Thiol-ene mediated neoglycosylation of collagen patches: a preliminary study.

Despite the relevance of carbohydrates as cues in eliciting specific biological responses, the covalent surface modification of collagen-based matrices with small carbohydrate epitopes has been scarcely investigated. We report thereby the development of an efficient procedure for the chemoselective neoglycosylation of collagen matrices (patches) via a thiol-ene approach, between alkene-derived monosaccharides and the thiol-functionalized material surface. Synchrotron radiation-induced X-ray photoelectron spectroscopy (SR-XPS), Fourier transform-infrared (FT-IR), and enzyme-linked lectin assay (ELLA) confirmed the effectiveness of the collagen neoglycosylation. Preliminary biological evaluation in osteoarthritic models is reported. The proposed methodology can be extended to any thiolated surface for the development of smart biomaterials for innovative approaches in regenerative medicine.

Structural changes of conjugated Pt-containing polymetallaynes exposed to gamma ray radiation doses.

The effect of (60)Co gamma rays irradiation on the polymetallayne [-Pt(PBu(3))-C≡C-C(6)H(4)-C(6)H(4)-C≡C-](n) (Pt-DEBP) of defined chain length corresponding to 10 repeat units, has been studied in detail. The UV-vis absorption spectra of Pt-DEBP have been recorded in solution upon exposure of the polymetallayne at increasing radiation doses in the range up to 90 Gy, with special care to the features related to low doses. Complex modifications of the chemical structure of Pt-DEBP could be accessed through NMR, FTIR, GPC, and XPS characterizations, which support the attack of Cl and H radicals coming from the radiolysis of the solvent, CHCl(3), to the triple C≡C bonds of the backbone, leading to the formation of chlorinated double and single C-C bonds, with a concomitant increase of the molecular weight due to a recombinant effect of oligomer fragments upon irradiation. The presence of vinyl and single chlorinated moieties has been sustained from the simulation of the UV-vis spectra based on theoretical calculations.

Self-assembled monolayers based on Pd-containing organometallic thiols: preparation and structural characterization.

Multilayers and self-assembled monolayers of on-purpose-prepared organometallic thiolates, trans-[Pd(PBu(3))(2)(SCOCH(3))(2)], trans-[(C(6)H(5)C[triple bond]C)Pd(PBu(3))(2)(SCOCH(3))], and trans,trans-[(CH(3)COS)Pd(PBu(3))(2)(C[triple bond]C-C(6)H(4)-C(6)H(4)-C[triple bond]C)(PBu(3))(2)Pd(SCOCH(3))] were deposited onto gold surfaces. High-resolution X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure measurements allowed us to assess the anchoring of the organometallic thiols onto gold substrates; the interaction occurring at the interface; and their molecular orientation on the surface with tilt angles of about 30 degrees-40 degrees, depending on the investigated molecule. The molecule packing density/coverage was also assessed.

H2S gas interaction with Pt(II)-containing polymetallaynes of selected chain length: an XPS and EXAFS study.

The interaction between gaseous H2S and the surface of several metal-containing oligomers, investigated by emission and absorption spectroscopies, is presented and discussed. The polymetallayne trans-{Cl-[Pt(PBu3)2(CC-C6H4-C6H4-CC)]9Pt(PBu3)2Cl} and related model molecules, i.e. the binuclear transition metal dialkynyl bridged Pt(II) square planar complex trans, trans-[ClPt(PBu3)2(CC-C6H4-C6H4-CC)Pt(PBu3)2Cl], the tetranuclear linear oligomer trans-{Cl-[Pt(PBu3)2(CC-C6H4-C6H4-CC)]3Pt(PBu3)2Cl}, the tetranuclear cyclic oligomer cis-[Pt(PBu3)2(CC-C6H4-C6H4-CC)]4, were exposed to hydrogen sulfide and then investigated by X-ray photoelectron (XPS) and X-ray absorption (XAS) spectroscopies, in order to shed light on the gas/polymer interaction associated to the sensing properties of these materials. XPS measurements evidenced the presence of S in the polymetallayne samples exposed to H2S, and the measured S2p binding energy values correlate with H2S adsorbed by means of sulfur atoms chemically bonded to metal atoms, owing to the formation of sulfur-containing adducts. XAS data analysis suggested a square-pyramidal geometry around the transition metal with H2S in the apical position for the pentacoordinated platinum units.

