RESUMEN
OBJECTIVES: To evaluate bleaching efficacy and oral health-related quality of life (ORHQoL) of three bleaching systems with similar hydrogen peroxide (HP) concentration for up to 6 months post-treatment. MATERIALS AND METHODS: A randomized controlled trial was designed with three parallel groups: group A - in-office 6% HP paint-on varnish; group B - at-home 6% HP with adaptable tray; group C - at-home 16% carbamide peroxide with custom tray. At three different stages (baseline, after bleaching, and 6-month follow-up), ORHQoL was evaluated by the OHIP-14 questionnaire and tooth color of the upper canines and central incisors were measured by two shade guides and a spectrophotometer (measuring CIE L*a*b* with respective color/whiteness differences - ΔE00/ΔWID). Results were presented as mean and 95% confidence intervals and statistical tests were performed appropriately, considering a significance level of α = 0.05. RESULTS: All groups presented significant color differences (P < 0.05) between all stages, with ΔE00/ΔWID surpassing the perceptibility threshold in 98% cases, with group C's results being significantly (P < 0.05) higher when compared to other groups, although with significantly (P < 0.05) higher values of color relapse. Significative ORHQoL improvements (P < 0.05) were detected after bleaching in a global analysis with no differences between techniques. CONCLUSIONS: All techniques presented bleaching efficacy, color stability, and improvements in ORHQoL up to 6 months post-treatment. CLINICAL SIGNIFICANCE: Clinicians may consider both at-home and in-office bleaching techniques with 6% HP to attain long-lasting satisfactory clinical results while producing positive changes in ORHQoL.
Asunto(s)
Blanqueadores Dentales , Blanqueamiento de Dientes , Blanqueamiento de Dientes/métodos , Calidad de Vida , Peróxido de Carbamida , Peróxido de Hidrógeno , Ácido Hipocloroso , Urea , Color , PeróxidosRESUMEN
OBJECTIVES: To investigate the impact of gustatory stimulants of salivary secretion (GSSS) on Sjögren's syndrome patients' self-perception of xerostomia, oral health-related quality of life (OHRQoL) and salivary secretion. METHODS: A total of 110 Sjögren's syndrome patients were randomly allocated to be treated with either a malic acid lozenge or a citric acid mouthwash and then crossed over. Before and after the interventions, the Xerostomia Inventory 5 (SXI-5-PL) and the Oral Health Impact Profile (OHIP-14-PT) questionnaires (both in the Portuguese language) were administered to patients. Unstimulated, mechanical and gustatory-stimulated salivary flows were determined. Repeated measures and between-subject analyses were performed. Statistical significance was set at 5%. RESULTS: After the intervention and within each group, both GSSS elicited a reduction in the SXI-5-PL and OHIP-14-PT scores and an increase in salivary output, significant in the malic acid lozenge group. The malic acid treatment resulted in a greater effect size and percentage improvement than citric acid mouthwash. The malic acid lozenge also produced a significant greater salivary output than the citric acid rising solution. CONCLUSIONS: In Sjögren's syndrome patients, lozenges containing malic acid increased saliva production and xerostomia relief, resulting in improved quality of life.
Asunto(s)
Ácido Cítrico/uso terapéutico , Malatos/uso terapéutico , Antisépticos Bucales/uso terapéutico , Saliva/fisiología , Salivación/efectos de los fármacos , Síndrome de Sjögren/tratamiento farmacológico , Ácido Cítrico/farmacología , Femenino , Humanos , Malatos/farmacología , Masculino , Persona de Mediana Edad , Antisépticos Bucales/farmacología , Calidad de Vida , Síndrome de Sjögren/fisiopatología , Resultado del TratamientoRESUMEN
OBJECTIVE: To evaluate dental prophylaxis influence in tooth color assessment with the use of different methods. MATERIALS AND METHODS: Volunteers were consecutively recruited and screened according to appropriate inclusion/exclusion criteria. Each participant's upper right central incisive and canine color was measured before and after dental prophylaxis with a one-week interval. Tooth color assessment was performed by calibrated operators and the patient using a VITA Classical shade guide and by spectrophotometric methods with a proper device (SpectroShade). Color was reported as mean with SD of Commission Internationale De l'Eclairage (CIE) L*a*b* values, ΔEab and ΔE00 . One-way analysis of variance and Tukey post hoc were performed to assess differences between methods and paired t test for assessing differences in tooth color coordinates after dental prophylaxis. Values of P < .05 were taken as significant. RESULTS: Fifty patients were included. Self-assessed dental prophylaxis effects equated to a significantly different mean ΔE00 value of 2.3 ± 1.7 (P < .01), when compared to the calibrated operator reported 0.8 ± 1.1 and the spectrophotometer 1.0 ± 0.5. Half of volunteer's ΔE00 values surpassed the acceptability threshold, when compared to 28% from investigator and 10% from spectrophotometer. CONCLUSION: Performing a dental prophylaxis did have an influence in tooth color perception with a higher self-perceived effect in the patient assessment. CLINICAL SIGNIFICANCE: The results of this study suggest that performing professional dental prophylaxis presented a perceived effect in tooth color regardless of the method used being that patients precepted whiter and less yellowish teeth. Since extrinsic stain is considered as one of the factors that could influence tooth color assessment, performing professional dental prophylaxis prior to composite or ceramic color selection in anterior teeth restorations could consequently increase treatment predictability.
