Relationship between oral microbiota and colorectal cancer: A systematic review.

This systematic review aims to investigate the microbial basis underlying the association between oral microbiota and colorectal cancer. A comprehensive search was conducted across four databases, encompassing potentially relevant studies published up to April 2024 related to the PECO question: "Is there a differentiation in oral microbial composition between adult patients diagnosed with colorectal cancer compared to healthy patients?". The Newcastle-Ottawa Scale was used to evaluate the quality of the studies included. The level of evidence was assessed through the GRADE (Grading of Recommendations, Assessment, Development and Evaluation) tool. Sixteen studies fulfilled the eligibility criteria. Based on low to moderate evidence profile, high levels of certain subspecies within Firmicutes (such as Streptococcus anginosus, Peptostreptococcus stomatis, S. koreensis, and S. gallolyticus), Prevotella intermedia, Fusobacterium nucleatum, and Neisseria oralis were found to be associated with colorectal cancer. Conversely, certain bacteria (e.g., Lachnospiraceae, F. periodonticum, and P. melaninogenica) could exert a symbiotic protective effect against colorectal cancer. Based on existing evidence, it appears that variations in oral microbiota composition exist among individuals with and without colorectal cancer. However, further research is necessary to determine the mechanisms of oral dysbiosis in colorectal carcinogenesis.

Relationship of ankyloglossia and obstructive sleep apnea: systematic review and meta-analysis.

PURPOSE: Recent studies have highlighted the potential role of a short lingual frenulum as a risk factor for pediatric obstructive sleep apnea syndrome. A shortened frenulum may contribute to abnormal orofacial development, leading to increased upper airway resistance and susceptibility to upper airway collapsibility during sleep. Recognizing early indicators, such as a short lingual frenulum, is crucial for prompt intervention. This systematic review aims to evaluate the association between a short lingual frenulum and the risk of obstructive sleep apnea syndrome in children. METHODS: This systematic review adheres to PRISMA criteria for a quantitative analysis. A comprehensive search was conducted on five databases until January 2024 to identify relevant studies. The selected articles underwent rigorous analysis, considering study design, sample characteristics, lingual frenulum characterization, sleep assessment methods, and key findings. RESULTS: A total of 239 references were initially identified. Finally, six studies were included in the qualitative synthesis, with four studies eligible for the quantitative synthesis. The Newcastle-Ottawa scale was employed to assess study quality. Meta-analysis, supported by a moderate evidence profile according to the GRADE scale, revealed statistically significant differences, with odds ratios of 3.051 (confidence interval: 1.939 to 4.801) for a short frenulum and 12.304 (confidence interval: 6.141 to 24.653) for a high-arched palate. CONCLUSION: This systematic review and meta-analysis provide evidence supporting the association between ankyloglossia and obstructive sleep apnea in children. Nevertheless, it is crucial to consider additional factors such as tongue mobility and the presence of a high-arched palate in further evaluations.

Volatile sulfur compounds in asthmatic children and adolescents: A cross-sectional study in breath and saliva.

BACKGROUND: Halitosis in children implies psychosocial repercussions. Risk factors associated with this condition are unclear, and detection methods are inaccurate. AIM: To quantify the levels of sulfur-like compounds in children with asthma and healthy children from a novel validated assay, and to establish the risk factors related to halitosis. DESIGN: One hundred and twenty-eight individuals (63 healthy and 65 asthmatic) from 3 to 17 years of age were tested using a passive colorimetric sensor to measure the levels of sulfur-like compounds in breath and saliva. Information was collected on oral hygiene habits, gingival and dental health, breathing type, and dental malocclusion. RESULTS: The mean values of hydrogen sulfide were 4.0 ± 6.8 and 19.7 ± 12.2 ppbv (parts per billion in volume) in the control and asthmatic groups, respectively (p < .001). The presence of higher concentrations of sulfur compounds was significantly associated (p < .05) with the presence of gingival inflammation, tongue coating, dental plaque, mouth breathing, hypomineralization, age, tongue brushing, and the use of dental floss. CONCLUSION: The level of sulfur in breath and saliva was significantly higher in patients with asthma. These results can serve as a precedent to raise awareness among paediatricians and parents about oral hygiene care in children and adolescents.