Nanofibers of Human Tropoelastin-inspired peptides: Structural characterization and biological properties.

Regenerative medicine is taking great advantage from the use of biomaterials in the treatments of a wide range of diseases and injuries. Among other biomaterials, self-assembling peptides are appealing systems due to their ability to spontaneously form nanostructured hydrogels that can be directly injected into lesions. Indeed, self-assembling peptide scaffolds are expected to behave as biomimetic matrices able to surround cells, to promote specific interactions, and to control and modify cell behavior by mimicking the native environment as well. We selected three pentadecapeptides inspired by Human Tropoelastin, a natural protein of the extracellular matrix, expected to show high biocompatibility. Moreover, the here proposed self-assembling peptides (SAPs) are able to spontaneously aggregate in nanofibers in biological environment, as revealed by AFM (Atomic Force Microscopy). Peptides were characterized by XPS (X-ray Photoelectron Spectroscopy) and IRRAS (Infrared Reflection Absorption Spectroscopy) both as lyophilized (not aggregated) and as aggregated (nanofibers) samples in order to investigate some potential differences in their chemical composition and intermolecular interactions, and to analyze the surface and interface of nanofibers. Finally, an accurate investigation of the biological properties of the SAPs and of their interaction with cells was performed by culturing for the first time human Mesenchymal Stem Cells (hMSCs) in presence of SAPs. The final aim of this work was to assess if Human Tropoelastin-inspired nanostructured fibers could exert a cytotoxic effect and to evaluate their biocompatibility, cellular adhesion and proliferation.

Galactose grafting on poly(ε-caprolactone) substrates for tissue engineering: a preliminary study.

The grafting of galactose units onto poly(ε-caprolactone) (PCL) substrates by a wet chemistry two-step procedure is proposed. Even though a reduction of hardness from 0.58-0.31 GPa to 0.12-0.05 GPa is achieved, the chemical functionalization does not negatively affect the tensile modulus (332.2±31.3 MPa and 328.5±34.7 MPa for unmodified and surface-modified PCL, respectively) and strength (15.1±1.3 MPa and 14.8±1.5 MPa as assessed before and after the surface modification, respectively), as well as the mechanical behaviour evaluated through small punch test. XPS and enzyme-linked lectin assay (ELLA) demonstrate the presence, and also the correct exposition of the saccharidic epitope on PCL substrates. The introduction of carbohydrate moieties on the PCL surfaces clearly enhances the hydrophilicity of the substrate, as the water contact angle decreases from 82.1±5.8° to 62.1±4.2°. Furthermore, preliminary biological analysis shows human mesenchymal stem cell viability over time and an improvement of cell adhesion and spreading.

Dendron synthesis and carbohydrate immobilization on a biomaterial surface by a double-click reaction.

The synthesis of new dendrons and their immobilization on collagen patches via thiol-ene photoclick reaction, followed by chemoselective alkoxyamino-carbonyl conjugation to carbohydrates is presented. XPS, FTIR, and ELLA assays confirmed the effectiveness of the collagen multivalent neoglycosylation.

Mechanisms underlying the attachment and spreading of human osteoblasts: from transient interactions to focal adhesions on vitronectin-grafted bioactive surfaces.

The features of implant devices and the reactions of bone-derived cells to foreign surfaces determine implant success during osseointegration. In an attempt to better understand the mechanisms underlying osteoblasts attachment and spreading, in this study adhesive peptides containing the fibronectin sequence motif for integrin binding (Arg-Gly-Asp, RGD) or mapping the human vitronectin protein (HVP) were grafted on glass and titanium surfaces with or without chemically induced controlled immobilization. As shown by total internal reflection fluorescence microscopy, human osteoblasts develop adhesion patches only on specifically immobilized peptides. Indeed, cells quickly develop focal adhesions on RGD-grafted surfaces, while HVP peptide promotes filopodia, structures involved in cellular spreading. As indicated by immunocytochemistry and quantitative polymerase chain reaction, focal adhesions kinase activation is delayed on HVP peptides with respect to RGD while an osteogenic phenotypic response appears within 24h on osteoblasts cultured on both peptides. Cellular pathways underlying osteoblasts attachment are, however, different. As demonstrated by adhesion blocking assays, integrins are mainly involved in osteoblast adhesion to RGD peptide, while HVP selects osteoblasts for attachment through proteoglycan-mediated interactions. Thus an interfacial layer of an endosseous device grafted with specifically immobilized HVP peptide not only selects the attachment and supports differentiation of osteoblasts but also promotes cellular migration.

