Controlling light emission by a thermalized ensemble of colloidal quantum dots with a metasurface.

We report an experimental and theoretical study of light emission by a patterned ensemble of colloidal quantum dots (cQDs). This system modifies drastically the emission spectrum and polarization as compared to a planar layer of cQDs. It exhibits bright, directional and polarized emission including a degree of circular polarization in some directions. We introduce a model of light emission based on a local Kirchhoff law which reproduces accurately all the features of the experiment. The model provides a figure of merit to assess quantitatively the emitted power. This work paves the way to the systematic design of efficient ultrathin light emitting metasurfaces with controlled polarization, spectrum and directivity.

Room-Temperature Strong Coupling of CdSe Nanoplatelets and Plasmonic Hole Arrays.

Exciton polaritons are hybrid light-matter quasiparticles that can serve as coherent light sources. Motivated by applications, room-temperature realization of polaritons requires narrow, excitonic transitions with large transition dipoles. Such transitions must then be strongly coupled to an electromagnetic mode confined in a small volume. While much work has explored polaritons in organic materials, semiconductor nanocrystals present an alternative excitonic system with enhanced photostability and spectral tunability. In particular, quasi-two-dimensional nanocrystals known as nanoplatelets (NPLs) exhibit intense, spectrally narrow excitonic transitions useful for polariton formation. Here, we place CdSe NPLs on silver hole arrays to demonstrate exciton-plasmon polaritons at room temperature. Angle-resolved reflection spectra reveal Rabi splittings up to 149 meV for the polariton states. We observe bright, polarized emission arising from the lowest polariton state. Furthermore, we assess the dependence of the Rabi splitting on the hole-array pitch and the number N of NPLs. While the pitch determines the in-plane momentum for which strong coupling is observed, it does not affect the size of the splitting. The Rabi splitting first increases with NPL film thickness before eventually saturating. Instead of the commonly used [Formula: see text] dependence, we develop an analytical expression that includes the transverse confinement of the plasmon modes to describe the measured Rabi splitting as a function of NPL film thickness.

Colloidal-Quantum-Dot Ring Lasers with Active Color Control.

To improve the photophysical performance of colloidal quantum dots for laser applications, sophisticated core/shell geometries have been developed. Typically, a wider bandgap semiconductor is added as a shell to enhance the gain from the quantum-dot core. This shell is designed to electronically isolate the core, funnel excitons to it, and reduce nonradiative Auger recombination. However, the shell could also potentially provide a secondary source of gain, leading to further versatility in these materials. Here we develop high-quality quantum-dot ring lasers that not only exhibit lasing from both the core and the shell but also the ability to switch between them. We fabricate ring resonators (with quality factors up to ∼2500) consisting only of CdSe/CdS/ZnS core/shell/shell quantum dots using a simple template-stripping process. We then examine lasing as a function of the optical excitation power and ring radius. In resonators with quality factors >1000, excitons in the CdSe cores lead to red lasing with thresholds at ∼25 µJ/cm2. With increasing power, green lasing from the CdS shell emerges (>100 µJ/cm2) and then the red lasing begins to disappear (>250 µJ/cm2). We present a rate-equation model that can explain this color switching as a competition between exciton localization into the core and stimulated emission from excitons in the shell. Moreover, by lowering the quality factor of the cavity we can engineer the device to exhibit only green lasing. The mechanism demonstrated here provides a potential route toward color-switchable quantum-dot lasers.

An intrinsic growth instability in isotropic materials leads to quasi-two-dimensional nanoplatelets.

Colloidal nanoplatelets are atomically flat, quasi-two-dimensional sheets of semiconductor that can exhibit efficient, spectrally pure fluorescence. Despite intense interest in their properties, the mechanism behind their highly anisotropic shape and precise atomic-scale thickness remains unclear, and even counter-intuitive for commonly studied nanoplatelets that arise from isotropic crystal structures (such as zincblende CdSe and lead halide perovskites). Here we show that an intrinsic instability in growth kinetics can lead to such highly anisotropic shapes. By combining experimental results on the synthesis of CdSe nanoplatelets with theory predicting enhanced growth on narrow surface facets, we develop a model that explains nanoplatelet formation as well as observed dependencies on time and temperature. Based on standard concepts of volume, surface and edge energies, the resulting growth instability criterion can be directly applied to other crystalline materials. Thus, knowledge of this previously unknown mechanism for controlling shape at the nanoscale can lead to broader libraries of quasi-two-dimensional materials.

