Four-Dimensional Visualization of Microscale Dynamics of Membrane Oil Fouling via Synchrotron Radiation Microcomputed Tomography.

Although oil-water separation technology via wettability-controlled membranes has emerged as a promising technology to treat oily wastewater, membrane fouling by faulents such as sludge flocs and colloids, and the consequent clogging of pores, severely degrades the efficiency of filtration systems. One of the main promotors of fouling by faulents is oil fouling, which is also a form of fouling itself. Despite considerable practical and academic interest in the analysis of oil-fouled membranes, direct visualization of the entire process of oil infiltration into hydrophilic membranes is still preliminary owing to (i) the similar optical contrast and physical density between oil and water, (ii) the low penetration depth of imaging methods, and (iii) the lack of 3D segmentation capability. In this study, microcomputed X-ray tomography using tunable synchrotron radiation provided direct high-speed 3D visualization of the microscale dynamics of the oil infiltration of a prewetted hydrophilic filter membrane over time. Direct visualization of the interfacial dynamics of oil infiltration opens a window into the complex liquid (water/oil)-gas-solid interface and thus helps furnish an in-depth understanding of oil fouling in the prewetted membrane.

Arrest of root caries with an adjuvant chlorhexidine-fluoride varnish over a 12-months observation period: a QLF-analyzed, placebo-controlled, randomized, clinical trial (RCT).

This study aimed at evaluating the effectiveness of an adjuvant chlorhexidine-fluoride varnish (Cervitec F) for prevention and arrest of root caries on elderly participants using quantitative light-induced fluorescence (QLF). 23 participants with two or three non-cavitated root carious lesions were included and assigned to three groups of different varnishes (CF: Cervitec F, P: placebo, DP: Duraphate). Agents were applied once to root surface at baseline and in follow-up after 3, 6 and 9 months. The lesions were assessed clinically and with QLF. QLF-images were analyzed regarding fluorescence loss (ΔF), lesion volume (ΔQ) and bacterial activity (ΔR) before (t0), after 14 days (t1), 6- (t2) and 12-months (t3). CF showed a significant difference between t0 and t3: ∆F (- 12.51 [15.41] vs. - 7.80 [16.72], p = 0.012), ∆Q (- 2339.97 (20,898.30) vs. - 751.82 (5725.35), p < 0.001), ∆R (23.80 [41.70] vs. 7.07 [37.50], p = 0.006). Independently of the varnish application, preventive care seems positively influence the root caries progress. Although within CF group the strongest effect was observed, no superiority of a specific varnish application was confirmed over a 12-months QLF observation period. Extra topical fluoride can help remineralise dentin lesions and QLF can be used as a measurement method to determine changes in the dentin lesions.

Evaluation of low-viscosity bulk-fill composites regarding marginal and internal adaptation.

This study aimed at evaluating the marginal and internal adaptation of low-viscosity bulk-fill composites to enamel and dentin using a self-etch or an etch-and-rinse adhesive without and with artificial ageing. Hundred and twenty-eight MOD cavities in extracted molars were assigned to eight groups (n = 16), restored with the adhesives OptiBond FL (OFL) or Xeno V+ (X) and two low-viscosity bulk-fill composites SDR or x-tra base, covered with Premise. Tetric EvoCeram Bulk Fill and Premise served as a control. n = 8 per group were subjected to prolonged water storage (180 days) and thermocycling (2500×). Scanning electron microscopy was used to determine marginal gaps (MG) and interfacial adhesive defects (IAD). There were no significant differences between composite types in 44 out of 48 (MG) or 43/48 (IAD) comparisons. More MG were observed with X than with OFL (14 out of 16 comparisons, two significant), while in 16 of 16 comparisons with X more IAD were observed (14 significant). After artificial ageing, MG generally increased (9/16 significant), compared to IAD (one significant). The performance of the investigated composite types concerning the integrity of the tooth-composites interface was comparable. Compared to the 1-step self-etch system, the bond with the 3-step etch-and-rinse adhesive was raised.

