Connection between protein-tyrosine kinase inhibition and coping with oxidative stress in Bacillus subtilis.

In bacteria, attenuation of protein-tyrosine phosphorylation occurs during oxidative stress. The main described mechanism behind this effect is the H2O2-triggered conversion of bacterial phospho-tyrosines to protein-bound 3,4-dihydroxyphenylalanine. This disrupts the bacterial tyrosine phosphorylation-based signaling network, which alters the bacterial polysaccharide biosynthesis. Herein, we report an alternative mechanism, in which oxidative stress leads to a direct inhibition of bacterial protein-tyrosine kinases (BY-kinases). We show that DefA, a minor peptide deformylase, inhibits the activity of BY-kinase PtkA when Bacillus subtilis is exposed to oxidative stress. High levels of PtkA activity are known to destabilize B. subtilis pellicle formation, which leads to higher sensitivity to oxidative stress. Interaction with DefA inhibits both PtkA autophosphorylation and phosphorylation of its substrate Ugd, which is involved in exopolysaccharide formation. Inactivation of defA drastically reduces the capacity of B. subtilis to cope with oxidative stress, but it does not affect the major oxidative stress regulons PerR, OhrR, and Spx, indicating that PtkA inhibition is the main pathway for DefA involvement in this stress response. Structural analysis identified DefA residues Asn95, Tyr150, and Glu152 as essential for interaction with PtkA. Inhibition of PtkA depends also on the presence of a C-terminal α-helix of DefA, which resembles PtkA-interacting motifs from known PtkA activators, TkmA, SalA, and MinD. Loss of either the key interacting residues or the inhibitory helix of DefA abolishes inhibition of PtkA in vitro and impairs postoxidative stress recovery in vivo, confirming the involvement of these structural features in the proposed mechanism.

Evolutionary Analysis of the Bacillus subtilis Genome Reveals New Genes Involved in Sporulation.

Bacilli can form dormant, highly resistant, and metabolically inactive spores to cope with extreme environmental challenges. In this study, we examined the evolutionary age of Bacillus subtilis sporulation genes using the approach known as genomic phylostratigraphy. We found that B. subtilis sporulation genes cluster in several groups that emerged at distant evolutionary time-points, suggesting that the sporulation process underwent several stages of expansion. Next, we asked whether such evolutionary stratification of the genome could be used to predict involvement in sporulation of presently uncharacterized genes (y-genes). We individually inactivated a representative sample of uncharacterized genes that arose during the same evolutionary periods as the known sporulation genes and tested the resulting strains for sporulation phenotypes. Sporulation was significantly affected in 16 out of 37 (43%) tested strains. In addition to expanding the knowledge base on B. subtilis sporulation, our findings suggest that evolutionary age could be used to help with genome mining.

Graphene-Based Antimicrobial Biomedical Surfaces.

Biomedical application of graphene derivatives have been intensively studied in last decade. With the exceptional structural, thermal, electrical, and mechanical properties, these materials have attracted immense attention of biomedical scientists to utilize graphene derivatives in biomedical devices to improve their performance or to achieve desired functions. Surfaces of graphene derivatives including graphite, graphene, graphene oxide and reduce graphene oxide have been demonstrated to pave an excellent platform for antimicrobial behavior, enhanced biocompatibility, tissue engineering, biosensors and drug delivery. This review focuses on the recent advancement in the research of biomedical devices with the coatings or highly structured polymer nanocomposite surfaces of graphene derivatives for antimicrobial activity and sterile surfaces comprising an entirely new class of antibacterial materials. Overall, we aim to highlight on the potential of these materials, current understanding and knowledge gap in the antimicrobial behavior and biocompatibility to be utilized of their coatings to prevent the cross infections.

Graphene-Based Sensor for Detection of Bacterial Pathogens.

