Evidence for Spin-Triplet Electron Pairing in the Proximity-Induced Superconducting State of an Fe-Doped InAs Semiconductor.

We provide evidence for spin-triplet electron pairing in proximity-induced superconductivity in a ferromagnetic semiconductor (In,Fe)As. As discovered in half-metallic materials, an extraordinarily long proximity range is observed. More surprising is a very strong concentration of supercurrent to the edges of the superconducting region, which is deduced from the extremely persistent oscillation of the critical current vs magnetic field. The maxima of the critical current appear not at the zero magnetic flux but at around the maximum magnetic disorder, reflecting the connectivity between the spin-triplet and singlet pairings. These spin-triplet natures in proximity superconductivity also reveal ferromagnetic properties of (In,Fe)As.

Electromotive force and huge magnetoresistance in magnetic tunnel junctions.

The electromotive force (e.m.f.) predicted by Faraday's law reflects the forces acting on the charge, -e, of an electron moving through a device or circuit, and is proportional to the time derivative of the magnetic field. This conventional e.m.f. is usually absent for stationary circuits and static magnetic fields. There are also forces that act on the spin of an electron; it has been recently predicted that, for circuits that are in part composed of ferromagnetic materials, there arises an e.m.f. of spin origin even for a static magnetic field. This e.m.f. can be attributed to a time-varying magnetization of the host material, such as the motion of magnetic domains in a static magnetic field, and reflects the conversion of magnetic to electrical energy. Here we show that such an e.m.f. can indeed be induced by a static magnetic field in magnetic tunnel junctions containing zinc-blende-structured MnAs quantum nanomagnets. The observed e.m.f. operates on a timescale of approximately 10(2)-10(3) seconds and results from the conversion of the magnetic energy of the superparamagnetic MnAs nanomagnets into electrical energy when these magnets undergo magnetic quantum tunnelling. As a consequence, a huge magnetoresistance of up to 100,000 per cent is observed for certain bias voltages. Our results strongly support the contention that, in magnetic nanostructures, Faraday's law of induction must be generalized to account for forces of purely spin origin. The huge magnetoresistance and e.m.f. may find potential applications in high sensitivity magnetic sensors, as well as in new active devices such as 'spin batteries'.

Field-Free Spin-Orbit Torque Magnetization Switching in a Perpendicularly Magnetized Semiconductor (Ga,Mn)As Single Layer.

Current-induced spin-orbit torque (SOT) in a perpendicularly magnetized single layer has a strong potential to switch the magnetization using an extremely low current density, which is generally 2-3 orders of magnitude smaller than that required for conventional metal bilayer systems. However, an in-plane external magnetic field has to be applied to break the symmetry and achieve deterministic switching. To further enhance the high-density integration and accelerate the practical application of highly efficient SOT magnetic random-access memory (SOT-MRAM) devices, field-free SOT magnetization switching in a ferromagnetic single layer is strongly needed. In a spin-orbit ferromagnet (a ferromagnet with strong spin-orbit interaction) with crystal inversion asymmetry and a multi-domain structure, the internal Dzyaloshinskii-Moriya effective fields are considered to induce field-free switching. Here, combined with strong spin-orbit coupling and a tilted anisotropy axis induced by a nonuniform Mn distribution and a possible magnetocrystalline anisotropy resulting from a slight substrate tilting, we successfully achieve magnetization switching in a spin-orbit ferromagnet (Ga,Mn)As single layer by utilizing SOT without applying any external magnetic field. Our findings help to deeply elucidate the SOT switching mechanism and can advance the development of a highly efficient MRAM with better scalability.

Magnetic field observation in a magnetic tunnel junction by scanning transmission electron microscopy.

