Comparison of Injectable Biphasic Calcium Phosphate and a Bovine Xenograft in Socket Preservation: Qualitative and Quantitative Histologic Study in Humans.

This study is the first histologic evaluation of an injectable biphasic calcium phosphate (IBCP) in humans six months after socket preservation according to the principles of guided bone regeneration. After tooth extraction, the alveolar ridge of 21 patients was augmented with IBCP (maxresorb® inject) in the test group, while 20 patients in the control group received a bovine xenograft (BX) (cerabone®). Six months after augmentation, a reentry procedure was performed to collect biopsies of regenerated bone for qualitative and quantitative histologic analysis. A total of 20 biopsies were taken for analysis. Qualitative histologic analysis showed complete integration of the biomaterial and no inflammatory tissue reaction, indicating the biocompatibility of the bone grafts and the surrounding tissue in both groups. Histomorphometric analysis showed comparable results in terms of newly formed bone (IBCP: 26.47 ± 14.71%, BX: 30.47 ± 16.39%) and residual biomaterial (IBCP: 13.1 ± 14.07%, BX: 17.89 ± 11.81%), with no significant difference found across groups (p > 0.05, Mann­Whitney U test). Statistical significance between groups was found in the result of soft tissue percentage (IBCP: 60.43 ± 12.73%, BX: 51.64 ± 14.63%, p = 0.046, Mann­Whitney U test). To conclude, IBCP and BX showed good osteoconductivity and biocompatibility with comparable new bone formation six months after alveolar ridge preservation.

CSBD Healing in Rats after Application of Bovine Xenogeneic Biomaterial Enriched with Magnesium Alloy.

Xenogeneic biomaterials Cerbone® and OsteoBiol® are widely used in oral implantology. In dental practice, xenogeneic biomaterial is usually combined with autologous bone to provide bone volume stability needed for long-term dental implants. Magnesium alloy implants dissolve and form mineral corrosion layer that is directly in contact with bone tissue, allowing deposition of the newly formed bone. CSBD heals by intramembranous ossification and therefore is a convenient model for analyses of ostoconductive and osteoinductive properties of different type of biomaterials. Magnesium alloy-enriched biomaterials have not yet been applied in oral implantology. Therefore, the aim of the current study was to investigate biological properties of potentially new bovine xenogeneic biomaterial enriched with magnesium alloy in a 5 mm CSBD model. Osteoconductive properties of Cerabone®, Cerabone® + Al. bone, and OsteoBiol® were also analyzed. Dynamics of bone healing was followed up on the days 3, 7, 15, 21, and 30. Calvary bone samples were analyzed by micro-CT, and values of the bone morphometric parameters were assessed. Bone samples were further processed for histological and immunohistochemical analyses. Histological observation revealed CSBD closure at day 30 of the given xenogeneic biomaterial groups, with the exception of the control group. TNF-α showed high intensity of expression at the sites of MSC clusters that underwent ossification. Osx was expressed in pre-osteoblasts, which were differentiated into mature osteoblasts and osteocytes. Results of the micro-CT analyses showed linear increase in bone volume of all xenogeneic biomaterial groups and also in the control. The highest average values of bone volume were found for the Cerabone® + Mg group. In addition, less residual biomaterial was estimated in the Cerabone® + Mg group than in the Cerabone® group, indicating its better biodegradation during CSBD healing. Overall, the magnesium alloy xenogeneic biomaterial demonstrated key properties of osteoinduction and biodegradidibility during CSBD healing, which is the reason why it should be recommended for application in clinical practice of oral implantology.

Vertical bone augmentation in a single-tooth gap with an allogenic bone ring: Clinical considerations.

OBJECTIVE: The main objective of this case report is to introduce a one-stage bone block augmentation with a cylindrical freeze-dried bone allograft (FDBA) and simultaneous implantation for the reconstruction of a single-tooth bone defect. CLINICAL CONSIDERATIONS: The report describes this method on the basis of radiographical and clinical images derived from a single patient. CONCLUSIONS: The report demonstrates the time-saving and successful application of this treatment concept, which has the potential to increase patient satisfaction and comfort. CLINICAL SIGNIFICANCE: The application of the presented technique enabled a prosthetic rehabilitation of the extracted tooth about 3 months earlier as compared to the conventional procedure, while demonstrating no compromises regarding clinical outcome, functionality and esthetics.

Guided Bone Regeneration Using a Novel Magnesium Membrane: A Literature Review and a Report of Two Cases in Humans.