Microbial colonization to biomedical surfaces and biofilm formation is one of the key challenges in the medical field. Recalcitrant biofilms on such surfaces cause serious infections which are difficult to treat using antimicrobial agents, due to their complex structure. Early detection of microbial colonization and monitoring of biofilm growth could turn the tide by providing timely guidance for treatment or replacement of biomedical devices. Hence, there is a need for sensors, which could generate rapid signals upon bacterial colonization. In this study, we developed a simple prototype sensor based on pristine, non-functionalized graphene. The detection principle is a change in electrical resistance of graphene upon exposure to bacterial cells. Without functionalization with specific receptors, such sensors cannot be expected to be selective to certain bacteria. However, we demonstrated that two different bacterial species can be detected and differentiated by our sensor due to their different growth dynamics, adherence pattern, density of adhered bacteria and microcolonies formation. These distinct behaviors of tested bacteria depicted distinguishable pattern of resistance change, resistance versus gate voltage plot and hysteresis effect. This sensor is simple to fabricate, can easily be miniaturized, and can be effective in cases when precise identification of species is not needed.

Precontrolled Alignment of Graphite Nanoplatelets in Polymeric Composites Prevents Bacterial Attachment.

Graphene coatings composed of vertical spikes are shown to mitigate bacterial attachment. Such coatings present hydrophobic edges of graphene, which penetrate the lipid bilayers causing physical disruption of bacterial cells. However, manufacturing of such surfaces on a scale required for antibacterial applications is currently not feasible. This study explores whether graphite can be used as a cheaper alternative to graphene coatings. To examine this, composites of graphite nanoplatelets (GNP) and low-density polyethylene (LDPE) are extruded in controlled conditions to obtain controlled orientation of GNP flakes within the polymer matrix. Flakes are exposed by etching the surface of GNP-LDPE nanocomposites and antibacterial activity is evaluated. GNP nanoflakes on the extruded samples interact with bacterial cell membranes, physically damaging the cells. Bactericidal activity is observed dependent on orientation and nanoflakes density. Composites with high density of GNP (≥15%) present two key advantages: i) they decrease bacterial viability by a factor of 99.9999%, which is 10 000-fold improvement on the current benchmark, and ii) prevent bacterial colonization, thus drastically reducing the numbers of dead cells on the surface. The latter is a key advantage for longer-term biomedical applications, since these surfaces will not have to be cleaned or replaced for longer periods.

The Exo-Polysaccharide Component of Extracellular Matrix is Essential for the Viscoelastic Properties of Bacillus subtilis Biofilms.

Bacteria are known to form biofilms on various surfaces. Biofilms are multicellular aggregates, held together by an extracellular matrix, which is composed of biological polymers. Three principal components of the biofilm matrix are exopolysaccharides (EPS), proteins, and nucleic acids. The biofilm matrix is essential for biofilms to remain organized under mechanical stress. Thanks to their polymeric nature, biofilms exhibit both elastic and viscous mechanical characteristics; therefore, an accurate mechanical description needs to take into account their viscoelastic nature. Their viscoelastic properties, including during their growth dynamics, are crucial for biofilm survival in many environments, particularly during infection processes. How changes in the composition of the biofilm matrix affect viscoelasticity has not been thoroughly investigated. In this study, we used interfacial rheology to study the contribution of the EPS component of the matrix to viscoelasticity of Bacillus subtilis biofilms. Two strategies were used to specifically deplete the EPS component of the biofilm matrix, namely (i) treatment with sub-lethal doses of vitamin C and (ii) seamless inactivation of the eps operon responsible for biosynthesis of the EPS. In both cases, the obtained results suggest that the EPS component of the matrix is essential for maintaining the viscoelastic properties of bacterial biofilms during their growth. If the EPS component of the matrix is depleted, the mechanical stability of biofilms is compromised and the biofilms become more susceptible to eradication by mechanical stress.

A Sustainable Approach for the Green Synthesis of Silver Nanoparticles from Solibacillus isronensis sp. and Their Application in Biofilm Inhibition.

The use of bacteria as nanofactories for the green synthesis of nanoparticles is considered a sustainable approach, owing to the stability, biocompatibility, high yields and facile synthesis of nanoparticles. The green synthesis provides the coating or capping of biomolecules on nanoparticles surface, which confer their biological activity. In this study, we report green synthesis of silver nanoparticles (AgNPs) by an environmental isolate; named as AgNPs1, which showed 100% 16S rRNA sequence similarity with Solibacillus isronensis. UV/visible analysis (UV/Vis), transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR) were used to characterize the synthesized nanoparticles. The stable nature of nanoparticles was studied by thermogravimetric analysis (TGA) and inductively coupled plasma mass spectrometry (ICP-MS). Further, these nanoparticles were tested for biofilm inhibition against Escherichia coli and Pseudomonas aeruginosa. The AgNPs showed minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values of 3.12 µg/mL and 6.25 µg/mL for E. coli, and 1.56 µg/mL and 3.12 µg/mL for P. aeruginosa, respectively.

