Arterial reconstruction with human bioengineered acellular blood vessels in patients with peripheral arterial disease.

OBJECTIVE: Vascular conduit is essential for arterial reconstruction for a number of conditions, including trauma and atherosclerotic occlusive disease. We have developed a tissue-engineered human acellular vessel (HAV) that can be manufactured, stored on site at hospitals, and be immediately available for arterial vascular reconstruction. Although the HAV is acellular when implanted, extensive preclinical and clinical testing has demonstrated that the HAV subsequently repopulates with the recipient's own vascular cells. We report a first-in-man clinical experience using the HAV for arterial reconstruction in patients with symptomatic peripheral arterial disease. METHODS: HAVs were manufactured using human vascular smooth muscle cells grown on a biodegradable scaffold. After the establishment of adequate cell growth and extracellular matrix deposition, the vessels were decellularized to remove human cellular antigens. Manufactured vessels were implanted in 20 patients with symptomatic peripheral arterial disease as above-knee, femoral-to-popliteal arterial bypass conduits. After HAV implantation, all patients were assessed for safety, HAV durability, freedom from conduit infection, and bypass patency for 2 years. RESULTS: Twenty HAVs were placed in the arterial, above-knee, femoral-to-popliteal position in patients with rest pain (n = 3) or symptomatic claudication (n = 17). All HAVs functioned as intended and had no evidence of structural failure or rejection by the recipient. No acute HAV infections were reported, but three surgical site infections were documented during the study period. Three non-HAV-related deaths were reported. One vessel developed a pseudoaneurysm after suspected iatrogenic injury during a balloon thrombectomy. No amputations of the HAV implanted limb occurred over the 2-year period, and no HAV infections were reported in approximately 34 patient-years of continuous patient follow-up. CONCLUSIONS: Human tissue engineered blood vessels can be manufactured and readily available for peripheral arterial bypass surgery. Early clinical experience with these vessels, in the arterial position, suggest that they are safe, have acceptable patency, a low incidence of infection, and do not require the harvest of autologous vein or any cells from the recipient. Histologic examination of tissue biopsies revealed vascular remodeling and repopulation by host cells. This first-in-man arterial bypass study supports the continued development of human tissue engineered blood vessels for arterial reconstruction, and potential future expansion to clinical indications including vascular trauma and repair of other size-appropriate peripheral arteries.

Susceptibility of ePTFE vascular grafts and bioengineered human acellular vessels to infection.

BACKGROUND: Synthetic expanded polytetrafluorethylene (ePTFE) grafts are routinely used for vascular repair and reconstruction but prone to sustained bacterial infections. Investigational bioengineered human acellular vessels (HAVs) have shown clinical success and may confer lower susceptibility to infection. Here we directly compared the susceptibility of ePTFE grafts and HAV to bacterial contamination in a preclinical model of infection. MATERIALS AND METHODS: Sections (1 cm2) of ePTFE (n = 42) or HAV (n = 42) were inserted within bilateral subcutaneous pockets on the dorsum of rats and inoculated with Staphylococcus aureus (107 CFU/0.25 mL) or Escherichia coli (108 CFU/0.25 mL) before wound closure. Two weeks later, the implant sites were scored for abscess formation and explanted materials were halved for quantification of microbial recovery and histological analyses. RESULTS: The ePTFE implants had significantly higher abscess formation scores for both S. aureus and E. coli inoculations compared to that of HAV. In addition, significantly more bacteria were recovered from explanted ePTFE compared to HAV. Gram staining of explanted tissue sections revealed interstitial bacterial contamination within ePTFE, whereas no bacteria were identified in HAV tissue sections. Numerous CD45+ leukocytes, predominantly neutrophils, were found surrounding the ePTFE implants but minimal intact neutrophils were observed within the ePTFE matrix. The host cells surrounding and infiltrating the HAV explants were primarily nonleukocytes (CD45-). CONCLUSIONS: In an established animal model of infection, HAV was significantly less susceptible to bacterial colonization and abscess formation than ePTFE. The preclinical findings presented in this manuscript, combined with previously published clinical observations, suggest that bioengineered HAV may exhibit low rates of infection.

Bioengineered human acellular vessels for dialysis access in patients with end-stage renal disease: two phase 2 single-arm trials.

