Advanced immunocapture of milk-borne Salmonella by microfluidic magnetically stabilized fluidized bed.

The success of microfluidic immunocapture based on magnetic beads depends primarily on a sophisticated microscale separation system and on the quality of the magnetic immunosorbent. A microfluidic chip containing a magnetically stabilized fluidized bed (µMSFB), developed for the capture and on-chip amplification of bacteria, was recently described by Pereiro et al.. The present work shows the thorough development of anti-Salmonella magnetic immunosorbents with the optimal capture efficiency and selectivity. Based on the corresponding ISO standards, these parameters have to be high enough to capture even a few cells of bacteria in a proper aliquot of sample, e.g. milk. The selection of specific anti-Salmonella IgG molecules and the conditions for covalent bonding were the key steps in preparing an immunosorbent of the desired quality. The protocol for immunocapturing was first thoroughly optimized and studied in a batchwise arrangement, and then the carrier was integrated into the µMSFB chip. The combination of the unique design of the chip (guaranteeing the collision of cells with magnetic beads) with the advanced immunosorbent led to a Salmonella cell capture efficiency of up to 99%. These high values were achieved repeatedly even in samples of milk differing in fat content. The rate of nonspecific capture of Escherichia coli (i.e. the negative control) was only 2%.

Crystal Growth Kinetics in GeS2 Glass and Viscosity of Supercooled Liquid.

The crystal growth kinetics and morphology in germanium disulfide bulk glass and glass surface is described. The structural relaxation taking place below the glass transition is slow and the corresponding volumetric change is negligible. Therefore, it does not affect substantially the crystal growth process. The crystal growth rate of low temperature ß-GeS2 and high temperature α-GeS2 polymorphs in the bulk glass is comparable, being slightly decoupled from the shear viscosity below the glass transition. The crystal growth rate of ß-GeS2 in an amorphous thin film of the same composition is several orders of magnitude faster than that at the surface of bulk glass. This fast surface crystal growth is strongly decoupled from viscosity. Such behavior resembles the glass-to-crystal fast growth mode observed by several authors in some organic molecular glasses. Taking into account previously reported viscosity and heat capacity data, the crystal growth kinetics of both polymorphs can be quantitatively described by the 2D surface growth model for low and high supercooling. The nonisothermal differential scanning calorimetry experiments are analyzed, providing evidence of a complex nature of the overall crystallization process with apparent activation energy comparable to that obtained from isothermal microscopy measurement of crystal growth in the same temperature range.

Electrochemical Infilling of CuInSe2 within TiO2 Nanotube Layers and Subsequent Photoelectrochemical Studies.

Anodic self-organized TiO2 nanotube layers (with different aspect ratios) were electrochemically infilled with CuInSe2 nanocrystals with the aim to prepare heterostructures with a photoelectrochemical response in the visible light. The resulting heterostructure assembly was confirmed by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). High incident photon-to-electron conversion efficiency values exceeding 55% were obtained in the visible-light region. The resulting heterostructures show promise as a candidate for solid-state solar cells.

Crystal Growth Kinetics and Viscous Behavior in Ge2Sb2Se5 Undercooled Melt.

Crystal growth, viscosity, and melting were studied in Ge2Sb2Se5 bulk samples. The crystals formed a compact layer on the surface of the sample and then continued to grow from the surface to the central part of the sample. The formed crystalline layer grew linearly with time, which suggests that the crystal growth is controlled by liquid-crystal interface kinetics. Combining the growth data with the measured viscosities and melting data, crystal growth could be described on the basis of standard crystal growth models. The screw dislocation growth model seems to be operative in describing the temperature dependence of the crystal growth rate in the studied material in a wide temperature range. A detailed discussion on the relation between the kinetic coefficient of crystal growth and viscosity (ukin ∝ η(-ξ)) is presented. The activation energy of crystal growth was found to be higher than the activation energy of crystallization obtained from differential scanning calorimetry, which covers the whole nucleation-growth process. This difference is considered and explained under the experimental conditions.