Transparent Ultramicroelectrodes for Studying Interfacial Charge-Transfer Kinetics of Photoelectrochemical Water Oxidation at TiO2 Nanorods with Scanning Electrochemical Microscopy.

Scanning electrochemical microscopy (SECM) has been extensively applied to the electrochemical analysis of the surfaces and interfaces of a photoelectrochemical (PEC) system. A semiconductor photoelectrode with a well-defined geometry and active surface area comparable to SECM's tip is highly desired for accurately quantifying interfacial charge-transfer activities and photoelectrochemically generated redox species, where the broadening effects due to the mass transfer gradient and nonlocal electron transfer at a planar semiconductor surface can be minimized. Here, we present a newly developed platform as a SECM substrate for investigating semiconductor PEC activities, which is based on a transparent ultramicroelectrode (UME) fabricated by using two-step photolithographic patterning and ion milling methods. This transparent UME with a 25 µm recessed disk shape is fully characterized with SECM for quantifying the interfacial charge-transfer rates of IrCl62-/IrCl63- by comparing with theoretical results from finite element simulations in COMSOL Multiphysics. When coated with TiO2 nanorods as a model semiconductor material, the transparent UME can be used to quantify the catalytic PEC water oxidation in a feedback mode of SECM by sampling tip and substrate current signals simultaneously. This transparent UME-SECM study provides insights into the potential-dependent PEC water oxidation reaction mechanism and the quantitative analysis of photocurrent contributions from water oxidation and the SECM tip-generated redox mediator. The transparent UME-SECM method can be potentially expanded to other SECM operation modes such as surface interrogation for understanding the dynamics of the electrode surfaces and interfaces of a PEC system.

Single-nanoparticle spectroelectrochemistry studies enabled by localized surface plasmon resonance.

This review describes recent progress of spectroelectrochemistry (SEC) analysis of single metallic nanoparticles (NPs) which have strong surface plasmon resonance properties. Dark-field scattering (DFS), photoluminescence (PL), and electrogenerated chemiluminescence (ECL) are three commonly used optical methods to detect individual NPs and investigate their local redox activities in an electrochemical cell. These SEC methods are highly dependent on a strong light-scattering cross-section of plasmonic metals and their electrocatalytic characteristics. The surface chemistry and the catalyzed reaction mechanism of single NPs and their chemical transformations can be studied using these SEC methods. Recent progress in the experimental design and fundamental understanding of single-NP electrochemistry and catalyzed reactions using DFS, PL, and ECL is described along with selected examples from recent publications in this field. Perspectives on the challenges and possible solutions for these SEC methods and potential new directions are discussed.

Electrodeposition of vertically standing Ag nanoplates and nanowires on transparent conductive electrode using porous anodic aluminum oxide template.

We report fabricating vertically standing Ag nanoplates and nanowires on a transparent conductive substrate of indium tin oxides (ITO) with the assistance of a porous anodic aluminum oxide (AAO) template. Two-dimensional Ag nanoplates can be electrodeposited onto an AAO covered ITO surface without using an adhesion layer. Ag nanoplates obtained using AAO templates have 3 × {222} superlattice fringes, different from the 3 × {422} superlattice fringes reported in the previous study. Ag nanowires can be electrodeposited onto ITO which is initially covered with an AAO template through a conductive polymer poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The coverage, diameter, and thickness of Ag nanoplates are strongly dependent on the electrodeposition time. These Ag nanoplates and nanowires are used for surface enhanced Raman spectroscopy (SERS) and the influence of their shape, size, and coverage on SERS enhancement is studied.

NanoCOT: Low-Cost Nanostructured Electrode Containing Carbon, Oxygen, and Titanium for Efficient Oxygen Evolution Reaction.