BACKGROUND: For patients with end-stage renal disease who are not candidates for fistula, dialysis access grafts are the best option for chronic haemodialysis. However, polytetrafluoroethylene arteriovenous grafts are prone to thrombosis, infection, and intimal hyperplasia at the venous anastomosis. We developed and tested a bioengineered human acellular vessel as a potential solution to these limitations in dialysis access. METHODS: We did two single-arm phase 2 trials at six centres in the USA and Poland. We enrolled adults with end-stage renal disease. A novel bioengineered human acellular vessel was implanted into the arms of patients for haemodialysis access. Primary endpoints were safety (freedom from immune response or infection, aneurysm, or mechanical failure, and incidence of adverse events), and efficacy as assessed by primary, primary assisted, and secondary patencies at 6 months. All patients were followed up for at least 1 year, or had a censoring event. These trials are registered with ClinicalTrials.gov, NCT01744418 and NCT01840956. FINDINGS: Human acellular vessels were implanted into 60 patients. Mean follow-up was 16 months (SD 7·6). One vessel became infected during 82 patient-years of follow-up. The vessels had no dilatation and rarely had post-cannulation bleeding. At 6 months, 63% (95% CI 47-72) of patients had primary patency, 73% (57-81) had primary assisted patency, and 97% (85-98) had secondary patency, with most loss of primary patency because of thrombosis. At 12 months, 28% (17-40) had primary patency, 38% (26-51) had primary assisted patency, and 89% (74-93) had secondary patency. INTERPRETATION: Bioengineered human acellular vessels seem to provide safe and functional haemodialysis access, and warrant further study in randomised controlled trials. FUNDING: Humacyte and US National Institutes of Health.

Evaluation of vascular repair by tissue-engineered human acellular vessels or expanded polytetrafluoroethylene grafts in a porcine model of limb ischemia and reperfusion.

BACKGROUND: This study evaluated performance of a tissue-engineered human acellular vessel (HAV) in a porcine model of acute vascular injury and ischemia. The HAV is an engineered blood vessel consisted of human vascular extracellular matrix proteins. Limb reperfusion and vascular outcomes of the HAV were compared with those from synthetic expanded polytetrafluoroethylene (ePTFE) grafts. METHODS: Thirty-six pigs were randomly assigned to four treatment groups, receiving either the HAV or a PTFE graft following a hind limb ischemia period of either 0 or 6 hours. All grafts were 3-cm-long interposition 6-mm diameter grafts implanted within the right iliac artery. Animals were not immunosuppressed and followed for up to 28 days after surgery. Assessments performed preoperatively and postoperatively included evaluation of graft patency, hind limb function, and biochemical markers of tissue ischemia or reperfusion injury. Histological analysis was performed on explants to assess host cell responses. RESULTS: Postoperative gait assessment and biochemical analysis confirmed that ischemia and reperfusion injury were caused by 6-hour ischemia, regardless of vascular graft type. Hind limb function and tissue damage biomarkers improved in all groups postoperatively. Final patency rates at postoperative day 28 were higher for HAV than for ePTFE graft in both the 0-hour (HAV, 85.7%; ePTFE, 66.7%) and 6-hour (HAV, 100%; ePTFE, 75%) ischemia groups, but these differences were not statistically significant. Histological analyses identified some intimal hyperplasia and host reactivity to the xenogeneic HAV and also to the synthetic ePTFE graft. Positive host integration and vascular cell infiltration were identified in HAV but not ePTFE explants. CONCLUSION: Based on the functional performance and the histologic profile of explanted HAVs, this study supports further investigation to evaluate long-term performance of the HAV when used to repair traumatic vascular injuries.

Biological mechanisms of infection resistance in tissue engineered blood vessels compared to synthetic expanded polytetrafluoroethylene grafts.