A magnetic tunnel junction (MTJ) consists of two ferromagnetic layers separated by a thin insulating layer. MTJs show tunnel magnetoresistance effect, where the resistance in the direction perpendicular to the insulator layer drastically changes depending on the magnetization directions (parallel or antiparallel) in the ferromagnetic layers. However, direct observation of local magnetizations inside MTJs has been challenging. In this study, we demonstrate direct observation of magnetic flux density distribution inside epitaxially grown Fe/MgO/Fe layers using differential phase contrast scanning transmission electron microscopy. By utilizing newly developed tilt-scan averaging system for suppressing diffraction contrasts, we clearly visualize parallel and antiparallel states of ferromagnetic layers at nanometer resolution.

Colossal Magnetoresistive Switching Induced by d0 Ferromagnetism of MgO in a Semiconductor Nanochannel Device with Ferromagnetic Fe/MgO Electrodes.

Exploring potential spintronic functionalities in resistive switching (RS) devices is of great interest for creating new applications, such as multifunctional resistive random-access memory and novel neuromorphic computing devices. In particular, the importance of the spin-triplet state of cation vacancies in oxide materials, which is induced by localized and strong O-2p on-site Coulomb interactions, in RS devices has been overlooked. d0 ferromagnetism sometimes appears due to the spin-triplet state and ferromagnetic Zener's double exchange interactions between cation vacancies, which are occasionally strong enough to make nonmagnetic oxides ferromagnetic. Here, for the first time, anomalous and colossal magneto-RS (CMRS) with very high magnetic field dependence is demonstrated by utilizing an unconventional RS device composed of a Ge nanochannel with all-epitaxial single-crystalline Fe/MgO electrodes. The device shows colossal and unusual behavior as the threshold voltage and ON/OFF ratio strongly depend on a magnetic field, which is controllable with an applied voltage. This new phenomenon is attributed to the formation of d0-ferromagnetic filaments by attractive Mg vacancies due to the spin-triplet states with ferromagnetic double exchange interactions and the ferromagnetic proximity effect of Fe on MgO. The findings will allow the development of energy-efficient CMRS devices with multifield susceptibility.

Electric Field Control of Spin-Orbit Torque Magnetization Switching in a Spin-Orbit Ferromagnet Single Layer.

To achieve a desirable magnitude of spin-orbit torque (SOT) for magnetization switching and realize multifunctional spin logic and memory devices utilizing SOT, controlling the SOT manipulation is vitally important. In conventional SOT bilayer systems, researchers have tried to control the magnetization switching behavior via interfacial oxidization, modulation of spin-orbit effective field, and effective spin Hall angle; however, the switching efficiency is limited by the interface quality. A current-induced effective magnetic field in a single layer of a ferromagnet with strong spin-orbit interactions, the so-called spin-orbit ferromagnet, can be utilized to induce SOT. In spin-orbit ferromagnet systems, electric field application has the potential for manipulating the spin-orbit interactions via carrier concentration modulation. In this work, it is demonstrated that SOT magnetization switching can be successfully controlled via an external electric field using a (Ga, Mn)As single layer. By applying a gate voltage, the switching current density can be solidly and reversibly manipulated with a large ratio of 14.5%, which is ascribed to the successful modulation of the interfacial electric field. The findings of this work help further the understanding of the magnetization switching mechanism and advance the development of gate-controlled SOT devices.

Giant Spin-Valve Effect in Planar Spin Devices Using an Artificially Implemented Nanolength Mott-Insulator Region.

Developing technology to realize oxide-based nanoscale planar integrated circuits is in high demand for next-generation multifunctional electronics. Oxide circuits can have a variety of unique functions, including ferromagnetism, ferroelectricity, multiferroicity, superconductivity, and mechanical flexibility. In particular, for spin-transistor applications, the wide tunability of the physical properties due to the presence of multiple oxide phases is valuable for precise conductivity matching between the channel and ferromagnetic electrodes. This feature is essential for realistic spin-transistor operations. Here, a substantially large magnetoresistance (MR) ratio of up to ≈140% is demonstrated for planar-type (La,Sr)MnO3 (LSMO)-based spin-valve devices. This MR ratio is 10-100 times larger than the best values obtained for semiconductor-based planar devices, which have been studied over the past three decades. This structure is prepared by implementing an artificial nanolength Mott-insulator barrier region using the phase transition of metallic LSMO. The barrier height of the Mott-insulator region is only 55 meV, which enables the large MR ratio. Furthermore, a successful current modulation, which is a fundamental functionality for spin transistors, is shown. These results open up a new avenue for realizing oxide planar circuits with unique functionalities that conventional semiconductors cannot achieve.

