Visible Light Motivated the Photocatalytic Degradation of P-Nitrophenol by Ca2+-Doped AgInS2.

4-Nitrophenol (4-NP) is considered a priority organic pollutant with high toxicity. Many authors have been committed to developing efficient, green, and environmentally friendly technological processes to treat wastewater containing 4-NP. Here, we investigated how the addition of Ca2+ affects the catalytic degradation of 4-NP with AgInS2 when exposed to light. We synthesized AgInS2 (AIS) and Ca2+-doped AgInS2 (Ca-AIS) with varying amounts of Ca2+ using a low-temperature liquid phase method. The SEM, XRD, XPS, HRTEM, BET, PL, and UV-Vis DRS characteristics were employed to analyze the structure, morphology, and optical properties of the materials. The effects of different amounts of Ca2+ on the photocatalytic degradation of 4-NP were investigated. Under visible light illumination for a duration of 120 min, a degradation rate of 63.2% for 4-Nitrophenol (4-NP) was achieved. The results showed that doping with an appropriate amount of Ca2+ could improve the visible light catalytic activity of AIS. This work provides an idea for finding suitable cheap alkaline earth metal doping agents to replace precious metals for the improvement of photocatalytic activities.

Correction: Wang et al. Visible Light Motivated the Photocatalytic Degradation of P-Nitrophenol by Ca2+-Doped AgInS2. Molecules 2024, 29, 361.

In the original publication [...].

Visible Light Photoactivity of g-C3N4/MoS2 Nanocomposites for Water Remediation of Hexavalent Chromium.

Water pollution has becoming an increasingly serious issue, and it has attracted a significant amount of attention from scholars. Here, in order remove heavy metal hexavalent chromium (Cr (VI)) from wastewater, graphitic carbon nitride (g-C3N4) was modified with molybdenum disulfide (MoS2) at different mass ratios via an ultrasonic method to synthesize g-C3N4/MoS2 (CNM) nanocomposites as photocatalysts. The nanocomposites displayed efficient photocatalytic removal of toxic hexavalent chromium (Cr (VI)) from water under UV, solar, and visible light irradiation. The CNM composite with a 1:2 g-C3N4 to MoS2 ratio achieved optimal 91% Cr (VI) removal efficiency at an initial 20 mg/L Cr (VI) concentration and pH 3 after 120 min visible light irradiation. The results showed a high pH range and good recycling stability. The g-C3N4/MoS2 nanocomposites exhibited higher performance compared to pure g-C3N4 due to the narrowed band gap of the Z-scheme heterojunction structure and effective separation of photo-generated electron-hole pairs, as evidenced by structural and optical characterization. Overall, the ultrasonic synthesis of g-C3N4/MoS2 photocatalysts shows promise as an efficient technique for enhancing heavy metal wastewater remediation under solar and visible light.

Effects of Tea Polyphenols and Theaflavins on Three Oral Cariogenic Bacteria.

In order to investigate the antibacterial mechanism of tea polyphenols and theaflavins against oral cariogenic bacteria, the pH value of the culture medium, the number of bacteria adhering to the smooth glass tube wall, and the electrical conductivity value within 10 h were measured, respectively. The effects of four concentrations of tea polyphenols and theaflavins below the MIC value were studied on acid production, adhesion, and electrical conductivity of oral cariogenic bacteria. The live/dead staining method was used to observe the effects of four concentrations of tea polyphenols and theaflavins below the MIC value on the biofilm formation of oral cariogenic bacteria under a laser scanning confocal microscope. With the increase in concentrations of tea polyphenols and theaflavins, the acid production and adhesion of the cariogenic bacteria gradually decreased, and the conductivity gradually increased. However, the conductivity increase was not significant (p < 0.05). Compared with the control group, the 1/2MIC and 1/4MIC tea polyphenols and theaflavins treatments significantly reduced the biomass of the cariogenic biofilm (p < 0.05). The confocal laser scanning microscope showed that the integrated optical density of green fluorescence of the cariogenic biofilm gradually decreased with the increase in agent concentration after the action of tea polyphenols and theaflavins.

Recent Progress in Photocatalytic Degradation of Water Pollution by Bismuth Tungstate.

Photocatalysis has emerged as a highly promising, green, and efficient technology for degrading pollutants in wastewater. Among the various photocatalysts, Bismuth tungstate (Bi2WO6) has gained significant attention in the research community due to its potential in environmental remediation and photocatalytic energy conversion. However, the limited light absorption ability and rapid recombination of photogenerated carriers hinder the further improvement of Bi2WO6's photocatalytic performance. This review aims to present recent advancements in the development of Bi2WO6-based photocatalysts. It delves into the photocatalytic mechanism of Bi2WO6 and summarizes the achieved photocatalytic characteristics by controlling its morphology, employing metal and non-metal doping, constructing semiconductor heterojunctions, and implementing defective engineering. Additionally, this review explores the practical applications of these modified Bi2WO6 photocatalysts in wastewater purification. Furthermore, this review addresses existing challenges and suggests prospects for the development of efficient Bi2WO6 photocatalysts. It is hoped that this comprehensive review will serve as a valuable reference and guide for researchers seeking to advance the field of Bi2WO6 photocatalysis.

