Reversible, Covalent DNA Condensation Approach Using Chemical Linkers for Enhanced Gene Delivery.

Nonviral gene delivery has emerged as a promising technology for gene therapy. Nonetheless, these approaches often face challenges, primarily associated with lower efficiency, which can be attributed to the inefficient transportation of DNA into the nucleus. Here, we report a two-stage condensation approach to achieve efficient nuclear transport of DNA. First, we utilize chemical linkers to cross-link DNA plasmids via a reversible covalent bond to form smaller-sized bundled DNA (b-DNA). Then, we package the b-DNA into cationic vectors to further condense b-DNA and enable efficient gene delivery to the nucleus. We demonstrate clear improvements in the gene transfection efficiency in vitro, including with 11.6 kbp plasmids and in primary cultured neurons. Moreover, we also observed a remarkable improvement in lung-selective gene transfection efficiency in vivo by this two-stage condensation approach following intravenous administration. This reversible covalent assembly strategy demonstrates substantial value of nonviral gene delivery for clinical therapeutic applications.

Electrostatic and Covalent Assemblies of Anionic Hydrogel-Coated Gold Nanoshells for Detection of Dry Eye Biomarkers in Human Tears.

Although dry eye is highly prevalent, many challenges exist in diagnosing the symptom and related diseases. For this reason, anionic hydrogel-coated gold nanoshells (AuNSs) were used in the development of a label-free biosensor for detection of high isoelectric point tear biomarkers associated with dry eye. A custom, aldehyde-functionalized oligo(ethylene glycol)acrylate (Al-OEGA) was included in the hydrogel coating to enhance protein recognition through the formation of dynamic covalent (DC) imine bonds with solvent-accessible lysine residues present on the surface of select tear proteins. Our results demonstrated that hydrogel-coated AuNSs, composed of monomers that form ionic and DC bonds with select tear proteins, greatly enhance protein recognition due to changes in the maximum localized surface plasmon resonance wavelength exhibited by AuNSs in noncompetitive and competitive environments. Validation of the developed biosensor in commercially available pooled human tears revealed the potential for clinical translation to establish a method for dry eye diagnosis.

Lipid- and Polymer-Based Nanoparticle Systems for the Delivery of CRISPR/Cas9.

The discovery of clustered regularly interspaced short palindromic repeat (CRISPR)/ CRISPR-associated (Cas) genome editing systems and their applications in human health and medicine has heralded a new era of biotechnology. However, the delivery of CRISPR therapeutics is arguably the most difficult barrier to overcome for translation to in vivo clinical administration. Appropriate delivery methods are required to efficiently and selectively transport all gene editing components to specific target cells and tissues of interest, while minimizing off-target effects. To overcome this challenge, we discuss and critic nanoparticle delivery strategies, focusing on the use of lipid-based and polymeric-based matrices herein.

Recent Advances in Smart Biomaterials for the Detection and Treatment of Autoimmune Diseases.

Autoimmune diseases are a group of debilitating illnesses that are often idiopathic in nature. The steady rise in the prevalence of these conditions warrants new approaches for diagnosis and treatment. Stimuli-responsive biomaterials also known as "smart", "intelligent" or "recognitive" biomaterials are widely studied for their applications in drug delivery, biosensing and tissue engineering due to their ability to produce thermal, optical, chemical, or structural changes upon interacting with the biological environment. This critical analysis highlights studies within the last decade that harness the recognitive capabilities of these biomaterials towards the development of novel detection and treatment options for autoimmune diseases.

Optimization of Cationic Nanogel PEGylation to Achieve Mammalian Cytocompatibility with Limited Loss of Gram-Negative Bactericidal Activity.