Guided bone regeneration (GBR) is a common procedure used to rebuild dimensional changes in the alveolar ridge that occur after extraction. In GBR, membranes are used to separate the bone defect from the underlying soft tissue. To overcome the shortcomings of commonly used membranes in GBR, a new resorbable magnesium membrane has been developed. A literature search was performed via MEDLINE, Scopus, Web of Science and PubMed in February 2023 for research on magnesium barrier membranes. Of the 78 records reviewed, 16 studies met the inclusion criteria and were analyzed. In addition, this paper reports two cases where GBR was performed using a magnesium membrane and magnesium fixation system with immediate and delayed implant placement. No adverse reactions to the biomaterials were detected, and the membrane was completely resorbed after healing. The resorbable fixation screws used in both cases held the membranes in place during bone formation and were completely resorbed. Therefore, the pure magnesium membrane and magnesium fixation screws were found to be excellent biomaterials for GBR, which supports the findings of the literature review.

Synthetic Injectable Biomaterials for Alveolar Bone Regeneration in Animal and Human Studies.

After tooth extraction, the alveolar ridge undergoes dimensional changes. Different bone regeneration biomaterials are used to reduce bone loss. The aim of this article was to systematically review the literature on the effect of injectable synthetic biomaterials and their advantages and disadvantages for new bone formation in the maxilla and mandible in animals and humans. A literature search was conducted in November 2020 via MEDLINE PubMed, Cochrane, and Embase. Of the 501 records screened, abstract analysis was performed on 49 articles, resulting in 21 studies that met the inclusion criteria. Animal studies have shown heterogeneity in terms of animal models, follow-up time, composition of the injectable biomaterial, and different outcome variables such as bone-implant contact, newly formed bone, and peri-implant bone density. Heterogeneity has also been demonstrated by human studies. The following outcomes were observed: newly formed bone, connective tissue, residual injectable bone graft substitute, radiographic density, residual bone height, and different follow-up periods. Further studies, especially in humans, based on the histological and biomechanical properties of the injectable delivery form, are needed to draw more concrete conclusions that will contribute to a better understanding of the benefits of this type of biomaterials and their role in bone regeneration.

Histological and Radiological Features of a Four-Phase Injectable Synthetic Bone Graft in Guided Bone Regeneration: A Case Report.

BACKGROUND AND OBJECTIVE: Injectable synthetic bone grafts (ISBG) are widely used biomaterials for regeneration purposes. The aim of this case report was to examine the efficacy of ISBG in the management of buccal fenestration in the case of a 25-year-old female. CASE REPORT: After a traumatic tooth extraction, the defect was filled with ISBG and covered with a resorbable membrane. The ISBG showed easy handling and the patient had no complications during healing. Six months after augmentation, a bone biopsy was taken during implant bed preparation. The histological results showed good integration of ISBG into the newly formed bone and no signs of tissue inflammation. Additionally, a CBCT (cone beam computed tomography) analysis was performed to support the histological results. CONCLUSION: The use of the examined ISBG led to successful treatment of the buccal fenestration defect.

An introduction to bone tissue engineering.

Bone tissue has the capability to regenerate itself; however, defects of a critical size prevent the bone from regenerating and require additional support. To aid regeneration, bone scaffolds created out of autologous or allograft bone can be used, yet these produce problems such as fast degradation rates, reduced bioactivity, donor site morbidity or the risk of pathogen transmission. The development of bone tissue engineering has been used to create functional alternatives to regenerate bone. This can be achieved by producing bone tissue scaffolds that induce osteoconduction and integration, provide mechanical stability, and either integrate into the bone structure or degrade and are excreted by the body. A range of different biomaterials have been used to this end, each with their own advantages and disadvantages. This review will introduce the requirements of bone tissue engineering, beginning with the regeneration process of bone before exploring the requirements of bone tissue scaffolds. Aspects covered include the manufacturing process as well as the different materials used and the incorporation of bioactive molecules, growth factors and cells.

Effect of different combination of maternal and postnatal diet on adipose tissue morphology in male rat offspring.

PURPOSE: Adipose tissue expansion can occur through several different ways and, under certain conditions, can be connected with chronic inflammation. TNF-α is one of the important cytokines involved in this process. Prolonged inflammation in obesity can lead to obesity-related insulin resistance and tissue dysfunction. The aim of our study was to investigate how different combination of maternal and postnatal diet affects offspring adipose tissue morphology and adipose tissue TNF-α expression. METHODS: Ten female Sprague Dawley rats, 9 weeks old, were randomly divided into two groups and fed either standard laboratory chow or food rich in saturated fatty acids during 6 weeks and then mated with the same male rat. After birth and lactation male rat offspring from both groups were divided into four subgroups depending on the diet they were fed until 22 weeks old. Samples of white adipose tissue were taken from the subcutaneous, epididymal, and perirenal fat pad. On tissue sections, histomorphometric analysis was conducted using CellProfiler program v 2.1.1, and immunohistochemical staining for TNF-α was performed. RESULTS: Greater mean surface area of subcutaneous and epididymal adipocytes was found in groups of male rat offspring with altered diet. In perirenal adipose tissue, the highest number of adipocytes was measured in the group where both mother and offspring were fed a high-fat diet. Adipocyte staining intensity for TNF-α did not differ significantly between the groups. CONCLUSIONS: Together with our previously published data, our results lead to the conclusion that alteration of postnatal diet can lead to TNF-α and adipocyte morphology changes.

