Towards quantum telescopes: demonstration of a two-photon interferometer for precision astrometry.

Classical optical interferometry requires maintaining live, phase-stable links between telescope stations. This requirement greatly adds to the cost of extending to long baseline separations and limits on baselines will in turn limit the achievable angular resolution. Here we describe a novel type of two-photon interferometer for astrometry, which uses photons from two separate sky sources and does not require an optical link between stations. Such techniques may make large increases in interferometric baselines practical, even by orders of magnitude, with a corresponding improvement in astrometric precision benefiting numerous fields in astrophysics. We tested a benchtop analogue version of the two-source interferometer and unambiguously observe correlated behavior in detections of photon pairs from two thermal light sources, in agreement with theoretical predictions. This work opens new possibilities in future astronomical measurements.

Quantifying high-dimensional spatial entanglement with a single-photon-sensitive time-stamping camera.

High-dimensional entanglement is a promising resource for quantum technologies. Being able to certify it for any quantum state is essential. However, to date, experimental entanglement certification methods are imperfect and leave some loopholes open. Using a single-photon-sensitive time-stamping camera, we quantify high-dimensional spatial entanglement by collecting all output modes and without background subtraction, two critical steps on the route toward assumptions-free entanglement certification. We show position-momentum Einstein-Podolsky-Rosen (EPR) correlations and quantify the entanglement of formation of our source to be larger than 2.8 along both transverse spatial axes, indicating a dimension higher than 14. Our work overcomes important challenges in photonic entanglement quantification and paves the way toward the development of practical quantum information processing protocols based on high-dimensional entanglement.

High speed imaging of spectral-temporal correlations in Hong-Ou-Mandel interference.

In this work we demonstrate spectral-temporal correlation measurements of the Hong-Ou-Mandel (HOM) interference effect with the use of a spectrometer based on a photon-counting camera. This setup allows us to take, within seconds, spectral temporal correlation measurements on entangled photon sources with sub-nanometer spectral resolution and nanosecond timing resolution. Through post processing, we can observe the HOM behaviour for any number of spectral filters of any shape and width at any wavelength over the observable spectral range. Our setup also offers great versatility in that it is capable of operating at a wide spectral range from the visible to the near infrared and does not require a pulsed pump laser for timing purposes. This work offers the ability to gain large amounts of spectral and temporal information from a HOM interferometer quickly and efficiently and will be a very useful tool for many quantum technology applications and fundamental quantum optics research.

Counting of Hong-Ou-Mandel Bunched Optical Photons Using a Fast Pixel Camera.

The uses of a silicon-pixel camera with very good time resolution (∼nanosecond) for detecting multiple, bunched optical photons is explored. We present characteristics of the camera and describe experiments proving its counting capabilities. We use a spontaneous parametric down-conversion source to generate correlated photon pairs, and exploit the Hong-Ou-Mandel (HOM) interference effect in a fiber-coupled beam splitter to bunch the pair onto the same output fiber. It is shown that the time and spatial resolution of the camera enables independent detection of two photons emerging simultaneously from a single spatial mode.

Time-resolved ion imaging at free-electron lasers using TimepixCam.

The application of a novel fast optical-imaging camera, TimepixCam, to molecular photoionization experiments using the velocity-map imaging technique at a free-electron laser is described. TimepixCam is a 256 × 256 pixel CMOS camera that is able to detect and time-stamp ion hits with 20 ns timing resolution, thus making it possible to record ion momentum images for all fragment ions simultaneously and avoiding the need to gate the detector on a single fragment. This allows the recording of significantly more data within a given amount of beam time and is particularly useful for pump-probe experiments, where drifts, for example, in the timing and pulse energy of the free-electron laser, severely limit the comparability of pump-probe scans for different fragments taken consecutively. In principle, this also allows ion-ion covariance or coincidence techniques to be applied to determine angular correlations between fragments.

Fast sensors for time-of-flight imaging applications.

The development of sensors capable of detecting particles and radiation with both high time and high positional resolution is key to improving our understanding in many areas of science. Example applications of such sensors range from fundamental scattering studies of chemical reaction mechanisms through to imaging mass spectrometry of surfaces, neutron scattering studies aimed at probing the structure of materials, and time-resolved fluorescence measurements to elucidate the structure and function of biomolecules. In addition to improved throughput resulting from parallelisation of data collection - imaging of multiple different fragments in velocity-map imaging studies, for example - fast image sensors also offer a number of fundamentally new capabilities in areas such as coincidence detection. In this Perspective, we review recent developments in fast image sensor technology, provide examples of their implementation in a range of different experimental contexts, and discuss potential future developments and applications.

Exploring surface photoreaction dynamics using pixel imaging mass spectrometry (PImMS).