Tuning the composition of antimicrobial nanogels can significantly alter both nanogel cytotoxicity and antibacterial activity. This project investigated the extent to which PEGylation of cationic, hydrophobic nanogels altered their cytotoxicity and bactericidal activity. These biodegradable, cationic nanogels were synthesized by activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) emulsion polymerization with up to 13.9 wt % PEG (MW = 2000) MA, as verified by 1H NMR. Nanogel bactericidal activity was assessed against Gram-negative E. coli and P. aeruginosa and Gram-positive S. mutans and S. aureus by measuring membrane lysis with a LIVE/DEAD assay. E. coli and S. mutans viability was further validated by measuring metabolic activity with a PrestoBlue assay and imaging bacteria stained with a LIVE/DEAD probe. All tested nanogels decreased the membrane integrity (0.5 mg/mL dose) for Gram-negative E. coli and P. aeruginosa, irrespective of the extent of PEGylation. PEGylation (13.9 wt %) increased the cytocompatibility of cationic nanogels toward RAW 264.7 murine macrophages and L929 murine fibroblasts by over 100-fold, relative to control nanogels. PEGylation (42.8 wt %) reduced nanogel uptake by 43% for macrophages and 63% for fibroblasts. Therefore, PEGylation reduced nanogel toxicity to mammalian cells without significantly compromising their bactericidal activity. These results facilitate future nanogel design for perturbing the growth of Gram-negative bacteria.

Molecular recognition with soft biomaterials.

Biomacromolecules and engineered materials can achieve molecular recognition if they engage their ligand with properly oriented and chemically complementary moieties. Recently, there has been significant interest in fabricating recognitive soft materials, which possess specific affinity for biological analytes. We present a summary and evaluation of current recognitive materials for biosensing, drug delivery, and regenerative medicine applications. We highlight the impact of material composition on the extent and specificity of ligand adsorption, citing new theoretical and empirical evidence. We conclude with a guide for synthesizing and characterizing novel recognitive materials, as well as recommendations for ligand selection and experimental design.

Modular Fabrication of Intelligent Material-Tissue Interfaces for Bioinspired and Biomimetic Devices.

One of the goals of biomaterials science is to reverse engineer aspects of human and nonhuman physiology. Similar to the body's regulatory mechanisms, such devices must transduce changes in the physiological environment or the presence of an external stimulus into a detectable or therapeutic response. This review is a comprehensive evaluation and critical analysis of the design and fabrication of environmentally responsive cell-material constructs for bioinspired machinery and biomimetic devices. In a bottom-up analysis, we begin by reviewing fundamental principles that explain materials' responses to chemical gradients, biomarkers, electromagnetic fields, light, and temperature. Strategies for fabricating highly ordered assemblies of material components at the nano to macro-scales via directed assembly, lithography, 3D printing and 4D printing are also presented. We conclude with an account of contemporary material-tissue interfaces within bioinspired and biomimetic devices for peptide delivery, cancer theranostics, biomonitoring, neuroprosthetics, soft robotics, and biological machines.

Engineered microscale hydrogels for drug delivery, cell therapy, and sequencing.

Engineered microscale hydrogels have emerged as promising therapeutic approaches for the treatment of various diseases. These microgels find wide application in the biomedical field because of the ease of injectability, controlled release of therapeutics, flexible means of synthesis, associated tunability, and can be engineered as stimuli-responsive. While bulk hydrogels of several length-scale dimensions have been used for over two decades in drug delivery applications, their use as microscale carriers of drug and cell-based therapies is relatively new. Herein, we critically summarize the fundamentals of hydrogels based on their equilibrium and dynamics of their molecular structure, as well as solute diffusion as it relates to drug delivery. In addition, examples of common microgel synthesis techniques are provided. The ability to tune microscale hydrogels to obtain controlled release of therapeutics is discussed, along with microgel considerations for cell encapsulation as it relates to the development of cell-based therapies. We conclude with an outlook on the use of microgels for cell sequencing, and the convergence of the use of microscale hydrogels for drug delivery, cell therapy, and cell sequencing based systems.

Analyte-Responsive Hydrogels: Intelligent Materials for Biosensing and Drug Delivery.