Effect of mouthwashes on the force decay of polymeric ligature chains used for dental purposes: a systematic review and meta-analysis.

BACKGROUND: External factors such as the daily use of antimicrobial mouthwashes to maintain oral hygiene and to reduce the microbial activity can contribute to alter the mechanical properties of the elastomeric chains used during orthodontic treatments, causing loss of effectiveness. This systematic review and a meta-analysis assessed the rate of force decay and degradation of the polymeric chains depending on the type of mouthwash. METHODS: A systematic search of the literature were there was an exposure of orthodontic elastomeric chains to certain mouthwashes was conducted in the electronic databases of PubMed, Cochrane Library (CENTRAL), Scopus, EMBASE and Web of Science, as well as grey literature (Opengrey). No limit was placed on publication year and research was done up to June 2022. Based on inclusion/ exclusion criteria, data were extracted by two independent reviewers. For the quantitative analysis, studies were analysed with a mixed-effect (random effect) meta-regression model, with beta coefficients and R [2] values. I [2] index and Q and Egger tests were used to find heterogeneity among studies. RESULTS: A total of 178 potentially eligible studies were identified, of which 14 were eventually included in the qualitative analysis and 14 in the quantitative meta-analysis. The meta-analysis showed that all the mouthwashes were associated with a greater force decay than the control groups. After 7 days (p = 0.005) significant differences were found among the different mouthwashes, with those containing alcohol having significantly higher impact on the force decay than those containing chlorhexidine 0.2%, sodium fluoride or Persica. However, at 24 h (p = 0.200), 14 days (p = 0.076), 21 days (p = 0.120) and 28 days (p = 0.778) no statistically significant differences among the different mouthwashes were found, although those containing alcohol presented a strong tendency. CONCLUSION: Although mouthwashes tend to increase the speed of force decay of elastomeric chains, especially those containing alcohol, clorhexidine 0.2% can be a good alternative due to its low impact on the force decay and its ability to maintain low microbial activity. More in vitro and in vivo studies comparing different manufacturers and other agents should be performed.

Unplanned molar intrusion after Invisalign treatment.

INTRODUCTION: The objectives of this study were to analyze and quantify molar intrusion after the use of clear aligners and to analyze the relationship with other variables such as age, duration of treatment, and a series of cephalometric osseous and dental measurements at the start of treatment. METHODS: A retrospective descriptive-analytical study was designed with a sample of 58 patients aged 18-60 years who had undergone treatment with Invisalign. The cephalometric measurements were carried out after lateral x-rays were taken of the cranium; these were compared at the start (T0) and conclusion of treatment. Parametric and nonparametric tests were used to compare means, whereas Pearson correlations and multivariate lineal regression analyses were used to establish the variables associated with molar intrusion. RESULTS: Approximately 74.2% of the patients presented some degree of molar intrusion after treatment. Furthermore, 32.8% of patients presented intrusion only at the mandibular molar, whereas 25.9% experienced intrusion at both molars, maxillary and mandibular, simultaneously. However, 15.5% presented intrusion only at the maxillary molar. The average magnitude of intrusion here was 0.98 ± 0.54 mm, whereas the mandibular molar was 0.84 ± 0.29 mm. Statistically significant reductions exist for the distance L6_MP and U6_SN between T0 and at conclusion of treatment. Maxillary molar intrusion correlates negatively with mandibular molar intrusion (r = -0.270). The number of days of treatment did not correlate with either maxillary or mandibular molar intrusion. CONCLUSIONS: Clear aligners give rise to molar intrusion in 74.2% of patients. The cephalometric variables L6_MP T0, mandibular plane angle T0, and facial axis T0 were negatively and significantly associated with maxillary molar intrusion, whereas age and facial axis T0 were negatively associated with mandibular molar intrusion allowing smaller magnitudes of intrusion to be predicted when these variables present high values at T0.