Direct Visualization of Microscale Dynamics of Water Droplets on under-Oil-Hydrophilic Membranes by Using Synchrotron White-Beam X-ray Microimaging Techniques.

Despite considerable academical and practical interests on separation of water-in-oil emulsion via special wettable membranes, fundamental understanding on microscale dynamics of water droplets on under-oil-hydrophilic membranes (UOHMs) at early stages during separation is still very preliminary due to temporal and spatial resolution of existing visualization techniques. To this end, we here succeed in a direct microscopic visualization of separation processes of water droplets on the UOHMs by employing a high-speed, two-dimensional synchrotron white-beam X-ray microimaging technique. During the separation of water-in-oil emulsion, microscale dynamic behaviors of water droplets on hydrophilic membrane surfaces immersed in the different oil media (i.e., hexane, kerosene, and light and heavy mineral oils) and oil films between water droplets and membrane surfaces are visualized and analyzed.

Correction to: Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

In the original publication of the article the paragraph "The four resin-based composites…" appearing below the "Materials and methods" section is incomplete. The correct paragraph is provided in this correction below.

Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

The aim of this study was to evaluate internal and marginal adaptation of high-viscosity bulk-fill composites to enamel and dentin with a self-etch (SE) and an etch-and-rinse adhesive (ER) without and with artificial aging. 128 MOD cavities in extracted human molars were prepared, randomly assigned to 8 groups (n = 16), bonded with either OptiBond FL (OFL, ER) or Xeno V+ (X, SE), and restored in 4 mm horizontal bulk layers with SonicFill (SF), Tetric EvoCeram Bulk fill (TEC), and x-tra fil (XF). Incremental layering technique with Premise (P) served as control. Half of the specimens each (n = 8) were subjected either to water storage (1 day, 37 °C) or prolonged storage (180 days) and thereafter thermocycling. Replicas were analyzed for marginal gap formation. After sectioning, interfacial adhesive defects were assessed. Results were statistical analyzed. (1) Internal adaptation: Except for TEC/OFL at enamel without artificial aging, no significant differences between bulk-fill composites and the control were observed. All groups at dentin with OFL showed less internal adhesive defects than that with X (p < 0.05). (2) Marginal adaptation: No significant differences were observed between bulk-fill composites and control except for P after artificial aging (p > 0.05). All other composites, regardless of artificial aging, formed significantly more marginal gaps at enamel with X compared to with OFL (p ≤ 0.05). Simplified restorations with high-viscosity bulk-fill composite showed comparable internal and marginal adaptation to incrementally placed fillings. A superiority of the 3-step ER approach was seen compared to the 1-step SE adhesive irrespective of the bulk-fill composite used.

Optical coherence tomography to evaluate variance in the extent of carious lesions in depth.

Evaluation of variance in the extent of carious lesions in depth at smooth surfaces within the same ICDAS code group using optical coherence tomography (OCT) in vitro and in vivo. (1) Verification/validation of OCT to assess non-cavitated caries: 13 human molars with ICDAS code 2 at smooth surfaces were imaged using OCT and light microscopy. Regions of interest (ROI) were categorized according to the depth of carious lesions. Agreement between histology and OCT was determined by unweighted Cohen's Kappa and Wilcoxon test. (2) Assessment of 133 smooth surfaces using ICDAS and OCT in vitro, 49 surfaces in vivo. ROI were categorized according to the caries extent (ICDAS: codes 0-4, OCT: scoring based on lesion depth). A frequency distribution of the OCT scores for each ICDAS code was determined. (1) Histology and OCT agreed moderately (κ = 0.54, p ≤ 0.001) with no significant difference between both methods (p = 0.25). The lesions (76.9% (10 of 13)) _were equally scored. (2) In vitro, OCT revealed caries in 42% of ROI clinically assessed as sound. OCT detected dentin-caries in 40% of ROIs visually assessed as enamel-caries. In vivo, large differences between ICDAS and OCT were observed. Carious lesions of ICDAS codes 1 and 2 vary largely in their extent in depth.

