RESUMEN
Cyclic peptides are attracting attention as therapeutic agents due to their potential for oral absorption and easy access to tough intracellular targets. LUNA18, a clinical KRAS inhibitor, was transformed-without scaffold hopping-from the initial hit by using an mRNA display library that met our criteria for drug-likeness. In drug discovery using mRNA display libraries, hit compounds always possess a site linked to an mRNA tag. Here, we describe our examination of the Structure-Activity Relationship (SAR) using X-ray structures for chemical optimization near the site linked to the mRNA tag, equivalent to the C-terminus. Structural modifications near the C-terminus demonstrated a relatively wide range of tolerance for side chains. Furthermore, we show that a single atom modification is enough to change the pharmacokinetic (PK) profile. Since there are four positions where side chain modification is permissible in terms of activity, it is possible to flexibly adjust the pharmacokinetic profile by structurally optimizing the side chain. The side chain transformation findings demonstrated here may be generally applicable to hits obtained from mRNA display libraries.
Asunto(s)
Péptidos Cíclicos , Proteínas Proto-Oncogénicas p21(ras) , ARN Mensajero , Relación Estructura-Actividad , Péptidos Cíclicos/química , Péptidos Cíclicos/farmacología , Péptidos Cíclicos/síntesis química , Péptidos Cíclicos/farmacocinética , Humanos , ARN Mensajero/metabolismo , Proteínas Proto-Oncogénicas p21(ras)/antagonistas & inhibidores , Proteínas Proto-Oncogénicas p21(ras)/genética , Proteínas Proto-Oncogénicas p21(ras)/metabolismo , Estructura Molecular , Animales , Relación Dosis-Respuesta a DrogaRESUMEN
Structural and vibrational properties of aqueous solutions of alkali hydroxides (LiOH, NaOH, and KOH) are computed using quantum molecular dynamics simulations for solute concentrations ranging between 1 and 10M. Element-resolved partial radial distribution functions, neutron and x-ray structure factors, and angular distribution functions are computed for the three hydroxide solutions as a function of concentration. The vibrational spectra and frequency-dependent conductivity are computed from the Fourier transforms of velocity autocorrelation and current autocorrelation functions. Our results for the structure are validated with the available neutron data for 17M concentration of NaOH in water [Semrouni et al., Phys. Chem. Chem. Phys. 21, 6828 (2019)]. We found that the larger ionic radius [rLi+
RESUMEN
We have developed an extension of the Neural Network Quantum Molecular Dynamics (NNQMD) simulation method to incorporate electric-field dynamics based on Born effective charge (BEC), called NNQMD-BEC. We first validate NNQMD-BEC for the switching mechanisms of archetypal ferroelectric PbTiO3 bulk crystal and 180° domain walls (DWs). NNQMD-BEC simulations correctly describe the nucleation-and-growth mechanism during DW switching. In triaxially strained PbTiO3 with strain conditions commonly seen in many superlattice configurations, we find that flux-closure texture can be induced with application of an electric field perpendicular to the original polarization direction. Upon field reversal, the flux-closure texture switches via a pair of transient vortices as the intermediate state, indicating an energy-efficient switching pathway. Our NNQMD-BEC method provides a theoretical guidance to study electro-mechano effects with existing machine learning force fields using a simple BEC extension, which will be relevant for engineering applications such as field-controlled switching in mechanically strained ferroelectric devices.
RESUMEN
Cyclic peptides as a therapeutic modality are attracting a lot of attention due to their potential for oral absorption and accessibility to intracellular tough targets. Here, starting with a drug-like hit discovered using an mRNA display library, we describe a chemical optimization that led to the orally available clinical compound known as LUNA18, an 11-mer cyclic peptide inhibitor for the intracellular tough target RAS. The key findings are as follows: (i) two peptide side chains were identified that each increase RAS affinity over 10-fold; (ii) physico-chemical properties (PCP) including Clog P can be adjusted by side-chain modification to increase membrane permeability; (iii) restriction of cyclic peptide conformation works effectively to adjust PCP and improve bio-activity; (iv) cellular efficacy was observed in peptides with a permeability of around 0.4 × 10-6 cm/s or more in a Caco-2 permeability assay; and (v) while keeping the cyclic peptide's main-chain conformation, we found one example where the RAS protein structure was changed dramatically through induced-fit to our peptide side chain. This study demonstrates how the chemical optimization of bio-active peptides can be achieved without scaffold hopping, much like the processes for small molecule drug discovery that are guided by Lipinski's rule of five. Our approach provides a versatile new strategy for generating peptide drugs starting from drug-like hits.