Objective: Synthetic expanded polytetrafluoroethylene (ePTFE) grafts are known to be susceptible to bacterial infection. Results from preclinical and clinical studies of bioengineered human acellular vessels (HAVs) have shown relatively low rates of infection. This study evaluates the interactions of human neutrophils and bacteria with ePTFE and HAV vascular conduits to determine whether there is a correlation between neutrophil-conduit interactions and observed differences of their infectivity in vivo. Methods: A phase III comparative clinical study between investigational HAVs (n = 177) and commercial ePTFE grafts (n = 178) used for hemodialysis access (ClinicalTrials.gov Identifier: NCT02644941) was evaluated for conduit infection rates followed by histological analyses of HAV and ePTFE tissue explants. The clinical histopathology of HAV and ePTFE conduits reported to be infected was compared with immunohistochemistry of explanted materials from a preclinical model of bacterial contamination. Mechanistic in vitro studies were then conducted using isolated human neutrophils seeded directly onto HAV and ePTFE materials to analyze neutrophil viability, morphology, and function. Results: Clinical trial results showed that the HAV had a significantly lower (0.93%; P = .0413) infection rate than that of ePTFE (4.54%). Histological analysis of sections from infected grafts explanted approximately 1 year after implantation revealed gram-positive bacteria near cannulation sites. Immunohistochemistry of HAV and ePTFE implanted in a well-controlled rodent infection model suggested that the ePTFE matrix permitted bacterial infiltration and colonization but may be inaccessible to neutrophils. In the same model, the HAV showed host recellularization and lacked detectable bacteria at the 2-week explant. In vitro results demonstrated that the viability of human neutrophils decreased significantly upon exposure to ePTFE, which was associated with neutrophil elastase release in the absence of bacteria. In contrast, neutrophils exposed to the HAV material retained high viability and native morphology. Cocultures of neutrophils and Staphylococcus aureus on the conduit materials demonstrated that neutrophils were more effective at ensnaring and degrading bacteria on the HAV than on ePTFE. Conclusions: The HAV material seems to demonstrate a resistance to bacterial infection. This infection resistance is likely due to the HAV's native-like material composition, which may be more biocompatible with host neutrophils than synthetic vascular graft material.

Six-year outcomes of a phase II study of human-tissue engineered blood vessels for peripheral arterial bypass.

Objective: The human acellular vessel (HAV) was evaluated for surgical bypass in a phase II study. The primary results at 24 months after implantation have been reported, and the patients will be evaluated for ≤10 years. Methods: In the present report, we have described the 6-year results of a prospective, open-label, single-treatment arm, multicenter study. Patients with advanced peripheral artery disease (PAD) requiring above-the-knee femoropopliteal bypass surgery without available autologous graft options had undergone implantation with the HAV, a bioengineered human tissue replacement blood vessel. The patients who completed the 24-month primary portion of the study will be evaluated for ≤10 years after implantation. The present mid-term analysis was performed at the 6-year milestone (72 months) for patients followed up for 24 to 72 months. Results: HAVs were implanted in 20 patients at three sites in Poland. Seven patients had discontinued the study before completing the 2-year portion of the study: four after graft occlusion had occurred and three who had died of causes deemed unrelated to the conduit, with the HAV reported as functional at their last visit. The primary results at 24 months showed primary, primary assisted, and secondary patency rates of 58%, 58%, and 74%, respectively. One vessel had developed a pseudoaneurysm deemed possibly iatrogenic; no other signs of structural failure were reported. No rejections or infections of the HAV occurred, and no patient had required amputation of the implanted limb. Of the 20 patients, 13 had completed the primary portion of the study; however, 1 patient had died shortly after 24 months. Of the remaining 12 patients, 3 died of causes unrelated to the HAV. One patient had required thrombectomy twice, with secondary patency achieved. No other interventions were recorded between 24 and 72 months. At 72 months, five patients had a patent HAV, including four patients with primary patency. For the entire study population from day 1 to month 72, the overall primary, primary assisted, and secondary patency rate estimated using Kaplan-Meier analysis was 44%, 45%, and 60% respectively, with censoring for death. No patient had experienced rejection or infection of the HAV, and no patient had required amputation of the implanted limb. Conclusions: The infection-resistant, off-the-shelf HAV could provide a durable alternative conduit in the arterial circuit setting to restore the lower extremity blood supply in patients with PAD, with remodeling into the recipient's own vessel over time. The HAV is currently being evaluated in seven clinical trials to treat PAD, vascular trauma, and as a hemodialysis access conduit.

Evaluation of tissue-engineered human acellular vessels as a Blalock-Taussig-Thomas shunt in a juvenile primate model.