Asunto(s)
Diente , Cerámica , Color , Profilaxis Dental , Humanos , Coloración de Prótesis , EspectrofotometríaRESUMEN
Health information systems have been developed to help hospital managers steer daily operations, including key performance indicators (KPIs) for monitoring on a time-aggregated basis. Yet, current literature lacks in proposals of productivity dashboards to assist hospitals stakeholders. This research focuses on two related problems: (1) hospital organizations need access to productivity information to improve access to services; and (2) managers need productivity information to optimize resource allocation. This research consists in the development of dashboards to monitor information obtained from a hospital organization to support decision makers. To develop and evaluate the productivity dashboard, the Design Science Research (DSR) methodology was adopted. The dashboard was evaluated by stakeholders of a large Portuguese hospital who contributed to iteratively improving its design toward a useful decision support tool. Additionally, it was ascertained that monitoring productivity needs more study and that the dashboards on these themes are valuable assets at a monitoring level and subsequent decision-making process.
Asunto(s)
Benchmarking , Eficiencia Organizacional , Sistemas de Información en Salud , Sistemas de Apoyo a Decisiones Administrativas , Atención a la Salud , Administración HospitalariaRESUMEN
Left ventricular ejection fraction (LVEF) constitutes an important physiological parameter for the assessment of cardiac function, particularly in the settings of coronary artery disease and heart failure. This study explores the use of routinely and easily acquired variables in the intensive care unit (ICU) to predict severely depressed LVEF following ICU admission. A retrospective study was conducted. We extracted clinical physiological variables derived from ICU monitoring and available within the MIMIC II database and developed a fuzzy model using sequential feature selection and compared it with the conventional logistic regression (LR) model. Maximum predictive performance was observed using easily acquired ICU variables within 6 hours after admission and satisfactory predictive performance was achieved using variables acquired as early as one hour after admission. The fuzzy model is able to predict LVEF ≤ 25% with an AUC of 0.71 ± 0.07, outperforming the LR model, with an AUC of 0.67 ± 0.07. To the best of the authors' knowledge, this is the first study predicting severely impaired LVEF using multivariate analysis of routinely collected data in the ICU. We recommend inclusion of these findings into triaged management plans that balance urgency with resources and clinical status, particularly for reducing the time of echocardiographic examination.
Asunto(s)
Lógica Difusa , Insuficiencia Cardíaca/diagnóstico , Insuficiencia Cardíaca/fisiopatología , Unidades de Cuidados Intensivos , Modelos Teóricos , Volumen Sistólico , Función Ventricular Izquierda , Algoritmos , Biomarcadores , Bases de Datos Factuales , Insuficiencia Cardíaca/etiología , Hemodinámica , Humanos , Admisión del Paciente , Pronóstico , Estudios Retrospectivos , Índice de Severidad de la EnfermedadRESUMEN
Observational, cross-sectional prevalence studies are costly and time-consuming. The development of indirect methods estimating prevalence used to obtain faster, less-expensive, and more robust results would be an advantage for several healthcare applications. This study aimed to use the drug dispensing data from community pharmacies to estimate the prevalence of Type 2 Diabetes mellitus (T2DM) in the Portuguese population. A cross-sectional study was conducted using a database of dispensed medicines with an indication for Diabetes mellitus in 2018 and 2021, stratified by geographic region. The methodology was based on a sequential method of acquiring prevalence estimates obtained through exposure to medicines using the daily doses defined per thousand inhabitants per day and adjusted to the rate of adherence to therapy, prescription patterns, and concomitance of antidiabetic drugs. The estimated overall T2DM prevalence in 2018 was 13.9%, and it was 14.2% for 2021. The results show the increased consumption of antidiabetic drugs, with fixed-dose combination antidiabetics and new antidiabetics being particularly important in 2021. This work allowed for the development of a model to obtain the estimated prevalence of T2DM based on drug consumption, using a simple, fast, and robust method that is in line with the available evidence. However, with the recent expanding indications for new antidiabetics, the inclusion of further data in the model needs to be studied.