Giant spin-to-charge conversion at an all-epitaxial single-crystal-oxide Rashba interface with a strongly correlated metal interlayer.

The two-dimensional electron gas (2DEG) formed at interfaces between SrTiO3 (STO) and other oxide insulating layers is promising for use in efficient spin-charge conversion due to the large Rashba spin-orbit interaction (RSOI). However, these insulating layers on STO prevent the propagation of a spin current injected from an adjacent ferromagnetic layer. Moreover, the mechanism of the spin-current flow in these insulating layers is still unexplored. Here, using a strongly correlated polar-metal LaTiO3+δ (LTO) interlayer and the 2DEG formed at the LTO/STO interface in an all-epitaxial heterostructure, we demonstrate giant spin-to-charge current conversion efficiencies, up to ~190 nm, using spin-pumping ferromagnetic-resonance voltage measurements. This value is the highest among those reported for all materials, including spin Hall systems. Our results suggest that the strong on-site Coulomb repulsion in LTO and the giant RSOI of LTO/STO may be the key to efficient spin-charge conversion with suppressed spin-flip scattering. Our findings highlight the hidden inherent possibilities of oxide interfaces for spin-orbitronics applications.

Valence-band structure of the ferromagnetic semiconductor GaMnAs studied by spin-dependent resonant tunneling spectroscopy.

The valence-band structure and the Fermi level (E(F)) position of ferromagnetic-semiconductor GaMnAs are quantitatively investigated by electrically detecting the resonant tunneling levels of a GaMnAs quantum well (QW) in double-barrier heterostructures. The resonant level from the heavy-hole first state is clearly observed in the metallic GaMnAs QW, indicating that holes have a high coherency and that E(F) exists in the band gap. Clear enhancement of tunnel magnetoresistance induced by resonant tunneling is demonstrated in these double-barrier heterostructures.

High-Mobility 2D Hole Gas at a SrTiO3 Interface.

Strontium titanate (SrTiO3 or STO) is important for oxide-based electronics as it serves as a standard substrate for a wide range of high-temperature superconducting cuprates, colossal magnetoresistive manganites, and multiferroics. Moreover, in its heterostructures with different materials, STO exhibits a broad spectrum of important physics such as superconductivity, magnetism, the quantum Hall effect, giant thermoelectric effect, and colossal ionic conductivity, most of which emerge in a two-dimensional (2D) electron gas (2DEG) formed at an STO interface. However, little is known about its counterpart system, a 2D hole gas (2DHG) at the STO interface. Here, a simple way of realizing a 2DHG with an ultrahigh mobility of 24 000 cm2 V-1 s-1 is demonstrated using an interface between STO and a thin amorphous FeOy layer, made by depositing a sub-nanometer-thick Fe layer on an STO substrate at room temperature. This mobility is the highest among those reported for holes in oxides. The carrier type can be switched from p-type (2DHG) to n-type (2DEG) by controlling the Fe thickness. This unprecedented method of forming a 2DHG at an STO interface provides a pathway to unexplored hole-related physics in this system and enables extremely low-cost and high-speed oxide electronics.

Efficient full spin-orbit torque switching in a single layer of a perpendicularly magnetized single-crystalline ferromagnet.

Spin-orbit torque (SOT), which is induced by an in-plane electric current via large spin-orbit coupling, enables an innovative method of manipulating the magnetization of ferromagnets by means of current injection. In conventional SOT bilayer systems, the magnetization switching efficiency strongly depends on the interface quality and the strength of the intrinsic spin Hall Effect. Here, we demonstrate highly efficient full SOT switching achieved by applying a current in a single layer of perpendicularly magnetized ferromagnetic semiconductor GaMnAs with an extremely small current density of ∼3.4 × 105 A cm-2, which is two orders of magnitude smaller than that needed in typical metal bilayer systems. This low required current density is attributed to the intrinsic bulk inversion asymmetry of GaMnAs as well as its high-quality single crystallinity and large spin polarization. Our findings will contribute to advancements in the electrical control of magnetism and its practical application in semiconductor devices.

