Solvent-Modulated Specific Ion Effects: Poly(N-isopropylacrylamide) Brushes in Nonaqueous Electrolytes.

Pertinent to cryopreservation as well as energy storage and batteries, nonaqueous electrolytes and their mixtures with water were investigated. In particular, specific ion-induced effects on the modulation of a poly(N-isopropylacrylamide) (PNIPAM) brush were investigated in various dimethyl sulfoxide (DMSO)-water solvent mixtures. Spectroscopic ellipsometry and neutron reflectometry were employed to probe changes in brush swelling and structure, respectively. In water-rich solvents (i.e., pure water and 6 mol % DMSO), PNIPAM undergoes a swollen to collapsed thermotransition with increasing temperature, whereby a forward Hofmeister series was noted; K+ and Li+ electrolytes composed of SCN- and I- salted-in (stabilized) PNIPAM chains, and electrolytes of Cl- and Br- salted-out (destabilized) the polymer. The cation was seen to play a lesser role than that of the anion, merely modulating the magnitude of the anion effect. In 70 mol % DMSO, a collapsed to swollen thermotransition was noted for PNIPAM. Here, concentration-dependent specific ion effects were observed; a forward series was observed in 0.2 mol % electrolytes, whereas increasing the electrolyte concentration to 0.9 mol % led to a series reversal. While no thermotransition was observed in pure DMSO, a solvent-induced specific ion series reversal was noted; SCN- destabilized the brush and Cl- stabilized the brush. Both series reversals are attributed to the delicate balance of interactions between the solvent, solute (ion), and substrate (brush). Namely, the stability of the solvent clusters was hypothesized to drive polymer solvation.

Diffusion Measurements To Understand Dynamics and Structuring in Solutions Involving a Homologous Series of Ionic Liquids.

The self-diffusion coefficients of each of the components in mixtures containing pyridine and each of the homologous series 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imides in acetonitrile were determined using NMR diffusometry (i. e., Pulsed Gradient Spin Echo). The nature of solvation was found to change significantly with the proportion of salt in the mixtures. Increased diffusion coefficients (when corrected for viscosity) for the molecular components were observed with increasing proportion of ionic liquid and with increasing alkyl chain length on the cation. Comparison of the molecular solvents suggests increased interactions in solution of the pyridine with other components of the mixture, consistent with the proposed interactions shown previously to drive changes in reaction kinetics. Discontinuities were seen in the diffusion data for each species in solution across different ionic liquids between the hexyl and octyl derivatives, suggesting a change in the structuring in solution as the alkyl chain on the cation changes and demonstrating the importance of such when considering homologous series.

Underscreening in concentrated electrolytes: re-entrant swelling in polyelectrolyte brushes.

Hypersaline environments are ubiquitous in nature and are found in myriad technological processes. Recent empirical studies have revealed a significant discrepancy between predicted and observed screening lengths at high salt concentrations, a phenomenon referred to as underscreening. Herein we investigate underscreening using a cationic polyelectrolyte brush as an exemplar. Poly(2-(methacryloyloxy)ethyl)trimethylammonium (PMETAC) brushes were synthesised and their internal structural changes and swelling response was monitored with neutron reflectometry and spectroscopic ellipsometry. Both techniques revealed a monotonic brush collapse as the concentration of symmetric monovalent electrolyte increased. However, a non-monotonic change in brush thickness was observed in all multivalent electrolytes at higher concentrations, known as re-entrant swelling; indicative of underscreening. For all electrolytes, numerical self-consistent field theory predictions align with experimental studies in the low-to-moderate salt concentration regions. Analysis suggests that the classical theory of electrolytes is insufficient to describe the screening lengths observed at high salt concentrations and that the re-entrant polyelectrolyte brush swelling seen herein is consistent with the so-called regular underscreening phenomenon.

Effects of Ionic Liquids on the Nucleofugality of Chloride.