RESUMEN
Bioinks play a fundamental role in skin bioprinting, dictating the printing fidelity, cell response, and function of bioprinted 3D constructs. However, the range of bioinks that support skin cells' function and aid in the bioprinting of 3D skin equivalents with tailorable properties and customized shapes is still limited. In this study, we describe a bioinspired design strategy for bioengineering double crosslinked pectin-based bioinks that recapitulate the mechanical properties and the presentation of cell-adhesive ligands and protease-sensitive domains of the dermal extracellular matrix, supporting the bioprinting of bilayer 3D skin models. Methacrylate-modified pectin was used as a base biomaterial enabling hydrogel formation via either chain-growth or step-growth photopolymerization and providing independent control over bioink rheology, as well as the mechanical and biochemical cues of cell environment. By tuning the concentrations of crosslinker and polymer in bioink formulation, dermal constructs were bioprinted with a physiologically relevant range of stiffnesses that resulted in strikingly site-specific differences in the morphology and spreading of dermal fibroblasts. We also demonstrated that the developed thiol-ene photo-clickable bioinks allow for the bioprinting of skin models of varying shapes that support dermis and epidermis reconstruction. Overall, the engineered bioinks expand the range of printable biomaterials for the extrusion bioprinting of 3D cell-laden hydrogels and provide a versatile platform to study the impact of material cues on cell fate, offering potential for in vitro skin modeling.
RESUMEN
There is limited research on the occurrence of microplastics (MPs) in canned seafood. All types of canned seafood investigated in the present study were contaminated. After sample digestion in 30 % hydrogen peroxide, a total of 40 MPs were recovered. Fibers were the most common type, blue was the dominant colour, and Fourier Transform Infrared Spectroscopy (FTIR) identified polyester as the most common polymer. Considering all samples, an average of 3.5 ± 5.2 MPs/can was obtained, with octopus in tomato sauce and tuna in olive oil presenting the highest contamination (5.2 ± 7.5 MPs/can and 5.2 ± 5.1 MPs/can, respectively). Also, significant differences between the number of MPs in the seafood tissues and immersion liquids were verified. The present study demonstrates MPs occurrence in canned seafood, a potential contamination pathway for humans. More research on the different stages of the canning processing is vital for understanding MPs contamination in cans.
Asunto(s)
Contaminación de Alimentos , Microplásticos , Alimentos Marinos , Alimentos Marinos/análisis , Contaminación de Alimentos/análisis , Microplásticos/análisis , Animales , Alimentos en Conserva/análisisRESUMEN
Surface bioconjugation of antimicrobial peptides (AMP) onto nanoparticles (AMP-NP) is a complex, multistep, and time-consuming task. Herein, a microfluidic system for the one-pot production of AMP-NP was developed. Norbornene-modified chitosan was used for NP production (NorChit-NP), and thiolated-AMP was grafted on their surface via thiol-norbornene "photoclick" chemistry over exposure of two parallel UV LEDs. The MSI-78A was the AMP selected due to its high activity against a high priority (level 2) antibiotic-resistant gastric pathogen: Helicobacter pylori (H. pylori). AMP-NP (113 ± 43 nm; zeta potential 14.3 ± 7 mV) were stable in gastric settings without a cross-linker (up to 5 days in pH 1.2) and bactericidal against two highly pathogenic H. pylori strains (1011 NP/mL with 96 µg/mL MSI-78A). Eradication was faster for H. pylori 26695 (30 min) than for H. pylori J99 (24 h), which was explained by the lower minimum bactericidal concentration of soluble MSI-78A for H. pylori 26695 (32 µg/mL) than for H. pylori J99 (128 µg/mL). AMP-NP was bactericidal by inducing H. pylori cell membrane alterations, intracellular reorganization, generation of extracellular vesicles, and leakage of cytoplasmic contents (transmission electron microscopy). Moreover, NP were not cytotoxic against two gastric cell lines (AGS and MKN74, ATCC) at bactericidal concentrations. Overall, the designed microfluidic setup is a greener, simpler, and faster approach than the conventional methods to obtain AMP-NP. This technology can be further explored for the bioconjugation of other thiolated-compounds.
