Enhancing deep learning classification performance of tongue lesions in imbalanced data: mosaic-based soft labeling with curriculum learning.

BACKGROUND: Oral potentially malignant disorders (OPMDs) are associated with an increased risk of cancer of the oral cavity including the tongue. The early detection of oral cavity cancers and OPMDs is critical for reducing cancer-specific morbidity and mortality. Recently, there have been studies to apply the rapidly advancing technology of deep learning for diagnosing oral cavity cancer and OPMDs. However, several challenging issues such as class imbalance must be resolved to effectively train a deep learning model for medical imaging classification tasks. The aim of this study is to evaluate a new technique of artificial intelligence to improve the classification performance in an imbalanced tongue lesion dataset. METHODS: A total of 1,810 tongue images were used for the classification. The class-imbalanced dataset consisted of 372 instances of cancer, 141 instances of OPMDs, and 1,297 instances of noncancerous lesions. The EfficientNet model was used as the feature extraction model for classification. Mosaic data augmentation, soft labeling, and curriculum learning (CL) were employed to improve the classification performance of the convolutional neural network. RESULTS: Utilizing a mosaic-augmented dataset in conjunction with CL, the final model achieved an accuracy rate of 0.9444, surpassing conventional oversampling and weight balancing methods. The relative precision improvement rate for the minority class OPMD was 21.2%, while the relative [Formula: see text] score improvement rate of OPMD was 4.9%. CONCLUSIONS: The present study demonstrates that the integration of mosaic-based soft labeling and curriculum learning improves the classification performance of tongue lesions compared to previous methods, establishing a foundation for future research on effectively learning from imbalanced data.

Surgical management and final outcomes of chondrosarcoma of the temporomandibular joint: case series and comprehensive literature review.

BACKGROUND: Surgical management for chondrosarcoma of the temporomandibular joint (TMJ) is challenging due to the anatomical location involving the facial nerve and the functional joint. The purpose of this case series was to analyze the largest number of TMJ chondrosarcoma cases reported from a single institution and to review the literature about chondrosarcoma involving the TMJ. METHODS: Ten TMJ chondrosarcoma patients at Seoul National University Dental Hospital were included in this study. Radiographic features, surgical approaches, histopathologic subtypes, and treatment modalities were evaluated. All case reports of TMJ chondrosarcoma published in English from 1954 to 2021 were collected under PRISMA guidelines and comprehensively reviewed. RESULTS: The lesions were surgically resected in all 10 patients with efforts to preserve facial nerve function. Wide excision including margins of normal tissue was performed to ensure adequate resection margins. All TMJs were reconstructed with a metal condyle except one, which was reconstructed with vascularized costal bone. At last follow-up, all patients were still alive, and there had been no recurrence. Among 47 cases (patients from the literature and our cases), recurrence was specified in 43 and occurred in four (9.5%). CONCLUSIONS: For surgical management of TMJ chondrosarcoma, wide excision must consider preservation of the facial nerve. Reconstruction using a metal condyle prosthesis and a vascularized free flap is reliable. A more conservative surgical approach correlates with a favorable prognosis for facial nerve recovery. Nevertheless, wide excision is imperative to prevent tumor recurrence. In cases in which the glenoid fossa is unaffected by the tumor, it is deemed unnecessary to reconstruct the glenoid fossa within an oncological setting.

Craniofacial Epidermoid and Dermoid Cysts.

BACKGROUND: Epidermoid and dermoid cysts are benign developmental anomalies that can form anywhere in the body. Despite the rarity of incidence in the head and neck, they can arise at a variety of craniofacial locations. The purpose of this study was to analyze the clinical features of epidermoid and dermoid cysts arising in the craniofacial region with a literature review. METHODS: A retrospective study was designed, and clinical features and surgical considerations were investigated from a literature review. Cases of epidermoid cysts in the scalp, temporal area, glabellar area, mouth floor, and buccal mucosa were described. RESULTS: Dermoid cysts in more lateral regions of the scalp are rarely associated with intracranial extension. Because temporal dermoid cysts have a high rate of intracranial extension, radiological evaluation of the lesions in the temporal area is imperative. Epidermoid cysts in the glabellar area are usually superficial. Consideration of the surgical approach for an epidermoid cyst of the mouth floor is important. Because epidermoid cysts in the buccal mucosa are extremely rare, differential diagnosis was emphasized. Epidermoid cysts in the scalp, in the temporal intradiploic area, on the glabellar area in the periorbital region, in the mouth floor, and in the buccal mucosa were surgically excised considering the depth and location. Ten cases of epidermoid cysts in the buccal mucosa were retrieved from the literature review. CONCLUSIONS: Consideration of the anatomic locations of epidermoid and dermoid cysts in the craniofacial region might help facilitate accurate diagnosis and treatment.