The nucleofugality of chloride has been measured in solvent mixtures containing ionic liquids for the first time, allowing reactivity in these solvents to be put in context with molecular solvents. Using well-described electrofuges, solvolysis rate constants were determined in mixtures containing different proportions of ethanol and the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide; the different solvent effects observed as the mixture changed could be explained using interactions of the ionic liquid with species along the reaction coordinate, determined using temperature dependent kinetic studies. The solvolysis data allowed determination of the nucleofugality of chloride in these mixtures, which varied with the proportion of salt in the reaction mixture, demonstrating quantitatively the importance of the amount of ionic liquid in the reaction mixture in determining reaction outcome. Nucleofugality data for chloride were determined in seven further ionic liquids, with the reactivity shown to vary over more than an order of magnitude. This outcome illustrates that the components of the ionic liquid are critical in determining reaction outcome. Overall, this work quantitatively extends the understanding of solvent effects in ionic liquids and demonstrates the potential for such information to be used to rationally select an ionic liquid to control reaction outcome.

Rapid relaxation NMR measurements to predict rate coefficients in ionic liquid mixtures. An examination of reaction outcome changes in a homologous series of ionic liquids.

A series of ionic liquids based on the 1-alkyl-3-methylimidazolium cations were examined as components of the solvent mixture for a bimolecular substitution process. The effects on both the rate coefficient of the process and the NMR spin-spin relaxation of the solvent components of changing either the alkyl chain length or the amount of ionic liquid in the reaction mixture were determined. At a constant mole fraction, a shorter alkyl chain length resulted in a greater rate coefficient enhancement and a longer relaxation time, with the opposite effects for a longer alkyl chain length. For a given ionic liquid, increasing the proportion of salt in the reaction mixture resulted in a greater rate coefficient and a shorter relaxation time. The microscopic origins of the rate coefficient enhancement were determined and a step change found in the activation parameters on increasing the alkyl chain length from hexyl to octyl, suggesting notable structuring in solution. Across a range of ionic liquids and solvent compositions, the relaxation time from NMR measurements was shown to relate to the reaction rate coefficient. The approach of using fast and simple NMR relaxation measurements to predict reaction outcomes was exemplified using a morpholinium-based ionic liquid.

Enrichment of Charged Monomers Explains Non-monotonic Polymer Volume Fraction Profiles of Multi-stimulus Responsive Copolymer Brushes.

Multi-stimulus responsive poly(2-(2-methoxyethoxy)ethyl methacrylate-co-2-(diethylamino)ethyl methacrylate) [P(MEO2MA-co-DEA)] 80:20 mol % copolymer brushes were synthesized on planar silica substrates via surface-initiated activators continuously regenerated via electron transfer atom transfer radical polymerization. Brush thickness was sensitive to changes in pH and temperature as monitored with ellipsometry. At low pH, the brush is charged and swollen, while at high pH, the brush is uncharged and more collapsed. Clear thermoresponsive behavior is also observed with the brush more swollen at low temperatures compared to high temperatures at both high and low pH. Neutron reflectometry was used to determine the polymer volume fraction profiles (VFPs) at various pH values and temperatures. A region of lower polymer content, or a depletion region, near the substrate is present in all of the experimental polymer VFPs, and it is more pronounced at low pH (high charge) and less so at high pH (low charge). Polymer VFPs calculated through numerical self-consistent field theory suggest that enrichment of DEA monomers near the substrate results in the experimentally observed non-monotonic VFPs. Adsorption of DEA monomers to the substrate prior to initiation of polymerization could give rise to DEA segment-enriched region proximal to the substrate.

Controlling the outcome of SN2 reactions in ionic liquids: from rational data set design to predictive linear regression models.

Rate constants for a bimolecular nucleophilic substitution (SN2) process in a range of ionic liquids are correlated with calculated parameters associated with the charge localisation on the cation of the ionic liquid (including the molecular electrostatic potential). Simple linear regression models proved effective, though the interdependency of the descriptors needs to be taken into account when considering generality. A series of ionic liquids were then prepared and evaluated as solvents for the same process; this data set was rationally chosen to incorporate homologous series (to evaluate systematic variation) and functionalities not available in the original data set. These new data were used to evaluate and refine the original models, which were expanded to include simple artificial neural networks. Along with showing the importance of an appropriate data set and the perils of overfitting, the work demonstrates that such models can be used to reliably predict ionic liquid solvent effects on an organic process, within the limits of the data set.

Temperature dependent specific ion effects in mixed salt environments on a thermoresponsive poly(oligoethylene glycol methacrylate) brush.