Objectives: Palliative treatment of cyanotic congenital heart disease (CCHD) uses systemic-to-pulmonary conduits, often a modified Blalock-Taussig-Thomas shunt (mBTTs). Expanded polytetrafluoroethylene (ePTFE) mBTTs have associated risks for thrombosis and infection. The Human Acellular Vessel (HAV) (Humacyte, Inc) is a decellularized tissue-engineered blood vessel currently in clinical trials in adults for vascular trauma, peripheral artery disease, and end-stage renal disease requiring hemodialysis. In addition to restoring blood flow, the engineered HAV demonstrates the capacity for host cellular remodeling into native-like vasculature. Here we report preclinical evaluation of a small-diameter (3.5 mm) HAV as a mBTTs in a non-human primate model. Methods: We implanted 3.5 mm HAVs as right subclavian artery to pulmonary artery mBTTs in non-immunosuppressed juvenile rhesus macaques (n = 5). HAV patency, structure, and blood flow were assessed by postoperative imaging from 1 week to 6 months. Histology of HAVs and surrounding tissues was performed. Results: Surgical procedures were well tolerated, with satisfactory anastomoses, showing feasibility of using the 3.5 mm HAV as a mBTTs. All macaques had some immunological reactivity to the human extracellular matrix, as expected in this xenogeneic model. HAV mBTTs remained patent for up to 6 months in animals, exhibiting mild immunoreactivity. Two macaques displaying more severe immunoreactivity to the human HAV material developed midgraft dilatation without bleeding or rupture. HAV repopulation by host cells expressing smooth muscle and endothelial markers was observed in all animals. Conclusions: These findings may support use of 3.5 mm HAVs as mBTTs in CCHD and potentially other pediatric vascular indications.

IFATS collection: Adipose-derived stromal cells improve the foreign body response.

Many implanted devices fail due to the formation of an avascular capsule surrounding the device. Additionally, fat has long been known to promote healing and vascularization. The goals of this study were to identify potential mechanisms of the provascular actions of adipose-derived stromal cells (ASCs) and to improve implant biocompatibility. First, adult ASCs and fibroblasts from rats were attached to polyurethane and polystyrene in vitro and their cytokine secretion profile was analyzed. Secretion of vascular endothelial growth factor (VEGF) from ASCs was 10-70 times higher than fibroblasts after 3 and 6 days. Next, polyurethane, bare and with cellular coatings, was implanted subcutaneously in rats. The fibrous capsule surrounding bare polyurethane implants was 17%-32% thicker and the amount of collagen was 27% greater than the capsule surrounding ASC-coated implants. Finally, the microvessel density adjacent to ASC-coated polyurethane was approximately 50%-80% higher than bare polyurethane. In summary, ASCs attached to polyurethane have a dramatically increased VEGF production compared with fibroblasts in vitro, and these cells also produce an increased microvessel density in the surrounding tissue when implanted subcutaneously in rats. Disclosure of potential conflicts of interest is found at the end of this article.

Bioengineered human acellular vessels recellularize and evolve into living blood vessels after human implantation.

Traditional vascular grafts constructed from synthetic polymers or cadaveric human or animal tissues support the clinical need for readily available blood vessels, but often come with associated risks. Histopathological evaluation of these materials has shown adverse host cellular reactions and/or mechanical degradation due to insufficient or inappropriate matrix remodeling. We developed an investigational bioengineered human acellular vessel (HAV), which is currently being studied as a hemodialysis conduit in patients with end-stage renal disease. In rare cases, small samples of HAV were recovered during routine surgical interventions and used to examine the temporal and spatial pattern of the host cell response to the HAV after implantation, from 16 to 200 weeks. We observed a substantial influx of alpha smooth muscle actin (αSMA)-expressing cells into the HAV that progressively matured and circumferentially aligned in the HAV wall. These cells were supported by microvasculature initially formed by CD34+/CD31+ cells in the neoadventitia and later maintained by CD34-/CD31+ endothelial cells in the media and lumen of the HAV. Nestin+ progenitor cells differentiated into either αSMA+ or CD31+ cells and may contribute to early recellularization and self-repair of the HAV. A mesenchymal stem cell-like CD90+ progenitor cell population increased in number with duration of implantation. Our results suggest that host myogenic, endothelial, and progenitor cell repopulation of HAVs transforms these previously acellular vessels into functional multilayered living tissues that maintain blood transport and exhibit self-healing after cannulation injury, effectively rendering these vessels like the patient's own blood vessel.

Adult adipose-derived stem cell attachment to biomaterials.