Conjugated Electron Donor⁻Acceptor Hybrid Polymeric Carbon Nitride as a Photocatalyst for CO2 Reduction.

This work incorporates a variety of conjugated donor-acceptor (DA) co-monomers such as 2,6-diaminopurine (DP) into the structure of a polymeric carbon nitride (PCN) backbone using a unique nanostructure co-polymerization strategy and examines its photocatalytic activity performance in the field of photocatalytic CO2 reduction to CO and H2 under visible light irradiation. The as-synthesized samples were successfully analyzed using different characterization methods to explain their electronic and optical properties, crystal phase, microstructure, and their morphology that influenced the performance due to the interactions between the PCN and the DPco-monomer. Based on the density functional theory (DFT) calculation result, pure PCN and CNU-DP15.0 trimers (interpreted as incorporation of the co-monomer at two different positions) were extensively evaluated and exhibited remarkable structural optimization without the inclusion of any symmetry constraints (the non-modified sample derived from urea, named as CNU), and their optical and electronic properties were also manipulated to control occupation of their respective highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). Also, co-polymerization of the donor-acceptor 2,6-diamino-purine co-monomer with PCN influenced the chemical affinities, polarities, and acid-base functions of the PCN, remarkably enhancing the photocatalytic activity for the production of CO and H2 from CO2 by 15.02-fold compared than that of the parental CNU, while also improving the selectivity.

A density functional theory study of ethylene hydrogenation on MgO- and γ-Al2O3-supported carbon-containing Ir4 clusters.

Density functional theory was used to investigate the reaction mechanisms of ethylene hydrogenation on MgO(100)- and γ-Al2O3(110)-supported carbon-containing Ir4 clusters. The cluster supported on γ-Al2O3(110) is more active than that on MgO(100), which is consistent with experimental observations. The present calculations show that the binding energies of reactants on the carbon-containing Ir4 cluster are weaker on the γ-Al2O3 supported catalysts compared to the MgO supported Ir cluster. This relatively weak adsorption energy of ethylene on the γ-Al2O3 surface means that ethylene desorption is easier, hence a higher catalytic activity is achieved. To gain further understanding, the energy decomposition method and micro-kinetic analysis are also introduced.

Geometric matching principle for adsorption selectivity of ionic liquids: a simple method into the fascinating world of shape-controlled chemistry.

Ionic liquids (ILs) possess effective functions in controlling the phase and morphology of nanomaterials. However, it is still unclear how ILs affect the morphology control and what the origin of adsorption selectivity of ILs is on different crystal facets. It is a challenge to develop a simple method to select the suitable kinds of ILs for achieving the controllable synthesis of nanomaterials with designable shape. Herein, density functional theory (DFT) calculations were combined with experiment to study the interaction mechanism between ILs and crystal facets. An important relationship is proposed, named as the geometric matching principle, in which the adsorption site of substrate should not only need to meet the space requirement for interionic stacking of ILs, but also needs to maximize the interaction between adsorbed ILs and substrate. This new finding is meaningful for prediction of the adsorption selectivity of ILs and clarification of their shape-controlled chemistry.

TiO2-based photocatalysts from type-II to S-scheme heterojunction and their applications.

Photocatalysis is a promising sustainable technology to remove organic pollution and convert solar energy into chemical energy. Titanium dioxide has drawn extensive attention in this field owing to its high activity under UV light, good chemical stability, large availability, low price and low toxicity. However, the poor quantum efficiency derived from fast electron/hole recombination, the limited utilization of sunlight, and a weak reducing ability still hinder its practical application. Among the modification strategies of TiO2 to enhance its performance, the construction of heterojunctions with other semiconductors is a powerful and versatile way to maximise the separation of photogenerated charge carriers and steer their transport toward enhanced efficiency and selectivity. Here, the research progress and current status of TiO2 modification are reviewed, focusing on heterojunctions. A rapid evolution of the understanding of the different charge transfer mechanisms is witnessed from traditional type II to the recently conceptualised S-scheme. Particular attention is paid to different synthetic approaches and interface engineering methods designed to improve and control the interfacial charge transfer, and several cases of TiO2 heterostructures with metal oxides, metal sulfides and carbon nitride are discussed. The application hotspots of TiO2-based photocatalysts are summarized, including hydrogen generation by water splitting, solar fuel production by CO2 conversion, and the degradation of organic water pollutants. Hints about less studied and emerging processes are also provided. Finally, the main issues and challenges related to the sustainability and scalability of photocatalytic technologies in view of their commercialization are highlighted, outlining future directions of development.