Effectiveness of removable appliances with temperature sensors in orthodontic patients: a systematic review and meta-analysis.

BACKGROUND/OBJECTIVE: Patient compliance during orthodontic treatment is one of the factors that most affects success in the final result. The use of removable appliances is frequent at an early age and the monitoring of its use is essential to assess the collaboration of the patient. The aim of this study was to establish the effectiveness of microsensors included in removable appliances during orthodontic treatment or in the retention phase to enable a reliable and individualized follow-up of the patient. SEARCH METHODS: The article search was carried out in various electronic databases and journals without any language restrictions. SELECTION CRITERIA: Studies using microsensors into removable appliances were selected with the key selection criterion of a minimum follow-up of 4 weeks. DATA COLLECTION AND ANALYSIS: The quality of the studies included was evaluated using the Cochrane scale for the randomized controlled trials and the Newcastle Ottawa Scale for control-case, cohort, and transversal studies. The mean of the differences with a 95% confidence interval was expressed for the continuous data. RESULTS: Twenty-nine full-text articles were analysed and included in the qualitative synthesis. In general, the mean daily wear time of removable appliances measured objectively was less than the time that the professional had predetermined. CONCLUSIONS: The use of microsensors as an objective measurement method enhances communication and boosts confidence in the orthodontist-patient relationship. More random clinical studies with temperature sensors are needed to establish to what extent they influence the orthodontic outcome. REGISTRATION: PROSPERO (CRD42019120525).

Nonsurgical treatment of an adult with skeletal Class III malocclusion, anterior crossbite, and an impacted canine.

Class III malocclusion presents some complexity in terms of diagnosis and treatment and affects not only the jaws but the whole craniofacial complex. Besides, functional forward displacement of the mandible may be diagnosed in a patient presenting Class III malocclusion, as the 2 entities are not incompatible or mutually exclusive. This case report describes the multidisciplinary, nonsurgical, orthodontic treatment of an adult patient with a skeletal Class III malocclusion, anterior crossbite, and a palatally impacted canine, treated with fixed appliances and skeletal anchorage. To upright the mandibular molars, distalize the whole mandibular arch, and avoid excessive inclination of maxillary incisors to improve dentofacial esthetics, miniscrews were placed in the retromolar area. The treatment results were very satisfactory and remained stable after a reasonable retention period.

Comparative Study of Oral Health-Related Quality of Life (OHRQL) between Different Types of Orthodontic Treatment.

Background and objectives: Although the main objective of any orthodontic treatment is to correct malocclusion, a range of psychosocial and/or esthetic factors drive patients to undergo orthodontic treatment. The aim of the present study was to analyze variations in oral health-related quality of life (OHRQL) levels in patients undergoing orthodontic treatment by means of four types of appliances: fixed buccal metal brackets, fixed buccal esthetic/ceramic brackets, fixed lingual brackets, and clear aligners. Material and Methods: The study sample comprised 120 patients aged 18 to 68 years who attended the Orthodontic department at the Dental Clinic of the University of Valencia. The Index of Orthodontic Treatment Need (IOTN) was used to measure orthodontic treatment need. Each patient completed three different intervals of the 14-item Oral Health Impact Profile (OHIP-14): before treatment (T0); six months after placing the orthodontic appliances (T1) and at the end of orthodontic treatment (T2). Results: All groups suffered a reduction in quality of life from T0 to T1 except the metal bracket group which presented the same level for the functional limitation domain (p = 1.000), the lingual bracket group for the psychological discomfort domain (p = 1.000) and clear aligner group for the physical disability domain (p = 0.118) and psychological disability domain (p = 1.000). Nevertheless, quality of life for most domains was similar in all groups at the end of treatment (T2). Conclusions: Patients underwent a significant reduction in quality of life during treatment in comparison with their pre-treatment condition but showed significant improvements at the end of treatment.