Effect of brief periodic fluoride treatments on the virulence and composition of a cariogenic biofilm.

The present study investigated the effect of periodic 1-min fluoride treatments on Streptococcus mutans biofilms and then determined the relationship between anti-biofilm activity, treatment frequency, and fluoride concentration using a linear-fitting procedure. S. mutans biofilms were periodically treated (1-min/treatment) with fluoride during biofilm formation and analyzed using microbiological methods, confocal microscopy, and real-time PCR. The results indicated that reductions in the dry weight and acidogenicity of biofilms due to periodic fluoride treatment occurred in a concentration dependent manner. The reduction in dry weight without affecting bacterial cell viability was observed mainly due to the inhibitory effect of fluoride on gtfB and gtfC gene expression, which suppresses EPS production and avoids reduction of the pH below the critical point on the tooth surface. This study suggests that brief periodic exposure to appropriate fluoride concentrations through mouthwashes and toothpastes may affect the virulence and composition of cariogenic biofilms and subsequently prevent dental caries.

Gold Nanoparticles in Diagnostics and Therapeutics for Human Cancer.

The application of nanotechnology for the treatment of cancer is mostly based on early tumor detection and diagnosis by nanodevices capable of selective targeting and delivery of chemotherapeutic drugs to the specific tumor site. Due to the remarkable properties of gold nanoparticles, they have long been considered as a potential tool for diagnosis of various cancers and for drug delivery applications. These properties include high surface area to volume ratio, surface plasmon resonance, surface chemistry and multi-functionalization, facile synthesis, and stable nature. Moreover, the non-toxic and non-immunogenic nature of gold nanoparticles and the high permeability and retention effect provide additional benefits by enabling easy penetration and accumulation of drugs at the tumor sites. Various innovative approaches with gold nanoparticles are under development. In this review, we provide an overview of recent progress made in the application of gold nanoparticles in the treatment of cancer by tumor detection, drug delivery, imaging, photothermal and photodynamic therapy and their current limitations in terms of bioavailability and the fate of the nanoparticles.

Effects of combined oleic acid and fluoride at sub-MIC levels on EPS formation and viability of Streptococcus mutans UA159 biofilms.

Despite the widespread use of fluoride, dental caries, a biofilm-related disease, remains an important health problem. This study investigated whether oleic acid, a monounsaturated fatty acid, can enhance the effect of fluoride on extracellular polysaccharide (EPS) formation by Streptococcus mutans UA159 biofilms at sub-minimum inhibitory concentration levels, via microbiological and biochemical methods, confocal fluorescence microscopy, and real-time PCR. The combination of oleic acid with fluoride inhibited EPS formation more strongly than did fluoride or oleic acid alone. The superior inhibition of EPS formation was due to the combination of the inhibitory effects of oleic acid and fluoride against glucosyltransferases (GTFs) and GTF-related gene (gtfB, gtfC, and gtfD) expression, respectively. In addition, the combination of oleic acid with fluoride altered the bacterial biovolume of the biofilms without bactericidal activity. These results suggest that oleic acid may be useful for enhancing fluoride inhibition of EPS formation by S. mutans biofilms, without killing the bacterium.

Effect of 1-Minute Fluoride Treatment on Potential Virulence and Viability of a Cariogenic Biofilm.

Fluoride is a well-studied and widely used agent for the prevention of dental caries. Although dental caries is strongly related to cariogenic biofilms, the effect of brief fluoride treatment on the virulence properties of biofilms has not been well studied. This study evaluated the effect of a 1-min fluoride treatment on the virulence properties and viability of cariogenic biofilms, using a Streptococcus mutans biofilm model. For this study, 46-hour-old S. mutans biofilms were formed on saliva-coated hydroxyapatite discs and were treated with fluoride (0, 30, 300, 1,000, and 2,000 ppm F(-)) for 1 min. Viability and changes in acidogenicity, aciduricity and extracellular polysaccharide (EPS) formation of the biofilms were analyzed using biochemical and microbiological methods (pH drop, H(+) permeability, acid killing, and bacterial colony-forming unit assays). Laser scanning confocal fluorescence microscopy study was also performed. After the 1-min fluoride treatment, acidogenicity, aciduricity, and EPS formation of 46-hour-old S. mutans biofilms were significantly reduced when treated with concentrations ≥300 ppm F(-). The antivirulence activities of the 1-min fluoride treatment increased in a concentration-dependent pattern. However, the 1-min fluoride treatments did not affect viability, biovolume, and microcolony appearance of biofilm bacteria, even at high concentrations. These results suggest that the brief treatment with fluoride at concentrations ≥300 ppm F(-) is an effective measure for controlling cariogenic biofilms.