The temperature induced swelling/collapse transition of poly(oligoethylene glycol methacrylate) (POEGMA) brushes has been investigated in electrolyte solutions comprised of multiple anions. The behaviour of a POEGMA brush in mixed salt environments of potassium acetate (KCH3COO, causes collapse) and thiocyanate (KSCN, causes swelling), two ions at opposite ends of the Hofmeister series, has been monitored with neutron reflectometry (NR) and quartz crystal microbalance with dissipation (QCM-D). These techniques revealed that the balance of the swelling/collapse influence of the two ions on the structure of the brush is temperature dependent. At low temperatures in mixed salt environments, the influence of the acetate and thiocyanate ions appears additive, antagonistic and approximately equal in magnitude, with brush thickness and dissipation similar to the brush in the absence of electrolyte. At higher temperatures, the influence of the acetate ion diminishes, resulting in an increase in the relative influence of the thiocyanate ion on the brush conformation. These temperature dependent specific ion effects are attributed to increased steric crowding in the brush, along with an increased affinity of the thiocyanate ion for the polymer at higher temperatures.

Comparing Surfactant Structures at "Soft" and "Hard" Hydrophobic Materials: Not All Interfaces Are Equivalent.

The interfacial structures of a range of amphiphilic molecules are studied with both "soft" and "hard" hydrophobic substrates. Neutron reflection and quartz crystal microbalance with dissipation measurements highlight the differences between the adsorbed structures adopted by sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (C16TAB), and the "AM1" surface active peptide. At the soft siloxane/water interface, small molecular surfactants form loosely packed layers, with the hydrophobic tails penetrating into the oily layer, and an area per surfactant molecule that is significantly less than previously reported for the air/water interface. Neutron reflection measurements, supported by quartz crystal microbalance studies, indicate that for C16TAB, approximately 30 ± 8% of the alkyl tail penetrates into the poly(dimethylsiloxane) (PDMS) layer, whereas 20 ± 5% of the alkyl tail of SDS is located in the PDMS. For the engineered peptide surfactant AM1 (21 residues), it was found that one face of the α helix penetrated into the PDMS film. In contrast, penetration of the surfactant tails was not observed against hard solidlike hydrophobic surfaces made from octadecyltrichlorosilane (OTS) for any of the molecular species studied. At the OTS/water interface, C16TAB and SDS were seen to adsorb as larger aggregates and not as monolayers. Amphiphilic adsorption (amount, structural conformation) at the PDMS/water interface is shown to be different from that at both the air/water interface and the hard OTS/water interface, illustrating that interfacial structures cannot be predicted by the surfactant packing parameter alone. The bound PDMS layer is shown to be a useful proxy for the oil/water interface in surface and stabilization studies, with hydrophobic components of the molecules able to penetrate into the oily PDMS.

Influence of molecular weight on PNIPAM brush modified colloidal silica particles.

The effect of molecular weight and temperature on the phase transition and internal structure of poly(N-isopropylacrylamide) brush modified colloidal silica particles was investigated using dynamic light scattering (DLS) and small angle neutron scattering (SANS) between 15 and 45 °C. Dry particle analysis utilising transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) all confirmed the thickness of the polymer brush shell increased as a function of polymerisation time. Hydrodynamic diameter and electrophoretic mobility results revealed that the brush modified particles transitioned from swollen shells to a collapsed conformation between 15 and 35 °C. The dispersions were electrosterically stabilised over the entire temperature range investigated, with minimal thermal hysteresis recorded. Modelling of the hydrodynamic diameter enabled the calculation of a lower critical solution temperature (LCST) which increased as a function of brush thickness. The internal structure determined via SANS showed a swollen brush at low temperatures (18 and 25 °C) which decayed radially away from the substrate, while a collapsed block-like conformation with 60% polymer volume fraction was present at 40 °C. Radial phase separation was evident at intermediate temperatures (30 and 32.5 °C) with the lower molecular weight sample having a greater volume fraction of polymer in the dense inner region at these temperatures.

Arrested coalescence of viscoelastic droplets: triplet shape and restructuring.