Asunto(s)
Quitosano , Helicobacter pylori , Nanopartículas , Quitosano/farmacología , Quitosano/química , Microfluídica , Antibacterianos/farmacología , Antibacterianos/química , Nanopartículas/química , Norbornanos , Péptidos AntimicrobianosRESUMEN
Skin in vitro models offer much promise for research, testing drugs, cosmetics, and medical devices, reducing animal testing and extensive clinical trials. There are several in vitro approaches to mimicking human skin behavior, ranging from simple cell monolayer to complex organotypic and bioengineered 3-dimensional models. Some have been approved for preclinical studies in cosmetics, pharmaceuticals, and chemicals. However, development of physiologically reliable in vitro human skin models remains in its infancy. This review reports on advances in in vitro complex skin models to study skin homeostasis, aging, and skin disease.
RESUMEN
Stating "how things are done here," organizations are defining their culture. Organizational Culture (OC) is the set of values, norms, goals, and expectations shared by all members of an organization that aids in improving their commitment and performance. On the organizational level, it impacts behavior, productivity, and long-term survival by influencing organizational capability. Due to employee behavior being a competitive differential, this study examines how specific OCs influence individual behavior. In particular, how the different cultures in the Organizational Culture Assessment Instrument (OCAI) affect employees' main dimensions of Organizational Citizenship Behavior (OCB). A descriptive-confirmative ex post facto research was conducted by surveying 513 employees from over 150 organizations worldwide. The Kruskal-Wallis H-test was used to validate our model. The general hypothesis was confirmed, showing that the predominant organizational culture type affects the level and the kind of OCBs individuals demonstrate. It is possible to provide organizations with a breakdown of their employees' OCBs based on their OC type and which changes they can make to their organization's culture to increase the employees' OCB and, consequently, the efficiency of their organization.
RESUMEN
Colour assessment using digital methods can yield varying results, and it is important for clinicians to recognize the potential variability intra and inter-device. This study aimed to compare the L*a*b* values of VITA Classical (VC) and VITA Toothguide 3D-MASTER (VM) guides using two methods, SpectroShade (SS) and eLAB. Thirty-four measurements per tab were performed by a single operator across three batches of each guide. Intraclass correlation coefficients (ICC) between batches were calculated. Values <0.5, 0.5-0.75, 0.75-0.9, and >0.90 were classified as poor, moderate, good, and excellent reliability, respectively. Results were reported as mean and standard deviation of the L*a*b* values and respective colour differences (ΔE00) for each tab and method. Statistical analyses were performed with an independent t-test, α = 0.05. ICC values between batches were excellent for all L*a*b*, except for a* component in eLAB. There were statistically significant differences between methods in most L*a*b* values. The intra-device mean ΔE00 was 0.5 ± 0.6 for VC, 0.5 ± 0.8 for VM in SS, 1.1 ± 0.8 for VC, 1.1 ± 0.9 for VM in eLAB. The mean ΔE00 inter-device was 4.9 ± 1.7 for VC, 5.0 ± 1.7 for VM. Both methods demonstrated good internal consistency, with high ICC values and low intra-device colour differences, but exhibited high variability between methods, higher for a* the component.
RESUMEN
Whitening products commonly utilize hydrogen peroxide (HP) as an active principle, which can penetrate dental tissues with potential side effects due to its low molecular weight. This study aimed to evaluate the HP diffusion of two in-office whitening products, namely 6% VivaStyle Paint On Plus (VS) and Opalescence Boost 40% (OP), in different tooth types. Additionally, the influence of the area of exposure, dental tissue thickness and pulp chamber volume was assessed. Each group consisted of eighteen intact anterior (A), premolar (PM) and molar (M) human teeth, and a positive pulpal pressure model was employed. The samples were analyzed using spectrophotometry, and results were expressed as the mean and 95% confidence interval. Statistical tests and linear regression models were appropriately applied at α = 5%. The total HP (µg) retrieved was as follows: VS-A, 1.333 [1.214, 1.452]; OP-A, 1.538 [1.457, 1.620]; VS-PM, 1.208 [1.123, 1.291]; OP-PM, 3.628 [3.401, 3.855]; VS-M, 2.560 [2.297, 2.823]; and OP-M, 4.197 [3.997, 4.396], with statistically significant differences in diffusion kinetics between whitening products for PM and M. Several HP concentrations attained a minimum cytotoxicity value of 2.22 µg/mL. The regression model shows that OP exposed the pulp chamber to 1.421 µg of HP more than that of VS. Different whitening products can cause cytotoxic HP concentrations in the pulp chamber, with a higher risk observed in molars.
