solution-processed inorganic solar cells with less toxic and earth-abundant elements are emerging as viable alternatives to high-performance lead-halide perovskite solar cells. However, the wide range of elements and process parameters impede the rapid exploration of vast chemical spaces. Here, we developed an automated robot-embedded measurement system that performs photoabsorption spectroscopy, optical microscopy, and white-light flash time-resolved microwave conductivity (TRMC). We tested 576 films of quaternary element-blended wide-bandgap Cs-Bi-Sb-I semiconductors with various compositions, organic salt additives (MACl, FACl, MAI, and FAI, where MA and FA represent methylammonium and formamidinium, respectively), and thermal annealing temperatures. Among them, we found that the maximum power conversion efficiency (PCE) was 2.36%, which is significantly higher than the PCE of 0.68% for a reference film without an additive. Machine learning (ML) and statistical analyses revealed significant features and their relationships with TRMC transients, thereby demonstrating the advantages of combining ML and automated experiments for the high-throughput exploration of photovoltaic materials.

Elucidation of a Photothermal Energy Conversion Mechanism in Hydrogenated Molybdenum Suboxide: Interplay of Trapped Charges and Their Dielectric Interactions.

Hydrogenated molybdenum suboxide (HxMoO3-y) is a promising photothermal energy conversion (PEC) material. However, its charge carrier dynamics and underlying mechanisms remain unclear. Utilizing flash-photolysis time-resolved microwave conductivity, we investigated charge carrier-dielectric interactions in the Pt/HxMoO3-y composite. The charge recombination of H2-reduced Pt/HxMoO3-y was 2-3 orders of magnitude faster than that of Pt/MoO3, indicating efficient PEC. A complex photoconductivity study revealed that Pt/HxMoO3-y has two types of trapping mechanisms, Drude-Zener (DZ) and negative permittivity effect (NPE) modes, depending on the reduction temperature. Pt/HxMoO3-y reduced at 100 °C exhibited a dominant NPE owing to the electrical interaction of trapped charges with the surrounding ions and/or OH base. This polaronic trapped state retarded the PEC process. We found Pt/HxMoO3-y reduced at 200 °C to be optimal owing to the balanced suppression of the NPE and charge diffusion. This is the first report revealing the charge dynamics in hydrogenated metal oxides and their impacts on PEC processes.

Surface Passivation of Lead Halide Perovskite Solar Cells by a Bifacial Donor-π-Donor Molecule.

Surface passivation is key to the power conversion efficiency (PCE) of organic-inorganic lead halide perovskite solar cells (PSCs). Herein, we report a novel molecular concept of a C2-symmetric syn-type bifacial donor-π-donor (D-π-D) passivation molecule (a racemic mixture of enantiomers) with hydrophobic phenyls and hydrophilic tetraethylene glycol-substituted phenyls on each face of the indeno-[1,2-b]fluorene π-core. In addition to this bifacial amphiphilic π-core unit, triphenylamine, a well-established passivation donor, effectively passivated the PSC surface, facilitated hole transfer, and increased the maximum PCE from 18.43 to 19.74%. Another notable effect is the removal of remnant PbI2 and the change in the perovskite orientation on the surface by the syn-type molecule. In contrast, the anti-type isomer degraded its long-term stability. We characterized the electrostatic and electronic properties of these molecules and highlighted the advantage of molecular strategy based on a bifacial structure and its stereochemistry.

Precise Control of the Molecular Arrangement of Organic Semiconductors for High Charge Carrier Mobility.

Organic semiconductors are well-known to exhibit high charge carrier mobility based on their spread of the π-orbital. In particular, the π-orbital overlap between neighboring molecules significantly affects their charge carrier mobility. This study elucidated the direct effect of subtle differences in the π-orbital overlap on charge carrier mobility, by precisely controlling only molecular arrangements without any chemical modifications. We synthesized disulfonic acid composed of a [1]benzothieno[3,2-b][1]benzothiophene (BTBT) moiety, and prepared organic salts with four butylamine isomers. Regardless of the type of butylamine combined, electronic states of the constituent BTBT derivative were identical, and all BTBT arrangements were edge-to-face herringbone-type. However, depending on the difference of steric hindrance, center-to-center distances and dihedral angles between neighboring BTBT moieties slightly varied. Despite a similar arrangement, the photoconductivity of four organic salts differed by a factor of approximately two. Additionally, theoretical charge carrier mobilities from their crystal structures exhibited a strong correlation with their photoconductivity.