Miniscrew mechanics for molar distalization and incisor intrusion in a patient with a Class II brachyfacial pattern and gummy smile.

A gummy smile is one of the most problematic characteristics in patients with a Class II Division 2 malocclusion, and the correction of vertical position and incisor torque is often challenging for the orthodontist. This case report describes the orthodontic treatment of a 31-year-old woman, assisted by miniscrew mechanics for maxillary arch distalization and correction of a gummy smile with a brachyfacial pattern. Two different mechanics were used. Miniscrews were placed in both maxillary tuberosities, and the maxillary arch was successfully distalized, correcting the Class II relationship. Interradicular miniscrews were placed for maxillary and mandibular incisor intrusion to correct the gummy smile, overbite, and torque. Finally, periodontal surgery was performed to lengthen the maxillary incisor crowns. Satisfactory smile esthetics and good occlusion were achieved. Follow-up after 24 months confirmed that the outcome was stable.

Antibacterial Properties of Nanoparticles in Dental Restorative Materials. A Systematic Review and Meta-Analysis.

Background and Objectives: Nanotechnology has become a significant area of research focused mainly on increasing the antibacterial and mechanical properties of dental materials. The aim of the present systematic review and meta-analysis was to examine and quantitatively analyze the current evidence for the addition of different nanoparticles into dental restorative materials, to determine whether their incorporation increases the antibacterial/antimicrobial properties of the materials. Materials and Methods: A literature search was performed in the Pubmed, Scopus, and Embase databases, up to December 2018, following PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines for systematic reviews and meta-analyses. Results: A total of 624 papers were identified in the initial search. After screening the texts and applying inclusion criteria, only 11 of these were selected for quantitative analysis. The incorporation of nanoparticles led to a significant increase (p-value <0.01) in the antibacterial capacity of all the dental materials synthesized in comparison with control materials. Conclusions: The incorporation of nanoparticles into dental restorative materials was a favorable option; the antibacterial activity of nanoparticle-modified dental materials was significantly higher compared with the original unmodified materials, TiO2 nanoparticles providing the greatest benefits. However, the high heterogeneity among the articles reviewed points to the need for further research and the application of standardized research protocols.

Femtosecond laser settings for optimal bracket bonding to zirconia.

Bonding orthodontic brackets to ceramic materials is a challenging procedure; femtosecond (FS) laser conditioning could provide improved results, but the ideal settings for effective bracket-zirconia bonding have never been established. This study aimed to analyze the differences in surface roughness and shear bond strength (SBS) produced by different femtosecond laser settings and establish a protocol to prepare zirconia surfaces for optimal adhesion to metal orthodontic brackets. One hundred eighty zirconia samples were assigned to six groups according to surface treatment: (1) control; (2) air-particle abrasion (APA); (3) FS laser irradiation (300 mW output power, 60 µm inter-groove distance); (4) FS laser irradiation (200 mW, 100 µm); (5) FS laser irradiation (40 mW, 60 µm); and (6) FS laser irradiation (200 mW, 60 µm). Surface roughness was measured. Orthodontic brackets were bonded to the zirconia specimens, and SBS was measured. SBS in groups 3 and 6 was significantly higher than the other groups (5.92 ± 1.12 MPa and 5.68 ± 0.94 MPa). No significant differences were found between groups 1, 2, 4, and 5 (3.87 ± 0.77 MPa, 4.25 ± 0.51 MPa, 3.74 ± 0.10 MPa, and 3.91 ± 0.53 MPa). Surface roughness was significantly greater for FS laser than for control and APA groups (p = 1.28 × 10-8). FS laser at 200 mW, 60 µm can be recommended as the ideal settings for treating zirconia surfaces, producing good SBS and more economical energy use.

Current trends in orthodontic journals listed in Journal Citation Reports. A bibliometric study.