RESUMEN
Conventional cancer therapies, such as radiotherapy and chemotherapy, can have long-term side effects. Phototherapy has significant potential as a non-invasive alternative treatment with excellent selectivity. Nevertheless, its applicability is restricted by the availability of effective photosensitizers and photothermal agents, and its low efficacy when it comes to avoiding metastasis and tumor recurrence. Immunotherapy can promote systemic antitumoral immune responses, acting against metastasis and recurrence; however, it lacks the selectivity displayed by phototherapy, sometimes leading to adverse immune events. The use of metal-organic frameworks (MOFs) in the biomedical field has grown significantly in recent years. Due to their distinct properties, including their porous structure, large surface area, and inherent photo-responsive properties, MOFs can be particularly useful in the fields of cancer phototherapy and immunotherapy. MOF nanoplatforms have successfully demonstrated their ability to address several drawbacks associated with cancer phototherapy and immunotherapy, enabling an effective and low-side-effect combinatorial synergistical treatment for cancer. In the coming years, new advancements in MOFs, particularly regarding the development of highly stable multi-function MOF nanocomposites, may revolutionize the field of oncology.
RESUMEN
Fishes are one of the most important components of the oceans and are exposed to several anthropogenic pressures, namely microplastic (MP), contaminants that are now ubiquitous worldwide. Taking advantage of the 2020 Circumnavigation Expedition carried by the NRP Sagres tall ship of the Portuguese Navy, fish samples from the southern Atlantic ocean were collected to evaluate possible MP contamination. In a total of 14 weeks of campaign, seven large migratory fishes of commercial interest were collected across the middle Atlantic Ocean and along the South American Atlantic coast. All individuals were contaminated with MPs, with an average of 18 ± 11 MPs/fish. In all fish sampled, both the gastrointestinal tract and gills presented MPs, indicating different contamination pathways including via their preys and from surrounding water, respectively. A total of 124 MPs were observed, where 72 % were fibers and 28 % particles, mostly of blue color (85 %), and with rayon and nylon as the most abundant polymers. This study is an important contribution to increase the scientific knowledge of MP contamination in mesopelagic fishes used for human consumption and collected in the open waters, reinforcing the need for further research regarding MP contamination in top predatory species from high trophic levels.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Animales , Humanos , Plásticos , Monitoreo del Ambiente , Contaminantes Químicos del Agua/análisis , Océano Atlántico , PecesRESUMEN
Skin is widely used as a drug delivery route due to its easy access and the possibility of using relatively painless methods for the administration of bioactive molecules. However, the barrier properties of the skin, along with its multilayer structure, impose severe restrictions on drug transport and bioavailability. Thus, bioengineered models aimed at emulating the skin have been developed not only for optimizing the transdermal transport of different drugs and testing the safety and toxicity of substances but also for understanding the biological processes behind skin wounds. Even though in vivo research is often preferred to study biological processes involving the skin, in vitro and ex vivo strategies have been gaining increasing relevance in recent years. Indeed, there is a noticeably increasing adoption of in vitro and ex vivo methods by internationally accepted guidelines. Furthermore, microfluidic organ-on-a-chip devices are nowadays emerging as valuable tools for functional and behavioural skin emulation. Challenges in miniaturization, automation and reliability still need to be addressed in order to create skin models that can predict skin behaviour in a robust, high-throughput manner, while being compliant with regulatory issues, standards and guidelines. In this review, skin models for transdermal transport, wound repair and cutaneous toxicity will be discussed with a focus on high-throughput strategies. Novel microfluidic strategies driven by advancements in microfabrication technologies will also be revised as a way to improve the efficiency of existing models, both in terms of complexity and throughput.