The stability of shapes formed by three viscoelastic droplets during their arrested coalescence has been investigated using micromanipulation experiments. Addition of a third droplet to arrested droplet doublets is shown to be controlled by the balance between interfacial pressures driving coalescence and internal elasticity that resists total consolidation. The free fluid available within the droplets controls the transmission of stress during droplet combination and allows connections to occur via formation of a neck between the droplets. The anisotropy of three-droplet systems adds complexity to the symmetric case of two-droplet aggregates because of the multiplicity of orientations possible for the third droplet. When elasticity dominates, the initial orientation of the third droplet is preserved in the triplet's final shape. When elasticity is dominated by the interfacial driving force, the final shape can deviate strongly from the initial positioning of droplets. Movement of the third droplet to a more compact packing occurs, driven by liquid meniscus expansion that minimizes the surface energy of the triplet. A range of compositions and orientations are examined and the resulting domains of restructuring and stability are mapped based on the final triplet structure. A geometric and a physical model are used to explain the mechanism driving meniscus-induced restructuring and are related to the impact of these phenomena on multiple droplet emulsions.

Soft polyhedral particles based on cubic liquid crystalline emulsion droplets.

Soft polyhedral particles based on variations of the cubic symmetry group are produced from a precursor emulsion by extracting solvent to grow facets on the droplets. The droplets transform into liquid crystals with solid-like rheology and controlled size and shape. Small-angle X-ray scattering confirms a bicontinuous cubic liquid crystalline phase forms from aqueous glycerol monoolein and is responsible for the particle faceting observed. Different polyhedra are produced by varying face growth rates through control of precursor droplet size, system temperature, and solubilization and adsorption of guest molecules. More exotic faceted shapes can be formed by the soft particles by applying asymmetric solvent removal gradients and by deforming the precursor droplets into, for example, ellipsoids before crystallization. The method is a powerful means to produce soft polyhedra, using continuous microfluidic or other approaches, or to act as templates for hard polyhedral particle synthesis.

Relaxation NMR as a tool to study the dispersion and formulation behavior of nanostructured carbon materials.

Solvent relaxation NMR has been used to estimate the surface areas and wettability of various types of nanostructured carbon materials in a range of solvents including water, ethanol, and tetrahydrofuran. We illustrate the application of the technique through several short case studies using samples including nanocarbon blacks, graphene oxide, nanographites, and porous graphenes. The technique is shown to give a good measure of surface area, correlating well with conventional surface area estimates obtained by nitrogen adsorption, transmission electron microscopy, or light scattering for the non-porous samples. NMR relaxation has advantages in terms of speed of analysis and being able to use concentrated, wet, and opaque samples. For samples that are porous, two distinct surface areas can be estimated assuming the two environments ('inner' and 'outer') have the same surface chemistry, and that there is a slow exchange of solvent molecules between them. Furthermore, we show that differences in wettability and dispersability between samples dispersed in water, ethanol, and cyclopentanone can be observed, along with changes to the surface chemistry of the interface. Copyright © 2015 John Wiley & Sons, Ltd.

Impact of End-Tethered Polyhedral Nanoparticles on the Mobility of Poly(dimethylsiloxane).

A series of dumbbell-shaped nanocomposite materials of poly(dimethylsiloxanes) (PDMSs) and polyhedral oligomeric silsesquioxanes (POSSs) were synthesized through hydrosilylation reactions of allyl- and vinyl-POSS and hydride-terminated PDMS. The chemical structures of the dumbbell-shaped materials, so-called POSS-PDMS-POSS triblocks, were characterized by (1)H NMR and FT-IR spectroscopy. The molecular weights of the triblock polymers were determined by gel permeation chromatography (GPC). Their size was analyzed by small-angle neutron scattering (SANS) and pulsed-field gradient stimulated echo (PFG STE) NMR experiments. The impact of POSS on the molecular mobility of the PDMS middle chain was observed by using (1)H spin-spin (T2) relaxation NMR. In contrast to the PDMS melts, the triblocks showed an increase in mobility with increasing molecular weight over the range studied due to the reduced relative concentration of constraints imposed by the end-tethered nanoparticles. The triblock systems were used to compare the impact of tethered nanoparticles on the mobility of the linear component compared to the mobility of the polymer in conventional blended nanocomposites. The tethered nanoparticles were found to provide more reinforcement than physically dispersed particles especially at high molecular weights (low particle concentration). The physical blends showed an apparent percolation threshold behavior.