Asunto(s)
Péptidos , Proteínas Proto-Oncogénicas p21(ras) , Humanos , Proteínas Proto-Oncogénicas p21(ras)/genética , Proteínas Proto-Oncogénicas p21(ras)/metabolismo , Células CACO-2 , Péptidos/farmacología , Péptidos/metabolismo , Péptidos Cíclicos/química , Conformación MolecularRESUMEN
Establishing a technological platform for creating clinical compounds inhibiting intracellular protein-protein interactions (PPIs) can open the door to many valuable drugs. Although small molecules and antibodies are mainstream modalities, they are not suitable for a target protein that lacks a deep cavity for a small molecule to bind or a protein found in intracellular space out of an antibody's reach. One possible approach to access these targets is to utilize so-called middle-size cyclic peptides (defined here as those with a molecular weight of 1000-2000 g/mol). In this study, we validated a new methodology to create oral drugs beyond the rule of 5 for intracellular tough targets by elucidating structural features and physicochemical properties for drug-like cyclic peptides and developing library technologies to afford highly N-alkylated cyclic peptide hits. We discovered a KRAS inhibitory clinical compound (LUNA18) as the first example of our platform technology.
Asunto(s)
Péptidos Cíclicos , Péptidos Cíclicos/químicaRESUMEN
The principle of least action is the cornerstone of classical mechanics, theory of relativity, quantum mechanics, and thermodynamics. Here, we describe how a neural network (NN) learns to find the trajectory for a Lennard-Jones (LJ) system that maintains balance in minimizing the Onsager-Machlup (OM) action and maintaining the energy conservation. The phase-space trajectory thus calculated is in excellent agreement with the corresponding results from the "ground-truth" molecular dynamics (MD) simulation. Furthermore, we show that the NN can easily find structural transformation pathways for LJ clusters, for example, the basin-hopping transformation of an LJ38 from an incomplete Mackay icosahedron to a truncated face-centered cubic octahedron. Unlike MD, the NN computes atomic trajectories over the entire temporal domain in one fell swoop, and the NN time step is a factor of 20 larger than the MD time step. The NN approach to OM action is quite general and can be adapted to model morphometrics in a variety of applications.
Asunto(s)
Simulación de Dinámica Molecular , Redes Neurales de la Computación , Fenómenos Biofísicos , TermodinámicaRESUMEN
The static dielectric constant ϵ_{0} and its temperature dependence for liquid water is investigated using neural network quantum molecular dynamics (NNQMD). We compute the exact dielectric constant in canonical ensemble from NNQMD trajectories using fluctuations in macroscopic polarization computed from maximally localized Wannier functions (MLWF). Two deep neural networks are constructed. The first, NNQMD, is trained on QMD configurations for liquid water under a variety of temperature and density conditions to learn potential energy surface and forces and then perform molecular dynamics simulations. The second network, NNMLWF, is trained to predict locations of MLWF of individual molecules using the atomic configurations from NNQMD. Training data for both the neural networks is produced using a highly accurate quantum-mechanical method, DFT-SCAN that yields an excellent description of liquid water. We produce 280×10^{6} configurations of water at 7 temperatures using NNQMD and predict MLWF centers using NNMLWF to compute the polarization fluctuations. The length of trajectories needed for a converged value of the dielectric constant at 0°C is found to be 20 ns (40×10^{6} configurations with 0.5 fs time step). The computed dielectric constants for 0, 15, 30, 45, 60, 75, and 90°C are in good agreement with experiments. Our scalable scheme to compute dielectric constants with quantum accuracy is also applicable to other polar molecular liquids.
RESUMEN
Despite the growing success of machine learning for predicting structure-property relationships in molecules and materials, such as predicting the dielectric properties of polymers, it is still in its infancy. We report on the effectiveness of solving structure-property relationships for a computer-generated database of dielectric polymers using recurrent neural network (RNN) models. The implementation of a series of optimization strategies was crucial to achieving high learning speeds and sufficient accuracy: (1) binary and nonbinary representations of SMILES (Simplified Molecular Input Line System) fingerprints and (2) backpropagation with affine transformation of the input sequence (ATransformedBP) and resilient backpropagation with initial weight update parameter optimizations (iRPROP- optimized). For the investigated database of polymers, the binary SMILES representation was found to be superior to the decimal representation with respect to the training and prediction performance. All developed and optimized Elman-type RNN algorithms outperformed nonoptimized RNN models in the efficient prediction of nonlinear structure-activity relationships. The average relative standard deviation (RSD) remained well below 5%, and the maximum RSD did not exceed 30%. Moreover, we provide a C++ codebase as a testbed for a new generation of open programming languages that target increasingly diverse computer architectures.