Perovskite Solar Cell Using Isonicotinic Acid as a Gap-Filling Self-Assembled Monolayer with High Photovoltaic Performance and Light Stability.

High photovoltaic performance and light stability are required for the practical outdoor use of lead-halide perovskite solar cells. To improve the light stability of perovskite solar cells, it is effective to introduce a self-assembled monolayer (SAM) between the carrier transport layer and the perovskite layer. Several alternative approaches in their molecular design and combination with multiple SAMs support high photovoltaic conversion efficiency (PCE). Herein, we report a new structure for improving both PCE and light stability, in which the surface of an electron transport layer (ETL) was modified by combining a fullerene-functionalized self-assembled monolayer (C60SAM) and a suitable gap-filling self-assembled monolayer (GFSAM). Small-sized GFSAMs can enter the gap space of the C60SAM and terminate the unterminated sites on the ETL surface. The best GFSAM in this study was formed using an isonicotinic acid solution. After a light stability test for 68 h at 50 °C under 1 sun illumination, the best cell with C60SAM and GFSAM showed a PCE of 18.68% with a retention rate of over 99%. Moreover, following outdoor exposure for six months, the cells with C60SAM and GFSAM exhibited almost unchanged PCE. From the valence band spectra of the ETLs obtained using hard X-ray photoelectron spectroscopy, we confirmed a decrease in the offset at the ETL/perovskite interface owing to the additional GFSAM treatment on the C60SAM-modified ETL surface. Time-resolved microwave conductivity measurements demonstrated that the additional GFSAM improved electron extraction at the C60SAM-modified ETL/perovskite interface.

Self-Assembled Organic Cations-Assisted Band-Edge Tailoring in Bismuth-Based Perovskites for Enhanced Visible Light Absorption and Photoconductivity.

Bismuth-based zero-dimensional perovskites garner high research interest because of their advantages, such as excellent moisture stability and lower toxicity in comparison to lead-based congeners. However, the wide optical bandgap (>2 eV) and poor photoconductivity of these materials are the bottlenecks for their optoelectronic applications. Herein, we report a combined experimental and theoretical study of the structural features and optoelectronic properties of two novel and stable zero-dimensional bismuth perovskites: (biphenyl bis(methylammonium))1.5BiI6·2H2O (BPBI) and (naphthalene diimide bis(ethylammonium))1.5BiI6·2H2O (NDBI). NDBI features a remarkably narrower bandgap (1.82 eV) than BPBI (2.06 eV) because of the significant orbital contribution of self-assembled naphthalene diimide cations at the band edges of NDBI. Further, the FP-TRMC analysis revealed that the photoconductivity of NDBI is about 3.7-fold greater than that of BPBI. DFT calculations showed that the enhanced photoconductivity in NDBI arises from its type-IIa band alignment, whereas type-Ib alignment was seen in BPBI.

Mixed lead-tin perovskite films with >7 µs charge carrier lifetimes realized by maltol post-treatment.

Mixed lead-tin (Pb-Sn) halide perovskites with optimum band gaps near 1.3 eV are promising candidates for next-generation solar cells. However, the performance of solar cells fabricated with Pb-Sn perovskites is restricted by the facile oxidation of Sn(ii) to Sn(iv), which induces self-doping. Maltol, a naturally occurring flavor enhancer and strong metal binding agent, was found to effectively suppress Sn(iv) formation and passivate defects in mixed Pb-Sn perovskite films. When used in combination with Sn(iv) scavenging, the maltol surface treatment led to high-quality perovskite films which showed enhanced photoluminescence intensities and charge carrier lifetimes in excess of 7 µs. The scavenging and surface treatments resulted in highly reproducible solar cell devices, with photoconversion efficiencies of up to 21.4% under AM1.5G illumination.