Large current modulation and tunneling magnetoresistance change by a side-gate electric field in a GaMnAs-based vertical spin metal-oxide-semiconductor field-effect transistor.

A vertical spin metal-oxide-semiconductor field-effect transistor (spin MOSFET) is a promising low-power device for the post scaling era. Here, using a ferromagnetic-semiconductor GaMnAs-based vertical spin MOSFET with a GaAs channel layer, we demonstrate a large drain-source current IDS modulation by a gate-source voltage VGS with a modulation ratio up to 130%, which is the largest value that has ever been reported for vertical spin field-effect transistors thus far. We find that the electric field effect on indirect tunneling via defect states in the GaAs channel layer is responsible for the large IDS modulation. This device shows a tunneling magnetoresistance (TMR) ratio up to ~7%, which is larger than that of the planar-type spin MOSFETs, indicating that IDS can be controlled by the magnetization configuration. Furthermore, we find that the TMR ratio can be modulated by VGS. This result mainly originates from the electric field modulation of the magnetic anisotropy of the GaMnAs ferromagnetic electrodes as well as the potential modulation of the nonmagnetic semiconductor GaAs channel layer. Our findings provide important progress towards high-performance vertical spin MOSFETs.

Ultrafast magnetization modulation induced by the electric field component of a terahertz pulse in a ferromagnetic-semiconductor thin film.

High-speed magnetization control of ferromagnetic films using light pulses is attracting considerable attention and is increasingly important for the development of spintronic devices. Irradiation with a nearly monocyclic terahertz pulse, which can induce strong electromagnetic fields in ferromagnetic films within an extremely short time of less than ~1 ps, is promising for damping-free high-speed coherent control of the magnetization. Here, we successfully observe a terahertz response in a ferromagnetic-semiconductor thin film. In addition, we find that a similar terahertz response is observed even in a non-magnetic semiconductor and reveal that the electric-field component of the terahertz pulse plays a crucial role in the magnetization response through the spin-carrier interactions in a ferromagnetic-semiconductor thin film. Our findings will provide new guidelines for designing materials suitable for ultrafast magnetization reversal.

Artificial control of the bias-voltage dependence of tunnelling-anisotropic magnetoresistance using quantization in a single-crystal ferromagnet.

A major issue in the development of spintronic memory devices is the reduction of the power consumption for the magnetization reversal. For this purpose, the artificial control of the magnetic anisotropy of ferromagnetic materials is of great importance. Here, we demonstrate the control of the carrier-energy dependence of the magnetic anisotropy of the density of states (DOS) using the quantum size effect in a single-crystal ferromagnetic material, GaMnAs. We show that the mainly twofold symmetry of the magnetic anisotropy of DOS, which is attributed to the impurity band, is changed to a fourfold symmetry by enhancing the quantum size effect in the valence band of the GaMnAs quantum wells. By combination with the gate electric-field control technique, our concept of the usage of the quantum size effect for the control of the magnetism will pave the way for the ultra-low-power manipulation of magnetization in future spintronic devices.

Magnetic anisotropy control by applying an electric field to the side surface of ferromagnetic films.

Reducing the power consumption necessary for magnetization reversal is one of the most crucial issues facing spintronics devices. Electric field control of the magnetic anisotropy of ferromagnetic thin films is a promising method to solve this problem. However, the electric field is believed to be effective only within several nanometres of the surface in ferromagnetic metals because of its short Thomas-Fermi screening length, which prevents its practical application to devices. Herein, we successfully modulate the magnetic anisotropy of the entire region of the ferromagnetic layers in the elongated mesas of vertical spin field-effect transistors with widths as large as ~500 nm by applying an electric field to the side surface of the metallic GaMnAs-based mesas through an electric double layer. Our results will open up a new pathway for spintronics devices with ultra-low power consumption.