INTRODUCTION: The aim of this study is to analyze articles published in orthodontic journals included in Journal Citation Reports (JCR) to determine current trends in orthodontic publishing. METHODS: Articles included in orthodontic journals in 2016 JCR and published during 2007-2017 were selected. After applying inclusion criteria, author-based parameters (article title, first author's name, institution and sex, number of authors, number of affiliations, first author's origin, and geographic origin), article-based parameters (article type, main topic, and research design), and the number of cites and self-cites were registered for each article. RESULTS: A total of 7119 articles were analyzed, and 842 different centers and 4483 different authors were identified. The percentage of female authors showed a tendency to increase over the decade; the most productive country was the United States (17.4%). Bone anchorage was the most recurrent topic (7.2%). More than three-fourths of articles (80.8%) proceeded from orthodontic departments belonging to public institutions, with a decreasing trend in nonacademic or private affiliations. Positive and negative correlations were found to exist between citation counts and other variables. CONCLUSIONS: American Journal of Orthodontics and Dentofacial Orthopedics, Angle Orthodontist, and European Journal of Orthodontics were the 3 main journals with regard to production volume, with the United States being the most productive country. The most recurrent topic was bone anchorage, and most of the studies were research articles with observational cross-sectional design. Study design, geographic origin of the articles, article type, and the main subject of the article may be predictive of citation numbers.

Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis.

Background and Objectives: The aim of this systematic review was to examine the effect of 2% chlorhexidine following acid etching on the microtensile bond strength of resin restorations for different follow-up times. Materials and Methods: A thorough search of PubMed, Scopus, and Embase databases were conducted. In vitro experimental studies or in vivo studies published up to December 2018 with an experimental group treated with a 2% chlorhexidine solution following acid etching and a control group were included, wherein the final restoration used a resin composite in both the groups. Results: Twenty-one articles were identified for qualitative analysis and 18 for meta-analysis. The difference in the means of microtensile bond strength between the two groups was calculated for the different follow-up times. The differences were significant for 6 months (4.30 MPa; 95% CI 2.72-5.89), 12 months (8.41 MPa; 95% CI 4.93-11.88), and 2-5 years including aged and thermocycling samples (9.08 MPa; 95% CI 5.36-12.81). There were no significant differences for the type of adhesive used. A meta-regression model showed a significant effect of time on the microtensile bond strength. Conclusions: The application of a 2% chlorhexidine solution after acid etching increased the microtensile bond strength significantly for follow-up times of 6 months or more. The adhesive type had no influence.

Tooth agenesis code (TAC) in complete unilateral and bilateral cleft lip and palate patients.

The objective of this study is to characterize and compare tooth agenesis codes and their prevalence in a population of Spanish patients with unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP), and to determine if the extent of the cleft (BCLP or UCLP) was associated with the number of absent teeth. This retrospective cross-sectional human study included 118 patients with complete BCLP (29) or UCLP (89) and permanent dentition from first molar to first molar. Congenitally missing teeth were identified on panoramic radiographs using the tooth agenesis code (TAC) to identify agenesis codes. Agenesis prevalence was 50.6 and 51.7% for UCLP and BCLP patients, respectively. The lateral upper incisor was the most frequently absent tooth, especially in the cleft quadrant. Numbers of absent teeth ranged from 1 to 6. This study represents a different approach from previous agenesis investigations in cleft patients. These Spanish patients showed a high number of ageneses, presenting nineteen different tooth agenesis codes. A total of five TACs were unique, in other words, observed in a single patient in the sample. No statistically significant relationship was found between the extent of the cleft and the number of absent teeth. The TAC system makes it possible to identify agenesis codes with simultaneous absence of teeth not detected in general prevalence studies.

Miniscrew-assisted multidisciplinary orthodontic treatment with surgical mandibular advancement and genioplasty in a brachyfacial Class II patient with mandibular asymmetry.