RESUMEN
PURPOSE: To compare the CIE L*a*b* values of two different dental shade guides using two shade-matching spectrophotometers. MATERIALS AND METHODS: SpectroShade Micro (SS) and Easyshade (ES) (VITA Zahnfabrik) were tested. One calibrated operator performed 30 measurements of each tab from three batches of the two guides, VITA Classical (VC) and VITA 3D Shade Master (VM). Receiver operating characteristic (ROC) curves and intraclass coefficients (ICC) between the different batches were calculated. Results were given as mean and SD of the L*a*b* values and the respective color differences according to the CIEDE 2000 formula (ΔE00) for each of the shade tabs in the two spectrophotometers and then analyzed with independent student t test (α = .05). RESULTS: A total of 1,440 and 2,610 measurements for VC and VM, respectively, were performed per spectrophotometer. There were statistically significant differences between the two devices for all L*a*b* values, with the exception of: L* for 3R1.5; a* for 2R1.5, 3L1.5, 2L2.5, 3M2, 3L2.5, 4L1.5, and 4L2.5; and b* for D3, 1M2, and 3M2. When assessing the same shade guide, differences in ΔE00 were detected between devices above the acceptability threshold (AT) (ΔE00 ≥ 1.8) for all shade tabs except for VC (C1, C2, D3, A3.5, C3, and A4) and VM (4M1, 3R2.5, 4L2.5, and 4M3). The overall mean of the interdevice ΔE00 was 2.2 ± 1.0 for VC and 2.5 ± 1.0 for VM. CONCLUSIONS: The two dental spectrophotometers presented high ICC and ROC values, which validates their indication as auxiliary tools. However, there are discrepancies in the hues D (VC) and R (VM) with interdevice variability when evaluated for the L*a*b* component. Int J Prosthodont 2023;36:e38-e52.
Asunto(s)
Diseño de Prótesis Dental , Coloración de Prótesis , Color , Espectrofotometría , ColorimetríaRESUMEN
Melanoma is a potentially fatal cancer with rising incidence over the last 50 years, associated with enhanced sun exposure and ultraviolet radiation. Its incidence is highest in people of European descent and the ageing population. There are multiple clinical and epidemiological variables affecting melanoma incidence and mortality, such as sex, ethnicity, UV exposure, anatomic site, and age. Although survival has improved in recent years due to advances in targeted and immunotherapies, new understanding of melanoma biology and disease progression is vital to improving clinical outcomes. Efforts to develop three-dimensional human skin equivalent models using biofabrication techniques, such as bioprinting, promise to deliver a better understanding of the complexity of melanoma and associated risk factors. These 3D skin models can be used as a platform for patient specific models and testing therapeutics.
RESUMEN
Graphene-based materials (GBM) are considered one of the 21st century's most promising materials, as they are incredibly light, strong, thin and have remarkable electrical and thermal properties. As a result, over the past decade, their combination with a diverse range of synthetic polymers has been explored in tissue engineering (TE) and regenerative medicine (RM). In addition, a wide range of methods for fabricating polymer/GBM scaffolds have been reported. This review provides an overview of the most recent advances in polymer/GBM composite development and fabrication, focusing on methods such as electrospinning and additive manufacturing (AM). As a future outlook, this work stresses the need for more in vivo studies to validate polymer/GBM composite scaffolds for TE applications, and gives insight on their fabrication by state-of-the-art processing technologies.
RESUMEN
Nearly forty years have passed since the term Organizational Citizenship Behavior appeared. Despite a current consensus among scholars about the citizenship gestures as prosocial acts of employees that benefit the organization, it does not apply commonly to the exponential growth of all OCB-related concepts. The concept's expansion has confused the researchers and practitioners, mainly when choosing the most appropriate instruments (constructs) and dimensions to use in their area of interest and context. A systematic literature review was conducted and 420 articles were analyzed. Results point that the trends on OCB-like behaviors goes higher, with an average annual growth rate of new studies of 3.13%. United States (39%) and China (25%) lead but some "under-studied" contexts like Africa, Latin America, the Caribbean, and Oceania start being studied towards OCB. New trends appear in the spectrum of the many different domains and disciplines related to OCB, while leadership and task performance remain the most studied domains and disciplines. In future studies, researchers must freely choose the OCB dimensions and constructs they want to use or adapt to meet their needs and research needs since there is no written rule about their use, only the care to be taken with the context and discipline studying.