Impact of heterozygous ALK1 mutations on the transcriptomic response to BMP9 and BMP10 in endothelial cells from hereditary hemorrhagic telangiectasia and pulmonary arterial hypertension donors.

Heterozygous activin receptor-like kinase 1 (ALK1) mutations are associated with two vascular diseases: hereditary hemorrhagic telangiectasia (HHT) and more rarely pulmonary arterial hypertension (PAH). Here, we aimed to understand the impact of ALK1 mutations on BMP9 and BMP10 transcriptomic responses in endothelial cells. Endothelial colony-forming cells (ECFCs) and microvascular endothelial cells (HMVECs) carrying loss of function ALK1 mutations were isolated from newborn HHT and adult PAH donors, respectively. RNA-sequencing was performed on each type of cells compared to controls following an 18 h stimulation with BMP9 or BMP10. In control ECFCs, BMP9 and BMP10 stimulations induced similar transcriptomic responses with around 800 differentially expressed genes (DEGs). ALK1-mutated ECFCs unexpectedly revealed highly similar transcriptomic profiles to controls, both at the baseline and upon stimulation, and normal activation of Smad1/5 that could not be explained by a compensation in cell-surface ALK1 level. Conversely, PAH HMVECs revealed strong transcriptional dysregulations compared to controls with > 1200 DEGs at the baseline. Consequently, because our study involved two variables, ALK1 genotype and BMP stimulation, we performed two-factor differential expression analysis and identified 44 BMP9-dysregulated genes in mutated HMVECs, but none in ECFCs. Yet, the impaired regulation of at least one hit, namely lunatic fringe (LFNG), was validated by RT-qPCR in three different ALK1-mutated endothelial models. In conclusion, ALK1 heterozygosity only modified the BMP9/BMP10 regulation of few genes, including LFNG involved in NOTCH signaling. Future studies will uncover whether dysregulations in such hits are enough to promote HHT/PAH pathogenesis, making them potential therapeutic targets, or if second hits are necessary.

Targeting of murine leukemia virus gag to the plasma membrane is mediated by PI(4,5)P2/PS and a polybasic region in the matrix.

Membrane targeting of the human immunodeficiency virus Gag proteins is dependent on phosphatidylinositol-(4,5)-bisphosphate [PI(4,5)P(2)] located in the plasma membrane. In order to determine if evolutionarily distant retroviral Gag proteins are targeted by a similar mechanism, we generated mutants of the matrix (MA) domain of murine leukemia virus (MuLV) Gag, examined their binding to membrane models in vitro, and analyzed their phenotypes in cell culture. In vitro, we showed that MA bound all the phosphatidylinositol phosphates with significant affinity but displayed a strong specificity for PI(4,5)P(2) only if enhanced by phosphatidylserine. Mutations in the polybasic region in MA dramatically reduced this affinity. In cells, virus production was strongly impaired by PI(4,5)P(2) depletion under conditions of 5ptaseIV overexpression, and mutations in the MA polybasic region altered Gag localization, membrane binding, and virion production. Our results suggest that the N-terminal polybasic cluster of MA is essential for Gag targeting to the plasma membrane. The binding of the MA domain to PI(4,5)P(2) appears to be a conserved feature among retroviruses despite the fact that the MuLV-MA domain is structurally different from that of human immunodeficiency virus types 1 and 2 and lacks a readily identifiable PI(4,5)P(2) binding cleft.

3D-printed scaffold combined to 2D osteoinductive coatings to repair a critical-size mandibular bone defect.

