Deciphering Anion-Modulated Solvation Structure for Calcium Intercalation into Graphite for Ca-Ion Batteries.

Co-intercalation reactions make graphite a feasible anode in Ca ion batteries, yet the correlation between Ca ion intercalation behaviors and electrolyte structure remains unclear. This study, for the first time, elucidates the pivotal role of anions in modulating the Ca ion solvation structures and their subsequent intercalation into graphite. Specifically, the electrostatic interactions between Ca ion and anions govern the configurations of solvated-Ca-ion in dimethylacetamide-based electrolytes and graphite intercalation compounds. Among the anions considered (BH4 -, ClO4 -, TFSI- and [B(hfip)4]-), the coordination of four solvent molecules per Ca ion (CN=4) leads to the highest reversible capacities and the fastest reaction kinetics in graphite. Our study illuminates the origins of the distinct Ca ion intercalation behaviors across various anion-modulated electrolytes, employing a blend of experimental and theoretical approaches. Importantly, the practical viability of graphite anodes in Ca-ion full cells is confirmed, showing significant promise for advanced energy storage systems.

Nanoscale Phenomena in Lithium-Ion Batteries.

The electrochemical properties and performances of lithium-ion batteries are primarily governed by their constituent electrode materials, whose intrinsic thermodynamic and kinetic properties are understood as the determining factor. As a part of complementing the intrinsic material properties, the strategy of nanosizing has been widely applied to electrodes to improve battery performance. It has been revealed that this not only improves the kinetics of the electrode materials but is also capable of regulating their thermodynamic properties, taking advantage of nanoscale phenomena regarding the changes in redox potential, solid-state solubility of the intercalation compounds, and reaction paths. In addition, the nanosizing of materials has recently enabled the discovery of new energy storage mechanisms, through which unexplored classes of electrodes could be introduced. Herein, we review the nanoscale phenomena discovered or exploited in lithium-ion battery chemistry thus far and discuss their potential implications, providing opportunities to further unveil uncharted electrode materials and chemistries. Finally, we discuss the limitations of the nanoscale phenomena presently employed in battery applications and suggest strategies to overcome these limitations.

Concurrent and Selective Determination of Dopamine and Serotonin with Flexible WS2 /Graphene/Polyimide Electrode Using Cold Plasma.

Makers of point-of-care devices and wearable diagnostics prefer flexible electrodes over conventional electrodes. In this study, a flexible electrode platform is introduced with a WS2 /graphene heterostructure on polyimide (WGP) for the concurrent and selective determination of dopamine and serotonin. The WGP is fabricated directly via plasma-enhanced chemical vapor deposition (PECVD) at 150 °C on a flexible polyimide substrate. Owing to the limitations of existing fabrication methods from physical transfer or hydrothermal methods, many studies are not conducted despite excellent graphene-based heterostructures. The PECVD synthesis method can provide an innovative WS2 /graphene heterostructure of uniform quality and sufficient size (4 in.). This unique heterostructure affords excellent electrical conductivity in graphene and numerous electrochemically active sites in WS2 . A large number of uniform qualities of WGP electrodes show reproducible and highly sensitive electrochemical results. The synergistic effect enabled well-separated voltammetric signals for dopamine and serotonin with a potential gap of 188 mV. Moreover, the practical application of the flexible sensor is successfully evaluated by using artificial cerebrospinal fluid.

Flexible MoS2-Polyimide Electrode for Electrochemical Biosensors and Their Applications for the Highly Sensitive Quantification of Endocrine Hormones: PTH, T3, and T4.

Flexibile biosensors have a lot of applications in measuring the concentration of target bioanalytes. In combination with its flexibility, electrochemical sensors containing 2D materials have particular advantages such as enlarged area compatibility, transparency, and high scalability. A flexible biosensor was fabricated by direct synthesis of molybdenum disulfide (MoS2) on a polyimide (PI) substrate, which can be used as the working electrode in electrochemistry platforms. The direct formation of 2D-MoS2 on the PI was achieved using plasma-enhanced chemical vapor deposition (PE-CVD). Since the MoS2 provides higher electrical conductivity, the MoS2-Au-PI flexible sensor is able to provide highly sensitive detection of target proteins with a relatively fast response via cyclic voltammetry. To evaluate the high performance of the fabricated sensor, we selected the endocrine-related hormones parathyroid hormone (PTH), triiodothyronine (T3), and thyroxine (T4) as analytes because they are one of the most important markers for the determination of endocrinopathy, however, they are very difficult to quantify. The newly developed biosensor achieved highly sensitive detection of the hormones and could determine their location with high accuracy. In addition, we performed electrochemical measurements of hormones obtained from 30 clinical patients' sera with confirmed agreement and compared with the measurements performed with standard immunoassay equipment (E 170, Roche Diagnostics, Germany).