Genetic Characteristics of Polycythemia Vera and Essential Thrombocythemia in Korean Patients.

BACKGROUND: Despite recent advances in the investigation of myeloproliferative neoplasms (MPN), the impact of genetic heterogeneity on its molecular pathogenesis has not been fully elucidated. Thus, in this study, we aim to characterize the genetic complexity in Korean patients with polycythemia vera (PV) and essential thrombocythemia (ET). METHODS: We conducted association studies using 84 single-nucleotide polymorphisms (SNPs) in 229 patients (96 with PV and 133 with ET) and 170 controls. Further, whole-genome sequencing was performed in six patients (two with JAK2 V617F and four with wild-type JAK2), and putative somatic mutations were validated in a further 69 ET patients. Clinical and laboratory characteristics were also analyzed. RESULTS: Several germline SNPs and the 46 haplotype were significantly associated with PV and ET. Three somatic mutations in MPDZ, IQCH, and CALR genes were selected and validated. The frequency of the CALR mutation was 58.0% (40/69) in ET patients, who did not carry JAK2/MPL mutations. Moreover, compared with JAK2 V617F-positive patients, those with CALR mutations showed lower hemoglobin and hematocrit levels (P = 0.004 and P = 0.002, respectively), higher platelet counts (P =0.008), and a lower frequency of cytoreductive therapy (P = 0.014). CONCLUSION: This study was the first comprehensive investigation of the genetic characteristics of Korean patients with PV and ET. We found that somatic mutations and the 46 haplotype contribute to PV and ET pathogenesis in Korean patients.

A PDMS-Based 2-Axis Waterproof Scanner for Photoacoustic Microscopy.

Optical-resolution photoacoustic microscopy (OR-PAM) is an imaging tool to provide in vivo optically sensitive images in biomedical research. To achieve a small size, fast imaging speed, wide scan range, and high signal-to-noise ratios (SNRs) in a water environment, we introduce a polydimethylsiloxane (PDMS)-based 2-axis scanner for a flexible and waterproof structure. The design, theoretical background, fabrication process and performance of the scanner are explained in details. The designed and fabricated scanner has dimensions of 15 × 15 × 15 mm along the X, Y and Z axes, respectively. The characteristics of the scanner are tested under DC and AC conditions. By pairing with electromagnetic forces, the maximum scanning angles in air and water are 18° and 13° along the X and Y axes, respectively. The measured resonance frequencies in air and water are 60 and 45 Hz along the X axis and 45 and 30 Hz along the Y axis, respectively. Finally, OR-PAM with high SNRs is demonstrated using the fabricated scanner, and the PA images of micro-patterned samples and microvasculatures of a mouse ear are successfully obtained with high-resolution and wide-field of view. OR-PAM equipped with the 2-axis PDMS based waterproof scanner has lateral and axial resolutions of 3.6 µm and 26 µm, respectively. This compact OR-PAM system could potentially and widely be used in preclinical and clinical applications.

Tooth-composite bond failure with a universal and an etch-and-rinse adhesive depending on mode and frequency of application.

OBJECTIVES: To evaluate the effect of an additional layer of universal adhesive on the interfacial enamel/dentin-composite gap formation in relation to application mode and aging, via spectral domain optical coherence tomography (SD-OCT) and scanning electron microscopy (SEM). METHODS: In vitro class V cavities in 114 caries-free premolars were restored by applying one or two layers of a universal adhesive (Scotchbond Universal, SBU) in self-etch (se) and etch-and-rinse (er) mode or the reference adhesive OptiBond FL (OFL-er). The restorations were imaged by SD-OCT (six groups, n = 8) and SEM (n = 3) directly after filling (t1), water storage (t2, 24 h), embedding (t3), and thermo-mechanical loading (t4, TCML). The interfacial gaps were quantified using 26 parameters and analyzed using principal component analysis and linear mixed effect models. RESULTS: Gap formation at enamel and dentin was significantly influenced by the adhesive, the application mode and number of layers (p < 0.001). This was due to the influence of the SBU-er mode (p < 1e-05), which showed significantly more gap formation and a greater range of variation with double application when compared to SBU-se and OFL. The fewest interfacial gaps occurred with one or two applications of OFL-er and one layer of SBU-er. SIGNIFICANCE: Adhesive application mode and the number of adhesive layers are relevant factors in the tooth-composite bond failure. Double application worsened the adaptation of SBU to freshly prepared dentin conditioned with phosphoric acid.