This article describes the complex dental treatment of a 43-year-old man with skeletal Class II, mandibular asymmetry, severe brachyfacial pattern, Class II Division 2, canting of the occlusal plane, and an increased curve of Spee. To achieve optimal results, we adopted a multidisciplinary approach to treatment, involving periodontics, oral surgery, orthodontics, maxillofacial surgery, and prosthetics specialists. After periodontal treatment, miniscrews were placed to correct the occlusal plane canting and the excessive curve of Spee with orthodontic treatment. The surgical treatment plan consisted of a bilateral asymmetric sagittal split osteotomy for mandibular advancement and genioplasty. The patient had an infection after the surgery at the site of the right fixation plate, so the plate was removed, and active orthodontic treatment was continued and finished. Mandibular first molar implants and maxillary ceramic crowns using the Digital Smile Design method (Digital Smile Design, Doral, FL) were placed at the end of orthodontic treatment. The patient was satisfied with the treatment results and with his facial and dental appearance, as well as his oral function. The 2-year follow-up pictures show a stable result both esthetically and functionally.

Comparative evaluation of two cetylpyridinium chloride-based mouthwashes on the mechanical properties and strength loss of elastomeric chains used in dentistry: An vitro study.

Objectives: Evaluate the strength degradation of polymeric ligature chains after their immersion in cetylpyridinium chloride-based mouthwashes. Methods: 240 elastomeric samples from four different manufacturers (Rocky Mountain®, Ormco®, Morelli® and Dentaurum®) in two types of configurations (with and without intermodular links) and divided in 3 groups (distilled water, Vitis CPC Protect® and PERIO·AID® 0.05%) at 5 follow-up periods (0-24 h, 7-14 -21 days) were immersed twice a day for 60 s, following the manufacturers' protocols. A universal traction machine was used to perform the measurements and a post hoc multiple comparisons were based on the Bonferroni test and extended to a 3-way ANOVA test (α = 0.05). Results: There was a drop in strength up to 35.9% at 24 h. After a week, the short chains (52%) degraded less than the long ones (57.3%) with significant differences (p < 0.001) and the same pattern was observed until 21 days (p < 0.001). At 24 h, the degradation of the chains exposed in distilled water was 25.8%, in VITIS CPC Protect® 28.6% and in PERIO· AID® 0.05%, 27% with significant differences (p < 0.001). At 21 days, the VITIS CPC Protect® group obtained a much greater loss of strength, being this drop statistically significant (p < 0.001). The chains from Ormco® and RMO® experienced the least loss of force when immersed in the control group or PERIO AID® 0 0.05% (48% and 51%), while Dentaurum's in VITIS CPC Protect® lost more than 75%. Conclusions: The orthodontic elastomeric chains suffer a sharp drop in strength during the first days of treatment. When comparing the mouthwashes, there were statistically significant differences in terms of strength degradation. Clinical significance: Based on the results, some types of chains, such as the ones without intermodular links from Ormco® showed better properties throughout the study. When immersed in PERIO·AID®0.05%, all showed significantly better results over time. Thus, PERIO·AID®0.05% can be recommended as a complementary oral hygiene element in dental treatments when elastomeric chains are used.

Is the quality of the orthodontic information in social media platforms reliable?: A systematic review.

BACKGROUND: Social networks have become a widely used and accessible source of health-related information for patients, but this material is not always accurate or appropriate. The purpose of this study was to evaluate the quality of orthodontic information available on 2 of the most popular social media platforms. STUDIES REVIEWED: The authors conducted a systematic search of the literature that analyzed the quality of information regarding orthodontics on social networks and used recognized quality-evaluation methods, such as DISCERN, modified DISCERN, and the Quality Global Scale or the Video Information Quality Index, in the electronic databases of PubMed, Embase, and Scopus and through a manual search of gray literature. RESULTS: The authors identified a total of 534 potentially eligible articles, of which 22 eventually were included in the qualitative analysis. The application of the scales revealed that most of the content was of insufficient quality and lacked scientific rigor, precision, and support from reliable sources. The authors observed marked heterogeneity in the nature of the publications analyzed, with the most recurrent topics being general orthodontic treatment and the use of clear aligners. PRACTICAL IMPLICATIONS: Social media platforms provide low-quality information to patients, which potentially can be harmful. These findings underscore the need to offer alternative ways to resolve patient queries before and during treatment and highlight the importance of promoting informed and responsible education regarding online information on orthodontic treatments.