Developing high-efficiency, durable, and low-cost catalysts based on earth-abundant elements for the oxygen evolution reaction (OER) is essential for renewable energy conversion and energy storage devices. In this study, we report a highly active nanostructured electrode, NanoCOT, which contains carbon, oxygen, and titanium, for efficient OER in alkaline solution. The NanoCOT electrode is synthesized from carbon transformation of TiO2 in an atmosphere of methane, hydrogen, and nitrogen at a high temperature. The NanoCOT exhibits enhanced OER catalytic activity in alkaline solution, providing a current density of 1.33 mA/cm(2) at an overpotential of 0.42 V. This OER current density of a NanoCOT electrode is about 4 times higher than an oxidized Ir electrode and 15 times higher than a Pt electrode because of its nanostructured high surface area and favorable OER kinetics. The enhanced catalytic activity of NanoCOT is attributed to the presence of a continuous energy band of the titanium oxide electrode with predominantly reduced defect states of Ti (e.g., Ti(1+), Ti(2+), and Ti(3+)) formed by chemical reduction with hydrogen and carbon. The OER performance of NanoCOT can also be further enhanced by decreasing its overpotential by 150 mV at a current density of 1.0 mA/cm(2) after coating its surface electrophoretically with 2.0 nm IrOx nanoparticles.

Studies of the pathways open to copper water oxidation catalysts containing proximal hydroxy groups during basic electrocatalysis.

Water oxidation can lead to a sustainable source of energy, but for water oxidation catalysts to be economical they must use earth abundant metals. We report here 2:1 6,6'-dihydroxybipyridine (6,6'-dhbp)/copper complexes that are capable of electrocatalytic water oxidation in aqueous base (pH = 10-14). Two crystal structures of the complex that contains 6,6'-dhbp and copper(II) in a ratio of 2:1 (complex 1) are presented at different protonation states. The thermodynamic acid dissociation constants were measured for complex 1, and these show that the complex is fully deprotonated above pH = 8.3 (i.e., under water oxidation conditions). CW-EPR, ENDOR, and HYSCORE spectroscopy confirmed that the 6,6'-dhbp ligand is bound to the copper ion over a wide pH range which shows how pH influences precatalyst structure. Additional copper(II) complexes were synthesized from the ligands 4,4'-dhbp (complex 2) and 6,6'-dimethoxybipyridine (complexes 3 and 4). A zinc complex of 6,6'-dhbp was also synthesized (complex 5). Crystal structures are reported for 1 (in two protonation states), 3, 4, and 5. Water oxidation studies using several of the above compounds (1, 2, 4, and 5) at pH = 12.6 have illustrated that both copper and proximal OH groups are necessary for water oxidation at a low overpotential. Our most active catalyst 1 was found to have an overpotential of 477 mV for water oxidation at a moderate rate of kcat = 0.356 s(-1) with a competing irreversible oxidation event at a rate of 1.082 s(-1). Furthermore, our combined work supports previous observations in which OH/O(-) groups on the bipyridine rings can hydrogen bond with metal bound substrate, support unusual binding modes, and potentially facilitate proton coupled electron transfer.

Interfacial charge transfer events of BODIPY molecules: single molecule spectroelectrochemistry and substrate effects.

We present single molecule fluorescence and spectroelectrochemistry characteristics of 4,4'-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) bearing two carboxylic acid groups at its 2 and 6 positions. Our study shows a heterogeneous half redox potential distribution for the BODIPY molecules embedded in polystyrene film because of the heterogeneity in their charge transfer rates. Single molecules adsorbed onto a TiO2 surface with ordered nanostructures show surprising fluorescence blinking activity with the shortest ON duration time in comparison to bare glass and indium-tin oxide (ITO) surfaces. Single molecule stability tests show longer ON duration time and a stable fluorescence feature when dispersed in polystyrene thin film than molecules exposed to air. Shorter ON times are observed for molecules. In intimate contact with ITO in comparison to glass substrates. Such a decrease in their fluorescence stability or intensity is explained by charge transfer activities from the dye molecules to the metal oxide surface. Electron transfer and back transfer rates are calculated to illustrate the substrate effects by using a well-established model.

Quantitative MALDI-MS and Imaging of Fungicide Pyrimethanil in Strawberries with 2-Nitrophloroglucinol as an Effective Matrix.

