Biochemical and structural characterization of a sphingomonad diarylpropane lyase for cofactorless deformylation.

Lignin valorization is being intensely pursued via tandem catalytic depolymerization and biological funneling to produce single products. In many lignin depolymerization processes, aromatic dimers and oligomers linked by carbon-carbon bonds remain intact, necessitating the development of enzymes capable of cleaving these compounds to monomers. Recently, the catabolism of erythro-1,2-diguaiacylpropane-1,3-diol (erythro-DGPD), a ring-opened lignin-derived ß-1 dimer, was reported in Novosphingobium aromaticivorans. The first enzyme in this pathway, LdpA (formerly LsdE), is a member of the nuclear transport factor 2 (NTF-2)-like structural superfamily that converts erythro-DGPD to lignostilbene through a heretofore unknown mechanism. In this study, we performed biochemical, structural, and mechanistic characterization of the N. aromaticivorans LdpA and another homolog identified in Sphingobium sp. SYK-6, for which activity was confirmed in vivo. For both enzymes, we first demonstrated that formaldehyde is the C1 reaction product, and we further demonstrated that both enantiomers of erythro-DGPD were transformed simultaneously, suggesting that LdpA, while diastereomerically specific, lacks enantioselectivity. We also show that LdpA is subject to a severe competitive product inhibition by lignostilbene. Three-dimensional structures of LdpA were determined using X-ray crystallography, including substrate-bound complexes, revealing several residues that were shown to be catalytically essential. We used density functional theory to validate a proposed mechanism that proceeds via dehydroxylation and formation of a quinone methide intermediate that serves as an electron sink for the ensuing deformylation. Overall, this study expands the range of chemistry catalyzed by the NTF-2-like protein family to a prevalent lignin dimer through a cofactorless deformylation reaction.

Initiation of fatty acid biosynthesis in Pseudomonas putida KT2440.

Deciphering the mechanisms of bacterial fatty acid biosynthesis is crucial for both the engineering of bacterial hosts to produce fatty acid-derived molecules and the development of new antibiotics. However, gaps in our understanding of the initiation of fatty acid biosynthesis remain. Here, we demonstrate that the industrially relevant microbe Pseudomonas putida KT2440 contains three distinct pathways to initiate fatty acid biosynthesis. The first two routes employ conventional ß-ketoacyl-ACP synthase III enzymes, FabH1 and FabH2, that accept short- and medium-chain-length acyl-CoAs, respectively. The third route utilizes a malonyl-ACP decarboxylase enzyme, MadB. A combination of exhaustive in vivo alanine-scanning mutagenesis, in vitro biochemical characterization, X-ray crystallography, and computational modeling elucidate the presumptive mechanism of malonyl-ACP decarboxylation via MadB. Given that functional homologs of MadB are widespread throughout domain Bacteria, this ubiquitous alternative fatty acid initiation pathway provides new opportunities to target a range of biotechnology and biomedical applications.

Collagenolytic matrix metalloproteinases antagonize proteinase-activated receptor-2 activation, providing insights into extracellular matrix turnover.

The collagenase subfamily of matrix metalloproteinases (MMPs) have important roles in the remodeling of collagenous matrices. The proteinase-activated receptor (PAR) family has a unique mechanism of activation requiring proteolysis of an extracellular domain forming a neo-N terminus that acts as a tethered ligand, a process that has been associated with the development of arthritis. Canonical PAR2 activation typically occurs via a serine proteinase at Arg36-Ser37, but other proteinases can cleave PARs downstream of the tethered ligand and "disarm" the receptor. To identify additional cleavage sites within PAR2, we synthesized a 42-amino-acid peptide corresponding to the extracellular region. We observed that all three soluble MMP collagenases, MMP-1, MMP-8, and MMP-13, cleave PAR2 and discovered a novel cleavage site (Ser37-Leu38). Metalloproteinases from resorbing bovine nasal cartilage and recombinant human collagenases could cleave a quenched fluorescent peptide mimicking the canonical PAR2 activation region, and kinetic constants were determined. In PAR2-overexpressing SW1353 chondrocytes, we demonstrated that the activator peptide SLIGKV-NH2 induces rapid calcium flux, inflammatory gene expression (including MMP1 and MMP13), and the phosphorylation of extracellular signal-regulated kinase (ERK) and p38 kinase. The corresponding MMP cleavage-derived peptide (LIGKVD-NH2) exhibited no canonical activation; however, we observed phosphorylation of ERK, providing evidence of biased agonism. Importantly, we demonstrated that preincubation with active MMP-1 reduced downstream PAR2 activation by a canonical activator, matriptase, but not SLIGKV-NH2 These results support a role for collagenases as proteinases capable of disarming PAR2, revealing a mechanism that suppresses PAR2-mediated inflammatory responses.