Core shell hybrids based on noble metal nanoparticles and conjugated polymers: synthesis and characterization.

Noble metal nanoparticles of different sizes and shapes combined with conjugated functional polymers give rise to advanced core shell hybrids with interesting physical characteristics and potential applications in sensors or cancer therapy. In this paper, a versatile and facile synthesis of core shell systems based on noble metal nanoparticles (AuNPs, AgNPs, PtNPs), coated by copolymers belonging to the class of substituted polyacetylenes has been developed. The polymeric shells containing functionalities such as phenyl, ammonium, or thiol pending groups have been chosen in order to tune hydrophilic and hydrophobic properties and solubility of the target core shell hybrids. The Au, Ag, or Pt nanoparticles coated by poly(dimethylpropargylamonium chloride), or poly(phenylacetylene-co-allylmercaptan). The chemical structure of polymeric shell, size and size distribution and optical properties of hybrids have been assessed. The mean diameter of the metal core has been measured (about 10-30 nm) with polymeric shell of about 2 nm.

Mono- and bi-functional arenethiols as surfactants for gold nanoparticles: synthesis and characterization.

Stable gold nanoparticles stabilized by different mono and bi-functional arenethiols, namely, benzylthiol and 1,4-benzenedimethanethiol, have been prepared by using a modified Brust's two-phase synthesis. The size, shape, and crystalline structure of the gold nanoparticles have been determined by high-resolution electron microscopy and full-pattern X-ray powder diffraction analyses. Nanocrystals diameters have been tuned in the range 2 ÷ 9 nm by a proper variation of Au/S molar ratio. The chemical composition of gold nanoparticles and their interaction with thiols have been investigated by X-ray photoelectron spectroscopy. In particular, the formation of networks has been observed with interconnected gold nanoparticles containing 1,4-benzenedimethanethiol as ligand.

Nanostructured functional co-polymers bioconjugate integrin inhibitors.

Synthesis and properties of bioconjugates based on functionalized polymeric nanoparticles (PNs) and monoclonal anti-Integrin αV CD51 (aI) antibody were investigated. Polymeric and co-polymeric colloidal nanoparticles with different functionalities, i.e., acid, amine, or thiol, namely poly(methylmethacrylate-co-acrylic acid) [P(MMA-co-AA)], poly(methylmethacrylate-co-dimethylpropargylamine) [P(MMA-co-DMPA)], poly(methylmethacrylate-co-allil mercaptane) [P(MMA-co-AM)], were obtained by tailoring emulsion synthesis and fully characterized by means of spectroscopic techniques and scanning electron microscopy (SEM). Bioconjugates (PN/aI) based on P(MMA) or P(MMA-co-AA) were obtained by loading the polymeric nanoparticles with the antibody anti-Integrin with a simple and straightforward immobilization strategy. Bioconjugates qualitative and quantitative loading analyses were carried out by means of polyacrylamide gel electrophoresis 1D-PAGE, MALDI-TOF, and LC/ESI-MS/MS investigations. The biological efficacy of bioconjugates was confirmed by the reduced migration potential of PN/aI-treated human kidney cells (HEK293). The easy immobilization procedure and high immobilization capacity of polymeric nanoparticles together with tuneable chemical functionalities and dimension of the polymeric nanoparticles open applicative perspectives for targeted delivery.

Self-assembled nanoparticles of functional copolymers for photonic applications.