Odor coding of nestmate recognition in the eusocial ant Camponotus floridanus.

In eusocial ants, aggressive behaviors require the ability to discriminate between chemical signatures such as cuticular hydrocarbons that distinguish nestmate friends from non-nestmate foes. It has been suggested that a mismatch between a chemical signature (label) and the internal, neuronal representation of the colony odor (template) leads to aggression between non-nestmates. Moreover, a definitive demonstration that odorant receptors are responsible for the processing of the chemical signals that regulate nestmate recognition has thus far been lacking. To address these issues, we have developed an aggression-based bioassay incorporating highly selective modulators that target odorant receptor functionality to characterize their role in nestmate recognition in the formicine ant Camponotus floridanus Electrophysiological studies were used to show that exposure to either a volatilized antagonist or an agonist eliminated or dramatically altered signaling, respectively. Administration of these compounds to adult workers significantly reduced aggression between non-nestmates without altering aggression levels between nestmates. These studies provide direct evidence that odorant receptors are indeed necessary and sufficient for mediating aggression towards non-nestmates. Furthermore, our observations support a hypothesis in which rejection of non-nestmates depends on the precise decoding of chemical signatures present on non-nestmates as opposed to the absence of any information or the active acceptance of familiar signatures.

Superior rechargeability and efficiency of lithium-oxygen batteries: hierarchical air electrode architecture combined with a soluble catalyst.

The lithium-oxygen battery has the potential to deliver extremely high energy densities; however, the practical use of Li-O2 batteries has been restricted because of their poor cyclability and low energy efficiency. In this work, we report a novel Li-O2 battery with high reversibility and good energy efficiency using a soluble catalyst combined with a hierarchical nanoporous air electrode. Through the porous three-dimensional network of the air electrode, not only lithium ions and oxygen but also soluble catalysts can be rapidly transported, enabling ultra-efficient electrode reactions and significantly enhanced catalytic activity. The novel Li-O2 battery, combining an ideal air electrode and a soluble catalyst, can deliver a high reversible capacity (1000 mAh g(-1) ) up to 900 cycles with reduced polarization (about 0.25 V).

Re-evaluation of battery-grade lithium purity toward sustainable batteries.

Recently, the cost of lithium-ion batteries has risen as the price of lithium raw materials has soared and fluctuated. Notably, the highest cost of lithium production comes from the impurity elimination process to satisfy the battery-grade purity of over 99.5%. Consequently, re-evaluating the impact of purity becomes imperative for affordable lithium-ion batteries. In this study, we unveil that a 1% Mg impurity in the lithium precursor proves beneficial for both the lithium production process and the electrochemical performance of resulting cathodes. This is attributed to the increased nucleation seeds and unexpected site-selective doping effects. Moreover, when extended to an industrial scale, low-grade lithium is found to reduce production costs and CO2 emissions by up to 19.4% and 9.0%, respectively. This work offers valuable insights into the genuine sustainability of lithium-ion batteries.

Comparison Study of a Thermal-Driven Microstructure in a High-Ni Cathode for Lithium-Ion Batteries: Critical Calcination Temperature for Polycrystalline and Single-Crystalline Design.