Anti-4-1BB×PD-L1 Bispecific Antibody Reinvigorates Tumor-Specific Exhausted CD8+ T Cells and Enhances the Efficacy of Anti-PD-1 Blockade.

PURPOSE: To overcome the limited efficacy of immune checkpoint blockade, there is a need to find novel cancer immunotherapeutic strategies for the optimal treatment of cancer. The novel anti-4-1BB×PD-L1 bispecific antibody-ABL503 (also known as TJ-L14B)-was designed to simultaneously target PD-L1 and 4-1BB, and demonstrated strong antitumor T-cell responses without considerable toxicity. Here, we investigated how the combination of ABL503 and anti-PD-1 blockade affected the reinvigoration of exhausted tumor-infiltrating CD8+ T cells (CD8+ TILs) and anti-tumor efficacy. EXPERIMENTAL DESIGN: Single cell suspensions of hepatocellular carcinoma and ovarian cancer from treatment-naive patients were used for immunophenotyping of CD8+ TILs and in vitro functional assays. Humanized hPD-1/hPD-L1/h4-1BB triple knock-in mice were used to evaluate the effects of ABL503 and anti-PD-1 blockade in vivo. RESULTS: We observed that ABL503 successfully restored the functions of 4-1BB+ exhausted CD8+ TILs, which were enriched for tumor-specific T cells but unresponsive to anti-PD-1 blockade. Importantly, compared to anti-PD-1 blockade alone, the combination of ABL503 and anti-PD-1 blockade further enhanced the functional restoration of human CD8+ TILs in vitro. Consistently, the combination of ABL503 with anti-PD-1 in vivo significantly alleviated tumor growth, and induced enhanced infiltration and activation of CD8+ TILs. CONCLUSIONS: ABL503-a PD-L1 and 4-1BB dual-targeting bispecific antibody-elicits pronounced additive tumor growth inhibition, with increased infiltration and functionality of exhausted CD8+ T cells, which in turn enhances the anti-cancer effects of anti-PD-1 blockade. These promising findings suggest that ABL503 (TJ-L14B) in combination with PD-1 inhibitors will likely further enhance therapeutic benefit in clinical trials.

Death receptors 4 and 5 activate Nox1 NADPH oxidase through riboflavin kinase to induce reactive oxygen species-mediated apoptotic cell death.

Stimulation of the proapoptotic tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) receptors, death receptors 4 (DR4) and 5 (DR5), conventionally induces caspase-dependent apoptosis in tumor cells. Here we report that stimulation of DR4 and/or DR5 by the agonistic protein KD548-Fc, an Fc-fused DR4/DR5 dual-specific Kringle domain variant, activates plasma membrane-associated Nox1 NADPH oxidase to generate superoxide anion and subsequently accumulates intracellular reactive oxygen species (ROS), leading to sustained c-Jun N-terminal kinase activation and eventual apoptotic cell death in human HeLa and Jurkat tumor cells. KD548-Fc treatment induces the formation of a DR4/DR5 signaling complex containing riboflavin kinase (RFK), Nox1, the Nox1 subunits (Rac1, Noxo1, and Noxa1), TNF receptor-associated death domain (TRADD), and TNF receptor-associated factor 2 (TRAF2). Depletion of RFK, but not the Nox1 subunits, TRADD and TRAF2, failed to recruit Nox1 and Rac1 to DR4 and DR5, demonstrating that RFK plays an essential role in linking DR4/DR5 with Nox1. Knockdown studies also reveal that RFK, TRADD, and TRAF2 play critical, intermediate, and negligible roles, respectively, in the KD548-Fc-mediated ROS accumulation and downstream signaling. Binding assays using recombinantly expressed proteins suggest that DR4/DR5 directly interact with cytosolic RFK through RFK-binding regions within the intracellular death domains, and TRADD stabilizes the DR4/DR5-RFK complex. Our results suggest that DR4 and DR5 have a capability to activate Nox1 by recruiting RFK, resulting in ROS-mediated apoptotic cell death in tumor cells.