This work explores the use of 2-nitrophloroglucinol (2-NPG) as a matrix for quantitative analysis of the fungicide Pyrimethanil (PYM) in strawberries using matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) and imaging. 2-NPG was selected for PYM analysis for optimum sensitivity and precision compared to common matrices α-cyano-4-hydroxylcinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB). PYM-sprayed strawberries were frozen 0, 1, 3, and 4 days after treatment and sectioned for MALDI imaging. The remaining part of each strawberry was processed using quick easy cheap effective rugged and safe (QuEChERS) extraction and analyzed by MALDI-MS and ultraperformance liquid chromatography multireaction-monitoring (UPLC-MRM). MALDI-MS showed comparable performance to UPLC-MRM in calibration, LOD/LOQ, matrix effect, and recovery, with the benefit of fast analysis. The MALDI imaging results demonstrated that PYM progressively penetrated the interior of the strawberry over time and the PYM concentration on tissue measured by MALDI imaging correlated linearly with MALDI-MS and UPLC-MRM measurements and accounts for 79% MALDI-MS and 85% UPLC-MRM values on average. Additionally, quartz crystal microbalance (QCM) was introduced as a new approach to determine strawberry tissue mass per area for MALDI imaging absolute quantitation with sensitive, direct, and localized measurements. This work demonstrates the first example of absolute quantitative MALDI imaging of pesticides in a heterogeneous plant tissue. The novel use of the 2-NPG matrix in quantitative MALDI-MS and imaging could be applied to other analytes, and the new QCM tissue mass per area method is potentially useful for quantitative MALDI imaging of heterogeneous tissues in general.

A dark-field scattering spectroelectrochemical technique for tracking the electrodeposition of single silver nanoparticles.

Dark-field scattering spectroelectrochemistry is used to analyze the electrochemical formation of individual Ag nanoparticles (NPs) at the surface of an indium tin oxide electrode. Heterogeneities in redox potentials among NPs not visible in bulk electrochemical measurements are presented for the first time. Through correlated electron microscopy, single NP light scattering intensity is related to particle size according to Mie theory, enabling rapid particle size determination and the construction of voltammetric curves for individual NPs.

Electrogenerated chemiluminescence and interfacial charge transfer dynamics of poly(3-hexylthiophene-2,5-diyl) (P3HT)-TiO2 nanoparticle thin film.

We present electrogenerated chemiluminescence (ECL) and photoluminescence (PL) characteristics of poly(3-hexylthiophene-2,5-diyl) (P3HT) thin films incorporated with monodisperse TiO(2) nanoparticles prepared using a hydrothermal reaction in the presence of oleylamine and oleic acid. The ECL turn-on potential decreases in the presence of TiO(2) nanocrystals, accompanied with an increase in ECL intensity. Only a minor ECL quantum efficiency decrease is obtained in the presence of <40 wt% TiO(2), indicating the formation of an effective interpenetrating network of TiO(2) and disordering of polymer packing to allow the ECL coreactant to transport through the film for efficient electroluminescence. In contrast, PL quenching increases with the weight percentage of TiO(2) and significant PL quenching is obtained when the P3HT film contains up to 80 wt% TiO(2) due to charge transfer. Polaron absorption after the photoinduced charge separation in the presence of 80 wt% TiO(2) nanoparticles is significantly enhanced with longer-lived lifetimes of >1000 ps in contrast to the neat P3HT film. The absorption of polarons created at the P3HT-TiO(2) interface is found to increase with the P3HT-TiO(2) interfacial area per unit volume.

Combined optical and electrochemical methods for studying electrochemistry at the single molecule and single particle level: recent progress and perspectives.

We present a review of recent efforts aimed at understanding interfacial charge transfer at the single molecule and single nanoparticle level using the combined methods of traditional electrochemistry and optical spectroscopy with high spatial, spectral, and temporal resolution. Elastic light scattering, surface enhanced Raman scattering (SERS), fluorescence, and electrogenerated chemiluminescence (ECL) techniques have been demonstrated to be powerful tools for the study of interfacial charge transfer events involving a single molecule or nanoparticle and for the characterization of nanostructured electrodes. It is shown that these optical methods enable the exploration of electrochemical events with improved temporal and spatial resolution which are usually obstructed by the ensemble averaging inherent in conventional electrochemical methods. In this report, the current status of the field is reviewed and challenges for future work are discussed.

Spatial and temporal variation of surface-enhanced Raman scattering at Ag nanowires in aqueous solution.