The reconstruction of large bone defects (12 cm3) remains a challenge for clinicians. We developed a new critical-size mandibular bone defect model on a minipig, close to human clinical issues. We analyzed the bone reconstruction obtained by a 3D-printed scaffold made of clinical-grade polylactic acid (PLA), coated with a polyelectrolyte film delivering an osteogenic bioactive molecule (BMP-2). We compared the results (computed tomography scans, microcomputed tomography scans, histology) to the gold standard solution, bone autograft. We demonstrated that the dose of BMP-2 delivered from the scaffold significantly influenced the amount of regenerated bone and the repair kinetics, with a clear BMP-2 dose-dependence. Bone was homogeneously formed inside the scaffold without ectopic bone formation. The bone repair was as good as for the bone autograft. The BMP-2 doses applied in our study were reduced 20- to 75-fold compared to the commercial collagen sponges used in the current clinical applications, without any adverse effects. Three-dimensional printed PLA scaffolds loaded with reduced doses of BMP-2 may be a safe and simple solution for large bone defects faced in the clinic.

Response of fibroblast activity and polyelectrolyte multilayer films coating titanium.

OBJECTIVES: The study of surface properties is a recent and crucial issue in the biomaterial fields applied to Odontology. The reference biomaterial in dental implantology is titanium. The principal objective is a perfect bio-integration in the oral ecosystem, both in terms of mucosal and bone tissues. The aim of this work was to optimize the tissue-titanium interface by applying polyelectrolyte multilayer films on the surface of titanium. METHODS: The experimental study was undertaken on pure titanium samples. Two types of film ending with polycations or polyanions were selected. Both film types were built with a first poly(ethyleneimine) (PEI) base layer and composed either of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) or of hyaluronic acid (HA) and poly(l-lysine) (PLL) layers. Final architectures were as follows: PEI-(PSS/PAH)(10), or PEI-(PSS/PAH)(10)-PSS, or chemically cross-linked PEI-(HA/PLL)(10) or PEI-(HA/PLL)(10)-HA. An analysis of the physicochemical characteristics of the surfaces was carried out by tensiometry measurements (dynamic contact angle, wettability, contact angle hysteresis) and atomic force microscopy. A biological study with human fibroblasts was followed over a 7-day culture period at days 0, 2, 4 and 7 to observe the cellular response in terms of morphology (scanning electron microscopy) and viability (Mosmann's test). RESULTS: The results showed that polyelectrolyte multilayer films could be successfully deposited onto titanium as previously described for glass or composite. Fibroblast adhesion and proliferation was strongly dependent on film type. SEM observations of cells on the different films agreed with the viability cell test. Furthermore, films containing PSS/PAH generated a better cellular response than films containing cross-linked HA/PLL. CONCLUSION: PSS/PAH polyelectrolyte films coating titanium could represent a new approach for oral bio-integration with great potential for clinical application in the fields of dental implantology. More particularly, the specific biofunctionalization of PSS/PAH films coating titanium could be envisioned by introducing layers of molecules that encourage the bio-integration process between the films.

Polyelectrolyte multilayer film coating and stability at the surfaces of oral prosthesis base polymers: an in vitro and in vivo study.

A new type of coating involving a layer-by-layer technique has been recently reported. This coating is composed of a polyelectrolyte multilayer film that confers specific properties on surfaces to which it is applied. Here, we studied the applicability of such a technique to the coating of oral prostheses, by first testing the construction of polyelectrolyte multilayer films on several polymers used in oral prosthesis bases, and, subsequently, by studying the stability of these coatings in vitro, in human saliva, and in vivo in a rat model. We demonstrated that the multilayered films are able to coat the surfaces of all tested polymers completely, thus increasing their wettability. We also showed that saliva does not degrade the film after 7 days in vitro and after 4 days in vivo. Taken together, our results establish that the layer-by-layer technique is suitable for the coating of oral devices.

Assessment of a polyelectrolyte multilayer film coating loaded with BMP-2 on titanium and PEEK implants in the rabbit femoral condyle.