Nature has mastered the art of molecular recognition. For example, using synergistic non-covalent interactions, proteins can distinguish between molecules and bind a partner with incredible affinity and specificity. Scientists have developed, and continue to develop, techniques to investigate and better understand molecular recognition. As a consequence, analyte-responsive hydrogels that mimic these recognitive processes have emerged as a class of intelligent materials. These materials are unique not only in the type of analyte to which they respond but also in how molecular recognition is achieved and how the hydrogel responds to the analyte. Traditional intelligent hydrogels can respond to environmental cues such as pH, temperature, and ionic strength. The functional monomers used to make these hydrogels can be varied to achieve responsive behavior. For analyte-responsive hydrogels, molecular recognition can also be achieved by incorporating biomolecules with inherent molecular recognition properties (e.g., nucleic acids, peptides, enzymes, etc.) into the polymer network. Furthermore, in addition to typical swelling/syneresis responses, these materials exhibit unique responsive behaviors, such as gel assembly or disassembly, upon interaction with the target analyte. With the diverse tools available for molecular recognition and the ability to generate unique responsive behaviors, analyte-responsive hydrogels have found great utility in a wide range of applications. In this Account, we discuss strategies for making four different classes of analyte-responsive hydrogels, specifically, non-imprinted, molecularly imprinted, biomolecule-containing, and enzymatically responsive hydrogels. Then we explore how these materials have been incorporated into sensors and drug delivery systems, highlighting examples that demonstrate the versatility of these materials. For example, in addition to the molecular recognition properties of analyte-responsive hydrogels, the physicochemical changes that are induced upon analyte binding can be exploited to generate a detectable signal for sensing applications. As research in this area has grown, a number of creative approaches for improving the selectivity and sensitivity (i.e., detection limit) of these sensors have emerged. For applications in drug delivery systems, therapeutic release can be triggered by competitive molecular interactions or physicochemical changes in the network. Additionally, including degradable units within the network can enable sustained and responsive therapeutic release. Several exciting examples exploiting the analyte-responsive behavior of hydrogels for the treatment of cancer, diabetes, and irritable bowel syndrome are discussed in detail. We expect that creative and combinatorial approaches used in the design of analyte-responsive hydrogels will continue to yield materials with great potential in the fields of sensing and drug delivery.

pH-Responsive Microencapsulation Systems for the Oral Delivery of Polyanhydride Nanoparticles.

Multicompartmental polymer carriers, referred to as Polyanhydride-Releasing Oral MicroParticle Technology (PROMPT), were formed by a pH-triggered antisolvent precipitation technique. Polyanhydride nanoparticles were encapsulated into anionic pH-responsive microparticle gels, allowing for nanoparticle encapsulation in acidic conditions and subsequent release in neutral pH conditions. The effects of varying the nanoparticle composition and feed ratio on the encapsulation efficiency were evaluated. Nanoparticle encapsulation was confirmed by confocal microscopy and infrared spectroscopy. pH-triggered protein delivery from PROMPT was explored using ovalbumin (ova) as a model drug. PROMPT microgels released ova in a pH-controlled manner. Increasing the feed ratio of nanoparticles into the microgels increased the total amount of ova delivered, as well as decreased the observed burst release. The cytocompatibility of the polymer materials were assessed using cells representative of the GI tract. Overall, these results suggest that pH-dependent microencapsulation is a viable platform to achieve targeted intestinal delivery of polyanhydride nanoparticles and their payload(s).

Combination Strategy with Complexation Hydrogels and Cell-Penetrating Peptides for Oral Delivery of Insulin.

In previous studies we showed that the complexation hydrogels based in poly(methacrylic acid-g-ethylene glycol) [P(MAA-g-EG)] rapidly release insulin in the intestine owing to their pH-dependent complexation properties; they also exhibit a high insulin-loading efficiency, enzyme-inhibiting properties, and mucoadhesive characteristics. Cell-penetrating peptides (CPPs), such as oligoarginines [hexa-arginine (R6), comprising six arginine residues], have been employed as useful tools for the oral delivery of therapeutic macromolecules. The aim of our study was to investigate the combination strategy of using P(MAA-g-EG) hydrogels with R6-based CPPs to improve the intestinal absorption of insulin. A high efficiency of loading into crosslinked P(MAA-g-EG) hydrogels was observed for insulin (96.1±1.4%) and R6 (46.6±3.8%). In addition, immediate release of the loaded insulin and R6 from these hydrogels was observed at pH 7.4 (80% was released in approximately 30 min). Consequently, a strong hypoglycemic response was observed (approximately 18% reduction in blood glucose levels) accompanied by an improvement in insulin absorption after the co-administration of insulin-loaded particles (ILP) and R6-loaded particles (ALP) into closed rat ileal segments compared with that after ILP administration alone. These results indicate that the combination of P(MAA-g-EG) hydrogels with CPPs may be a promising strategy for the oral delivery of various insulin preparations as an alternative to conventional parenteral routes.