Asunto(s)
Redes Neurales de la Computación , Polímeros , Algoritmos , Bases de Datos Factuales , Aprendizaje AutomáticoRESUMEN
Reverse osmosis through a polyamide (PA) membrane is an important technique for water desalination and purification. In this study, molecular dynamics simulations were performed to study the biofouling mechanism (i.e., protein adsorption) and nonequilibrium steady-state water transfer of a cross-linked PA membrane. Our results demonstrated that the PA membrane surface's roughness is a key factor of surface's biofouling, as the lysozyme protein adsorbed on the surface's cavity site displays extremely low surface diffusivity, blocking water passage, and decreasing water flux. The adsorbed protein undergoes secondary structural changes, particularly in the pressure-driven flowing conditions, leading to strong protein-surface interactions. Our simulations were able to present water permeation close to the experimental conditions with a pressure difference as low as 5 MPa, while all the electrolytes, which are tightly surrounded by hydration water, were effectively rejected at the membrane surfaces. The analysis of the self-intermediate scattering function demonstrates that the dynamics of water molecules coordinated with hydrogen bonds is faster inside the pores than during the translation across the pores. The pressure difference applied shows a negligible effect on the water structure and content inside the membrane but facilitates the transportation of hydrogen-bonded water molecules through the membrane's sub-nanopores with a reduced coordination number. The linear relationship between the water flux and the pressure difference demonstrates the applicability of continuum hydrodynamic principles and thus the stability of the membrane structure.
RESUMEN
We fabricate a wearable blood leakage sensor on a cotton textile by combining two newly developed techniques. First, we employ a screen-offset printing technique that avoids blurring, short circuiting between adjacent conductive patterns, and electrode fracturing to form an interdigitated electrode structure for the sensor on a textile. Furthermore, we develop a scheme to distinguish blood from other substances by utilizing the specific dielectric dispersion of blood observed in the sub-megahertz frequency range. The sensor can detect blood volumes as low as 15 µL, which is significantly lower than those of commercially available products (which can detect approximately 1 mL of blood) and comparable to a recently reported value of approximately 10 µL. In this study, we merge two technologies to develop a more practical skin-friendly sensor that can be applied for safe, stress-free blood leakage monitoring during hemodialysis.
Asunto(s)
Dispositivos Electrónicos Vestibles , Electrodos , Impresión , TextilesRESUMEN
Hydrogen production from water using Al particles could provide a renewable energy cycle. However, its practical application is hampered by the low reaction rate and poor yield. Here, large quantum molecular dynamics simulations involving up to 16,611 atoms show that orders-of-magnitude faster reactions with higher yields can be achieved by alloying Al particles with Li. A key nanostructural design is identified as the abundance of neighboring Lewis acid-base pairs, where water-dissociation and hydrogen-production require very small activation energies. These reactions are facilitated by charge pathways across Al atoms that collectively act as a "superanion" and a surprising autocatalytic behavior of bridging Li-O-Al products. Furthermore, dissolution of Li atoms into water produces a corrosive basic solution that inhibits the formation of a reaction-stopping oxide layer on the particle surface, thereby increasing the yield. These atomistic mechanisms not only explain recent experimental findings but also predict the scalability of this hydrogen-on-demand technology at industrial scales.
RESUMEN
We introduce an extension of the divide-and-conquer (DC) algorithmic paradigm called divide-conquer-recombine (DCR) to perform large quantum molecular dynamics (QMD) simulations on massively parallel supercomputers, in which interatomic forces are computed quantum mechanically in the framework of density functional theory (DFT). In DCR, the DC phase constructs globally informed, overlapping local-domain solutions, which in the recombine phase are synthesized into a global solution encompassing large spatiotemporal scales. For the DC phase, we design a lean divide-and-conquer (LDC) DFT algorithm, which significantly reduces the prefactor of the O(N) computational cost for N electrons by applying a density-adaptive boundary condition at the peripheries of the DC domains. Our globally scalable and locally efficient solver is based on a hybrid real-reciprocal space approach that combines: (1) a highly scalable real-space multigrid to represent the global charge density; and (2) a numerically efficient plane-wave basis for local electronic wave functions and charge density within each domain. Hybrid space-band decomposition is used to implement the LDC-DFT algorithm on parallel computers. A benchmark test on an IBM Blue Gene/Q computer exhibits an isogranular parallel efficiency of 0.984 on 786 432 cores for a 50.3 × 10(6)-atom SiC system. As a test of production runs, LDC-DFT-based QMD simulation involving 16 661 atoms is performed on the Blue Gene/Q to study on-demand production of hydrogen gas from water using LiAl alloy particles. As an example of the recombine phase, LDC-DFT electronic structures are used as a basis set to describe global photoexcitation dynamics with nonadiabatic QMD (NAQMD) and kinetic Monte Carlo (KMC) methods. The NAQMD simulations are based on the linear response time-dependent density functional theory to describe electronic excited states and a surface-hopping approach to describe transitions between the excited states. A series of techniques are employed for efficiently calculating the long-range exact exchange correction and excited-state forces. The NAQMD trajectories are analyzed to extract the rates of various excitonic processes, which are then used in KMC simulation to study the dynamics of the global exciton flow network. This has allowed the study of large-scale photoexcitation dynamics in 6400-atom amorphous molecular solid, reaching the experimental time scales.
