Effect of Extremely Short-Sized MWCNT as Additive Material in High Surface Area Activated Carbon and Its Enhanced Electrical LIC Performance.

Extremely short-sized multi-wall carbon nanotube (CNT) and high surface area activated carbon were used to increase the electrical performance of lithium-ion capacitors (LIC). After electrodes were synthesized using extremely short-sized CNTs and high specific surface area activated carbon, their electrochemical characteristics were evaluated by XRD, SEM, TEM, cyclic voltammetry, EIS, BET, adoption isotherm, t-plot, and pore size distribution. In the process of electrode preparation using extremely short-sized CNTs and high specific surface area activated carbon, CNTs certainly caused a space-filling effect between these two materials, which had a significant effect on the evaluation of electrical characteristics. These relationships were demonstrated by the results of adsorption-desorption isotherm, pore size distribution, t-plot, and BJH plot. Particularly, in the electrochemical cyclic test, as the content of CNT increased, the current density significantly increased with the formation of a near-perfect rectangular shape. This tendency also exhibited excellent characteristics in a t-I plot, Tafel plot, and LSV plot, which clearly affected the electrochemical oxidation-reduction reaction due to the densification of filling density and space structure by adding extremely short-sized CNTs to the active material. In addition, YP80_CNT3 formed a specific resistance value in the range of 7.2 to 6.2 Ω/cm2, showing significantly reduced values compared to other samples. This research presented herein offers a promising route for the rational design of MWCNT and stable electrochemical reaction with LIC working mechanism.

Surface Modification Effect and Electrochemical Performance of LiOH-High Surface Activated Carbon as a Cathode Material in EDLC.

This study aimed to improve the performance of the activated carbon-based cathode by increasing the Li content and to analyze the effect of the combination of carbon and oxidizing agent. The crystal structure and chemical structure phase of Li-high surface area activated carbon material (Li-HSAC) was analyzed by X-ray diffraction (XRD) and Raman spectroscopy, the surface state and quantitative element by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and the surface properties with pore-size distribution by Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH) and t-plot methods. The specific surface area of the Li-YP80F is 1063.2 m2/g, micropore volume value is 0.511 cm3/g and mesopore volume is 0.143 cm3/g, and these all values are higher than other LiOH-treated carbon. The surface functional group was analyzed by a Boehm titration, and the higher number of acidic groups compared to the target facilitated the improved electrolyte permeability, reduced the interface resistance and increased the electrochemical properties of the cathode. The oxidizing agent of LiOH treated high surface area of activated carbon was used for the cathode material for EDLC (electric double layer capacitor) to determine its electrochemical properties and the as-prepared electrode retained excellent performance after 10 cycles and 100 cycles. The anodic and cathodic peak current value and peak segregation of Li-YP80F were better than those of the other two samples, due to the micropore-size and physical properties of the sample. The oxidation peak current value appeared at 0.0055 mA/cm2 current density and the reduction peak value at -0.0014 mA/cm2, when the Li-YP80F sample used to the Cu-foil surface. The redox peaks appeared at 0.0025 mA/cm2 and -0.0009 mA/cm2, in the case of using a Nickel foil, after 10 cycling test. The electrochemical stability of cathode materials was tested by 100 recycling tests. After 100 recycling tests, peak current drop decreased the peak profile became stable. The LiOH-treated high surface area of activated carbon had synergistically upgraded electrochemical activity and superior cycling stability that were demonstrated in EDLC.

Designing a highly near infrared-reflective black nanoparticles for autonomous driving based on the refractive index and principle.

HYPOTHESIS: The development of highly NIR reflective black single-shell hollow nanoparticles (BSS-HNPs) can overcome the Light Detection and Ranging (LiDAR) sensor limitations of dark-tone materials. The crystalline phase of TiO2 and the refractive index can be controlled by calcination temperature. The formation of hollow structure and the refractive index is expected to simultaneously increase the light reflection and LiDAR detectability. EXPERIMENTS: The BSS-HNPs are synthesized using the sol-gel method, calcination, NaBH4 reduction, and etching to form a hollow structure with true blackness. The computational bandgap calculation is conducted to determine the bandgap energy (Eg) of the white and black TiO2 with different crystalline structures. The blackness of the as-synthesized materials is determined by the Commission on Illumination (CIE) L*a*b* color system. FINDINGS: The hydrophilic nature of BSS-HNPs enables the formulation of hydrophilic paints, allowing the mono-layer coating. With the synergistic effects of hollow structure and the refractive index, BSS-HNPs manifested superb NIR reflectance at LiDAR detection wavelengths. The high detectability, blackness, and hollow structure of BSS-HNPs can expand the variety of LiDAR-detectable dark-tone materials.

Designing Novel LiDAR-Detectable Plate-Type Materials: Synthesis, Chemistry, and Practical Application for Autonomous Working Environment.