High-density functional-RNA arrays as a versatile platform for studying RNA-based interactions.

We are just beginning to unravel the myriad of interactions in which non-coding RNAs participate. The intricate RNA interactome is the foundation of many biological processes, including bacterial virulence and human disease, and represents unexploited resources for the development of potential therapeutic interventions. However, identifying specific associations of a given RNA from the multitude of possible binding partners within the cell requires robust high-throughput systems for their rapid screening. Here, we present the first demonstration of functional-RNA arrays as a novel platform technology designed for the study of such interactions using immobilized, active RNAs. We have generated high-density RNA arrays by an innovative method involving surface-capture of in vitro transcribed RNAs. This approach has significant advantages over existing technologies, particularly in its versatility in regards to binding partner character. Indeed, proof-of-principle application of RNA arrays to both RNA-small molecule and RNA-RNA pairings is demonstrated, highlighting their potential as a platform technology for mapping RNA-based networks and for pharmaceutical screening. Furthermore, the simplicity of the method supports greater user-accessibility over currently available technologies. We anticipate that functional-RNA arrays will find broad utility in the expanding field of RNA characterization.

Inhibition of homologous phosphorolytic ribonucleases by citrate may represent an evolutionarily conserved communicative link between RNA degradation and central metabolism.

Ribonucleases play essential roles in all aspects of RNA metabolism, including the coordination of post-transcriptional gene regulation that allows organisms to respond to internal changes and environmental stimuli. However, as inherently destructive enzymes, their activity must be carefully controlled. Recent research exemplifies the repertoire of regulatory strategies employed by ribonucleases. The activity of the phosphorolytic exoribonuclease, polynucleotide phosphorylase (PNPase), has previously been shown to be modulated by the Krebs cycle metabolite citrate in Escherichia coli. Here, we provide evidence for the existence of citrate-mediated inhibition of ribonucleases in all three domains of life. In silico molecular docking studies predict that citrate will bind not only to bacterial PNPases from E. coli and Streptomyces antibioticus, but also PNPase from human mitochondria and the structurally and functionally related archaeal exosome complex from Sulfolobus solfataricus. Critically, we show experimentally that citrate also inhibits the exoribonuclease activity of bacterial, eukaryotic and archaeal PNPase homologues in vitro. Furthermore, bioinformatics data, showing key citrate-binding motifs conserved across a broad range of PNPase homologues, suggests that this regulatory mechanism may be widespread. Overall, our data highlight a communicative link between ribonuclease activity and central metabolism that may have been conserved through the course of evolution.

Concentration-Dependent Inhibition of Mesophilic PETases on Poly(ethylene terephthalate) Can Be Eliminated by Enzyme Engineering.

Enzyme-based depolymerization is a viable approach for recycling of poly(ethylene terephthalate) (PET). PETase from Ideonella sakaiensis (IsPETase) is capable of PET hydrolysis under mild conditions but suffers from concentration-dependent inhibition. In this study, this inhibition is found to be dependent on incubation time, the solution conditions, and PET surface area. Furthermore, this inhibition is evident in other mesophilic PET-degrading enzymes to varying degrees, independent of the level of PET depolymerization activity. The inhibition has no clear structural basis, but moderately thermostable IsPETase variants exhibit reduced inhibition, and the property is completely absent in the highly thermostable HotPETase, previously engineered by directed evolution, which simulations suggest results from reduced flexibility around the active site. This work highlights a limitation in applying natural mesophilic hydrolases for PET hydrolysis and reveals an unexpected positive outcome of engineering these enzymes for enhanced thermostability.