Diagnostic Methods for the Prenatal Detection of Cleft Lip and Palate: A Systematic Review.

Background: Accurate prenatal diagnosis of cleft lip and palate is essential to discuss severity prediction, perform appropriate parental counseling, and, at last, establish long-term treatment planning. The aim of this systematic review was to analyze the accuracy of various imaging techniques for the prenatal diagnosis of cleft lip and palate, assess the pregnancy phase for orofacial clefts diagnosis, and study the different cleft types in terms of diagnostic methods, timing, and predictability. Methods: A search of the PubMed, EMBASE, Scopus, and Web of Science databases was conducted to identify potentially relevant studies published until January 2024. The quality of the selected articles was assessed using the Newcastle-Ottawa scale for methodological quality assessment of cohort studies and the QUADAS-2 scale for diagnostic test studies. Results: A total of 18 studies met the eligibility criteria and were included in the review. The findings of this review indicate that the majority of studies showed improved diagnostic accuracy when supplementary techniques, such as 3D ultrasound or magnetic resonance imaging, were added to 2D ultrasound. Conclusions: The implementation of magnetic resonance imaging as a standard procedure could significantly improve the precision of diagnosing cleft lip and palate. Therefore, the diagnostic technique used will play a crucial role in the accuracy of the diagnosis.

Biological significance of long-term bisphenol A release in the saliva of patients wearing orthodontic appliances: A systematic review and meta-analysis.

Background: Orthodontic appliances contain Bisphenol A and are controversial due to its potential risks for human health. Thus, the aim of the present research was to identify the presence of Bisphenol A in the saliva of patients wearing orthodontic appliances. Material and Methods: A systematic search of the literature was conducted in four electronic databases (PubMed, Embase, Scopus, and Web of Science) and a manual search of grey literature. Research was done up to March 2023, without language restrictions. Based on inclusion/exclusion criteria, data were extracted by two independent reviewers. Results: A total of 2293 potentially eligible articles were identified, of which 8 were finally included. The studies included a total of 238 patients and showed a moderate quality in the PEDro scale. All the devices studied released Bisphenol A into the saliva, with the polycarbonate brackets being the ones that released it for a longer time. The most significant increase occurred in the first 30 minutes after bonding with composites, reaching 697 µg/g. with polycarbonate brackets. Conclusions: Although a statistically significant increase of Bisphenol A levels in the saliva of orthodontic patients were found, this increase does not exceed the maximum allowable daily intake. Thus, the use of these materials can be considered safe for human health. Key words:BPA, Bisphenol-A, cytotoxicity, Orthodontic materials, Composite resins.

Nonsurgical treatment of an adult with skeletal Class III malocclusion, posterior crossbite and mandibular asymmetry.

Class III malocclusion represents a very heterogeneous clinical condition that is characterized by the combination of a wide variety of skeletal and/or dental components. Given the wide diversity, diagnosis and treatment of such malocclusion has always been a challenge for clinicians. Despite the different treatment options available, the treatment approach in the adult patient must depend fundamentally on the patient's decision, guided by the orthodontist and the maxillofacial surgeon. This case report presents the treatment of a patient with Class III malocclusion, with posterior crossbite and anterior edge-to-edge bite with fixed appliances and skeletal anchorage, an interdisciplinary, nonsurgical approach for a skeletal malocclusion. Firstly, to improve the posterior transverse relationship a band-soldered compressed lingual arch was cemented to the mandibular first molars. Then, once a correct transverse relationship was achieved, two miniscrews were placed distal to the mandibular second molars to distalize the whole mandibular arch, and avoid excessive inclination of maxillary incisors to improve dentofacial esthetics. At the end of the treatment, all the objectives planned at the beginning had been achieved and remained stable after the retention period. Key words:Clase III, orthodontic treatment, distalizing, appliances, posterior crossbite.