Attachment of adipose-derived stem cells (ASCs) to biomaterials prior to implantation is a possible strategy for mediating inflammation and wound healing. In this study, the ASC percent coverage was measured on common medical grade biosensor materials subjected to different surface treatments. Cell coverage on silicone elastomer (poly-dimethylsiloxane) was below 20% for all surface treatments. Polyimide (Kapton), polyurethane (Pellethane) and tissue culture polystyrene all exhibited >50% coverage for surfaces treated with fibronectin (Fn), fibronectin plus avidin/biotin (dual ligand), and oxygen plasma plus fibronectin treatments (FnO2). The fibronectin treatment performed as well or better on polyimide, polyurethane, and tissue culture polystyrene compared to the dual ligand and fibronectin oxygen plasma-treated surfaces. Cell detachment with increasing shear stresses was <25% for each attachment method on both polyimide and polyurethane. The effects of attachment methods on the basic cell functions of proliferation, metabolism, ATP concentration, and caspase-3 activity were analyzed yielding proliferation profiles that were very similar among all of the materials. No significant differences in metabolism, intracellular ATP, or intracellular caspase-3 activity were observed for any of the attachment methods on either polyimide or polyurethane.

Reduced foreign body response at nitric oxide-releasing subcutaneous implants.

The tissue response to nitric oxide (NO)-releasing subcutaneous implants is presented. Model implants were created by coating silicone elastomer with diazeniumdiolate-modified xerogel polymers capable of releasing NO. The host tissue response to such implants was evaluated at 1, 3, and 6 weeks and compared to that of uncoated silicone elastomer blanks and xerogel-coated controls incapable of releasing NO. Delivery of NO (approximately 1.35 micromol/cm2 of implant surface area) reduced foreign body collagen capsule ("scar tissue") thickness by >50% compared to uncoated silicone elastomer after 3 weeks. The chronic inflammatory response at the tissue/implant interface was also reduced by >30% at NO-releasing implants after 3 and 6 weeks. Additionally, CD-31 immunohistochemical staining revealed approximately 77% more blood vessels in proximity to NO-releasing implants after 1 week compared to controls. These findings suggest that conferring NO release to subcutaneous implants may promote effective device integration into healthy vascularized tissue, diminish foreign body capsule formation, and improve the performance of indwelling medical devices that require constant mass transport of analytes (e.g., implantable sensors).

Inhibition of implant-associated infections via nitric oxide release.

The in vivo antibacterial activity of nitric oxide (NO)-releasing xerogel coatings was evaluated against an aggressive subcutaneous Staphylococcus aureus infection in a rat model. The NO-releasing implants were created by coating a medical-grade silicone elastomer with a sol-gel-derived (xerogel) film capable of storing NO. Four of the bare or xerogel-coated silicone materials were subcutaneously implanted into male rats. Ten rats were administered 10 microl of a 10(8) cfuml(-1)S. aureus colony directly into the subcutaneous pocket with the implant prior to wound closure. Infection was quantitatively and qualitatively evaluated after 8d of implantation with microbiological and histological methods, respectively. A 82% reduction in the number of infected implants was achieved with the NO-releasing coating. Histology revealed that the capsule formation around infected bare silicone rubber controls was immunoactive and that a biofilm may have formed. Capsule formation in response to NO-releasing implants had greater vascularity in comparison with uninoculated or untreated controls. These results suggest that NO-releasing coatings may dramatically reduce the incidence of biomaterial-associated infection.

An early study on the mechanisms that allow tissue-engineered vascular grafts to resist intimal hyperplasia.

Intimal hyperplasia is one of the prominent failure mechanisms for arteriovenous fistulas and arteriovenous access grafts. Human tissue-engineered vascular grafts (TEVGs) were implanted as arteriovenous grafts in a novel baboon model. Ultrasound was used to monitor flow rates and vascular diameters throughout the study. Intimal hyperplasia in the outflow vein of TEVGs was assessed at the anastomosis and at juxta-anastomotic regions via histological analysis, and was compared to intimal hyperplasia with polytetrafluoroethylene (PTFE) grafts in the baboon model and in literature reports from other animal models. Less venous intimal hyperplasia was observed in histological sections with arteriovenous TEVGs than with arteriovenous PTFE grafts. TEVGs were associated with a mild, noninflammatory intimal hyperplasia. The extent of intimal tissue that formed with TEVG placement correlated with the rate of blood flow through tissue engineered vascular grafts at 2 weeks postimplant. Outflow vein dilatation was observed with increased flow rate. Both mid-graft flow rates and outflow vein diameters reached a plateau by week 4, which suggested that venous remodeling and intimal hyperplasia largely occurred within the first 4 weeks of implant in the baboon model. Given their compliant and noninflammatory nature, TEVGs appear resistant to triggers for venous intimal hyperplasia that are common for PTFE arteriovenous grafts, including (1) abundant proinflammatory macrophage populations that are associated with PTFE grafts and (2) compliance mismatch between PTFE grafts and the outflow vein. Our findings suggest that arteriovenous TEVGs develop only a mild form of venous intimal hyperplasia, which results from the typical hemodynamic changes that are associated with arteriovenous settings.