The proteasome inhibitor MG132 potentiates TRAIL receptor agonist-induced apoptosis by stabilizing tBid and Bik in human head and neck squamous cell carcinoma cells.

Head and neck squamous cell carcinoma (HNSCC) is often resistant to conventional chemotherapy and thus requires novel treatment regimens. Here, we investigated the effects of the proteasome inhibitor MG132 in combination with tumor necrosis factor-related apoptosis inducing ligand (TRAIL) or agonistic TRAIL receptor 1 (DR4)-specific monoclonal antibody, AY4, on sensitization of TRAIL- and AY4-resistant human HNSCC cell lines. Combination treatment of HNSCC cells synergistically induced apoptotic cell death accompanied by caspase-8, caspase-9, and caspase-3 activation and Bid cleavage into truncated Bid (tBid). Generation and accumulation of tBid through the cooperative action of MG132 with TRAIL or AY4 and Bik accumulation through MG132-mediated proteasome inhibition are critical to the synergistic apoptosis. In HNSCC cells, Bak was constrained by Mcl-1 and Bcl-X(L), but not by Bcl-2. Conversely, Bax did not interact with Mcl-1, Bcl-X(L), or Bcl-2. Importantly, tBid plays a major role in Bax activation, and Bik indirectly activates Bak by displacing it from Mcl-1 and Bcl-X(L), pointing to the synergistic mechanism of the combination treatment. In addition, knockdown of both Mcl-1 and Bcl-X(L) significantly sensitized HNSCC cells to TRAIL and AY4 as a single agent, suggesting that Bak constraint by Mcl-1 and Bcl-X(L) is an important resistance mechanism of TRAIL receptor-mediated apoptotic cell death. Our results provide a novel molecular mechanism for the potent synergy between MG132 proteasome inhibitor and TRAIL receptor agonists in HNSCC cells, suggesting that the combination of these agents may offer a new therapeutic strategy for HNSCC treatment.

Engineering of a human kringle domain into agonistic and antagonistic binding proteins functioning in vitro and in vivo.

Here, we report the development of target-specific binding proteins based on the kringle domain (KD) ( approximately 80 residues), a ubiquitous modular structural unit occurring across eukaryotic species. By exploiting the highly conserved backbone folding by core residues, but using extensive sequence variations in the seven loop regions of naturally occurring human KDs, we generated a synthetic KD library on the yeast cell surface by randomizing 45 residues in the loops of a human KD template. We isolated KD variants that specifically bind to anticancer target proteins, such as human death receptor 4 (DR4) and/or DR5, and that function as agonists to induce apoptotic cell death in several cancer cell lines in vitro and inhibit tumor progression in mouse models. Combined treatments with KD variants possessing different recognition sites on the same target protein exerted synergisitic tumoricidal activities, compared to treatment with individual variants. In addition to the agonists, we isolated an antagonistic KD variant that binds human tumor necrosis factor-alpha (TNFalpha) and efficiently neutralizes TNFalpha-induced cytotoxicity in vitro and in vivo. The KD scaffold with seven flexible loops protruding from the central core was strongly sequence-tolerant to mutations in the loop regions, offering a potential advantage of distinct binding sites for target recognition on the single domain. Our results suggest that the KD scaffold can be used to develop target-specific binding proteins that function as agonists or antagonists toward given target molecules, indicative of their potential use as biotherapeutics.

Evaluation of quantitative light-induced fluorescence to assess lesion depth in cavitated and non-cavitated root caries lesions - An in vitro study.