UNLABELLED: The aim of this study was to evaluate the osseointegration of titanium implants (Ti-6Al-4V, noted here TA6V) and poly(etheretherketone) PEEK implants induced by a BMP-2-delivering surface coating made of polyelectrolyte multilayer films. The in vitro bioactivity of the polyelectrolyte film-coated implants was assessed using the alkaline phosphatase assay. BMP-2-coated TA6V and PEEK implants with a total dose of 9.3µg of BMP-2 were inserted into the femoral condyles of New Zealand white rabbits and compared to uncoated implants. Rabbits were sacrificed 4 and 8weeks after implantation. Histomorphometric analyses on TA6V and PEEK implants and microcomputed tomography on PEEK implants revealed that the bone-to-implant contact and bone area around the implants were significantly lower for the BMP-2-coated implants than for the bare implants. This was confirmed by scanning electron microscopy imaging. This difference was more pronounced at 4weeks in comparison to the 8-week time point. However, bone growth inside the hexagonal upper hollow cavity of the screws was higher in the case of the BMP-2 coated implants. Overall, this study shows that a high dose of BMP-2 leads to localized and temporary bone impairment, and that the dose of BMP-2 delivered at the surface of an implant needs to be carefully optimized. STATEMENT OF SIGNIFICANCE: The presentation of growth factors from material surfaces currently presents significant challenges in academia, clinics and industry. Applying osteoinductive factors to different types of implants, made of metals or polymers, may improve bone repair in difficult situations. Here, we show the effects of an osteoinductive coating made of polyelectrolyte multilayer films on two widely used materials, titanium TA6V alloys and PEEK implants, which were implanted in the rabbit femoral condyle. We show that a too high dose of BMP-2 delivered from the screw surface has a negative short-term effect on bone regeneration in close vicinity of the screw surface. In contrast, bone formation was increased at early times in the empty spaces around the screw. These results highlight the need for future dose-dependence studies on bone formation in response to osteoinductive coatings.

Endothelial cells grown on thin polyelectrolyte mutlilayered films: an evaluation of a new versatile surface modification.

Endothelial cell seeding constitutes an appreciated method to improve blood compatibility of small-diameter vascular grafts. In this study, we report the development of a simple innovative technique based on multilayered polyelectrolyte films as cell adhesive substrates. Polyelectrolyte multilayered films ending by poly(sodium-4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) or poly(L-glutamic acid)/poly(D-lysine) (PGA/PDL) could enhance cell adhesion by modification of the physico-chemical properties of the surface. The biological responses of human umbilical vein endothelial cells seeded on the polyelectrolyte multilayer films, on PDL or PAH monolayers, and on control surfaces, were evaluated in terms of initial attachment, growth, cellular metabolic activity, endothelial phenotype, and adhesion. The results showed that polyelectrolyte multilayers neither induce cytotoxic effects nor alter the phenotype of the endothelial cells. The polyelectrolyte multilayered films enhanced initial cell attachment as compared to the polyelectrolyte monolayer. Cell growth observed on the films was similar to that on TCPS. Among the different coating tested, the film ending by PSS/PAH exhibited an excellent cellular biocompatibility and appeared to be the most interesting surface in terms of cellular adhesion and growth. Such films could be used to cover hydrophobic (cell resistant) substrates in order to promote cell colonization, thereby constituting an excellent material for endothelial cell seeding.

Polyelectrolyte multilayer films with pegylated polypeptides as a new type of anti-microbial protection for biomaterials.

Adhesion of bacteria at the surface of implanted materials is the first step in microbial infection, leading to post-surgical complications. In order to reduce this adhesion, we show that poly(L-lysine)/poly(L-glutamic acid) (PLL/PGA) multilayers ending by several PLL/PGA-g-PEG bilayers can be used, PGA-g-PEG corresponding to PGA grafted by poly(ethylene glycol). Streaming potential and quartz crystal microbalance-dissipation measurements were used to characterize the buildup of these films. The multilayer films terminated by PGA and PGA-g-PEG were found to adsorb an extremely small amount of serum proteins as compared to a bare silica surface but the PGA ending films do not reduce bacterial adhesion. On the other hand, the adhesion of Escherichia coli bacteria is reduced by 72% on films ending by one (PLL/PGA-g-PEG) bilayer and by 92% for films ending by three (PLL/PGA-g-PEG) bilayers compared to bare substrate. Thus, our results show the ability of PGA-g-PEG to be inserted into multilayer films and to drastically reduce both protein adsorption and bacterial adhesion. This kind of anti-adhesive films represents a new and very simple method to coat any type of biomaterials for protection against bacterial adhesion and therefore limiting its pathological consequences.