Hidden peculiar magnetic anisotropy at the interface in a ferromagnetic perovskite-oxide heterostructure.

Understanding and controlling the interfacial magnetic properties of ferromagnetic thin films are crucial for spintronic device applications. However, using conventional magnetometry, it is difficult to detect them separately from the bulk properties. Here, by utilizing tunneling anisotropic magnetoresistance in a single-barrier heterostructure composed of La0.6Sr0.4MnO3 (LSMO)/LaAlO3 (LAO)/Nb-doped SrTiO3 (001), we reveal the presence of a peculiar strong two-fold magnetic anisotropy (MA) along the [110]c direction at the LSMO/LAO interface, which is not observed in bulk LSMO. This MA shows unknown behavior that the easy magnetization axis rotates by 90° at an energy of 0.2 eV below the Fermi level in LSMO. We attribute this phenomenon to the transition between the e g and t 2g bands at the LSMO interface. Our finding and approach to understanding the energy dependence of the MA demonstrate a new possibility of efficient control of the interfacial magnetic properties by controlling the band structures of oxide heterostructures.

Sudden restoration of the band ordering associated with the ferromagnetic phase transition in a semiconductor.

The band ordering of semiconductors is an important factor in determining the mobility and coherence of the wave function of carriers, and is thus a key factor in device performance. However, in heavily doped semiconductors, the impurities substantially disturb the band ordering, leading to significant degradation in performance. Here, we present the unexpected finding that the band ordering is suddenly restored in Mn-doped GaAs ((Ga,Mn)As) when the Mn concentration slightly exceeds ∼0.7% despite the extremely high doping concentration; this phenomenon is very difficult to predict from the general behaviour of doped semiconductors. This phenomenon occurs with a ferromagnetic phase transition, which is considered to have a crucial role in generating a well-ordered band structure. Our findings offer possibilities for ultra-high-speed quantum-effect spin devices based on semiconductors.

Room-temperature local ferromagnetism and its nanoscale expansion in the ferromagnetic semiconductor Ge(1-x)Fex.

We investigate the local electronic structure and magnetic properties of the group-IV-based ferromagnetic semiconductor, Ge(1-x)Fex (GeFe), using soft X-ray magnetic circular dichroism. Our results show that the doped Fe 3d electrons are strongly hybridized with the Ge 4p states, and have a large orbital magnetic moment relative to the spin magnetic moment; i.e., morb/mspin ≈ 0.1. We find that nanoscale local ferromagnetic regions, which are formed through ferromagnetic exchange interactions in the high-Fe-content regions of the GeFe films, exist even at room temperature, well above the Curie temperature of 20-100 K. We observe the intriguing nanoscale expansion of the local ferromagnetic regions with decreasing temperature, followed by a transition of the entire film into a ferromagnetic state at the Curie temperature.

Long spin-relaxation time in a single metal nanoparticle.

Spin-relaxation time is key to the performance of spin-based devices. Although the spin-relaxation times of semiconductor materials are typically approximately 100 ns (ref. 3), they are on the order of picoseconds in bulk metals due to the high density of scattering centres. In metallic nanoparticles, the spin-relaxation times can be strongly enhanced due to the quantum size effect, reaching 150 ns in cobalt nanoparticles. Here, we show that for extra electrons confined in a single ferromagnetic-metal MnAs nanoparticle embedded in a GaAs semiconductor matrix, the spin-relaxation time can reach 10 micros at 2 K, which is seven orders of magnitude longer than those of conventional metallic thin film or bulk systems, and the longest value ever reported for metallic nanoparticles. This long relaxation time is made possible by using epitaxially grown single-crystal devices with abrupt interfaces, and by avoiding surface contamination of the MnAs nanoparticle. Such a long spin-relaxation time can be very useful in nanoscale spintronic devices.