A modified emulsion copolymerization of phenylacetylene (PA) with hydrophilic monomers having different functions, i.e., acrylic acid (AA) and N,N-dimethylpropargylamine (DMPA) respectively, yields functionalized polymeric P(PA-co-AA) and P(PA-co-DMPA) nanoparticles. The systematic investigation on the experimental parameters affecting size, surface charge and polydispersity of the copolymers (initiator concentration, reaction time, cosolvent and PA/comonomer ratios) allows to modulate the nanoparticle physico-chemical properties. Spherical shaped particles with diameters in the range 80-500 nm, low polydispersity (PI values in the range 1.11-1.30) and different surface charge densities, between 0.44 and 2.87 microC/cm(2), have been consistently obtained and characterized by means of Dynamic Light Scattering (DLS), laser Doppler electrophoretic and Scanning Electron Microscopy (SEM) studies. XPS measurements have provided information on the nanoparticles chemical surface structure and suggest that AA and DMPA units are preferentially distributed on the surface of the spheres. The nanospheres self-assemble giving large domains (9.5 x 14.5 microm). Photonic analysis of the self-assembled copolymeric nanoparticles has been performed by means of Spectroscopic Ellipsometry (SE) and Bragg reflection spectroscopy, both of them demonstrating a three-dimensional photonic crystal property of these systems.

Covalent surface modification of titanium oxide with different adhesive peptides: surface characterization and osteoblast-like cell adhesion.

A fundamental goal in the field of implantology is the design of innovative devices suitable for promoting implant-to-tissue integration. This result can be achieved by means of surface modifications aimed at optimizing tissue regeneration. In the framework of oral and orthopedic implantology, surface modifications concern both the optimization of titanium/titanium alloy surface roughness and the attachment of biochemical factors able to guide cellular adhesion and/or growth. This article focuses on the covalent attachment of two different adhesive peptides to rough titanium disks. The capability of biomimetic surfaces to increase osteoblast adhesion and the specificity of their biological activity due to the presence of cell adhesion signal-motif have also been investigated. In addition, surface analyses by profilometry, X-ray photoelectron spectroscopy, and time of flight-secondary ion mass spectrometry have been carried out to investigate the effects and modifications induced by grafting procedures.

Assessment of novel chemical strategies for covalent attachment of adhesive peptides to rough titanium surfaces: XPS analysis and biological evaluation.

Bioactive molecules have been proposed to promote beneficial interactions at bone-implant interfaces for enhancing integration. The main objective of this study was to develop novel methods to functionalize oxidized titanium surfaces by the covalent immobilization of bioactive peptides, through selective reaction involving single functional groups. In the first protocol, an aminoalkylsilane was covalently linked to the Ti oxide layer, followed by covalent binding of glutaric anhydride to the free NH(2) groups. The carboxylic group of glutaric anhydride was used to condense the free N-terminal group of the side-chain protected peptide sequence. Finally, the surface was treated with trifluoroacetic acid to deprotect side-chain groups. In the second protocol, the peptide was directly anchored to the Ti oxide surface via UV activation of an arylazide peptide analogue. X-ray photoelectron spectroscopy analyses confirmed that modifications induced onto surface composition were in agreement with the reactions performed. The peptide density of each biomimetic surface was determined on the basis of radiolabeling and XPS derived reaction yields. The in vitro cellular response of the biomimetic surfaces was evaluated using a primary human osteoblast cell model. Cell adhesion, proliferation, differentiation, and mineralization were examined at initial-, short-, and long-time periods. In was shown that the biomimetic surface obtained through photoprobe-marked analogue that combines an easily-performed modification provides a favorable surface for an enhanced cellular response.

Synthesis and Microstructural Investigations of Organometallic Pd(II) Thiol-Gold Nanoparticles Hybrids.

In this work the synthesis and characterization of gold nanoparticles functionalized by a novel thiol-organometallic complex containing Pd(II) centers is presented. Pd(II) thiol, trans, trans-[dithiolate-dibis(tributylphosphine)dipalladium(II)-4,4'-diethynylbiphenyl] was synthesized and linked to Au nanoparticles by the chemical reduction of a metal salt precursor. The new hybrid made of organometallic Pd(II) thiol-gold nanoparticles, shows through a single S bridge a direct link between Pd(II) and Au nanoparticles. The size-control of the Au nanoparticles (diameter range 2-10 nm) was achieved by choosing the suitable AuCl(4) (-)/thiol molar ratio. The size, strain, shape, and crystalline structure of these functionalized nanoparticles were determined by a full-pattern X-ray powder diffraction analysis, high-resolution TEM, and X-ray photoelectron spectroscopy. Photoluminescence spectroscopy measurements of the hybrid system show emission peaks at 418 and 440 nm. The hybrid was exposed to gaseous NO(x) with the aim to evaluate the suitability for applications in sensor devices; XPS measurements permitted to ascertain and investigate the hybrid -gas interaction.