Charged poly(N-isopropylacrylamide) nanogels for use as differential protein receptors in a turbidimetric sensor array.

Due to the high cost and environmental instability of antibodies, there is precedent for developing synthetic molecular recognition agents for use in diagnostic sensors. While these materials typically have lower specificity than antibodies, their cross-reactivity makes them excellent candidates for use in differential sensing routines. In the current work, we design a set of charge-containing poly(N-isopropylacrylamide) (PNIPAM) nanogels for use as differential protein receptors in a turbidimetric sensor array. Specifically, NIPAM was copolymerized with methacrylic acid and modified via carbodiimide coupling to introduce sulfate, guanidinium, secondary amine, or primary amine groups. Modification of the ionizable groups in the network changed the physicochemical and protein binding properties of the nanogels. For high affinity protein-polymer interactions, turbidity of the nanogel solution increased, while for low affinity interactions minimal change in turbidity was observed. Thus, relative turbidity was used as input for multivariate analysis. Turbidimetric assays were performed in two buffers of different pH (i.e., 7.4 and 5.5), but comparable ionic strength, in order to improve differentiation. Using both buffers, it was possible to achieve 100% classification accuracy of eleven model protein biomarkers with as few as two of the nanogel receptors. Additionally, it was possible to detect changes in lysozyme concentration in a simulated tear fluid using the turbidimetric sensor array.

Versatile Route to Colloidal Stability and Surface Functionalization of Hydrophobic Nanomaterials.

We introduce a general method for the stabilization and surface functionalization of hydrophobic nanoparticles using an amphiphilic copolymer, poly(maleic anhydride-alt-1-octadecene)-poly(ethylene glycol) methacrylate (PMAO-PEGMA). Coating nanoparticles with PMAO-PEGMA results in colloidally stable nanoparticles decorated with reactive carboxylic acid and methacrylate functionalities, providing a versatile platform for chemical reactions. The versatility and ease of surface functionalization is demonstrated by varying both the core material and the chemistry used. Specifically, the carboxylic acid functionalities are used to conjugate wheat germ agglutinin to conducting polymer nanoparticles via carbodiimide-mediated coupling, and the methacrylate groups are used to link cysteamine to the surface of poly(ε-caprolactone) nanoparticles via thiol-ene click chemistry and to link temperature-responsive polymer shells to the surface of gold nanoparticles via free radical polymerization.

Enzyme- and pH-Responsive Microencapsulated Nanogels for Oral Delivery of siRNA to Induce TNF-α Knockdown in the Intestine.

Inflammatory bowel diseases (IBD) manifest from excessive intestinal inflammation. Local delivery of siRNA that targets these inflammatory cytokines would provide a novel treatment approach. Microencapsulated nanogels are designed and validated as platforms for oral delivery of siRNA targeting TNF-α, a common clinical target of IBD treatments. The preferred platform was designed to (i) protect siRNA-loaded nanogels from the harsh acidic environment of the upper GI tract and (ii) enzymatically degrade and release the nanogels once the carrier has reached the intestinal region. This platform consists of microgels composed of poly(methacrylic acid-co-N-vinyl-2-pyrrolidone) (P[MAA-co-NVP]) cross-linked with a trypsin-degradable peptide linker. The P(MAA-co-NVP) backbone is designed to collapse around and protect encapsulated nanogel from degradation at the low pH levels seen in the stomach (pH 2-4). At pH levels of 6-7.5, as typically observed in the intestine, the P(MAA-co-NVP) matrix swells, potentially facilitating diffusion of intestinal fluid and degradation of the matrix by intestinal enzymes such as trypsin, thus "freeing" the therapeutic nanogels for delivery and cellular uptake within the intestine. TNF-α siRNA-loaded nanogels released from this platform were capable of inducing potent knockdown of secreted TNF-α levels in murine macrophages, further validating the potential for this approach to be used for the treatment of IBD.

A Closer Look at the Impact of Molecular Imprinting on Adsorption Capacity and Selectivity for Protein Templates.