The interface between catalytic and hemopexin domains in matrix metalloproteinase-1 conceals a collagen binding exosite.

Matrix metalloproteinase-1 (MMP-1) is an instigator of collagenolysis, the catabolism of triple helical collagen. Previous studies have implicated its hemopexin (HPX) domain in binding and possibly destabilizing the collagen substrate in preparation for hydrolysis of the polypeptide backbone by the catalytic (CAT) domain. Here, we use biophysical methods to study the complex formed between the MMP-1 HPX domain and a synthetic triple helical peptide (THP) that encompasses the MMP-1 cleavage site of the collagen α1(I) chain. The two components interact with 1:1 stoichiometry and micromolar affinity via a binding site within blades 1 and 2 of the four-bladed HPX domain propeller. Subsequent site-directed mutagenesis and assay implicates blade 1 residues Phe(301), Val(319), and Asp(338) in collagen binding. Intriguingly, Phe(301) is partially masked by the CAT domain in the crystal structure of full-length MMP-1 implying that transient separation of the domains is important in collagen recognition. However, mutation of this residue in the intact enzyme disrupts the CAT-HPX interface resulting in a drastic decrease in binding activity. Thus, a balanced equilibrium between these compact and dislocated states may be an essential feature of MMP-1 collagenase activity.

Comparative Performance of PETase as a Function of Reaction Conditions, Substrate Properties, and Product Accumulation.

There is keen interest to develop new technologies to recycle the plastic poly(ethylene terephthalate) (PET). To this end, the use of PET-hydrolyzing enzymes has shown promise for PET deconstruction to its monomers, terephthalate (TPA) and ethylene glycol (EG). Here, the Ideonella sakaiensis PETase wild-type enzyme was compared to a previously reported improved variant (W159H/S238F). The thermostability of each enzyme was compared and a 1.45 Šresolution structure of the mutant was described, highlighting changes in the substrate binding cleft compared to the wild-type enzyme. Subsequently, the performance of the wild-type and variant enzyme was compared as a function of temperature, substrate morphology, and reaction mixture composition. These studies showed that reaction temperature had the strongest influence on performance between the two enzymes. It was also shown that both enzymes achieved higher levels of PET conversion for substrates with moderate crystallinity relative to amorphous substrates. Finally, the impact of product accumulation on reaction progress was assessed for the hydrolysis of both PET and bis(2-hydroxyethyl) terephthalate (BHET). Each enzyme displayed different inhibition profiles to mono(2-hydroxyethyl) terephthalate (MHET) and TPA, while both were sensitive to inhibition by EG. Overall, this study highlights the importance of reaction conditions, substrate selection, and product accumulation for catalytic performance of PET-hydrolyzing enzymes, which have implications for enzyme screening in the development of enzyme-based polyester recycling.

Comparative Performance of PETase as a Function of Reaction Conditions, Substrate Properties, and Product Accumulation.

Invited for this month's cover is the BOTTLE Consortium, featuring Gregg Beckham's laboratory from NREL and John McGeehan's laboratory from the University of Portsmouth. The cover image shows the application of poly(ethylene terephthalate) (PET) hydrolase enzymes on post-consumer waste plastic, towards the development of an enzymatic PET recycling strategy. The Full Paper itself is available at 10.1002/cssc.202101932.

Sourcing thermotolerant poly(ethylene terephthalate) hydrolase scaffolds from natural diversity.

Enzymatic deconstruction of poly(ethylene terephthalate) (PET) is under intense investigation, given the ability of hydrolase enzymes to depolymerize PET to its constituent monomers near the polymer glass transition temperature. To date, reported PET hydrolases have been sourced from a relatively narrow sequence space. Here, we identify additional PET-active biocatalysts from natural diversity by using bioinformatics and machine learning to mine 74 putative thermotolerant PET hydrolases. We successfully express, purify, and assay 51 enzymes from seven distinct phylogenetic groups; observing PET hydrolysis activity on amorphous PET film from 37 enzymes in reactions spanning pH from 4.5-9.0 and temperatures from 30-70 °C. We conduct PET hydrolysis time-course reactions with the best-performing enzymes, where we observe differences in substrate selectivity as function of PET morphology. We employed X-ray crystallography and AlphaFold to examine the enzyme architectures of all 74 candidates, revealing protein folds and accessory domains not previously associated with PET deconstruction. Overall, this study expands the number and diversity of thermotolerant scaffolds for enzymatic PET deconstruction.