RESUMEN
Surface transfer doping is proposed to be a potential solution for doping diamond, which is hard to dope for applications in high-power electronics. While MoO3 is found to be an effective surface electron acceptor for hydrogen-terminated diamond with a negative electron affinity, the effects of commonly existing oxygen vacancies remain elusive. We have performed reactive molecular dynamics simulations to study the deposition of MoO3-x on a hydrogenated diamond (111) surface and used first-principles calculations based on density functional theory to investigate the electronic structures and charge transfer mechanisms. We find that MoO3-x is an effective surface electron acceptor and the spatial extent of doped holes in hydrogenated diamond is extended, promoting excellent transport properties. Charge transfer is found to monotonically decrease with the level of oxygen vacancy, providing guidance for engineering of the surface transfer doping process.
RESUMEN
Diffusion in solids is a slow process that dictates rate-limiting processes in key chemical reactions. Unlike crystalline solids that offer well-defined diffusion pathways, the lack of similar structural motifs in amorphous or glassy materials poses great challenges in bridging the slow diffusion process and material failures. To tackle this problem, we propose an AI-guided long-term atomistic simulation approach: molecular autonomous pathfinder (MAP) framework based on deep reinforcement learning (DRL), where the RL agent is trained to uncover energy efficient diffusion pathways. We employ a Deep Q-Network architecture with distributed prioritized replay buffer, enabling fully online agent training with accelerated experience sampling by an ensemble of asynchronous agents. After training, the agents provide atomistic configurations of diffusion pathways with their energy profile. We use a piecewise nudged elastic band to refine the energy profile of the obtained pathway and the corresponding diffusion time on the basis of transition-state theory. With the MAP framework, we demonstrate atomistic diffusion mechanisms in amorphous silica with time scales comparable to experiments.
RESUMEN
Cavitation bubbles occur in fluids subjected to rapid changes in pressure. We use billion-atom reactive molecular dynamics simulations on a 163,840-processor BlueGene/P supercomputer to investigate damage caused by shock-induced collapse of nanobubbles in water near an amorphous silica surface. Collapse of an empty bubble generates a high-speed nanojet, which causes pitting on the silica surface. We find pit radii are close to bubble radii, and experiments also indicate linear scaling between them. The gas-filled bubbles undergo partial collapse and, consequently, the damage on the silica surface is mitigated.
RESUMEN
OBJECTIVES: We clarify and demonstrate the utility of our new method of voice prosthesis insertion using puncture from the esophageal lumen. METHODS: Our new reverse puncture method using a flexible endoscope can be performed in an outpatient clinic under local anesthesia. We conducted a clinical trial with patients with head and neck cancer between April 2010 and February 2012. Our study focused on the following three points: 1) the percentage of patients for whom the procedure was successful; 2) the duration of the operation; and 3) any adverse effects. RESULTS: The puncture was performed successfully for 21 of 22 patients (95%). The mean duration of the operation, excluding the time for local anesthesia, was only 11.6 minutes. All patients began voice rehabilitation and attained peroral intake immediately after the operation. None of the patients suffered complications from the procedures. CONCLUSIONS: Most patients were treated with our new method with ease and at low risk. The high success rate and the absence of complications demonstrate the benefits of our method. We conclude that our method can be recommended for secondary reverse tracheoesophageal puncture.