High-Ni layered oxide cathodes are promising candidates for lithium-ion batteries due to their high energy density. However, their cycle stability is compromised by the poor mechanical durability of the particle microstructure. In this study, we investigate the impact of the calcination temperature on microstructural changes, including primary particle growth and pore evolution, using LiNi0.88Mn0.08Co0.04O2 (N884), with an emphasis on the critical calcination temperature for polycrystalline and single-crystal designs in high-Ni cathodes. As the calcination temperature increases, the primary particles undergo a rectangular growth pattern while the pore population decreases. Beyond a certain critical temperature (in this case, 850 °C), a sudden increase in primary particle size and a simultaneous rapid reduction in the pore population are observed. This sudden microstructure evolution leads to poor cycle retention in N884. In contrast, single-crystal particles, free of grain boundaries, synthesized at this critical temperature exhibit superior cycle retention, underscoring the significance of microstructural design over crystalline quality for achieving long-term cyclability. Our study sheds light on the interplay between calcination temperature and microstructural evolution, proposing the critical temperature as a key criterion for single-crystal synthesis.

Toward a lithium-"air" battery: the effect of CO2 on the chemistry of a lithium-oxygen cell.

Lithium-oxygen chemistry offers the highest energy density for a rechargeable system as a "lithium-air battery". Most studies of lithium-air batteries have focused on demonstrating battery operations in pure oxygen conditions; such a battery should technically be described as a "lithium-dioxygen battery". Consequently, the next step for the lithium-"air" battery is to understand how the reaction chemistry is affected by the constituents of ambient air. Among the components of air, CO2 is of particular interest because of its high solubility in organic solvents and it can react actively with O2(-•), which is the key intermediate species in Li-O2 battery reactions. In this work, we investigated the reaction mechanisms in the Li-O2/CO2 cell under various electrolyte conditions using quantum mechanical simulations combined with experimental verification. Our most important finding is that the subtle balance among various reaction pathways influencing the potential energy surfaces can be modified by the electrolyte solvation effect. Thus, a low dielectric electrolyte tends to primarily form Li2O2, while a high dielectric electrolyte is effective in electrochemically activating CO2, yielding only Li2CO3. Most surprisingly, we further discovered that a high dielectric medium such as DMSO can result in the reversible reaction of Li2CO3 over multiple cycles. We believe that the current mechanistic understanding of the chemistry of CO2 in a Li-air cell and the interplay of CO2 with electrolyte solvation will provide an important guideline for developing Li-air batteries. Furthermore, the possibility for a rechargeable Li-O2/CO2 battery based on Li2CO3 may have merits in enhancing cyclability by minimizing side reactions.

Enhanced LiMn2O4 Thin-Film Electrode Stability in Ionic Liquid Electrolyte: A Pathway to Suppress Mn Dissolution.

Spinel-type lithium manganese oxide (LiMn2O4) cathodes suffer from severe manganese dissolution in the electrolyte, compromising the cyclic stability of LMO-based Li-ion batteries (LIBs). In addition to causing structural and morphological deterioration to the cathode, dissolved Mn ions can migrate through the electrolyte to deposit on the anode, accelerating capacity fade. Here, we examine single-crystal epitaxial LiMn2O4 (111) thin-films using synchrotron in situ X-ray diffraction and reflectivity to study the structural and interfacial evolution during cycling. Cyclic voltammetry is performed in a wide range (2.5-4.3 V vs Li/Li+) to promote Mn3+ formation, which enhances dissolution, for two different electrolyte systems: an imidazolium ionic liquid containing lithium bis-(trifluoromethylsulfonyl)imide (LiTFSI) and a conventional carbonate liquid electrolyte containing lithium hexafluorophosphate (LiPF6). We find exceptional stability in this voltage range for the ionic liquid electrolyte compared to the conventional electrolyte, which is attributed to the absence of Mn dissolution in the ionic liquid. X-ray reflectivity shows a negligible loss of cathode material for the films cycled in the ionic liquid electrolyte, further confirmed by inductively coupled plasma mass spectrometry and transmission electron microscopy. Conversely, a substantial loss of Mn is found when the film is cycled in the conventional electrolyte. These findings show the significant advantages of ionic liquids in suppressing Mn dissolution in LiMn2O4 LIB cathodes.

A comparative study on Na2MnPO4F and Li2MnPO4F for rechargeable battery cathodes.

Electrochemical properties of A(2)MnPO(4)F (A = Na/Li) were investigated both experimentally and with first principles calculations. A new Li(2)MnPO(4)F phase was successfully synthesized for the first time. A one alkali metal ion reaction occurred reversibly within a reasonable voltage window and a two alkali metal ion reaction took place at higher voltages.