Blood low shear rate rheometry: influence of fibrinogen level and hematocrit on slip and migrational effects.

Red blood cell (RBC) aggregation is of prime importance in vivo and in vitro for low flow rates. It may be estimated by rheometrical measurements at low shear rates, but these are perturbed by slip and migrational effects which have already been highlighted in the past. These effects lead to a torque decay with time so that the true value of the stress at low shear rates may be greatly underestimated. Elevated aggregation being associated with different diseases, pathological blood samples show more pronounced perturbing effects and a strong time dependency in low shear rate rheometry. To test the dependence of slip and migrational effects on RBC aggregation, and particularly to determine the way in which they depend upon fibrinogen concentration ([Fb]), a home-made measuring system with roughened internal and external walls (170 microns roughness) was used to study low shear rate rheometry for RBC suspensions in PBS buffer containing albumin (at 50 g/l) and fibrinogen at various concentrations. The influences of hematocrit, shear rate, and fibrinogen concentration were investigated. Particular attention was paid to data acquisition at low shear rates (10(-3) s-1 to 3 x 10(-2) s-1). The combined influence of hematocrit and fibrinogen was investigated by adjusting hematocrit to 44 or 57% and fibrinogen concentration ([Fb]) to 3.0-4.5-6.5 g/l. Microscopic observations of the blood samples at rest were performed. They showed that different structures were formed according to fibrinogen concentration. The rheometrical measurements indicated that torque decay with shearing duration was strongly dependent on fibrinogen concentration and on shear rate at fixed hematocrit. Migrational and slip effects were more pronounced as shear rate decreased, fibrinogen concentration was raised, and hematocrit was lowered. The results have been explained on the basis of the expected microstructure of flowing blood in relation to the microscopic observations at rest.

Modeling of the detachment of a molecule from a surface: illustration of the "Bell-Evans effect".

This article deals with the modeling of the detachment of a molecule initially adsorbed on a surface and submitted to an external force whose strength increases with time. By means of an atomic force microscope (AFM), it is possible to measure the force when the molecule separates from the substrate. However, it is known that this force depends to a large extend on the rate at which the pulling force is applied ("Bell-Evans effect"). Two models are described to illustrate this behavior. First, a random walk approach is suggested to reveal the fundamental principle of the escape over a time-dependent energy barrier. Second, a multi bead-and-spring model is proposed to mimic the AFM experiment and numerical simulations, based on Brownian dynamics, are performed.

Systemic sclerosis: blood rheometry and laser Doppler imaging of digital cutaneous microcirculation during local cold exposure.

A combined study of microcirculation hemodynamics in vivo and blood rheometry has been carried out in patients with scleroderma compared to primary Raynaud's phenomenon (PRP) and healthy controls (HC). Laser Doppler perfusion imaging was used to assess superficial skin blood flow in the fingers before, during and after local cold exposure. Blood viscosity was measured at 19 and 37 degrees C. Dynamic and transient flows were also investigated. The scleroderma group showed a significantly lower level of perfusion before the cold test, that was further decreased during and after cold exposure, the difference with PRP being maximal during the rewarming period. It also showed a significantly increased viscosity (p < 0.05) at low shear rates. Hemorheological behavior of the PRP group was similar to the HC group. A significant negative correlation between the LDI perfusion and the apparent blood viscosity at low shear rates was found for the whole population. These findings suggest that rheological factors may be involved in the abnormal cold reactivity of patients with scleroderma.