Asunto(s)
Neoplasias de Cabeza y Cuello/cirugía , Laringe Artificial , Implantación de Prótesis/métodos , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Procedimientos Quirúrgicos Ambulatorios/métodos , Anestesia Local/métodos , Esófago/cirugía , Femenino , Humanos , Laringectomía , Masculino , Persona de Mediana Edad , Tempo Operativo , Tráquea/cirugía , Adulto JovenRESUMEN
Effects of lateral compression on out-of-plane deformation of two-dimensional MoSe2 layers are investigated. A MoSe2 monolayer develops periodic wrinkles under uniaxial compression and Miura-Ori patterns under biaxial compression. When a flat MoSe2 monolayer is placed on top of a wrinkled MoSe2 layer, the van der Waals (vdW) interaction transforms wrinkles into ridges and generates mixed 2H and 1T phases and chain-like defects. Under a biaxial strain, the vdW interaction induces regions of Miura-Ori patterns in bilayers. Strained systems analyzed using a convolutional neural network show that the compressed system consists of semiconducting 2H and metallic 1T phases. The energetics, mechanical response, defect structure, and dynamics are analyzed as bilayers undergo wrinkle-ridge transformations under uniaxial compression and moiré transformations under biaxial compression. Our results indicate that in-plane compression can induce self-assembly of out-of-plane metasurfaces with controllable semiconducting and metallic phases and moiré patterns with unique optoelectronic properties.
RESUMEN
The tumor resection ratio must be improved due the increased possibility of recurrence or malignancy. The purpose of this study was to develop a system that includes forceps with a continuous suction function and flow cytometry to diagnose the malignancy of the tumor for safe, accurate, and effective surgery. A newly developed continuous tumor resection forceps consists of a triple pipe structure, which enables continuous suction of the tumor by integrating the reflux water and suction system. The forceps includes tip opening/closure detection switch to control the adsorption and suction strength when tip is opened and closed. To perform accurate tumor diagnosis using flow cytometry, a filtering mechanism was developed for dehydrating reflux water from continuous suction forceps. In addition, a cell isolation mechanism comprising a roller pump and shear force loading mechanism was also newly developed. By using a triple pipe structure, a significantly larger tumor collection ratio was observed compared to the previous double-pipe structure. By performing suction pressure control with the opening/closure detection switch, inaccurate suction can be prevented. By widening the filter area of dehydration mechanism, it was possible to improve the reflux water dehydration ratio. The most appropriate filter area was 85 mm2. By using a newly developed cell isolation mechanism, the processing time can be reduced to less than 1/10 of the original time, keeping the same cell isolation ratio, when compared to the existing pipetting method. Neurosurgery assistance system with continuous tumor resection forceps and a cell separation, dehydration and isolation mechanism was developed. An effective and safe tumor resection, accurate and fast diagnosis of malignancy can be achieved by using the current system.
Asunto(s)
Neoplasias Encefálicas , Deshidratación , Humanos , Instrumentos Quirúrgicos , Succión , Neoplasias Encefálicas/diagnóstico , Neoplasias Encefálicas/cirugía , Separación CelularRESUMEN
Iodine oxides I2Oy (y = 4, 5, 6) crystallize into atypical structures that fall between molecular- and framework-base types and exhibit high reactivity in an ambient environment, a property highly desired in the so-called "agent defeat materials". Inelastic neutron scattering experiments were performed to determine the phonon density of states of the newly synthesized I2O5 and I2O6 samples. First-principles calculations were carried out for I2O4, I2O5, and I2O6 to predict their thermodynamic properties and phonon density of states. Comparison of the INS data with the Raman and infrared measurements as well as the first-principles calculations sheds light on their distinctive, anisotropic thermomechanical properties.
RESUMEN
Transferrin (Tf) endocytosis and recycling are essential for iron uptake and the regulation of cell proliferation. Tf and Tf receptor (TfR) complexes are internalized via clathrin-coated pits composed of a variety of proteins and lipids and pass through early endosomes to recycling endosomes. We investigated the role of sphingomyelin (SM) synthases (SMS1 and SMS2) in clathrin-dependent trafficking of Tf and cell proliferation. We employed SM-deficient lymphoma cells that lacked SMSs and that failed to proliferate in response to Tf. Transfection of SMS1, but not SMS2, enabled these cells to incorporate SM into the plasma membrane, restoring Tf-mediated proliferation. SM-deficient cells showed a significant reduction in clathrin-dependent Tf uptake compared with the parental SM-producing cells. Both SMS1 gene transfection and exogenous short-chain SM treatment increased clathrin-dependent Tf uptake in SM-deficient cells, with the Tf being subsequently sorted to Rab11-positive recycling endosomes. We observed trafficking of the internalized Tf to late/endolysosomal compartments, and this was not dependent on the clathrin pathway in SM-deficient cells. Thus, SMS1-mediated SM synthesis directs Tf-TfR to undergo clathrin-dependent endocytosis and recycling, promoting the proliferation of lymphoma cells.