Elucidating and Mitigating High-Voltage Degradation Cascades in Cobalt-Free LiNiO2 Lithium-Ion Battery Cathodes.

LiNiO2 (LNO) is a promising cathode material for next-generation Li-ion batteries due to its exceptionally high capacity and cobalt-free composition that enables more sustainable and ethical large-scale manufacturing. However, its poor cycle life at high operating voltages over 4.1 V impedes its practical use, thus motivating efforts to elucidate and mitigate LiNiO2 degradation mechanisms at high states of charge. Here, a multiscale exploration of high-voltage degradation cascades associated with oxygen stacking chemistry in cobalt-free LiNiO2 , is presented. Lattice oxygen loss is found to play a critical role in the local O3-O1 stacking transition at high states of charge, which subsequently leads to Ni-ion migration and irreversible stacking faults during cycling. This undesirable atomic-scale structural evolution accelerates microscale electrochemical creep, cracking, and even bending of layers, ultimately resulting in macroscopic mechanical degradation of LNO particles. By employing a graphene-based hermetic surface coating, oxygen loss is attenuated in LNO at high states of charge, which suppresses the initiation of the degradation cascade and thus substantially improves the high-voltage capacity retention of LNO. Overall, this study provides mechanistic insight into the high-voltage degradation of LNO, which will inform ongoing efforts to employ cobalt-free cathodes in Li-ion battery technology.

Respiratory virus surveillance in Canada during the COVID-19 pandemic: An epidemiological analysis of the effectiveness of pandemic-related public health measures in reducing seasonal respiratory viruses test positivity.

BACKGROUND: Various public health measures have been implemented globally to counter the coronavirus disease 2019 (COVID-19) pandemic. The purpose of this study was to evaluate respiratory virus surveillance data to determine the effectiveness of such interventions in reducing transmission of seasonal respiratory viruses. METHOD: We retrospectively analysed data from the Respiratory Virus Detection Surveillance System in Canada, before and during the COVID-19 pandemic, by interrupted time series regression. RESULTS: The national level of infection with seasonal respiratory viruses, which generally does not necessitate quarantine or contact screening, was greatly reduced after Canada imposed physical distancing and other quarantine measures. The 2019-2020 influenza season ended earlier than it did in the previous year. The influenza virus was replaced by rhinovirus/enterovirus or parainfluenza virus in the previous year, with the overall test positivity remaining at approximately 35%. However, during the 2019-2020 post-influenza period, the overall test positivity of respiratory viruses during the COVID-19 was still low (7.2%). Moreover, the 2020-2021 influenza season had not occurred by the end of February 2021. CONCLUSION: Respiratory virus surveillance data may provide real-world evidence of the effectiveness of implemented public health interventions during the current and future pandemics.

Realization of Wafer-Scale 1T-MoS2 Film for Efficient Hydrogen Evolution Reaction.

The octahedral structure of 2D molybdenum disulfide (1T-MoS2 ) has attracted attention as a high-efficiency and low-cost electrocatalyst for hydrogen production. However, the large-scale synthesis of 1T-MoS2 films has not been realized because of higher formation energy compared to that of the trigonal prismatic phase (2H)-MoS2 . In this study, a uniform wafer-scale synthesis of the metastable 1T-MoS2 film is performed by sulfidation of the Mo metal layer using a plasma-enhanced chemical vapor deposition (PE-CVD) system. Thus, plasma-containing highly reactive ions and radicals of the sulfurization precursor enable the synthesis of 1T-MoS2 at 150 °C. Electrochemical analysis of 1T-MoS2 shows enhanced catalytic activity for the hydrogen evolution reaction (HER) compared to that of previously reported MoS2 electrocatalysts 1T-MoS2 does not transform into stable 2H-MoS2 even after 1000 cycles of HER. The proposed low-temperature synthesis approach may offer a promising solution for the facile production of various metastable-phase 2D materials.

n-Doping of Quantum Dots by Lithium Ion Intercalation.