The spatial and temporal variation of local field enhanced Raman scattering (SERS) at Ag nanowires (NWs) in aqueous solution is presented for an improved understanding of the NW structure-SERS enhancement capability relationship. Crossed Ag NWs and Ag NW bundles are found to have SERS enhancement factors much higher than single Ag NWs because of the higher density of interstitials formed by strong surface plasmon coupling when the wires are close to each other. The role of the interstitials of Ag NWs is enhanced by using unpurified Ag NWs containing Ag nanoparticles or decorating the Ag NWs surface with gold nanoparticles using galvanic replacement reaction and electroless deposition methods. This leads to an improved SERS enhancement capability as compared to purified single Ag NWs. Raman imaging reveals a different temporal response of the SERS signal in aqueous solution in comparison to the photoluminescence background of Ag NWs in the absence of Raman-active molecules. Such a different temporal response can be potentially used to separate the SERS signal from the fluorescence background. The Discrete Dipole Approximation (DDA) method is used for the first time to calculate the local field intensity of two crossed and parallel Ag NWs. Heterogeneities in the SERS spatial distribution of the interstitials and their incident-light polarization dependence are illustrated by comparing the SEM image of a selected unpurified Ag NW bundle with its Raman image.

Scanning Electrochemical Microscopy for Chemical Imaging and Understanding Redox Activities of Battery Materials.

Improving the charge storage capacity and lifetime and charging/discharging efficiency of battery systems is essential for large-scale applications such as long-term grid storage and long-range automobiles. While there have been substantial improvements over the past decades, further fundamental research would help provide insights into improving the cost effectiveness of such systems. For example, it is critical to understand the redox activities of cathode and anode electrode materials and stability and the formation mechanism and roles of the solid-electrolyte interface (SEI) that forms at the electrode surface upon an external potential bias. The SEI plays a critical role in preventing electrolyte decay while still allowing charges to flow through the system while serving as a charge transfer barrier. While surface analytical techniques such as X-ray photoelectron (XPS), X-ray diffraction (XRD), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and atomic force microscopy (AFM) provide invaluable information on anode chemical composition, crystalline structure, and morphology, they are often performed ex situ, which can induce changes to the SEI layer after it is removed from the electrolyte. While there have been efforts to combine these techniques using pseudo-in situ approaches via vacuum-compatible devices and inert atmosphere chambers connected to glove boxes, there is still a need for true in situ techniques to obtain results with improved accuracy and precision. Scanning electrochemical microscopy (SECM) is an in situ scanning probe technique that can be combined with optical spectroscopy techniques such as Raman and photoluminescence spectroscopy methods to gain insights into the electronic changes of a material as a function of applied bias. This Review will highlight the potential of SECM and recent reports on combining spectroscopic measurements with SECM to gain insights into the SEI layer formation and redox activities of other battery electrode materials. These insights provide invaluable information for improving the performance of charge storage devices.

Highly conductive nanostructured C-TiO2 electrodes with enhanced electrochemical stability and double layer charge storage capacitance.

The present work reports the structural and electrochemical properties of carbon-modified nanostructured TiO(2) electrodes (C-TiO(2)) prepared by anodizing titanium in a fluoride-based electrolyte followed by thermal annealing in an atmosphere of methane and hydrogen in the presence of Fe precursors. The C-TiO(2) nanostructured electrodes are highly conductive and contain more than 1 × 10(10) /cm(2) of nanowires or nanotubes to enhance their double layer charge capacitance and electrochemical stability. Electrogenerated chemiluminescence (ECL) study shows that a C-TiO(2) electrode can replace noble metal electrodes for ultrasensitive ECL detection. Dynamic potential control experiments of redox reactions show that the C-TiO(2) electrode has a broad potential window for a redox reaction. Double layer charging capacitance of the C-TiO(2) electrode is found to be 3 orders of magnitude higher than an ideal planar electrode because of its high surface area and efficient charge collection capability from the nanowire structured surface. The effect of anodization voltage, surface treatment with Fe precursors for carbon modification, the barrier layer between the Ti substrate, and anodized layer on the double layer charging capacitance is studied. Ferrocene carboxylic acid binds covalently to the anodized Ti surface forming a self-assembled monolayer, serving as an ideal precursor layer to yield C-TiO(2) electrodes with better double layer charging performance than the other precursors.