Plate-type hollow black TiO2 (HL/BT) with a high NIR reflectance was fabricated for the first time as a LiDAR-detectable black material. A TiO2 layer was formed on commercial-grade glass by using the sol-gel method to obtain a plate-type structure. The glass template was then etched with hydrofluoric acid to form a hollow structure, and blackness was further achieved through NaBH4 reduction, which altered the oxidation state of TiO2 to black TixO2x-1 or Ti4+ to Ti3+ and Ti2+. The blackness of the HL/BT material was maintained by a novel approach that involved etching prior to reduction. The thickness of the TiO2 layer was controlled to maximize the NIR reflectance when applied as paint. The HL/BT material with a thickness of 140 nm (HL/BT140) showed a blackness (L*) of 13.3 and high NIR reflectance of 23.6% at a wavelength of 905 nm. This is attributed to the effective light reflection at the interface created by the TiO2 layer and the hollow structure. Plate-type HL/BT140 provides excellent spreadability, durability, and thermal stability in practical paint applications compared with sphere-type materials due to the higher contacting area to the applied surface, making it suitable for use as a LiDAR-detectable inorganic black pigment in autonomous environments.

Recent Advances in Two-Dimensional MXene for Supercapacitor Applications: Progress, Challenges, and Perspectives.

MXene is a type of two-dimensional (2D) transition metal carbide and nitride, and its promising energy storage materials highlight its characteristics of high density, high metal-like conductivity, tunable terminals, and charge storage mechanisms known as pseudo-alternative capacitance. MXenes are a class of 2D materials synthesized by chemical etching of the A element in MAX phases. Since they were first discovered more than 10 years ago, the number of distinct MXenes has grown substantially to include numerous MnXn-1 (n = 1, 2, 3, 4, or 5), solid solutions (ordered and disordered), and vacancy solids. To date, MXenes used in energy storage system applications have been broadly synthesized, and this paper summarizes the current developments, successes, and challenges of using MXenes in supercapacitors. This paper also reports the synthesis approaches, various compositional issues, material and electrode topology, chemistry, and hybridization of MXene with other active materials. The present study also summarizes MXene's electrochemical properties, applicability in pliant-structured electrodes, and energy storage capabilities when using aqueous/non-aqueous electrolytes. Finally, we conclude by discussing how to reshape the face of the latest MXene and what to consider when designing the next generation of MXene-based capacitors and supercapacitors.

A Study on Enhanced Electrorheological Performance of Plate-like Materials via Percolation Gel-like Effect.

The use of plate-like materials to induce a percolation gel-like effect in electrorheological (ER) fluids is sparsely documented. Hence, we dispersed plate-like materials, namely natural mica, synthetic mica, and glass, as well as their pulverized particles, in various concentrations in silicone oil to form ER fluids. Subsequently, the rheological properties of the fluids were evaluated and compared to identify the threshold concentration for percolating a gel-like state. The shear stress and viscoelastic moduli under zero-field conditions confirmed that plate-like materials can be used to induce percolation gel-like effects in ER fluids. This is because of the high aspect ratio of the materials, which enhances their physical stability. In practical ER investigations, ER fluids based on synthetic mica (30.0 wt%) showed the highest yield stress of 516.2 Pa under an electric field strength of 3.0 kV mm-1. This was attributed to the formation of large-cluster networks and additional polarization induced by the ions. This study provides a practical approach for developing a new type of gel-like ER fluid.

Preparation of a High-Performance Asymmetric Supercapacitor by Recycling Aluminum Paper and Filter Components of Heated Tobacco.

In this study, Al paper and cellulose acetate (CA) filters derived from heated tobacco waste were successfully converted into current collectors and active materials for a supercapacitor device. Typically, heated tobacco contains electrically discontinuous Al paper. First, Al was extracted from the tobacco waste using HCl to produce Lewis acid (AlCl3). This acid was then used in an Al electrodeposition process utilizing the chloroaluminate ionic liquid reaction between the acid and the base (RCl) at room temperature. To enhance the conductivity, a supplementary coating of Al metal was applied to the Al paper through electrodeposition, thus re-establishing the electrical continuity of the discontinuous parts and forming an Al-coated current collector. Moreover, the CA filters were carbonized under a nitrogen atmosphere, yielding carbon precursors (C-CA) for the supercapacitor electrodes. To further enhance the electrochemical performance, nickel oxide (NiO) was incorporated into C-CA, resulting in C-CA@NiO with pseudocapacitance. The specific surface area of CA increased with carbonization and the subsequent incorporation of NiO. The as-synthesized C-CA and C-CA@NiO materials were applied to an Al-coated current collector to obtain C-CA- and C-CA@NiO-based electrodes, exhibiting stable electrochemical behavior in the voltage range of -1.0 to 0 V and 0 to 1.0 V, respectively. An asymmetric supercapacitor (ASC) device was assembled with C-CA@NiO and C-CA as the positive and negative electrodes, respectively. This ASC device demonstrated a high specific capacitance of 40.8 F g-1, while widening the operating voltage window to 2.0 V. The high electrochemical performance of the device is attributed to the successful Al electrodeposition, which facilitates the electrical conductivity and increased porosity of the C-CA@NiO and C-CA materials. To the best of our knowledge, this is a pioneering study in regards to the conversion of biomass waste into current collectors and active materials to fabricate a practical ASC device. Our findings highlight the potential of reusing Al paper and CA filters from heated tobacco waste as essential components of energy storage devices.