Molecularly imprinted polymers (MIPs) are often investigated as lower cost, more environmentally robust alternatives to natural recognitive biomolecules, such as antibodies. When synthesized on the surface of nanomaterial supports, MIPs are capable of quick and effective binding of macromolecular templates when compared to traditional bulk-imprinted polymers. We have developed a method for imprinting proteins on biodegradable nanoparticle supports and have used these materials to investigate the impact of molecular imprinting on adsorption capacity and selectivity for lysozyme, the template protein. The imprinting process increased the adsorption capacity of the polymer for the template, lysozyme, with the MIPs being able to bind up to 83.5% of their dry weight as compared to 55.7% for nonimprinted polymers (NIPs). In noncompetitive binding experiments, where proteins were independently incubated with MIPs, the difference between adsorption capacity for lysozyme and proteins with much lower isoelectric points (pI < 8.0) was statistically significant. However, there was no statistical difference between adsorption capacity for lysozyme and other high-isoelectric point proteins, suggesting that MIPs are semiselective for this class of proteins. In competitive binding experiments, both MIPs and NIPs preferentially bound lysozyme over other high-isoelectric point proteins. This result demonstrated that imprinting alone could not account for the observed selectivity for lysozyme. Analysis of the solvent accessible surface area of lysozyme and its high-isoelectric point competitors revealed why lysozyme is an exceptional binder to the polymer system used in this work, with or without imprinting.

Stimulus-responsive hydrogels: Theory, modern advances, and applications.

Over the past century, hydrogels have emerged as effective materials for an immense variety of applications. The unique network structure of hydrogels enables very high levels of hydrophilicity and biocompatibility, while at the same time exhibiting the soft physical properties associated with living tissue, making them ideal biomaterials. Stimulus-responsive hydrogels have been especially impactful, allowing for unprecedented levels of control over material properties in response to external cues. This enhanced control has enabled groundbreaking advances in healthcare, allowing for more effective treatment of a vast array of diseases and improved approaches for tissue engineering and wound healing. In this extensive review, we identify and discuss the multitude of response modalities that have been developed, including temperature, pH, chemical, light, electro, and shear-sensitive hydrogels. We discuss the theoretical analysis of hydrogel properties and the mechanisms used to create these responses, highlighting both the pioneering and most recent work in all of these fields. Finally, we review the many current and proposed applications of these hydrogels in medicine and industry.

Enzymatic biodegradation of hydrogels for protein delivery targeted to the small intestine.

Multiresponsive poly(methacrylic acid-co-N-vinylpyrrolidone) hydrogels were synthesized with biodegradable oligopeptide crosslinks. The oligopeptide crosslinks were incorporated using EDC-NHS zero-length links between the carboxylic acid groups of the polymer and free primary amines on the peptide. The reaction of the peptide was confirmed by primary amine assay and IR spectroscopy. The microgels exhibited pH-responsive swelling as well as enzyme-catalyzed degradation targeted by trypsin present in the small intestine, as demonstrated upon incubation with gastrointestinal fluids from rats. Relative turbidity was used to evaluate enzyme-catalyzed degradation as a function of time, and initial trypsin concentration controlled both the degradation mechanism as well as the extent of degradation. Trypsin activity was effectively extinguished by incubation at 70 °C, and both the microgels and degradation products posed no cytotoxic effect toward two different cell lines. The microgels demonstrated pH-dependent loading of the protein insulin for oral delivery to the small intestine.

Nanocomposite hydrogels for biomedical applications.

Hydrogels mimic native tissue microenvironment due to their porous and hydrated molecular structure. An emerging approach to reinforce polymeric hydrogels and to include multiple functionalities focuses on incorporating nanoparticles within the hydrogel network. A wide range of nanoparticles, such as carbon-based, polymeric, ceramic, and metallic nanomaterials can be integrated within the hydrogel networks to obtain nanocomposites with superior properties and tailored functionality. Nanocomposite hydrogels can be engineered to possess superior physical, chemical, electrical, and biological properties. This review focuses on the most recent developments in the field of nanocomposite hydrogels with emphasis on biomedical and pharmaceutical applications. In particular, we discuss synthesis and fabrication of nanocomposite hydrogels, examine their current limitations and conclude with future directions in designing more advanced nanocomposite hydrogels for biomedical and biotechnological applications.