[Morphometric analysis of erythrocyte aggregates in vitro: pharmacological application with buflomedil]. / Analyse morphométrique des agrégats érythrocytaires in vitro. Application pharmacologique au Buflomedil.

Erythrocyte aggregation is usually evaluated through indirect measurements such as the sedimentation rate and rheometric measurements of aggregation and disaggregation thresholds. The aim of this study was a preliminary evaluation of a morphometric approach of aggregates in vitro. A sample of blood (on EDTA) was examined under the microscope, and a picture with magnification X 640 was obtained after stabilization of the cellular structure. The digital image was analyzed with a home made dedicated software that allows the measurement of the cellular density and the evaluation of several shape parameters. Ten samples obtained from different donors were analysed within one hour after blood withdrawal and 24 hours later (preservation temperature: 4 degrees C), with and without adjunction of Buflomedil (4 microg/ml). Results showed an important anti-aggregant effect of Buflomedil administrated in these conditions, both on fresh and preserved blood (p<10(-3)). These results illustrate the potential interest of a morphometric approach to erythrocyte aggregation. They show new pharmacological properties of Buflomedil administered in vitro, which have to be confirmed with a therapeutic administration of the compound.

Threshold of shear stress in human blood for healthy and sick subjects. / Etude du seuil de contrainte du sang humain pour des sujets sains et pathologiques.

It is now well recognized that blood is a yield stress fluid, that is to say that it will not flow below a critical threshold level of stress. This is reflected in vivo with a cessation of flow threshold, of great importance in circulatory physiology and pathophysiology. Values for yield stress obtained by different techniques are scarce. Rheometry at low shear rates is one method of obtaining values. After mitigating the slip effects on the walls of the rheometer, it has been possible to get an approximate value of the yield stress in human blood samples in controls and in ill subjects with different hematocrits. A Low Shear 40 rheometer with a controlled rotation speed was used. Home made geometries were used and the shear rate was varied in the range 10(-3) s-1-100 s-1. Fresh blood samples from healthy donors and patients were anticoagulated with EDTA. Suspensions of red cells in plasma were prepared by removing plasma. The measurements were made at 25 degrees C within four hours following blood sampling. Particular attention was paid to data acquisition at low shear rates (10(-3) s-1, 3.10(-3) s-1, 10(-2) s-1, 3.10(-2) s-1) with a computer linked to the rheometer. Shear stress approached a constant value at low shear rates for geometries with rough surfaces. Shear stress measured at 10(-3) s-1 was taken as an approximation of yield stress. Values were 5 to 6 mPa for hematocrit 60% and 20 to 25 mPa for hematocrit in the 80 to 90% range. For pathological blood samples, accurate measurements were made at shear rate as low as 0.01 s-1. Migrational effects were present at 10(-1) s-1 et 3.10(-3) s-1 but they could be greatly mitigated by the use of the 170 microns surface roughness.

Influences of adhesion area and biological sample size on the estimation of Young's modulus and Poisson's ratio assessed by micropipette aspiration technique.

The micropipette aspiration experiment remains a widely used micromanipulation technique for quantifying the mechanical properties of biological samples. Our study extends previous results by investigating the influence of sample size and adhesion area on the mechanical response of compressible thin biological samples. We thus defined a nonlinear relationship between aspirated length, Young's modulus, Poisson's ratio and sample thickness which allowed us to develop an original experimental protocol for simultaneous quantification of the Poisson's ratio and Young's modulus of adherent samples. We first validated our method by characterizing mechanical properties of polyacrylamide gels with tunable stiffness. We then considered application of these results to the quantification of cell elasticity, focusing on the influence of cell adhesion area onto the measured apparent cell stiffness.

Actin protofilament orientation at the erythrocyte membrane.