Primary intraosseous carcinoma in the pediatric and adolescent mandible.

BACKGROUND: Primary intraosseous carcinoma (PIOC) is a rare malignant odontogenic tumor that predominantly occurs in males older than 50 years. PIOC can be misdiagnosed as odontogenic cyst because it occasionally shows a well-defined border on radiography. In this study, related literatures of pediatric and adolescent PIOC cases were analyzed under strict PRISMA guidelines along with an adolescent case who was provisionally misdiagnosed as an odontogenic cyst. METHODS: All case reports for PIOC published in English from 1966 to 2021 were collected. Cases under the age of 20 were classified as pediatric and adolescent populations in this study. A total of 12 pediatric and adolescent cases including 11 PIOCs from the literature and one new case of a 14-year-old female were analyzed. Clinical and radiographic features, diagnosis and treatment approaches, and prognosis were investigated. RESULTS: Ages ranged from 4 to 18 years. The female to male ratio was 1.4:1. Seven cases occurred in the mandible. Swelling was observed in 11 patients. The radiologic borders were well-defined in six cases and corticated in four cases. Tooth displacement and root resorption were observed in four and six cases, respectively. The provisional diagnosis for seven patients was odontogenic cyst and enucleation was performed in six cases including the new case. During the follow-up period, local recurrence occurred in three patients. The pediatric and adolescent PIOC cases with local recurrence showed poor prognosis. The locally recurred lesion in the new case did not decrease in size despite concurrent chemo-radiation therapy. CONCLUSIONS: Three-dimensional imaging modalities and incisional biopsy with multiple specimens are necessary to rule out PIOC in the lesions with atypical radiographic findings. PIOC should be diagnosed differentially from odontogenic cyst even in pediatric and adolescent populations to properly manage the disease with poor prognosis.

Virtually-Planned Orthognathic Surgery Achieves an Accurate Condylar Position.

PURPOSE: Accuracy in orthognathic surgery with virtual planning has been reported, but detailed analysis of accuracy according to anatomic location, including the mandibular condyle, is insufficient. The purpose of this study was to compare the virtual plan and surgical outcomes and analyze the degree and distribution of errors according to each anatomic location. PATIENTS AND METHODS: This retrospective cohort study evaluated skeletal class III patients, treated with bimaxillary surgery. The primary predictor was anatomic locations that consisted of right and left condyles, maxilla, and the distal segment of the mandible. Other variables were age and gender. The primary outcome was surgical accuracy, defined as mean 3-dimensional distance error, mean absolute error, and mean error along the horizontal, vertical, and anteroposterior axes between the virtual plan and surgical outcomes. Landmarks were compared using a computational method based on affine transformation with a 1-time landmark setting. The mean errors were visualized with multidimensional scattergrams. Bivariate and regression statistics were computed. RESULTS: This study included 52 patients, 26 men and 26 women, with a mean age of 21 years and 3 months. The mean 3D distance errors for condylar landmarks, maxillary landmarks, and landmarks on the distal segment of the mandible were 1.03, 1.25, and 2.24 mm, respectively. Condylar landmarks, maxillary landmarks, and the landmarks on the distal segment of the mandible were positioned at 0.49 mm inferior, 0.28 mm anterior, and 1.25 mm inferior, respectively. The landmark errors for the distal segment of the mandible exhibited a wider distribution than those for condylar and maxillary landmarks. CONCLUSIONS: Agreement between the planned and actual outcome aided by virtual surgical planning was highest for the condyles, followed by the maxilla, and the distal segment of the mandible. It is important to consider the tendency for surgical errors in each anatomic location during operations.

Effect of maxillary impaction on mandibular surgical accuracy in virtually-planned orthognathic surgery: A retrospective study.

Although surgical accuracy has been evaluated in bi-maxillary procedures, few studies have investigated the relationship between maxillary and mandibular accuracy. The present study evaluated the effect of maxillary impaction accuracy on mandibular surgical outcome. This cohort study analyzed skeletal class III patients who underwent planned maxillary impaction in bi-maxillary surgery. The primary predictor was the difference between the virtual plan and surgical outcome in the maxilla, as determined by three-dimensional (3D) and vertical differences. The secondary predictors were the planned 3D distances in the maxilla and mandible. The primary outcome was mandibular surgical accuracy, defined as the difference between the planned and actual outcomes, calculated as 3D Euclidean distance. The study included 73 patients. Increased differences between the planned and actual outcomes in the maxilla were associated with increased differences in the mandible. The post-operative position of the mandible was closer to the planned position when the position of the impacted maxilla was superior than when it was inferior to the planned position. Moving the maxilla closer to the planned position resulted in a more accurate mandibular position. These findings suggest that careful surgical procedures are needed to avoid inferior positioning of the maxilla during maxillary impaction surgery.