Identification of linoleic acid, a main component of the n-hexane fraction from Dryopteris crassirhizoma, as an anti-Streptococcus mutans biofilm agent.

Dryopteris crassirhizoma is a semi-evergreen plant. Previous studies have shown the potential of this plant as an agent for the control of cariogenic biofilms. In this study, the main antibacterial components of the plant were identified by correlating gas chromatography-mass spectrometry data with the antibacterial activity of chloroform and n-hexane fractions and then evaluating the activity of the most potent antibacterial component against Streptococcus mutans UA159 biofilms. The most potent antibacterial component was linoleic acid, a main component of the n-hexane fraction. Linoleic acid reduced viability in a dose dependent manner and reduced biofilm accumulation during initial and mature biofilm formation. Furthermore, when the biofilms were briefly treated with linoleic acid (10 min/treatment, a total of six times), the dry weight of the biofilms was significantly diminished. In addition, the anti-biofilm activity of the n-hexane fraction was similar to that of linoleic acid. These results suggest that the n-hexane fraction of D. crassirhizoma and linoleic acid may be useful for controlling cariogenic biofilms.

Vertical graphene nanoarray decorated with Ag nanoparticles exhibits enhanced antibacterial effects.

Bacterial infection of biomedical implants is an important clinical challenge, driving the development of novel antimicrobial materials. The antibacterial effect of vertically aligned graphene as a nanoarray coating has been reported. In this study, vertically aligned graphene nanosheets decorated with silver nanoparticles were fabricated to enhance antibacterial effectiveness. Vertical graphene (VG) nanoflakes were synthesized by plasma-enhanced chemical vapor deposition (PECVD). Ag nanoparticles were attached to the surface of VG through using polydopamine and achieving a sustained release of Ag+. VG loaded with Ag nanoparticles (VGP/Ag) not only prevented bacterial adhesion for a long time, but also exhibited good biocompatibility. This work provides a new venue for designing antibacterial surfaces based on combination of graphene nanoarrays with other nanomaterials, and the results indicate that this approach could be very successful in preventing implant associated infections.

Differences in interaction of graphene/graphene oxide with bacterial and mammalian cell membranes.

Graphene, a single layer, hexagonally packed two-dimensional carbon sheet is an attractive candidate for diverse applications including antibacterial potential and drug delivery. One of the knowledge gaps in biomedical application of graphene is the interaction of these materials with the cells. To address this, we investigated the interaction between graphene materials (graphene and graphene oxide) and plasma membranes of cells (bacterial and mammalian cells). The interactions of four of the most abundant phospholipids in bacteria and mammalian plasma membranes with graphene materials were studied using density functional theory (DFT) at the atomic level. The calculations showed that the mammalian phospholipids have stronger bonding to each other compared to bacterial phospholipids. When the graphene/graphene oxide sheet is approaching the phospholipid pairs, the bacterial pairs exhibit less repulsive interactions, thereby a more stable system with the sheets was found. We also assembled bacterial and mammalian phospholipids into liposomes. We further observed that the bacterial liposomes and cells let the graphene flakes penetrate the membrane. The differential scanning calorimetry measurements of liposomes revealed that the bacterial liposomes have the lowest heat capacity; this strengthens the theoretical predictions of weaker interaction between the bacterial phospholipids compared to the mammalian phospholipids. We further demonstrated that graphene oxide could be internalized into the mammalian liposomes without disrupting the membrane integrity. The results suggest that the weak bonding among bacteria phospholipids and less repulsive force when graphene materials approach, result in graphene materials interacting differently with the bacteria compared to mammalian cells.

Antibacterial applications of biologically synthesized Pichia pastoris silver nanoparticles.