The short actin filaments in the erythrocyte's membrane skeleton are shown to be largely oriented tangent to the lipid bilayer. Actin "proto"-filaments have previously been described as junctional centers intertriangulated by spectrin; however, the protofilaments may simultaneously serve as pinning centers between the network and the overlying bilayer. The latter function now seems of particular importance because near-normal network assembly has been reported with transgenic mouse sphero-erythrocytes that lack the primary linkage protein Band 3. To assess possible physical constraints on actin protofilaments in intact membranes, fluorescence polarization microscopy (FPM) has been used to study rhodamine phalloidin-labeled red cell ghosts. A basis for interpreting FPM images of cells is provided by FPM applied to isolated actin filaments. These are labeled with the same rhodamine probes and imaged at various orientations with respect to the polarizers, including filament orientations perpendicular to the image plane. High aperture and fluorophore conjugation effects are found to be minimal, enabling development of a simple, semi-empirical model which indicates that protofilaments are generally within approximately 20 degrees of the membrane tangent plane.

Actin protofilament orientation in deformation of the erythrocyte membrane skeleton.

The red cell's spectrin-actin network is known to sustain local states of shear, dilation, and condensation, and yet the short actin filaments are found to maintain membrane-tangent and near-random azimuthal orientations. When calibrated with polarization results for single actin filaments, imaging of micropipette-deformed red cell ghosts has allowed an assessment of actin orientations and possible reorientations in the network. At the hemispherical cap of the aspirated projection, where the network can be dilated severalfold, filaments have the same membrane-tangent orientation as on a relatively unstrained portion of membrane. Likewise, over the length of the network projection pulled into the micropipette, where the network is strongly sheared in axial extension and circumferential contraction, actin maintains its tangent orientation and is only very weakly aligned with network extension. Similar results are found for the integral membrane protein Band 3. Allowing for thermal fluctuations, we deduce a bound for the effective coupling constant, alpha, between network shear and azimuthal orientation of the protofilament. The finding that alpha must be about an order of magnitude or more below its tight-coupling value illustrates how nanostructural kinematics can decouple from more macroscopic responses. Monte Carlo simulations of spectrin-actin networks at approximately 10-nm resolution further support this conclusion and substantiate an image of protofilaments as elements of a high-temperature spin glass.

Muscle cell peeling from micropatterned collagen: direct probing of focal and molecular properties of matrix adhesion.

To quantitatively elucidate attributes of myocyte-matrix adhesion, muscle cells were controllably peeled from narrow strips of collagen-coated glass. Initial growth of primary quail myoblasts on collagen strips was followed by cell alignment, elongation and end-on fusion between neighbors. This geometric influence on differentiation minimized lateral cell contact and cell branching, enabling detailed study of myocyte-matrix adhesion. A micropipette was used to pull back one end of a quasi-cylindrical cell while observing in detail the non-equilibrium detachment process. Peeling velocities fluctuated as focal roughness, microm in scale, was encountered along the detachment front. Nonetheless, mean peeling velocity ( microm/second) generally increased with detachment force (nN), consistent with forced disruption of adhesion bonds. Immunofluorescence of beta1-integrins correlated with the focal roughness and appeared to be clustered in axially extended focal contacts. In addition, the peeling forces and rates were found to be moderately well described by a dynamical peeling model for receptor-based adhesion (Dembo, M., Torney, D. C., Saxman, K. and Hammer, D. (1988). Proc. R. Soc. Lond. B 234, 55-83). Estimates were thereby obtained for the spontaneous, molecular off-rate (kooff, (less than or equal to)10/seconds) and the receptor complex stiffness (kappa, approx. 10(-5)-10(-6) N/m) of adherent myocytes. Interestingly, the local stiffness is within the range of flexible proteins of the spectrin superfamily. The overall approach lends itself to elucidating the developing function of other structural and adhesive components of cells, particularly skeletal muscle cells with specialized components, such as the spectrin-homolog dystrophin and its membrane-linked receptor dystroglycan.