Readily available tissue-engineered vascular grafts.

Autologous or synthetic vascular grafts are used routinely for providing access in hemodialysis or for arterial bypass in patients with cardiovascular disease. However, some patients either lack suitable autologous tissue or cannot receive synthetic grafts. Such patients could benefit from a vascular graft produced by tissue engineering. Here, we engineer vascular grafts using human allogeneic or canine smooth muscle cells grown on a tubular polyglycolic acid scaffold. Cellular material was removed with detergents to render the grafts nonimmunogenic. Mechanical properties of the human vascular grafts were similar to native human blood vessels, and the grafts could withstand long-term storage at 4 °C. Human engineered grafts were tested in a baboon model of arteriovenous access for hemodialysis. Canine grafts were tested in a dog model of peripheral and coronary artery bypass. Grafts demonstrated excellent patency and resisted dilatation, calcification, and intimal hyperplasia. Such tissue-engineered vascular grafts may provide a readily available option for patients without suitable autologous tissue or for those who are not candidates for synthetic grafts.

Bioluminescence imaging of glucose in tissue surrounding polyurethane and glucose sensor implants.

BACKGROUND: The bioluminescence technique was used to quantify the local glucose concentration in the tissue surrounding subcutaneously implanted polyurethane material and surrounding glucose sensors. In addition, some implants were coated with a single layer of adipose-derived stromal cells (ASCs) because these cells improve the wound-healing response around biomaterials. METHODS: Control and ASC-coated implants were implanted subcutaneously in rats for 1 or 8 weeks (polyurethane) or for 1 week only (glucose sensors). Tissue biopsies adjacent to the implant were immediately frozen at the time of explant. Cryosections were assayed for glucose concentration profile using the bioluminescence technique. RESULTS: For the polyurethane samples, no significant differences in glucose concentration within 100 µm of the implant surface were found between bare and ASC-coated implants at 1 or 8 weeks. A glucose concentration gradient was demonstrated around the glucose sensors. For all sensors, the minimum glucose concentration of approximately 4 mM was found at the implant surface and increased with distance from the sensor surface until the glucose concentration peaked at approximately 7 mM at 100 µm. Then the glucose concentration decreased to 5.5-6.5 mM more than 100 µmm from the surface. CONCLUSIONS: The ASC attachment to polyurethane and to glucose sensors did not change the glucose profiles in the tissue surrounding the implants. Although most glucose sensors incorporate a diffusion barrier to reduce the gradient of glucose and oxygen in the tissue, it is typically assumed that there is no steep glucose gradient around the sensors. However, a glucose gradient was observed around the sensors. A more complete understanding of glucose transport and concentration gradients around sensors is critical.

Combined bone allograft and adipose-derived stem cell autograft in a rabbit model.

Currently available options for the repair of bony defects have substantial limitations. Much work has looked to the possibility of engineering bone using stem cells. These tissue-engineering efforts have focused on calvarial defect models, which have the advantages of minimal load-bearing and a large surface area. This study aims to solve the somewhat more challenging problem of repairing segmental bony defects such as those of the mandible and long bones. Four groups of decellularized bone tubes with cortical perforations were implanted subcutaneously in a rabbit model: empty bone tubes, bone tubes containing fibrin glue alone, bone tubes containing fibrin glue and freshly isolated autologous adipose-derived stem cells (ASCs), and bone tubes containing fibrin glue and predifferentiated autologous ASCs. Results showed a foreign body response characterized by fibrous capsule formation with minimal angiogenesis and no evidence of osteoblastic activity. Substantial changes are needed if this model is to become viable.