Reductive-oxidation electrogenerated chemiluminescence (ECL) generation at a transparent silver nanowire electrode.

We present the fabrication of a conductive, transparent electrode composed of Ag nanowires (NW) for spectroelectrochemical studies. Reductive-oxidation electrogenerated chemiluminescence (ECL) of Ru(bpy)3(2+) is generated at the Ag NW electrode in the presence of hydrogen peroxide and collected through the new transparent electrode. The ECL performance at the new nanostructured electrode is compared with several other electrodes, including bulk silver wire, glassy carbon disk, and thermally reduced transparent graphene oxide (tr-GO) electrodes. The Ag NW electrode is found to be the best electrode for the reductive-oxidation ECL generation because of its catalytic properties with respect to the reduction of hydrogen peroxide and its high surface area.

Bonding interface boosts the intrinsic activity and durability of NiSe@Fe2O3 heterogeneous electrocatalyst for water oxidation.

The intrinsic activity and durability of oxygen evolution reaction (OER) electrocatalysts are mainly dominated by the surface and interface properties of active materials. Herein, a core-shell heterogeneous structure (NF/NiSe@Fe2O3) is fabricated via two-step hydrothermal method, which exhibits a low overpotential of 220 mV (or 282 mV) at 10 mA/cm2 (or 200 mA/cm2), a small Tafel slope of 36.9 mV/dec, and long-term stability (~230 h) in 1 mol/L KOH for OER. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy reveal the (oxy)hydroxide-rich surface and strong coupling interface between NiSe and Fe2O3 via the Fe-Se bond. Density functional theory calculation suggests that the d-band center and electronic state of NiSe@Fe2O3 heterojunction are well optimized due to the formation of Fe-Se bond, which is favorable for the enhanced OER activity because of the easy adsorption of oxygen-containing intermediates and desorption of O2 in the OER process. In addition, the unique core-shell structure and robust bonding interface are responsible for the good stability for OER. This work provides fundamental insights on the bonding effect that determine the performance of OER electrocatalyst.

Electrogenerated Chemiluminescence and Spectroelectrochemistry Characteristics of Blue Photoluminescence Perovskite Quantum Dots.

Lead-based perovskite MAPbX3 (MA = CH3NH3, X = Cl and Br) has shown great potential benefits to advance modern optoelectronics and clean energy harvesting devices. Poor structural stability is one of the major challenges of MAPbX3 perovskite materials to overcome to achieve desired device performance. Here, we present the electrochemical stability study of CH3NH3PbCl1.08Br1.92 quantum dots (QDs) by electrogenerated chemiluminescence (ECL) and photoluminescence (PL) spectroelectrochemistry methods. Electrochemical anodization of pristine MAPbX3 QD film results in the disproportionate loss of methylammonium and halide ions (X = Cl and Br). ECL efficiency and stability of perovskite QDs in the presence of coreactant tripropyl amine (TPrA) can be greatly improved after being incorporated into a polystyrene (PS) matrix. Mass spectrum and X-ray photoelectron spectroscopy (XPS) measurements were used to provide chemical composition variation details of QDs, which are responsible for the ECL and PL characteristics (e.g., wavelength redshift) of perovskite QDs in an electrochemical cell.

Investigating the Redox Properties of Two-Dimensional MoS2 Using Photoluminescence Spectroelectrochemistry and Scanning Electrochemical Cell Microscopy.

Control over photophysical and chemical properties of two-dimensional (2D) transition metal dichalcogenides (TMDs) is the key to advance their applications in next-generation optoelectronics. Although chemical doping and surface modification with plasmonic metals have been reported to tune the photophysical and catalytic properties of 2D TMDs, there have been few reports of tuning optical properties using dynamic electrochemical control of electrode potential. Herein, we report (1) the photoluminescence (PL) enhancement and red-shift in the PL spectrum of 2D MoS2, synthesized by chemical vapor deposition and subsequent transfer onto an indium tin oxide electrode, upon electrochemical anodization and (2) spatial heterogeneities in its photoelectrochemical (PEC) activities. Spectroelectrochemistry shows that positive electrochemical bias causes an initial ten-fold increase in the PL intensity followed by a quick decrease in the enhancement. The PL enhancement and spectrum red-shift are associated with the decrease in nonradiative decay rates of excitons formed upon electrochemical anodization of 2D MoS2. Additionally, scanning electrochemical cell microscopy (SECCM) study shows that the 2D MoS2 crystal is spatially sensitive to PEC oxidation at positive potentials. SECCM also shows a photocurrent increase caused by spatially heterogeneous edge-type defect sites of the crystal.