Surgical ciliated cyst of the mandible after orthognathic surgery: a case report with review of the literature.

BACKGROUND: Surgical ciliated cysts, also known as postoperative maxillary cysts or implantation cysts, occur mainly in the posterior maxilla after radical maxillary sinus surgery; they rarely develop in the mandible. They are thought to occur when the sinonasal epithelium is infiltrated by a surgical instrument during surgery or as a result of transplantation of bone or cartilage with respiratory epithelium attached. CASE PRESENTATION: We report a case in which a surgical ciliated cyst developed in the anterior part of the mandible, presumably as a result of bimaxillary orthognathic surgery and genioplasty performed 24 years earlier. We then review the few similar cases reported in the literature. CONCLUSION: Surgical ciliated cysts in the mandible are extremely rare, but they could occur after simultaneous surgery on the maxilla and mandible, even decades later. To prevent surgical ciliated cysts in the mandible, we recommend that the surgical instruments, especially the saw blade used during bimaxillary surgery, be new or cleaned and that previously placed plates and screws be removed at an appropriate time.

Treatment outcomes and prognostic factors in oral tongue cancer: a 20-year retrospective study at the National Cancer Center, South Korea.

Objectives: This study aimed to analyze the treatment outcomes and to evaluate the clinicopathological prognostic factors of oral tongue cancer. Patients and. Methods: We retrospectively analyzed treatment results and prognostic factors in 205 patients with oral tongue squamous cell carcinoma who were admitted to the National Cancer Center, South Korea, between January 2001 and December 2020. The patients were treated with surgery and postoperative, definitive radiotherapy (RT) or chemoradiotherapy (CRT). Results: Eighteen patients (8.8%) were treated with curative RT or CRT, while the rest (91.2%) were treated with surgery with or without postoperative RT or CRT. The median follow-up period was 30 months (range, 0-234 months). The 5-year overall survival (OS) and 5-year disease-free survival (DFS) were 72% and 63%, respectively. Multivariate analysis revealed that a positive neck nodal status (N1, N2-3) was significantly associated with poorer 5-year OS and DFS, while perineural invasion was associated with poorer 5-year DFS. Conclusion: Cervical metastasis and perineural invasion are significant prognostic predictors, and combination treatments are necessary for improving OS and DFS in patients with these factors.

Effect of implant drill characteristics on heat generation in osteotomy sites: a pilot study.

OBJECTIVES: The objective of this study was to evaluate the effect of drill-bone contact area on bone temperature during osteotomy preparation. MATERIAL AND METHODS: Conventional triflute Ø3.6 mm drills were modified with the intent to reduce frictional heat induction. The peripheral dimensions of the drill were reduced 0.15, 0.35 and 0.5 mm to evaluate the effect of surface area on induction of frictional heat between the drill and bone/cutting debris (parameter A). Also, the lateral cutting surface of the drill was set to 0.1, 2 and 7.5 mm to estimate heat induced by direct function of the drill (parameter B). A non-modified triflute drill (parameter A: 0 mm; parameter B: 15 mm) served as control. Thus, nine drills with different A/B combinations vs. one control were tested in artificial bone. Real-time temperature changes (during drilling and withdrawing) were assessed using an infrared thermal imager. Each drilling procedure was performed up to 20 times. Thermal image data were transferred to a PC for simultaneous analysis. RESULTS: Mean temperature changes for all modified drill combinations were smaller than for the control (P<0.001). The effects of parameters A and B were statistically significant (P<0.001). There was a significant interaction effect between the two parameters (P<0.001) showing that the effect of parameter A on the mean temperature changes is different depending on the values of parameter B. As the dimensions of parameter B decreased, the temperature change during drilling also decreased. However, a tendency for the temperature to increase or decrease by parameter A was not observed. CONCLUSIONS: Within the limitations of this pilot study, the observations herein suggest that reduction in contact area between the drill and bone reduces heat induction. Further studies to optimize drill/bone contact dimensions are needed.

Relationship between Eating and Digestive Symptoms and Respiratory Function in Advanced Duchenne Muscular Dystrophy Patients.

