The role of asymmetry and volume of thrombotic masses in the formation of local deformation of the aneurysmal-altered vascular wall: An in vivo study and mathematical modeling.

Currently, the primary factor indicating the necessity of an operation for an abdominal aortic aneurysm (AAA) is the diameter at its widest part. However, in practice, a large number of aneurysm ruptures occur before reaching a critical size. This means that the mechanics of aneurysm growth and remodeling have not been fully elucidated. This study presents a novel method for assessing the elastic properties of an aneurysm using an ultrasound technique based on tracking the oscillations of the vascular wall as well as the inner border of the thrombus. Twenty nine patients with AAA and eighteen healthy volunteers were considered. The study presents the stratification of a group of patients according to the elastic properties of the aneurysm, depending on the relative volume of intraluminal thrombus masses. Additionally, the neural network analysis of CT angiography images of these patients shows direct (r = 0.664271) correlation with thrombus volume according to ultrasound data, the reliability of the Spearman correlation is p = 0.000215. The use of finite element numerical analysis made it possible to reveal the mechanism of the negative impact on the AAA integrity of an asymmetrically located intraluminal thrombus. The aneurysm itself is considered as a complex structure consisting of a wall, intraluminal thrombus masses, and areas of calcification. When the thrombus occupies > 70% of the lumen of the aneurysm, the deformations of the outer and inner surfaces of the thrombus have different rates, leading to tensile stresses in the thrombus. This poses a risk of its detachment and subsequent thromboembolism or the rupture of the aneurysm wall. This study is the first to provide a mechanistic explanation for the effects of an asymmetrical intraluminal thrombus in an abdominal aortic aneurysm. The obtained results will help develop more accurate risk criteria for AAA rupture using non-invasive conventional diagnostic methods.

Hemodynamics of vascular shunts: trends, challenges, and prospects.

Vascular bypass surgery takes a significant place in the treatment of vascular disease. According to various assessments, this type of surgery is associated with almost 20 % of all vascular surgery episodes (up to 23 % according to the Federal Neurosurgical Center of Novosibirsk). Even though the problem of using of vascular grafts is obvious and natural, many problems associated with them are not still elucidated. From the mechanics' point of view, a vascular bypass is a converging or diverging tee, and the functioning of such structures still does not have strict mathematical formulations and proofs in the general case, which forces many researchers to solve specific engineering problems associated with shunting. Mathematical modeling, which is the gold standard for virtual simulations of industrial and medical problems, faces great difficulties and limitations in solving problems for vascular bypasses. Complications in the treatment of the vascular disease may follow the difficulties in mathematical modeling, and the price can be a cardiac arrest or a stroke. This work is devoted to the main aspects of the medical application of vascular bypasses and their functioning as a mechanical system, as well the mathematical aspects of their possible setup.

Rheological Properties of Non-Adhesive Embolizing Compounds-The Key to Fine-Tuning Embolization Process-Modeling in Endovascular Surgery.

The study of polymers' rheological properties is of paramount importance both for the problems of their industrial production as well as for their practical application. Two polymers used for embolization of arteriovenous malformations (AVMs) are studied in this work: Onyx-18® and Squid-12®. Viscosity curve tests and computational fluid dynamics (CFD) were used to uncover viscosity law as a function of shear rate as well as behavior of the polymers in catheter or pathological tissue models. The property of thermal activation of viscosity was demonstrated, namely, the law of dependence of viscosity on temperature in the range from 20 °C to 37 °C was established. A zone of viscosity nonmonotonicity was identified, and a physical interpretation of the dependence of the embolic polymers' viscosity on the shear rate was given on the basis of Cisco's model. The obtained empirical constants will be useful for researchers based on the CFD of AVMs. A description of the process of temperature activation of the embolic polymers' viscosity is important for understanding the mechanics of the embolization process by practicing surgeons as well as for producing new prospective embolic agents.

Numerical Assessment of the Risk of Abnormal Endothelialization for Diverter Devices: Clinical Data Driven Numerical Study.