Periorbital Reconstruction by "Periorbital Patch" Technique Using a Pericardium-Based Collagen Membrane and Titanium Mesh.

OBJECTIVE: Titanium mesh is a commonly used material for the reconstruction of orbital floor fractures. However, in some instances, a subsequent inflammatory reaction can occur that causes the adhesion of orbital tissue to the titanium mesh. The adhesion of the orbital soft tissue to the mesh causes diplopia, lid rigidity and extraocular movements restriction. This study was performed to determine if the placement of a collagen membrane over a titanium mesh can prevent the adhesion of orbital soft tissue for an improved clinical outcome. Clinical considerations: A case study was performed investigating 106 patients undergoing a periorbital restoration. Seventy-two patients received a titanium mesh without a barrier membrane, 12 patients received a barrier membrane composed of autologous auricular cartilage to provide a barrier function and 22 patients received a pericardium collagen membrane and titanium mesh. CONCLUSIONS: Titanium has been shown to generate an intense inflammatory reaction in host tissues, which can cause fibrosis to adjacent structures. Fibrosis is an essential factor in the repair of fracture sites, however this can lead to adverse effects in the orbital socket. Fibrosis can cause cicatrization and lower eyelid retraction when induced along the lower orbital rim. An improved outcome can be achieved by using a barrier between the titanium mesh and the soft tissue, such as autogenous auricular cartilage, however, only patients treated with a resorbable collagen membrane to act as a soft tissue barricade during site regeneration, prevented the fibrosis reaction and related problems from occurring.

Purification processes of xenogeneic bone substitutes and their impact on tissue reactions and regeneration.

Xenogeneic bone substitute materials are widely used in oral implantology. Prior to their clinical use, purification of the former bone tissue has to be conducted to ensure the removal of immunogenic components and pathogens. Different physicochemical methods are applied for purification of the donor tissue, and temperature treatment is one of these methods. Differences in these methods and especially the application of different temperatures for purification may lead to different material characteristics, which may influence the tissue reactions to these materials and the related (bone) healing process. However, little is known about the different material characteristics and their influences on the healing process. Thus, the aim of this mini-review is to summarize the preparation processes and the related material characteristics, safety aspects, tissue reactions, resorbability and preclinical and clinical data of two widely used xenogeneic bone substitutes that mainly differ in the temperature treatment: sintered (cerabone®) and non-sintered (Bio-Oss®) bovine-bone materials. Based on the summarized data from the literature, a connection between the material-induced tissue reactions and the consequences for the healing processes are presented with the aim of translation into their clinical application.

High-fat diet induced changes in lumbar vertebra of the male rat offsprings.

In obesity, bone marrow adiposity increases and proinflammatory cytokines excretion activates RANK/RANKL/OPG system, which leads to increased bone resorption. The aim of this study was to analyze trabecular and cortical bone parameters in animals exposed to the high-fat diet in utero and after lactation. Skeletal organ of interest was the fifth lumbar vertebra, which is not exposed to biomechanical loading in rats. Further aims were to determine TNF-α and IL-6 serum concentrations, and the intensity of the TNF-α immunohistochemical staining in the bone marrow. Ten female Sprague Dawley rats, nine weeks old, were randomly divided in two groups and fed either standard laboratory chow or food rich in saturated fatty acids during five weeks, and then mated with genetically similar male subjects. After birth and lactation male offsprings from both groups were divided in four subgroups depending on the diet they were fed until twenty-two weeks of age. The highest cholesterol and triglyceride concentration were found in both groups of offsprings fed with high-fat diet. The lowest trabecular bone volume, lowest trabecular number and highest trabecular separation were found in offsprings fed with high-fat diet of mothers on standard laboratory chow. The same group of offsprings was also characterized by the highest intensity of TNF-α immunostaining in the bone marrow and the highest TNF-α serum concentration, which suggest that this proinflammatory cytokine has interfered with bone metabolism, possibly by stimulation of bone resorption, which led to inadequate trabecular bone development and bone modeling of the fifth lumbar vertebra.