BACKGROUND: Duchenne muscular dystrophy (DMD) patients can have various issues that affect their quality of life, including eating and digestive conditions. OBJECTIVE: We sought to identify the relationship between respiratory function and various eating and digestion related symptoms in patients with advanced Duchenne muscular dystrophy (DMD). METHODS: Eating and digestive symptoms, including loss of appetite, nausea, vomiting, diarrhea, constipation, swallowing difficulty, mastication difficulty, early satiety, and aspiration, were evaluated among patients with advanced DMD who were nonambulatory and required noninvasive mechanical ventilatory support. In addition, various respiratory function parameters were measured, including forced vital capacity (FVC), maximal insufflation capacity (MIC), peak cough flow (PCF), assisted PCF (APCF), maximal inspiratory pressure (MIP), and maximal expiratory pressure (MEP). We then analyzed the relationship between gastrointestinal symptoms and respiratory function parameters. RESULTS: A total of 180 patients (age, 22.3±5.0 years) were included in the analysis. Loss of appetite and early satiety showed no correlation with any of the respiratory function parameters. Constipation was correlated with MEP; swallowing difficulty was correlated with MIC, APCF, MIP and MEP; and mastication difficulty was correlated with FVC, PCF, APCF, MIP, and MEP. Notably, age did not correlate with any gastrointestinal symptoms. CONCLUSIONS: Eating and digestive symptoms are more closely correlated with respiratory function than with age in patients with DMD. We think this correlation is mainly caused by the skeletal muscle strength, which is major determinant of both digestive and respiratory function.

Implant Drill Characteristics: Thermal and Mechanical Effects of Two-, Three-, and Four-Fluted Drills.

PURPOSE: Avoiding excessive trauma--thermal or otherwise--during dental implant site preparation is considered critical to implant success; overheating is considered to be a major cause of bone necrosis. Studies evaluating thermal and mechanical effects of implant drill design are limited, and effects of flute design have not been accounted for. The purpose of this study was to compare heat generation and cutting efficiency associated with two-, three-, and four-fluted implant drills to investigate the optimal number of flutes. MATERIALS AND METHODS: Two-, three-, and four-fluted dental implant drills with identical point, relief, and rake angles and otherwise standard dimensions were evaluated. Real-time temperature changes while drilling artificial bone were recorded using an infrared thermal imager. Cutting efficiency was assessed as the drilling time to a 15-mm depth under constant load using a specially designed recording system. Each drill variation was examined 20 times. A one-way analysis of variance was used for statistical analysis. RESULTS: Mean temperature increases amounted to 8.3°C, 10.8°C, and 15.1°C for two-, three-, and four-fluted drills, respectively; temperatures significantly increased (P < .001) with an increased number of flutes. Mean drilling time serving as a measure of cutting efficiency amounted to 2.6, 2.5, and 2.5 seconds for the two-, three-, and four-fluted drills, respectively. A trend of cutting efficiency increasing or decreasing according to the number of flutes was not observed. Differences in cutting efficiency among the three drill variations were statistically significant (P = .015). The cutting efficiency of the three-fluted drill was superior to that of the two-fluted drill (P = .016). CONCLUSION: Within the limitations of the study, a two-fluted drill would be preferred for osteotomy preparation due to its level of heat generation, whereas a three-fluted drill showed favorable cutting efficiency.

A preliminary study for determination of three-dimensional root apex position of the maxillary teeth using camera calibration technology.

OBJECTIVES: To propose a novel method for determining the three-dimensional (3D) root apex position of maxillary teeth using a two-dimensional (2D) panoramic radiograph image and a 3D virtual maxillary cast model. METHODS: The subjects were 10 adult orthodontic patients treated with non-extraction. The multiple camera matrices were used to define transformative relationships between tooth images of the 2D panoramic radiographs and the 3D virtual maxillary cast models. After construction of the root apex-specific projective (RASP) models, overdetermined equations were used to calculate the 3D root apex position with a direct linear transformation algorithm and the known 2D co-ordinates of the root apex in the panoramic radiograph. For verification of the estimated 3D root apex position, the RASP and 3D-CT models were superimposed using a best-fit method. Then, the values of estimation error (EE; mean, standard deviation, minimum error and maximum error) between the two models were calculated. RESULTS: The intraclass correlation coefficient values exhibited good reliability for the landmark identification. The mean EE of all root apices of maxillary teeth was 1.88 mm. The EE values, in descending order, were as follows: canine, 2.30 mm; first premolar, 1.93 mm; second premolar, 1.91 mm; first molar, 1.83 mm; second molar, 1.82 mm; lateral incisor, 1.80 mm; and central incisor, 1.53 mm. CONCLUSIONS: Camera calibration technology allows reliable determination of the 3D root apex position of maxillary teeth without the need for 3D-CT scan or tooth templates.