Numerical modeling is an effective tool for preoperative planning. The present work is devoted to a retrospective analysis of neurosurgical treatments for the occlusion of cerebral aneurysms using flow-diverters and hemodynamic factors affecting stent endothelization. Several different geometric approaches have been considered for virtual flow-diverters deployment. A comparative analysis of hemodynamic parameters as a result of computational modeling has been carried out basing on the four clinical cases: one successful treatment, one with no occlusion and two with in stent stenosis. For the first time, a quantitative assessment of both: the limiting magnitude of shear stresses that are necessary for the occurrence of in stent stenosis (MaxWSS > 1.23) and for conditions in which endothelialization is insufficiently active and occlusion of the cervical part of the aneurysm does not occur (MaxWSS < 1.68)­has been statistacally proven (p < 0.01).

Cerebral arterial architectonics and CFD simulation in mice with type 1 diabetes mellitus of different duration.

Type 1 diabetes is a chronic autoimmune disease that affects tens of millions of people. Diabetes mellitus is one of the strongest factors in the development of cerebrovascular diseases. In this study we used NOD.CB17 Prkdcscid mice and the pharmacological model of type 1 diabetes mellitus of different duration to study changes in the cerebral vasculature. We used two combined approaches using magnetic resonance angiography both steady and transient CFD blood flow modeling. We identified the influence of type 1 diabetes on the architectonics and hemodynamics of the large blood vessels of the brain as the disease progresses. For the first time, we detected a statistically significant change in angioarchitectonics (the angles between the vessels of the circle of Willis, cross-sections areas of vessels) and hemodynamic (maximum blood flow rate, hydraulic resistance) in animals with diabetes duration of 2 months, that is manifested by the development of asymmetry of cerebral blood flow. The result shows the negative effect of diabetes on cerebral circulation as well as the practicability of CFD modeling. This may be of extensive interest, in pharmacological and preclinical studies.

The Relationship between the Strength Characteristics of Cerebral Aneurysm Walls with Their Status and Laser-Induced Fluorescence Data.

BACKGROUND: Cerebral aneurysms (CA) are a widespread vascular disease affecting 50 per 1000 population. The study of the influence of histological, morphological and hemodynamic factors on the status of the aneurysm has been the subject of many works. However, an accurate and generally accepted relationship has not yet been identified. METHODS: In our work, the results of mechanical and spectroscopic measurements are considered. Total investigated 14 patients and 36 their samples of CA tissue. RESULTS: The excitation-emission matrix of each specimen was evaluated, after which the strength characteristics of the samples were investigated. CONCLUSIONS: It has been shown that there is a statistically significant difference in the size of the peaks of two components, which characterizes the status of the aneurysms. In addition, a linear regression model has been built that describes the correlation of the magnitude of the ultimate strain and stress with the magnitude of the peaks of one of the components. The results of this study will serve as a basis for the non-invasive determination of the strength characteristics of the cerebral tissue aneurysms and determination of their status.

The Effect of Adding Modified Chitosan on the Strength Properties of Bacterial Cellulose for Clinical Applications.

Currently, several materials for the closure of the dura mater (DM) defects are known. However, the long-term results of their usage reveal a number of disadvantages. The use of antibiotics and chitosan is one of the major trends in solving the problems associated with infectious after-operational complications. This work compares the mechanical properties of samples of bacterial nanocellulose (BNC) impregnated with Novochizol™ and vancomycin with native BNC and preserved and native human DM. An assessment of the possibility of controling the mechanical properties of these materials by changing their thickness has been performed by statistical analysis methods. A total of 80 specimens of comparable samples were investigated. During the analysis, the results obtained, the factor of Novochizol™ addition has provided a statistically significant impact on the strength properties (Fisher Criteria p-value 0.00509 for stress and 0.00112 for deformation). Moreover, a stronger relationship between the thickness of the samples and their ultimate load was shown: R2=0.236 for BNC + Novochizol™ + vancomycin, compared to R2=0.0405 for native BNC. Using factor analysis, it was possible to show a significant effect of modified chitosan (Novochizol™) on the ultimate stress (p-value = 0.005).