BACKGROUND: This in vitro study aimed to assess carious lesions on root surfaces using quantitative light-induced fluorescence (QLF) and to compare the readings with axial lesion depth on µCT. METHODS: The root surfaces of 107 extracted human teeth were included after visual-tactile inspection. For further analysis, the following parameters were assessed: clinical findings (non-cavitated: leathery or hard, cavitated), QLF- (QLF-D Biluminator 2+), and µCT-images (Bruker Skyscan 1172). The shape of the undamaged tooth surface of the cavitated lesions was virtually re-constructed during µCT analysis. Clinical surface texture,% fluorescence loss, and lesion depth (µCT) were determined. STATISTICAL ANALYSIS: chi²-test, Spearman-Rho test, regression analysis. RESULTS: ∆F was significantly lower in non-cavitated leathery (-50.37 ± 15.10) and cavitated (-61.23 ± 9.92) compared to non-cavitated surfaces with a hard texture (-17.04 ± 16.10, p < 0.01). For non-cavitated surfaces, a negative correlation was observed between ∆F and lesion depth in µCT images regardless of texture (-0.748, p < 0.01). Regression analysis revealed that ∆F predicted lesion depth in µCT for non-cavitated surfaces (ß: 0.703, CI95: 0.67--0.43, p < 0.01). CONCLUSION: The percentage of fluorescence loss (∆F) in QLF predicted lesion depth of non-cavitated demineralized root surfaces. Therefore, QLF can be recommended for estimating the lesion depth of carious root lesions and seems to expand the possibilities of follow-up and lesion monitoring, especially for non-cavitated surfaces.

Clinical and OCT assessment of application modes of a universal adhesive in a 12-month RCT.

OBJECTIVES: To evaluate a universal adhesive clinically using FDI criteria and by optical coherence tomography (OCT). METHODS: In 50 patients, three or four non-carious cervical lesions (NCCL) were restored with composite (Venus® Diamond Flow, Kulzer) using iBond® Universal (iBU, Kulzer) applied in self-etch (iBU-SE, n = 50), selective-enamel-etch (iBU-SEE, n = 29) or etch-and-rinse mode (iBU-ER, n = 50) and the reference OptiBond™ FL (OFL, Kerr, n = 50). Restorations were imaged by SD-OCT. The weighted mean length of interfacial adhesive defects (AD, %) was quantified per restoration immediately after placement (t0), simultaneously with clinical assessment (FDI criteria) after 14 days (t1), 6 (t2) and 12 months (t3). Data were statistically analyzed (McNemar-/Wilcoxon-/Mann-Whitney-U test (α = 0.05), Kaplan-Meier survival curves). RESULTS: After 12 months, cumulative failure rates were lower with iBU-SE (0.0%; p = 0.016), iBU-SEE (0.0%; p = 0.125), and iBU-ER (2.1%; p = 0.070; loss t3) compared to OFL (16.7%; losses t2, t3). Generally, marginal adaptation decreased (pi < 0.001) and marginal staining increased (pi ≤ 0.031), without significant group differences (pi > 0.064). AD increased in all groups (pi < 0.001). At enamel, AD appeared more extended with iBU-SE vs. iBU-SEE (t2-t3; pi ≤ 0.005), iBU-ER (t1-t3; pi ≤ 0.051) and OFL (t0-t3; pi ≤ 0.018). At dentin/cement iBU generally caused fewer defects than OFL (t1-t3; pi ≤ 0.010) and with SE vs. ER (t2-t3; pi = 0.010). CONCLUSIONS: In NCCLs, iBU generally provides a more durable bond than OFL. Recommended mode is SEE. Clinic and OCT provided comparable results. OCT has higher statistical power, shows group differences earlier and specifically for the different hard tooth tissues. CLINICAL SIGNIFICANCE: The universal adhesive iBU was superior against the reference OFL in NCCLs. It can be recommended with SEE. Evaluation of interfacial adhesive defects by OCT seems to allow early prediction of adhesives' clinical performance.

Light-based diagnostic methods for the in vivo assessment of initial caries lesions: Laser fluorescence, QLF and OCT.