Novel preparation of functional ß-SiC fiber based In2O3 nanocomposite and controlling of influence factors for the chemical gas sensing.

The gas sensing ability of a pure ß-SiC fiber is limited due to its low-sensitivity and selectivity with poor recovery time during a gas sensing test. The combination of functional ß-SiC fibers with metal-oxide (MO) can lead to excellent electronic conductivity, boosted chemical activity, and high reaction activity with the target gas and ß-SiC-In2O3 sensor material. Influence factors such as amounts of MO, current collectors, and gas species (CO2, O2 and without gas) for the gas sensing ability of ß-SiC-In2O3 nanocomposite were determined at standard room temperature (25 °C) and high temperature (350 °C) conditions. The gas sensing ability of the functional ß-SiC fiber was significantly enhanced by the loading of In2O3 metal-oxide. In addition, the MO junction on the ß-SiC fiber was mainly subjected to the Si-C-O-In bond sensor layer with an effective electron-transfer ability. The gas sensing mechanism was based on the transfer of charges, in which the sensing material acted as an absorber or a donor of charges. The sensor material could use different current- collectors to support the electron transfer and gas sensing ability of the material. A 1:0.5M SiC-In2O3 coated Ni-foil current collector sensor showed better sensing ability for CO2 and O2 gases than other gas sensors at room temperature and high temperature conditions. The sensing result of the electrode was obtained with different current density values without or with gas purging conditions because CO2 and O2 gases had electron acceptor properties. During the gas sensing test, the sensor material donated electrons to target gases. The current value on the CV graph then significantly changed. Our obtained sample analysis data and the gas sensing test adequately demonstrated that MO junctions on functional ß-SiC fibers could improve the sensitivity of a sensor material and particularly upgrade the sensor material for gas sensing.

Temperature dependence for high electrical performance of Mn-doped high surface area activated carbon (HSAC) as additives for hybrid capacitor.

Herein, we manufactured the positive and negative electrodes for the hybrid capacitor. The Mn-doped High surface area of Activated carbon composite used for the positive electrode and as-prepared composite was calcined at 600 °C and 800 °C. The morphological structures and pore-size distributions of MnYP-600HTT and MnYP-800HTT were characterized by means of XRD, SEM, EDAX, TEM, and BET. According to the BET specific surface-area evaluation, MnYP-600HTT and MnYP-800HTT were 1272.6 and 1388.1 m2/g, respectively. Total pore volumes were 0.627 and 0.687 cm3/g, which is beneficial for forming ion-transport channels in electrochemical reactions. The MnYP-600HTT electrode had a high specific capacity of 177.2 mAh/g at 20C, and the capacity retention was 64.8%. During the entire cycling, MnYP-600HTT had excellent cyclic stability in 500 cycles along with high efficiency. The robust design of the MnYP-600HTT and MnYP-800HTT cathode materials introduced in this work pave the way for designing next-generation supercapacitors operating at ultra-high C rates. The Mn-doped high surface of activated carbon had stable energy density and superior cycling stability that were demonstrated in supercapacitor systems.

Novel Micro and Nanostructure of a AgCuInS2-Graphene-TiO2 Ternary Composite for Photocatalytic CO2 Reduction for Methanol Fuel.

Photocatalytic CO2 reduction into hydrocarbon fuels over photocatalysts has hypothetical and reasonably developed into a trendy exploration topic. In this study, the progress of the quaternary nanocomposite containing a graphene-based catalyst was reported; this was fabricated using the hydrothermal technique. The analysis of physical characteristics of the nanocomposite confirmed the interaction between all parts. The quaternary nanocomposite containing the graphene-based catalyst was utilized for carbon dioxide reduction to methanol (CH3OH) under light irradiation. Titanium dioxide (TiO2) and the quaternary nanocomposite of AgCuInS2 were monotonously spread on the graphene exterior. This nanomaterial showed superior activity compared with TiO2 and the binary composite for CO2 conversion, and the obtained result indicates that the synthesized ternary composite enhaces the properties of the photocatalyst in the reduction process.