How the Mixed Cations (Guanidium, Formamidinium, and Phenylethylamine) in Tin Iodide Perovskites Affect Their Charge Carrier Dynamics and Solar Cell Characteristics.

Despite recent interest in lead-free Sn iodide perovskite (ASnI3) solar cells, the role of mixed A-site cations is yet to be fully understood. Here, we report the effect of the ternary mixing of organic A-site cations (guanidium, GA; formamidinium, FA; and phenylethylamine, PEA) on the solar cell performance and charge carrier dynamics that are evaluated using time-resolved microwave conductivity (TRMC). (GAxFA1-x)0.9PEA0.1SnI3 exhibits the maximum power conversion efficiency (PCE) of 7.90% at x = 0.15 and a drastic decrease with increasing GA content. Notably, our TRMC measurements of ASnI3 with/without a hole transport layer reveal the same trend with the devices. From the analyses, we suggest that a variation of electron mobility affected by the location of the GA cation in the grains significantly impacts the PCE. Our work sheds light on the role of mixed A-site cations and directs a route toward the further development of Sn perovskite solar cells.

Anisotropic Photoconductivity and Long-Lived Charge Carriers in Bismuth-Based One-Dimensional Perovskite with Type-IIa Band Alignment.

Bismuth-based perovskites are attracting intense scientific interest due to low toxicity and excellent moisture stability compared to lead-based analogues. However, high exciton binding energy, poor charge carrier separation, and transport efficiencies lower their optoelectronic performances. To address these issues, we have integrated an electronically active organic cation, naphthalimide ethylammonium, between the [BiI52-]n chains via crystal engineering to form a novel perovskite-like material (naphthalimide ethylammonium)2BiI5 (NBI). Single crystal analysis revealed a one-dimensional quantum-well structure for NBI in which inter-inorganic well electronic coupling is screened by organic layers. It exhibited anisotropic photoconductivity and long-lived charge carriers with milliseconds lifetime, which is higher than that of CH3NH3PbI3. Density functional theory calculations confirmed type-IIa band alignment between organic cations and inorganic chains, allowing the former to electronically contribute to the overall charge transport properties of the material.

Solution-Processed Bi2S3 Photoresistor Film To Mitigate a Trade-off between Morphology and Electronic Properties.

Bismuth sulfide (Bi2S3) is an attractive 2D layered, visible-light-absorbing semiconductor composed of nontoxic, abundant elements. Improving the quality of a Bi2S3 film for device applications while maintaining its intrinsic electronic properties is a challenge, as conventional film fabrication processes require a trade-off due to the uncontrolled nucleation and growth steps. We report a novel procedure for Bi2S3 film formation involving spin-coating of a precursor solution of bismuth acetate and thiourea, followed by crystallization under diluted H2S gas. This two-step process produced a large-grained (<400 nm), smooth (surface roughness = 1.7 nm), and highly pure Bi2S3 film with a layer-stacked structure on a substrate. Most importantly, the film exhibited a moderate Hall effect electron mobility (∼7 cm2 V-1 s-1) and excellent performance as a photoresistor with improved photoconductance and on-off ratio compared with those prepared by conventional methods. Our approach provides a versatile route for the development of metal sulfide semiconductors for optoelectronic devices.

Thermoresponsive Emission Switching via Lower Critical Solution Temperature Behavior of Organic-Inorganic Perovskite Nanoparticles.