The optical properties of colloidal quantum dots (QDs) are controllable through introduction of excess electrons or holes into their delocalized bands. Crucial to robust and energy-efficient electronic doping of QDs is suitable charge compensation. Compensation by surface modification and substitutional impurities are however not sufficiently controllable to enable effective doping of QDs. This article describes electrochemical n-type doping of CdSe QDs where injected electrons are compensated by interstitial Li+ to form LixCdSe, x ≤ 0.3. n-type degenerate doping reversibly decreases absorption into the lowest-energy excitonic state of the QD, activates intraband optical transitions, and shifts the photoluminescence of the QD to higher energy. This work establishes electrochemical interstitial doping as a reversible and highly controllable method for tuning the optical properties of colloidal QDs.

Phase-Inversion Polymer Composite Separators Based on Hexagonal Boron Nitride Nanosheets for High-Temperature Lithium-Ion Batteries.

By preventing electrical contact between anode and cathode electrodes while promoting ionic transport, separators are critical components in the safe operation of rechargeable battery technologies. However, traditional polymer-based separators have limited thermal stability, which has contributed to catastrophic thermal runaway failure modes that have conspicuously plagued lithium-ion batteries. Here, we describe the development of phase-inversion composite separators based on carbon-coated hexagonal boron nitride (hBN) nanosheets and poly(vinylidene fluoride) (PVDF) polymers that possess high porosity, electrolyte wettability, and thermal stability. The carbon-coated hBN nanosheets are obtained through a scalable liquid-phase shear exfoliation method using ethyl cellulose as a polymer stabilizer and source of the carbon coating following thermal pyrolysis. When incorporated within the PVDF matrix, the carbon-coated hBN nanosheets promote favorable interfacial interactions during the phase-inversion process, resulting in porous, flexible, free-standing composite separators. The unique chemical composition of these carbon-coated hBN separators implies high wettability for a wide range of liquid electrolytes. This combination of high porosity and electrolyte wettability enables enhanced ionic conductivity and lithium-ion battery electrochemical performance that exceeds incumbent polyolefin separators over a wide range of operating conditions. The hBN nanosheets also impart high thermal stability, providing safe lithium-ion battery operation up to 120 °C.

Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries.

Co-intercalation reactions make graphite as promising anodes for sodium ion batteries, however, the high redox potentials significantly lower the energy density. Herein, we investigate the factors that influence the co-intercalation potential of graphite and find that the tuning of the voltage as large as 0.38 V is achievable by adjusting the relative stability of ternary graphite intercalation compounds and the solvent activity in electrolytes. The feasibility of graphite anode in sodium ion batteries is confirmed in conjunction with Na1.5VPO4.8F0.7 cathodes by using the optimal electrolyte. The sodium ion battery delivers an improved voltage of 3.1 V, a high power density of 3863 W kg-1both electrodes, negligible temperature dependency of energy/power densities and an extremely low capacity fading rate of 0.007% per cycle over 1000 cycles, which are among the best thus far reported for sodium ion full cells, making it a competitive choice in large-scale energy storage systems.

High-Modulus Hexagonal Boron Nitride Nanoplatelet Gel Electrolytes for Solid-State Rechargeable Lithium-Ion Batteries.

Solid-state electrolytes based on ionic liquids and a gelling matrix are promising for rechargeable lithium-ion batteries due to their safety under diverse operating conditions, favorable electrochemical and thermal properties, and wide processing compatibility. However, gel electrolytes also suffer from low mechanical moduli, which imply poor structural integrity and thus an enhanced probability of electrical shorting, particularly under conditions that are favorable for lithium dendrite growth. Here, we realize high-modulus, ion-conductive gel electrolytes based on imidazolium ionic liquids and exfoliated hexagonal boron nitride (hBN) nanoplatelets. Compared to conventional bulk hBN microparticles, exfoliated hBN nanoplatelets improve the mechanical properties of gel electrolytes by 2 orders of magnitude (shear storage modulus ∼5 MPa), while retaining high ionic conductivity at room temperature (>1 mS cm-1). Moreover, exfoliated hBN nanoplatelets are compatible with high-voltage cathodes (>5 V vs Li/Li+) and impart exceptional thermal stability that allows high-rate operation of solid-state rechargeable lithium-ion batteries at temperatures up to 175 °C.