OBJECTIVES: To evaluate different light-based caries diagnostic methods for assessment of non-cavitated initial carious lesions on smooth surfaces. METHODS: 39 participants were included. For each participant, three regions of interest (ROI) with ICDAS codes 0, 1 or 2 were defined. All ROIs (n = 117) were investigated/imaged with laser fluorescence (LF, DIAGNOdent 2095; KaVo dental GmbH), quantitative light-induced fluorescence (QLF; Biluminator 2+, Inspektor Research Systems B.V.) and spectral-domain optical coherence tomography (SD-OCT; Telesto II, Thorlabs GmbH). The values of LF, ΔF of QLF, and the lesion extent assessed by OCT were categorized. Frequency distribution of LF-/QLF- and OCT-scores was determined for each ICDAS code included. Inter- and intra-examiner reproducibility of QLF and OCT measurements were assessed by unweighted kappa coefficient (ĸ) and Wilcoxon test (α = 0.05). RESULTS: Compared with LF and QLF, OCT showed various manifestations of carious lesions for visually sound ROIs and a larger variation of caries extent in depth within the same ICDAS code groups. Intra-examiner reproducibility ranged between 0.49 and 1.00 for the QLF analysis and between 0.95 and 0.99 for the OCT analysis. Inter-examiner reproducibility ranged between 0.17 and 0.32 for the QLF analysis and between 0.65 and 0.79 for the OCT analysis. CONCLUSION: LF and QLF were insensitive to less pronounced smooth-surface lesions while OCT allowed differentiation based on the penetration depth of the carious lesions. This makes OCT a suitable method to complement conventional visual inspection in order to detect and assess (very) early lesions.

Fabrication of Oblique Submicron-Scale Structures Using Synchrotron Hard X-ray Lithography.

Oblique submicron-scale structures are used in various aspects of research, such as the directional characteristics of dry adhesives and wettability. Although deposition, etching, and lithography techniques are applied to fabricate oblique submicron-scale structures, these approaches have the problem of the controllability or throughput of the structures. Here, we propose a simple X-ray-lithography method, which can control the oblique angle of submicron-scale structures with areas on the centimeter scale. An X-ray mask was fabricated by gold film deposition on slanted structures. Using this mask, oblique ZEP520A photoresist structures with slopes of 20° and 10° and widths of 510 nm and 345 nm were fabricated by oblique X-ray exposure, and the possibility of polydimethylsiloxane (PDMS) molding was also confirmed. In addition, through double exposure with submicron- and micron-scale X-ray masks, dotted-line patterns were produced as an example of multiscale patterning.

Assessment of non-cavitated root caries lesions by quantitative light-induced fluorescence-An in vivo feasibility study.

OBJECTIVES: To evaluate the reproducibility of quantitative light-induced fluorescence (QLF) for the detection and assessment of demineralization states of non-cavitated root surfaces and to determine the correlation between visual inspection and QLF-analysis. METHODS: 46 exposed non-cavitated root surfaces of 12 participants were classified in three scores: sound (0), lesion ≤ 5 mm (1a), lesion > 5 mm in diameter (1b). Three examiners imaged every root surface three times using QLF (QRayCam) and measured fluorescence loss (ΔF) and lesion volume (ΔQ). The QLF-images were analyzed by three examiners. The intra- and interexaminer reproducibilities were calculated (intraclass correlation coefficient, ICC). The correlation between the scores of root caries and QLF-analysis was determined (rank correlation coefficient, Spearman-Rho ρ). RESULTS: Intra- and interexaminer reproducibility (ICC) was 0.98 and 0.95 for ΔF, 0.94 and 0.91 for ΔQ, respectively. A significant correlation was observed between the scores and ΔF (ρ = -0.53, p < 0.01). CONCLUSION: QLF as a reproducible diagnostic tool enables non-invasive detection and differentiation of non-cavitated root caries lesions on root surfaces in vivo. It can be recommended in addition to the clinical evaluation for prospective follow-up examinations of demineralization states of exposed root surfaces.