Direct Patterning of Colloidal Quantum-Dot Thin Films for Enhanced and Spectrally Selective Out-Coupling of Emission.

We report on a template-stripping method for the direct surface patterning of colloidal quantum-dot thin films to produce highly luminescent structures with feature sizes less than 100 nm. Through the careful design of high quality bull's-eye gratings we can produce strong directional beaming (10° divergence) with up to 6-fold out-coupling enhancement of spontaneous emission in the surface-normal direction. A transition to narrow single-mode lasing is observed in these same structures at thresholds as low as 120 µJ/cm2. In addition, we demonstrate that these structures can be fabricated on flexible substrates. Finally, making use of the size-tunable character of colloidal quantum dots, we demonstrate spectrally selective out-coupling of light from mixed quantum-dot films. Our results provide a straightforward route toward significantly improved optical properties of colloidal quantum-dot assemblies.

Wedge Waveguides and Resonators for Quantum Plasmonics.

Plasmonic structures can provide deep-subwavelength electromagnetic fields that are useful for enhancing light-matter interactions. However, because these localized modes are also dissipative, structures that offer the best compromise between field confinement and loss have been sought. Metallic wedge waveguides were initially identified as an ideal candidate but have been largely abandoned because to date their experimental performance has been limited. We combine state-of-the-art metallic wedges with integrated reflectors and precisely placed colloidal quantum dots (down to the single-emitter level) and demonstrate quantum-plasmonic waveguides and resonators with performance approaching theoretical limits. By exploiting a nearly 10-fold improvement in wedge-plasmon propagation (19 µm at a vacuum wavelength, λvac, of 630 nm), efficient reflectors (93%), and effective coupling (estimated to be >70%) to highly emissive (~90%) quantum dots, we obtain Ag plasmonic resonators at visible wavelengths with quality factors approaching 200 (3.3 nm line widths). As our structures offer modal volumes down to ~0.004λvac(3) in an exposed single-mode waveguide-resonator geometry, they provide advantages over both traditional photonic microcavities and localized-plasmonic resonators for enhancing light-matter interactions. Our results confirm the promise of wedges for creating plasmonic devices and for studying coherent quantum-plasmonic effects such as long-distance plasmon-mediated entanglement and strong plasmon-matter coupling.

Reduced dielectric screening and enhanced energy transfer in single- and few-layer MoS2.

We report highly efficient nonradiative energy transfer from cadmium selenide (CdSe) quantum dots to monolayer and few-layer molybdenum disulfide (MoS2). The quenching of the donor quantum dot photoluminescence increases as the MoS2 flake thickness decreases with the highest efficiency (>95%) observed for monolayer MoS2. This counterintuitive result arises from reduced dielectric screening in thin layer semiconductors having unusually large permittivity and a strong in-plane transition dipole moment, as found in MoS2. Excitonic energy transfer between a zero-dimensional emitter and a two-dimensional absorber is fundamentally interesting and enables a wide range of applications including broadband optical down-conversion, optical detection, photovoltaic sensitization, and color shifting in light-emitting devices.

Subdiffusive exciton transport in quantum dot solids.

Colloidal quantum dots (QDs) are promising materials for use in solar cells, light-emitting diodes, lasers, and photodetectors, but the mechanism and length of exciton transport in QD materials is not well understood. We use time-resolved optical microscopy to spatially visualize exciton transport in CdSe/ZnCdS core/shell QD assemblies. We find that the exciton diffusion length, which exceeds 30 nm in some cases, can be tuned by adjusting the inorganic shell thickness and organic ligand length, offering a powerful strategy for controlling exciton movement. Moreover, we show experimentally and through kinetic Monte Carlo simulations that exciton diffusion in QD solids does not occur by a random-walk process; instead, energetic disorder within the inhomogeneously broadened ensemble causes the exciton diffusivity to decrease over time. These findings reveal new insights into exciton dynamics in disordered systems and demonstrate the flexibility of QD materials for photonic and optoelectronic applications.