Interpolymer complexation: comparisons of bulk and interfacial structures.

The interactions between the strong polyelectrolyte sodium poly(styrenesulfonate), NaPSS, and the neutral polymer poly(vinylpyrrolidone), PVP, were investigated in bulk and at the silica/solution interface using a combination of diffusion nuclear magnetic resonance spectroscopy (NMR), small-angle neutron scattering (SANS), solvent relaxation NMR, and ellipsometry. We show for the first time that complex formation occurs between NaPSS and PVP in solution; the complexes formed were shown not to be influenced by pH variation, whereas increasing the ionic strength increases the complexation of NaPSS but does not influence the PVP directly. The complexes formed contained a large proportion of NaPSS. Study of these interactions at the silica interface demonstrated that complexes also form at the nanoparticle interface where PVP is added in the system prior to NaPSS. For a constant PVP concentration and varying NaPSS concentration, the system remains stable until NaPSS is added in excess, which leads to depletion flocculation. Surface complex formation using the layer-by-layer technique was also reported at a planar silica interface.

Aggregation behavior of polyisoprene-pluronic graft copolymers in selective solvents.

Novel amphiphilic graft copolymers composed of a polyisoprene (PIP) backbone with Pluronic side chains, polyisoprene-g-Pluronic, have been synthesized using a "graft onto" technique. Small-angle neutron scattering (SANS) has been used to characterize the conformation of the P123 and P103 Pluronic graft copolymers in selective solvents such as ethanol and hexane and in a nonselective solvent, tetrahydrofuran (THF). The results indicated that, in a selective solvent for the side chain Pluronics (e.g., ethanol), "crew-cut" micelles were formed with a large core of radius ∼ 120 Å; data were fitted with a core-shell model. In a good solvent for the backbone (e.g., hexane), "flowerlike" micelles were formed with a small inner radius of ∼64 Å. In the nonselective solvent, a swollen polymer coil was found, which was described using the Guinier-Debye model. As THF/ethanol and THF/hexane can be prepared in any ratio, it was possible to vary the solvent composition gradually in order to study the transition from swollen coil to micelle. When going from 100% THF to 100% ethanol, the transition to micellar behavior was observed at a ratio of 20:80 (v/v %) THF/ethanol for both grafted copolymers and 40:60 (v/v %) THF/hexane for grafted P123 copolymers.

Adsorption and surfactant-mediated desorption of poly(vinylpyrrolidone) on plasma- and piranha-cleaned silica surfaces.

Optical flow cell reflectometry was used to study the adsorption of poly(vinylpyrrolidone) (PVP) to a silica surface and the subsequent surfactant adsorption and polymer desorption upon exposure to the anionic surfactant sodium dodecyl sulfate (SDS). We have studied these effects as a function of pH and surfactant concentration, but also for two different methods of silica preparation, O2 plasma and piranha cleaning. As a function of pH, a plateau in the amount adsorbed of ∼0.6 mg/m(2) is observed below a critical pH, above which the adsorption decreases to zero within 2-3 pH units. An increase in pH leads to dissociation of surface OH groups and a decreased potential for hydrogen bonding between the polymer and surface. For the plasma- and piranha-cleaned silica, the critical pH differs by 1-2 pH units, a reflection of the much larger amount of surface OH groups on piranha-cleaned silica (for a given pH). Subsequent rinsing of the adsorbed layer of PVP with an SDS solution leads to total or partial desorption of the PVP layer. Any remaining adsorbed PVP then acts as an adsorption site for SDS. A large difference between plasma- and piranha-cleaned silica is observed, with the PVP layer adsorbed to plasma-cleaned silica being much more susceptible to desorption by SDS. For a plasma-cleaned surface at pH 5.5, only 30% of the originally adsorbed PVP is remaining, while for piranha-cleaned silica, the pH can be increased to 10 before a similar reduction in the amount of adsorbed PVP is seen. For a given pH, piranha-cleaned silica has a higher surface charge, leading to a smaller amount of adsorbed SDS per PVP chain on a piranha-cleaned surface compared to a plasma-cleaned surface under identical conditions. In that way, the high negative surface charge makes desorption by negatively charged SDS more difficult. The high surface charge thus protects the neutral polymer from surfactant-mediated desorption.