A new technique for studying surface photochemistry has been developed using an ion imaging time-of-flight mass spectrometer in conjunction with a fast camera capable of multimass imaging. This technique, called pixel imaging mass spectrometry (PImMS), has been applied to the study of butanone photooxidation on TiO2(110). In agreement with previous studies of this system, it was observed that the main photooxidation pathway for butanone involves ejection of an ethyl radical into vacuum which, as confirmed by our imaging experiment, undergoes fragmentation after ionization in the mass spectrometer. This proof-of-principle experiment illustrates the usefulness and applicability of PImMS technology to problems of interest within the surface science community.

Fluorescence Lifetime Macro Imager for Biomedical Applications.

This paper presents a new photoluminescence lifetime imager designed to map the molecular oxygen (O2) concentration in different phosphorescent samples ranging from solid-state, O2-sensitive coatings to live animal tissue samples stained with soluble O2-sensitive probes. In particular, the nanoparticle-based near-infrared probe NanO2-IR, which is excitable with a 625 nm light-emitting diode (LED) and emits at 760 nm, was used. The imaging system is based on the Timepix3 camera (Tpx3Cam) and the opto-mechanical adaptor, which also houses an image intensifier. O2 phosphorescence lifetime imaging microscopy (PLIM) is commonly required for various studies, but current platforms have limitations in their accuracy, general flexibility, and usability. The system presented here is a fast and highly sensitive imager, which is built on an integrated optical sensor and readout chip module, Tpx3Cam. It is shown to produce high-intensity phosphorescence signals and stable lifetime values from surface-stained intestinal tissue samples or intraluminally stained fragments of the large intestine and allows the detailed mapping of tissue O2 levels in about 20 s or less. Initial experiments on the imaging of hypoxia in grafted tumors in unconscious animals are also presented. We also describe how the imager can be re-configured for use with O2-sensitive materials based on Pt-porphyrin dyes using a 390 nm LED for the excitation and a bandpass 650 nm filter for emission. Overall, the PLIM imager was found to produce accurate quantitative measurements of lifetime values for the probes used and respective two-dimensional maps of the O2 concentration. It is also useful for the metabolic imaging of ex vivo tissue models and live animals.

Multimass velocity-map imaging with the Pixel Imaging Mass Spectrometry (PImMS) sensor: an ultra-fast event-triggered camera for particle imaging.

We present the first multimass velocity-map imaging data acquired using a new ultrafast camera designed for time-resolved particle imaging. The PImMS (Pixel Imaging Mass Spectrometry) sensor allows particle events to be imaged with time resolution as high as 25 ns over data acquisition times of more than 100 µs. In photofragment imaging studies, this allows velocity-map images to be acquired for multiple fragment masses on each time-of-flight cycle. We describe the sensor architecture and present bench-testing data and multimass velocity-map images for photofragments formed in the UV photolysis of two test molecules: Br(2) and N,N-dimethylformamide.

3D velocity map imaging of electrons with TPX3CAM.

We demonstrate three-dimensional velocity map imaging of low energy electrons using a TPX3CAM, where the three-dimensional momentum information [px, py, pz] is encoded in position and timing [x, y, t] of hits on the camera sensor. We make use of the camera sensor for the [x, y] information and a constant fraction discriminator and fast time to digital converter in the camera for the time information. We illustrate the capabilities of our apparatus by presenting above threshold ionization measurements of xenon, which produces well defined structures in the momentum resolved photoelectron yield.

A simple approach for characterizing the spatially varying sensitivity of microchannel plate detectors.

We present a simple approach to characterize the spatial variation of the gain in microchannel plate (MCP) coupled to phosphor detectors using single electron or photon hits. The technique is easy to implement and general enough to be extended to other kinds of detectors. We demonstrate the efficacy of the approach on both laboratory and Monte Carlo generated datasets. Furthermore, we use the approach to measure the variation in gain over time as the MCP is exposed to an increasing number of electrons.

Ion Microscope Imaging Mass Spectrometry Using a Timepix3-Based Optical Camera.

Ion microscopy allows for high-throughput mass spectrometry imaging. In order to resolve congested mass spectra, a high degree of timing precision is required from the microscope detector. In this paper we present an ion microscope mass spectrometer that uses a Timepix3 hybrid pixel readout with an optimal 1.56 ns resolution. A novel triggering technique is also employed to remove the need for an external time-to-digital converter (TDC) and allow the experiment to be performed using a low-cost and commercially available readout system. Results obtained from samples of rhodamine B demonstrate the application of multimass imaging sensors for microscope mass spectrometry imaging with high mass resolution.

Fast camera spatial characterization of photonic polarization entanglement.