Implications for collagen binding from the crystallographic structure of fibronectin 6FnI1-2FnII7FnI.

Collagen and fibronectin (FN) are two abundant and essential components of the vertebrate extracellular matrix; they interact directly with cellular receptors and affect cell adhesion and migration. Past studies identified a FN fragment comprising six modules, (6)FnI(1-2)FnII(7-9)FnI, and termed the gelatin binding domain (GBD) as responsible for collagen interaction. Recently, we showed that the GBD binds tightly to a specific site within type I collagen and determined the structure of domains (8-9)FnI in complex with a peptide from that site. Here, we present the crystallographic structure of domains (6)FnI(1-2)FnII(7)FnI, which form a compact, globular unit through interdomain interactions. Analysis of NMR titrations with single-stranded collagen peptides reveals a dominant collagen interaction surface on domains (2)FnII and (7)FnI; a similar surface appears involved in interactions with triple-helical peptides. Models of the complete GBD, based on the new structure and the (8-9)FnI·collagen complex show a continuous putative collagen binding surface. We explore the implications of this model using long collagen peptides and discuss our findings in the context of FN interactions with collagen fibrils.

Design and structure of stapled peptides binding to estrogen receptors.

Synthetic peptides that specifically bind nuclear hormone receptors offer an alternative approach to small molecules for the modulation of receptor signaling and subsequent gene expression. Here we describe the design of a series of novel stapled peptides that bind the coactivator peptide site of estrogen receptors. Using a number of biophysical techniques, including crystal structure analysis of receptor-stapled peptide complexes, we describe in detail the molecular interactions and demonstrate that all-hydrocarbon staples modulate molecular recognition events. The findings have implications for the design of stapled peptides in general.

Tuning the matrix metalloproteinase-1 degradability of peptide amphiphile nanofibers through supramolecular engineering.

Matrix metalloproteinases (MMPs) are a family of endopeptidases capable of degrading extracellular matrix (ECM) components. They are known to play crucial roles during the ECM turnover in both physiological and pathological processes. As such, their activities are utilized as biological stimuli to engineer MMP-responsive peptide-based biomaterials such as self-assembled peptide amphiphiles (PAs). Although previous studies have unveiled the role of PAs secondary structure on the mechanical and biological properties of their self-assembled nanostructures, the effect on the degradability of their assemblies by MMP-1 has not been reported. Herein, a series of PAs are designed and synthesized, all comprising the same MMP-1 cleavable domain but with variable structural segments, to decipher the role of PA's secondary structure on the MMP-1 degradability of their assemblies. This study reveals a correlation between the MMP-1 degradation efficiency and the ß-sheet content of the self-assembled PA nanofibers, with the MMP-1 cleavability being significantly reduced in the PA nanofibers with stronger ß-sheet characteristics. These results shed light on the role of supramolecular cohesion in PA assemblies on their hydrolysis by MMP-1 and open up the possibility to control the degradation rate of PA-based nanostructures by MMP-1 through tweaking their molecular sequences.

Application of mRNA Arrays for the Production of mCherry Reporter-Protein Arrays for Quantitative Gene Expression Analysis.

The development of programmable regulators that precisely and predictably control gene expression is a major goal of synthetic biology. Consequently, rapid high-throughput biochemical methods capable of quantitatively analyzing all components of gene expression would be of value in the characterization and optimization of regulator performance. In this study we demonstrate a novel application of RNA arrays, involving the production of reporter-protein arrays, to gene expression analysis. This method enables simultaneous quantification of both the transcription and post-transcription/translation components of gene expression, and it also allows the assessment of the orthogonality of multiple regulators. We use our method to directly compare the performance of a series of previously characterized synthetic post-transcriptional riboregulators, thus demonstrating its utility in the development of synthetic regulatory modules and evaluation of gene expression regulation in general.