Lead halide perovskites have shown much promise for high-performing solar cells due to their inherent electronic nature, and though the color of bright-light emitters based on perovskite nanoparticles can be tuned by halide mixing and/or size control, dynamic switching using external stimuli remains a challenge. This article reports an unprecedented lower critical solution temperature (LCST) for toluene solutions containing methylammonium lead bromide (MAPbBr3 ), oleic acid, alkylamines, and dimethylformamide. The delicate interplay of these molecules and ions allows for the reversible formation and decomposition of MAPbBr3 nanoparticles upon heating and cooling, which is accompanied by green and blue photoemissions at each state. An intermediate 1D crystal with PbBr2 -amine coordination is found to play pivotal role in this, and a mechanistic insight is provided based on a three-state model. In addition to a high quantum yield (up to 85%), this system allows for control over the cloud point (30-80 °C) through compositional engineering and the luminescent color (blue to red) via halogen exchange, thus making it a versatile solution for developing functional molecular organic-inorganic LCST quantum dots.

Solvent-Coordinated Tin Halide Complexes as Purified Precursors for Tin-Based Perovskites.

A series of solvent-coordinated tin halide complexes were prepared as impurity-free precursors for tin halide perovskites, and their structures were determined by single-crystal X-ray diffraction analysis. Using these precursors, the tin halide perovskites, MASnI3 and FASnI3, were prepared, and their electronic structures and photophysical properties were examined under inert conditions by means of photoelectron yield spectroscopy as well as absorption and fluorescence spectroscopies. Their valence bands (MASnI3: -5.02 eV; FASnI3: -5.16 eV) are significantly higher than those of MAPbI3 or the typical hole-transporting materials 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamino)-9,9'-spirobifluorene and poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine). These results suggest that to develop the solar cells using these tin halide perovskites with efficient hole-collection properties, hole-transporting materials should be chosen that have the highest occupied molecular orbital levels higher than -5.0 eV.

High-Performance Long-Term-Stable Dopant-Free Perovskite Solar Cells and Additive-Free Organic Solar Cells by Employing Newly Designed Multirole π-Conjugated Polymers.

Perovskite solar cells (PSCs) and organic solar cells (OSCs) are promising renewable light-harvesting technologies with high performance, but the utilization of hazardous dopants and high boiling additives is harmful to all forms of life and the environment. Herein, new multirole π-conjugated polymers (P1-P3) are developed via a rational design approach through theoretical hindsight, further successfully subjecting them into dopant-free PSCs as hole-transporting materials and additive-free OSCs as photoactive donors, respectively. Especially, P3-based PSCs and OSCs not only show high power conversion efficiencies of 17.28% and 8.26%, but also display an excellent ambient stability up to 30 d (for PSCs only), owing to their inherent superior optoelectronic properties in their pristine form. Overall, the rational approach promises to support the development of environmentally and economically sustainable PSCs and OSCs.

Accomplishment of Multifunctional π-Conjugated Polymers by Regulating the Degree of Side-Chain Fluorination for Efficient Dopant-Free Ambient-Stable Perovskite Solar Cells and Organic Solar Cells.

We present an efficient approach to develop a series of multifunctional π-conjugated polymers (P1-P3) by controlling the degree of fluorination (0F, 2F, and 4F) on the side chain linked to the benzodithiophene unit of the π-conjugated polymer. The most promising changes were noticed in optical, electrochemical, and morphological properties upon varying the degree of fluorine atoms on the side chain. The properly aligned energy levels with respect to the perovskite and PCBM prompted us to use them in perovskite solar cells (PSCs) as hole-transporting materials (HTMs) and in bulk heterojunction organic solar cells (BHJ OSCs) as photoactive donors. Interestingly, P2 (2F) and P3 (4F) showed an enhanced power conversion efficiency (PCE) of 14.94%, 10.35% compared to P1 (0F) (9.80%) in dopant-free PSCs. Similarly, P2 (2F) and P3 (4F) also showed improved PCE of 7.93% and 7.43%, respectively, compared to P1 (0F) (PCE of 4.35%) in BHJ OSCs. The high photvoltaic performance of the P2 and P3 based photovotaic devices over P1 are well correlated with their energy level alignment, charge transporting, morphological and packing properties, and hole transfer yields. In addition, the P1-P3 based dopant-free PSCs and BHJ OSCs showed an excellent ambient stability up to 30 days without a significant drop in their initial performance.