Objectives: This article highlights the biological synthesis of silver nanoparticles (AgNPs) with their characteristic analysis, and it focuses on the application of synthesized NPs against multidrug resistance (MDR) bacteria. A cytotoxicity study was performed to assess the biocompatibility. Methods: Silver nanoparticle (AgNPs) formation was confirmed by different characterization methods such as UV-Vis spectrophotometer, Dynamic light scattering (DLS)- Zeta, Fourier transform infrared (FTIR), and Transmission electron microscope (TEM). The antimicrobial activity of the AgNPs was checked against various bacterial strains of Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Enterococcus faecalis (E. faecalis), and Klebsiella pneumonia (K. pneumonia) by disc diffusion, minimum inhibition concentration test (MIC), and kinetic studies. The cytotoxicity of NPs against the Vero cell line was studied by cytotoxic assay. Results: The primary analysis of the formation of nanoparticles (NPs) was made by UV-Vis spectrophotometric analysis at 400 nm. At the same time, the efficient capping checked by FTIR shows the presence of a functional group at different wavelengths 3284, 1641,1573,1388,1288, and 1068 cm-1. At the same time, the transmission electron microscopic analysis (TEM) and DLS show that the shape and size of the synthesized NPs possess an average size of around ∼10-30 nm with spherical morphology. Further, the zeta potential confirmed the stability of the NPs. While the yield of NPs formation from silver salt was determined by an online yield calculator with the EDX analysis results. Synthesized NPs showed bactericidal effects against all the selected MDR pathogens with nontoxic effects against mammalian cells. Conclusion: Our findings indicate the remarkable antimicrobial activity of the biologically synthesized AgNPs, which can be an antimicrobial agent against multi-drug-resistant bacteria.

Effects of Withania somnifera on the growth and virulence properties of Streptococcus mutans and Streptococcus sobrinus at sub-MIC levels.

The aim of this study was to evaluate the effect of the methanol extract of Withania somnifera (MEW) on the growth and virulence properties of Streptococcus mutans and Streptococcus sobrinus at sub-minimum inhibitory concentration (MIC) levels and to identify the main components of MEW. First, antibacterial activity of MEW against oral bacteria was determined using a micro-dilution method. Then, the effect of MEW on the growth of S. mutans and S. sobrinus was investigated at sub-MIC levels. To test the effect of MEW on the virulence properties of S. mutans and S. sobrinus, assays for acid production, acid tolerance, and biofilm formation were performed at sub-MIC levels. A GC-MS analysis for the main components of MEW was also carried out. MEW showed a broad antibacterial range against oral bacteria (MIC: 0.125-2 mg/mL). At sub-MIC levels, MEW dose-dependently increased doubling times of S. mutans and S. sobrinus up to 258% and 400%, respectively. Furthermore, MEW inhibited acid production, acid tolerance, and biofilm formation of S. mutans and S. sobrinus at sub-MIC levels. The GC-MS analysis revealed the presence of mono- and disaccharides, sugar alcohols, and organic acids as main components. These data suggest that MEW might be useful for restraining physiological activities of cariogenic bacteria.

Antibiotic-Loaded Boron Nitride Nanoconjugate with Strong Performance against Planktonic Bacteria and Biofilms.

Protecting surfaces from biofilm formation presents a significant challenge in the biomedical field. The utilization of antimicrobial component-conjugated nanoparticles is becoming an attractive strategy against infectious biofilms. Boron nitride (BN) nanomaterials have a unique biomedical application value due to their excellent biocompatibility. Here, we developed antibiotic-loaded BN nanoconjugates to combat bacterial biofilms. Antibiofilm testing included two types of pathogens, Staphylococcus aureus and Escherichia coli. Gentamicin was loaded on polydopamine-modified BN nanoparticles (GPBN) to construct a nanoconjugate, which was very effective in killing E. coli and S. aureus planktonic cells. GPBN exhibited equally strong capacity for biofilm destruction, tested on preformed biofilms. A 24 h treatment with the nanoconjugate reduced cell viability by more than 90%. Our results suggest that GPBN adheres to the surface of the biofilm, penetrates inside the biofilm matrix, and finally deactivates the cells. Interestingly, the GPBN coatings also strongly inhibited the formation of bacterial biofilms. Based on these results, we suggest that GPBN could serve as an effective means for treating biofilm-associated infections and as coatings for biofilm prevention.

Inhibition of bacterial adhesion by epigallocatechin gallate attached polymeric membranes.