Scalable technologies to characterize the performance of quantum devices are crucial to creating large quantum networks and quantum processing units. Chief among the resources of quantum information processing is entanglement. Here we describe the full temporal and spatial characterization of polarization-entangled photons produced by Spontaneous Parametric Down Conversions using an intensified high-speed optical camera, Tpx3Cam. This novel technique allows for precise determination of Bell inequality parameters with minimal technical overhead, and for new characterization methods for the spatial distribution of entangled quantum information. The fast-optical camera could lead to multiple applications in Quantum Information Science, opening new perspectives for the scalability of quantum experiments.

Developing a camera-based 3D momentum imaging system capable of 1 Mhits/s.

A camera-based three-dimensional (3D) imaging system with a superb time-of-flight (TOF) resolution and multi-hit capability was recently developed for electron/ion imaging [Lee et al. J. Chem. Phys. 141, 221101 (2014)]. In this work, we report further improvement of the event rate of the system by adopting an event-driven camera, Tpx3Cam, for detecting the 2D positions of electrons, while a high-speed digitizer provides highly accurate (∼30 ps) TOF information for each event at a rate approaching 1 Mhits/sec.

New luminescence lifetime macro-imager based on a Tpx3Cam optical camera.

The properties of a novel ultra-fast optical imager, Tpx3Cam, were investigated for macroscopic wide-field phosphorescent lifetime imaging (PLIM) applications. The camera is based on a novel optical sensor and Timepix3 readout chip with a time resolution of 1.6 ns, recording of photon arrival time and time over threshold for each pixel, and readout rate of 80 megapixels per second. In this study, we coupled the camera to an image intensifier, a 760 nm emission filter and a 50 mm lens, and with a super-bright 627nm LED providing pulsed excitation of a 18 × 18 mm sample area. The resulting macro-imager with compact and rigid optical alignment of its main components was characterised using planar phosphorescent O2 sensors and a resolution plate mask. Several acquisition and image processing algorithms were evaluated to optimise the system resolution and performance for the wide-field PLIM, followed by imaging a variety of phosphorescent samples. The new PLIM system looks promising, particularly for phosphorescence lifetime-based imaging of O2 in various chemical and biological samples.

Mapping O2 concentration in ex-vivo tissue samples on a fast PLIM macro-imager.

O2 PLIM microscopy was employed in various studies, however current platforms have limitations in sensitivity, image acquisition speed, accuracy and general usability. We describe a new PLIM imager based on the Timepix3 camera (Tpx3cam) and its application for imaging of O2 concentration in various tissue samples stained with a nanoparticle based probe, NanO2-IR. Upon passive staining of mouse brain, lung or intestinal tissue surface with minute quantities of NanO2-IR or by microinjecting the probe into the lumen of small or large intestine fragments, robust phosphorescence intensity and lifetime signals were produced, which allow mapping of O2 in the tissue within 20 s. Inhibition of tissue respiration or limitation of O2 diffusion to tissue produced the anticipated increases or decreases in O2 levels, respectively. The difference in O2 concentration between the colonic lumen and air-exposed serosal surface was around 140 µM. Furthermore, subcutaneous injection of 5 µg of the probe in intact organs (a paw or tail of sacrificed mice) enabled efficient O2 imaging at tissue depths of up to 0.5 mm. Overall, the PLIM imager holds promise for metabolic imaging studies with various ex vivo models of animal tissue, and also for use in live animals.

Photon counting phosphorescence lifetime imaging with TimepixCam.

TimepixCam is a novel fast optical imager based on an optimized silicon pixel sensor with a thin entrance window and read out by a Timepix Application Specific Integrated Circuit. The 256 × 256 pixel sensor has a time resolution of 15 ns at a sustained frame rate of 10 Hz. We used this sensor in combination with an image intensifier for wide-field time-correlated single photon counting imaging. We have characterised the photon detection capabilities of this detector system and employed it on a wide-field epifluorescence microscope to map phosphorescence decays of various iridium complexes with lifetimes of about 1 µs in 200 µm diameter polystyrene beads.

Coincidence velocity map imaging using Tpx3Cam, a time stamping optical camera with 1.5 ns timing resolution.

We demonstrate a coincidence velocity map imaging apparatus equipped with a novel time-stamping fast optical camera, Tpx3Cam, whose high sensitivity and nanosecond timing resolution allow for simultaneous position and time-of-flight detection. This single detector design is simple, flexible, and capable of highly differential measurements. We show detailed characterization of the camera and its application in strong field ionization experiments.

A new detector for mass spectrometry: direct detection of low energy ions using a multi-pixel photon counter.

A new type of ion detector for mass spectrometry and general detection of low energy ions is presented. The detector consists of a scintillator optically coupled to a single-photon avalanche photodiode (SPAD) array. A prototype sensor has been constructed from a LYSO (Lu(1.8)Y(0.2)SiO(5)(Ce)) scintillator crystal coupled to a commercial SPAD array detector. As proof of concept, the detector is used to record the time-of-flight mass spectra of butanone and carbon disulphide, and the dependence of detection sensitivity on the ion kinetic energy is characterised.