Precious metal-free solar-to-fuel generation: SSM-DSCs powering water splitting with NanoCOT and NiMoZn electrocatalysts.

A precious metal-free sequential series multijunction dye-sensitized solar cell (SSM-DSC)-powered water electrolysis system is demonstrated using NanoCOT and NiMoZn electrodes. A stable 3.9% solar-to-hydrogen (STH) efficiency is achieved using a recently reported black organic dye and graphene electrodes for DSCs.

High-Throughput Screening and Surface Interrogation Studies of Au-Modified Hematite Photoanodes by Scanning Electrochemical Microscopy for Solar Water Splitting.

Au-modified hematite photoanode was screened for photoelectrochemical (PEC) water oxidation by the scanning electrochemical microscopy (SECM) technique with a scanning probe of the optical fiber for visible light irradiation of the photoanode substrate. The Au-modified hematite exhibited an enhancement in the photocurrent up to 3% (at. %), and the performance drop was observed with 4-10% (at. %) of Au modification. Subsequently, pristine and Au-modified hematite thin-film photoanodes were fabricated by the spin-coating method to confirm the results of SECM. The PEC response confirms that 3% (at. %) of Au is the optimum concentration to provide the best enhancement of PEC water oxidation with a ∼6-fold increase compared to the pristine hematite sample. Direct Au oxidation, charge recombination, and strong light absorption by Au are responsible for the decrease in PEC performance when the Au percentage is above 3%. The pristine and Au-modified hematite materials were also characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. Au was found to exist in the form of embedded metallic nanoparticles in the modified hematite. Mott-Schottky analysis of the bulk samples confirms an improvement in charge carrier density for the Au-modified hematite. Additionally, there was little plasmonic enhancement as evidenced by UV-vis spectroscopy, with a minimal contribution toward photoactivity. Surface interrogation SECM quantitatively probed the reactive surface states (RSSs) such as OH• formed on hematite and Au-modified hematite surfaces during water oxidation. The coverage of RSSs was found to increase with the substrate potential. The interrogated charge under the dark condition for the 3% Au-modified hematite sample is higher than the pristine hematite sample because of the enhanced electronic conductivity of the hematite film.

Photoelectrochemical study of carbon-modified p-type Cu2O nanoneedles and n-type TiO2-x nanorods for Z-scheme solar water splitting in a tandem cell configuration.

Nanostructured photoelectrodes with a high surface area and tunable optical and electrical properties can potentially benefit a photoelectrochemical (PEC) water splitting system. The PEC performance of a nanostructured photoelectrode is usually quantified in a standard three-electrode configuration under potential-assisted conditions because of the additional overpotentials for the two half-reactions of water splitting. However, it is a necessity to fully recognize their potential to split water under unassisted conditions by designing a tandem cell that can provide sufficient voltage to split water. Herein, we present a tandem cell consisting of carbon-modified cuprous oxide (C/Cu2O) nanoneedles and oxygen-deficient titanium dioxide (TiO2-x ) nanorods for unassisted solar water splitting. The synthesized photoelectrodes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and electrochemical impedance spectroscopy (EIS) techniques. The tandem cell performance was analyzed by measuring the current-voltage responses in various photoelectrode configurations to validate the collective contributions of both photoelectrodes to unassisted solar water splitting. The PEC properties of C/Cu2O nanoneedles coupled with TiO2-x nanorods in a tandem configuration exhibited a photocurrent density of 64.7 µA cm-2 in the absence of any redox mediator and external bias. This photocurrent density can be further enhanced with an application of external bias. Moreover, the heterojunction formed by the above-mentioned nanostructured photoelectrodes in intimate contact and in the absence of water exhibited 2 µA cm-2 UV photoresponsivity at 1.5 V with promising rectifying characteristics of a diode.