Using Small Angle X-Ray Scattering (SAXS) to Characterize the Solution Conformation and Flexibility of Matrix Metalloproteinases (MMPs).

Small angle X-ray scattering (SAXS) provides information about the conformation and flexibility of proteins in solution, and hence provides complementary structural information to that obtained from X-ray crystallography and nuclear magnetic resonance spectroscopy. In this chapter, we describe the methods for the preparation of matrix metalloproteinase (MMP) samples for SAXS analyses, and for the acquisition, processing and interpretation of the SAXS data.

Structural insight into binding of Staphylococcus aureus to human fibronectin.

Staphylococcus aureus possesses cell-wall attached proteins that bind the human protein fibronectin (Fn). An intermodule interface between the 4F1 and 5F1 modules in the N-terminal domain of Fn is maintained on bacterial peptide binding but there is a small change in the intermodule orientation and alignment of beta-strands that are predicted to bind the peptide. The module pair is elongated, as in the unbound state. Combined with evidence that residues in both 4F1 and 5F1 are directly involved in peptide binding, this observation supports the hypothesis that, when bound to intact Fn, the bacterial protein adopts an unusual, highly extended conformation.

Gelatin binding to the 8F19F1 module pair of human fibronectin requires site-specific N-glycosylation.

The gelatin (denatured collagen) binding domain of the extracellular matrix protein fibronectin contains three potential N-glycosylation sites. Complete deglycosylation of this domain is known to reduce the thermal stability of the eighth type 1 (8F1) module. We have conducted a site-specific analysis of the structural and functional consequences of N-linked glycosylation in the 8F19F1 module pair. Three glycoforms have been identified by mass spectrometry and nuclear magnetic resonance spectroscopy. Chemical shift differences between the glycoforms have revealed an intimate interaction between one N-linked sugar and the polypeptide that is critical for gelatin binding, as shown by affinity chromatography.

Development of an assay for the quantification of type I collagen synthesis in the guinea pig.

There is a need for a reliable assay for the quantification of collagen type I synthesis in the guinea pig, an important model for many connective tissue diseases. Procollagen type I C-terminal propeptide (PICP) is the established marker of type I collagen synthesis but, to date, no assay has been developed to measure PICP in guinea pig tissue extracts. A monoclonal antibody, known to cross-react with intact guinea pig procollagen type I (anti-PICP), was tested for its ability to bind soluble guinea pig PICP in crude skin extracts using a biosensor. Anti-PICP was immobilised to the surface of a sensor chip and antibody-antigen binding was detected using the phenomenon of surface plasmon resonance (SPR). The binding component in the SPR-immunoassay was identified as PICP by purification and N-terminal sequencing. Guinea pig PICP was purified from skin by gel filtration, ion exchange chromatography and lectin affinity chromatography. Purified PICP was then biotinylated and used with anti-PICP to develop a competition ELISA that was able to selectively and sensitively measure PICP in extracts of guinea pig connective tissue.

The gentle grip of a helping hand.

Using NMR spectroscopy, Zhao and colleagues, in this issue, have modeled the short-lived complex formed between the MT1-MMP hemopexin domain and a synthetic triple-helical collagen mimetic. Their model is consistent with two alternative mechanisms for the breakdown of collagen by the enzyme.

Isotopic labeling of recombinant proteins from the methylotrophic yeast Pichia pastoris.

The methylotrophic yeast Pichia pastoris is now an established expression system for the production of recombinant protein for nuclear magnetic resonance (NMR) studies. It is capable of expressing high levels of heterologous proteins and possesses the ability to perform many of the posttranslational modifications of higher eukaryotes. Here, we describe efficient methods for the production of uniformly 13C,15N-labeled proteins in shake flasks and of uniformly 13C,15N-labeled and 2H,13C,15N-labeled proteins in fermenters. We also provide details of two chromatographic procedures, cation exchange and concanavalin A lectin affinity, that have proved useful in purifying P. pastoris-expressed proteins for NMR studies.