Microbial adhesion and formation of biofilms cause a serious problem in several areas including but not limited to food spoilage, industrial corrosion and nosocomial infections. These microbial biofilms pose a serious threat to human health since microbial communities in the biofilm matrix are protected with exopolymeric substances and difficult to eradicate with antibiotics. Hence, the prevention of microbial adhesion followed by biofilm formation is one of the promising strategies to prevent these consequences. The attachment of antimicrobial agents, coatings of nanomaterials and synthesis of hybrid materials are widely used approach to develop surfaces having potential to hinder bacterial adhesion and biofilm formation. In this study, epigallocatechin gallate (EGCG) is attached on p(HEMA-co-GMA) membranes to prevent the bacterial colonization. The attachment of EGCG to membranes was proved by Fourier-transform infrared spectroscopy (FT-IR). The synthesized membrane showed porous structure (SEM), and desirable swelling degree, which are ideal when it comes to the application in biotechnology and biomedicine. Furthermore, EGCG attached membrane showed significant potential to prevent the microbial colonization on the surface. The obtained results suggest that EGCG attached polymer could be used as an alternative approach to prevent the microbial colonization on the biomedical surfaces, food processing equipment as well as development of microbial resistant food packaging systems.

Silver Nanoparticles: Bactericidal and Mechanistic Approach against Drug Resistant Pathogens.

This review highlights the different modes of synthesizing silver nanoparticles (AgNPs) from their elemental state to particle format and their mechanism of action against multidrug-resistant and biofilm-forming bacterial pathogens. Various studies have demonstrated that the AgNPs cause oxidative stress, protein dysfunction, membrane disruption, and DNA damage in bacteria, ultimately leading to bacterial death. AgNPs have also been found to alter the adhesion of bacterial cells to prevent biofilm formation. The benefits of using AgNPs in medicine are, to some extent, counter-weighted by their toxic effect on humans and the environment. In this review, we have compiled recent studies demonstrating the antibacterial activity of AgNPs, and we are discussing the known mechanisms of action of AgNPs against bacterial pathogens. Ongoing clinical trials involving AgNPs are briefly presented. A particular focus is placed on the mechanism of interaction of AgNPs with bacterial biofilms, which are a significant pathogenicity determinant. A brief overview of the use of AgNPs in other medical applications (e.g., diagnostics, promotion of wound healing) and the non-medical sectors is presented. Finally, current drawbacks and limitations of AgNPs use in medicine are discussed, and perspectives for the improved future use of functionalized AgNPs in medical applications are presented.

Polysaccharide-based antibacterial coating technologies.

To tackle antimicrobial resistance, a global threat identified by the United Nations, is a common cause of healthcare-associated infections (HAI) and is responsible for significant costs on healthcare systems, a substantial amount of research has been devoted to developing polysaccharide-based strategies that prevent bacterial attachment and biofilm formation on surfaces. Polysaccharides are essential building blocks for life and an abundant renewable resource that have attracted much attention due to their intrinsic remarkable biological potential antibacterial activities. If converted into efficient antibacterial coatings that could be applied to a broad range of surfaces and applications, polysaccharide-based coatings could have a significant potential global impact. However, the ultimate success of polysaccharide-based antibacterial materials will be determined by their potential for use in manufacturing processes that are scalable, versatile, and affordable. Therefore, in this review we focus on recent advances in polysaccharide-based antibacterial coatings from the perspective of fabrication methods. We first provide an overview of strategies for designing polysaccharide-based antimicrobial formulations and methods to assess the antibacterial properties of coatings. Recent advances on manufacturing polysaccharide-based coatings using some of the most common polysaccharides and fabrication methods are then detailed, followed by a critical comparative overview of associated challenges and opportunities for future developments. STATEMENT OF SIGNIFICANCE: Our review presents a timely perspective by being the first review in the field to focus on advances on polysaccharide-based antibacterial coatings from the perspective of fabrication methods along with an overview of strategies for designing polysaccharide-based antimicrobial formulations, methods to assess the antibacterial properties of coatings as well as a critical comparative overview of associated challenges and opportunities for future developments. Meanwhile this work is specifically targeted at an audience focused on featuring critical information and guidelines for developing polysaccharide-based coatings. Including such a complementary work in the journal could lead to further developments on polysaccharide antibacterial applications.