Responsive nanocellulose-PNIPAM millicapsules.

HYPOTHESIS: Milli- and micro-capsules are developed to facilitate the controlled release of diverse active ingredients by passive diffusion or a triggered burst. As applications expand, capsules are required to be increasingly multi-functional, combining benefits like encapsulation, response, release, and even movement. Balancing the increasingly complex demands of capsules is a desire to minimize material usage, requiring efficient structural and chemical design. Designing multifunctional capsules with complex deformation should be possible even after minimizing the material usage through use of sparse fiber networks if the fibers are coated with responsive polymers. EXPERIMENTS: Here capsules are created with a shell made from a mesh of nanoscale bacterial cellulose fibers that provide mechanical strength at very low mass levels, while a coating of thermoresponsive Poly(N-isopropylacrylamide), PNIPAM, on the fibers provides control of permeability, elastic response, and temperature response. These properties are varied by grafting different amounts of polymer using particular reaction conditions. FINDINGS: The addition of PNIPAM to the cellulose mesh capsule enhances its mechanical properties, enabling it to undergo large deformations and recover once stress is removed. The increased elastic response of the capsule also provides reinforcement against drying-induced capillary stresses, limiting the degree of shrinkage during dehydration. Time-lapse microscopy demonstrates thermoreversible swelling of the capsules in response to temperature change. Cycles of swelling and shrinkage drive solvent convection to and from the capsule interior, allowing exchange of contents and mixing with the bulk fluid on a time scale of seconds. Because the cellulose capsules are produced via emulsion-templated fermentation, the polymer-modified biocapsule concept introduced here presents a pathway toward the sustainable and scalable manufacture of multifunctional responsive capsules.

Illuminating the nanostructure of diffuse interfaces: Recent advances and future directions in reflectometry techniques.

Diffuse soft matter interfaces take many forms, from end-tethered polymer brushes or adsorbed surfactants to self-assembled layers of lipids. These interfaces play crucial roles across a multitude of fields, including materials science, biophysics, and nanotechnology. Understanding the nanostructure and properties of these interfaces is fundamental for optimising their performance and designing novel functional materials. In recent years, reflectometry techniques, in particular neutron reflectometry, have emerged as powerful tools for elucidating the intricate nanostructure of soft matter interfaces with remarkable precision and depth. This review provides an overview of selected recent developments in reflectometry and their applications for illuminating the nanostructure of diffuse interfaces. We explore various principles and methods of neutron and X-ray reflectometry, as well as ellipsometry, and discuss advances in their experimental setups and data analysis approaches. Improvements to experimental neutron reflectometry methods have enabled greater time resolution in kinetic measurements and elucidation of diffuse structure under shear or confinement, while innovation in analysis protocols has significantly reduced data processing times, facilitated co-refinement of reflectometry data from multiple instruments and provided greater-than-ever confidence in proposed structural models. Furthermore, we highlight some significant research findings enabled by these techniques, revealing the organisation, dynamics, and interfacial phenomena at the nanoscale. We also discuss future directions and potential advancements in reflectometry techniques. By shedding light on the nanostructure of diffuse interfaces, reflectometry techniques enable the rational design and tailoring of interfaces with enhanced properties and functionalities.

Competition between polymers for adsorption on silica: a solvent relaxation NMR and small-angle neutron scattering study.

The competition between poly(vinylpyrrolidone) and poly(ethylene oxide) for adsorption at the silica surface was studied by solvent relaxation nuclear magnetic resonance and small-angle neutron scattering. The additive nature of the NMR relaxation rate enhancement was used to observe changes in the train layer when the two polymers were in direct competition for an increasing weight percentage of silica. PVP is shown to displace preadsorbed PEO from the particle surface, and this was observed for a range of PVP molecular weights. SANS measurements were found to give detailed information on the adsorption of the polymers in the separate systems; however, only qualitative information on the adsorption of the polymers could be obtained from the mixed samples. At a total polymer concentration of 0.4% w/v with 1.1% w/v silica, the SANS data were consistent with PVP adsorbing at the surface and dPEO remaining in solution, in agreement with the NMR data.