In situ transmission electron microscopy imaging of electromigration in platinum nanowires.

In situ transmission electron microscopy was performed on the electromigration in platinum (Pt) nanowires (14 nm thick, 200 nm wide, and 300 nm long) with and without feedback control. Using the feedback control mode, symmetric electrodes are obtained and the gap usually forms at the center of the Pt nanowire. Without feedback control, asymmetric electrodes are formed, and the gap can occur at any position along the wire. The three-dimensional gap geometries of the electrodes in the Pt nanowire were determined using high-angle annular dark-field scanning transmission electron microscopy; the thickness of the nanowire is reduced from 14 nm to only a few atoms at the edge with a gap of about 5-10 nm.

Fast and efficient photodetection in nanoscale quantum-dot junctions.

We report on a photodetector in which colloidal quantum dots directly bridge nanometer-spaced electrodes. Unlike in conventional quantum-dot thin film photodetectors, charge mobility no longer plays a role in our quantum-dot junctions as charge extraction requires only two individual tunnel events. We find an efficient photoconductive gain mechanism with external quantum efficiencies of 38 electrons-per-photon in combination with response times faster than 300 ns. This compact device-architecture may open up new routes for improved photodetector performance in which efficiency and bandwidth do not go at the cost of one another.

Boosting the efficiency of transient photoluminescence microscopy using cylindrical lenses.

Transient Photoluminescence Microscopy (TPLM) allows for the direct visualization of carrier transport in semiconductor materials with sub nanosecond and few nanometer resolution. The technique is based on measuring changes in the spatial distribution of a diffraction limited population of carriers using spatiotemporal detection of the radiative decay of the carriers. The spatial resolution of TPLM is therefore primarily determined by the signal-to-noise-ratio (SNR). Here we present a method using cylindrical lenses to boost the signal acquisition in TPLM experiments. The resulting asymmetric magnification of the photoluminescence emission of the diffraction limited spot can increase the collection efficiency by more than a factor of 10, significantly reducing acquisition times and further boosting spatial resolution.

Room-temperature gating of molecular junctions using few-layer graphene nanogap electrodes.

We report on a method to fabricate and measure gateable molecular junctions that are stable at room temperature. The devices are made by depositing molecules inside a few-layer graphene nanogap, formed by feedback controlled electroburning. The gaps have separations on the order of 1-2 nm as estimated from a Simmons model for tunneling. The molecular junctions display gateable I-V-characteristics at room temperature.

Broadband-tunable spectral response of perovskite-on-paper photodetectors using halide mixing.

Paper offers a low-cost and widely available substrate for electronics. It possesses alternative characteristics to silicon, as it shows low density and high flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-prepare perovskite-on-paper photodetectors with a broadband-tunable spectral response. From the bandgap tunability of halide-mixed perovskites we create photodetectors with a cut-off spectral onset that ranges from the NIR to the green region, by increasing the bromide content on MAPb(I1-xBrx)3 perovskite alloys. The devices show a fast and efficient response. The best performances are observed for pure I and Br perovskite compositions, with a maximum responsivity of ∼400 mA W-1 on the MAPbBr3 device. This study provides an example of the wide range of possibilities that the combination of solution processable materials with paper substrates offers for the development of low-cost, biodegradable and easy-to-prepare devices.

Polarization-based colour tuning of mixed colloidal quantum-dot thin films using direct patterning.

Colloidal quantum-dots (cQDs) are finding increasingly widespread application in photonics and optoelectronics, providing high brightness and record-wide colour gamuts. However, the external quantum efficiencies in thin-film device architectures are still limited due to losses into waveguide modes and different strategies are being explored to promote the outcoupling of emission. Here we use a template-stripping-based direct-patterning strategy to fabricate linear gratings at the surface of cQD thin films. The linear gratings enhance optical outcoupling through Bragg scattering, yielding bright emission with a strong degree of linear polarization. By patterning linear gratings with different periodicities and orientations onto a film of mixed-colour cQDs, we demonstrate polarization-based active colour tuning of the thin-film emission.

Halide Mixing Inhibits Exciton Transport in Two-dimensional Perovskites Despite Phase Purity.

Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites. However, halide mixing has commonly been observed to result in phase segregation, which reduces excited-state transport and limits device performance. While the current emphasis lies on the development of strategies to prevent phase segregation, it remains unclear how halide mixing may affect excited-state transport even if phase purity is maintained. Here, we study exciton transport in phase pure mixed-halide 2D perovskites of (PEA)2Pb(I1-x Br x )4. Using transient photoluminescence microscopy, we show that, despite phase purity, halide mixing inhibits exciton transport. We find a significant reduction even for relatively low alloying concentrations. By performing Brownian dynamics simulations, we are able to reproduce our experimental results and attribute the decrease in diffusivity to the energetically disordered potential landscape that arises due to the intrinsic random distribution of alloying sites.

Platinum-nanogaps for single-molecule electronics: room-temperature stability.

We present the formation of single-molecule devices based on nanometre-spaced platinum electrodes. The electrodes are fabricated using a self-breaking electromigration method which yields nanogaps with long-term stability at room temperature [Prins et al., APL, 2009, 94, 123108.]. The stability at room temperature allows for detailed comparison of the device electrical properties before and after deposition of the molecules. In this way, conductance as a result of direct tunneling between the electrodes can be distinguished from conductance through the molecule. After molecule deposition, some devices display transport in the strong coupling regime while others are in the weak-coupling Coulomb blockade regime. Gated transport is observed in the latter case.

Efficient interlayer exciton transport in two-dimensional metal-halide perovskites.

Two-dimensional (2D) metal-halide perovskites are attractive for use in light harvesting and light emitting devices, presenting improved stability as compared to the more conventional three-dimensional perovskite phases. Significant attention has been paid to influencing the layer orientation of 2D perovskite phases, with the charge-carrier transport through the plane of the material being orders of magnitude more efficient than the interlayer transport. Importantly though, the thinnest members of the 2D perovskite family exhibit strong exciton binding energies, suggesting that interlayer energy transport mediated by dipole-dipole coupling may be relevant. We present transient microscopy measurements of the interlayer energy transport in the (PEA)2PbI4 perovskite. We find efficient interlayer exciton transport (0.06 cm2 s-1), which translates into a diffusion length that exceeds 100 nm and a sub-ps timescale for energy transfer. While still slower than the in-plane exciton transport (0.2 cm2 s-1), our results show that excitonic energy transport is considerably less anisotropic than charge-carrier transport for 2D perovskites.

Exciton diffusion in two-dimensional metal-halide perovskites.

Two-dimensional layered perovskites are attracting increasing attention as more robust analogues to the conventional three-dimensional metal-halide perovskites for both light harvesting and light emitting applications. However, the impact of the reduced dimensionality on the optoelectronic properties remains unclear, particularly regarding the spatial dynamics of the excitonic excited state within the two-dimensional plane. Here, we present direct measurements of exciton transport in single-crystalline layered perovskites. Using transient photoluminescence microscopy, we show that excitons undergo an initial fast diffusion through the crystalline plane, followed by a slower subdiffusive regime as excitons get trapped. Interestingly, the early intrinsic diffusivity depends sensitively on the choice of organic spacer. A clear correlation between lattice stiffness and diffusivity is found, suggesting exciton-phonon interactions to be dominant in the spatial dynamics of the excitons in perovskites, consistent with the formation of exciton-polarons. Our findings provide a clear design strategy to optimize exciton transport in these systems.

Template Stripping of Perovskite Thin Films for Dry Interfacing and Surface Structuring.

Combining excellent optoelectronic properties with the benefits of solution processability, metal-halide perovskites are promising materials for photovoltaic and light-emitting technologies. To facilitate the integration of perovskite thin films into optoelectronic devices, a need exists for simple and efficient fabrication methods. Here, we present a template-stripping technique to produce ultraflat and flexible perovskite thin films. We apply a one-step spin-coating procedure to produce high-quality CH3NH3PbBr3 perovskite thin films on top of ultraflat silicon templates. These films can be mechanically cleaved from the template using a polymer adhesive to reveal the ultraflat perovskite surfaces. We demonstrate how the flatness and flexibility of the template-stripped films enable new processing strategies based on dry interfacing, by interfacing them with plasmonic hole arrays. Moreover, we show that by using prepatterned silicon templates, structured perovskite surfaces can be produced with feature sizes down to a micrometer.