Manipulating heterointerface to boost formation and desorption of intermediates for highly efficient alkaline hydrogen evolution.

Promoting water dissociation and H intermediate desorption play a pivotal role in achieving highly efficient hydrogen evolution reaction (HER) in alkaline media but remain a great challenge. Herein, we rationally develop a unique W-doped NiSx/Ni heterointerface as a favorable HER electrocatalyst which was directly grown on the Cu nanowire foam substrate (W-NiSx/Ni@Cu) by the electrodeposition strategy. Benefiting from the rational design of the interfaces, the electronic coupling of the W-NiSx/Ni@Cu can be efficiently modulated to lower the HER kinetic barrier. The obtained W-NiSx/Ni@Cu exhibits an enhanced HER activity with a low overpotential of 38 mV at 10 mA cm-2 and a small Tafel value of 27.5 mV dec-1, and high stability during HER catalysis. In addition, in-situ Raman spectra reveal that the Ni2+ active sites preferentially adsorb OH intermediate. The theoretical calculation confirms that the water dissociation is accelerated by the construction of W-NiSx/Ni heterointerface and H intermediate desorption can be also promoted by H spillover from S active sites in W-NiSx to Ni active sites in metal Ni. This work offers a valuable reference for rational designing heterointerface of electrocatalysts and provides an available method to accelerate the HER kinetics for the ampere-level current density under low overpotential.

Ultrafast electron transfer at the In2O3/Nb2O5 S-scheme interface for CO2 photoreduction.

Constructing S-scheme heterojunctions proves proficient in achieving the spatial separation of potent photogenerated charge carriers for their participation in photoreactions. Nonetheless, the restricted contact areas between two phases within S-scheme heterostructures lead to inefficient interfacial charge transport, resulting in low photocatalytic efficiency from a kinetic perspective. Here, In2O3/Nb2O5 S-scheme heterojunctions are fabricated through a straightforward one-step electrospinning technique, enabling intimate contact between the two phases and thereby fostering ultrafast interfacial electron transfer (<10 ps), as analyzed via femtosecond transient absorption spectroscopy. As a result, powerful photo-electrons and holes accumulate in the Nb2O5 conduction band and In2O3 valence band, respectively, exhibiting extended long lifetimes and facilitating their involvement in subsequent photoreactions. Combined with the efficient chemisorption and activation of stable CO2 on the Nb2O5, the resulting In2O3/Nb2O5 hybrid nanofibers demonstrate improved photocatalytic performance for CO2 conversion.

Ionothermal synthesis of mesoporous SnO2 nanomaterials and their gas sensitivity depending on the reducing ability of toxic gases.

Mesoporous SnO2 with a high surface area of 292.7 m(2) g(-1) has been successfully synthesized via a low-cost NH4Cl-based ionothermal route. When evaluated as a gas sensor, impressive performances towards N2H4 and HCHO are achieved owing to its excellent chemical reactivity towards oxygen.

Research progress on carbon materials in tumor photothermal therapy.

At present, cancer remains one of the leading causes of human death worldwide, and surgery, radiotherapy and chemotherapy are still the main methods of cancer treatment. However, these treatments have their drawbacks. Surgical treatment often struggles with the complete removal of tumor tissue, leading to a high risk of cancer recurrence. Additionally, chemotherapy drugs have a significant impact on overall health and can easily result in drug resistance. The high risk and mortality of cancer and other reasons promote scientific researchers to unremittingly develop and find a more accurate and faster diagnosis strategy and effective cancer treatment method. Photothermal therapy, which utilizes near-infrared light, offers deeper tissue penetration and minimal damage to surrounding healthy tissues. Compared to conventional radiotherapy and other treatment methods, photothermal therapy boasts several advantages, including high efficiency, non-invasiveness, simplicity, minimal toxicity, and fewer side effects. Photothermal nanomaterials can be categorized as either organic or inorganic materials. This review primarily focuses on the behavior of carbon materials as inorganic materials and their role in tumor photothermal treatment. Furthermore, the challenges faced by carbon materials in photothermal treatment are discussed.

Copper indium sulfide quantum dots in photocatalysis.

Since the advent of photocatalytic technology, scientists have been searching for semiconductor materials with high efficiency in solar energy utilization and conversion to chemical energy. Recently, the development of quantum dot (QD) photocatalysts has attracted much attention because of their unique characteristics: small size, quantum effects, strong surface activity, and wide photoresponse range. Among ternary chalcogenide semiconductors, CuInS2 QDs are increasingly examined in the field of photocatalysis due to their high absorption coefficients, good matching of the absorption range with sunlight spectrum, long lifetimes of photogenerated electron-hole pairs and environmental sustainability. In this review paper, the structural and electronic properties, synthesis methods and various photocatalytic applications of CuInS2 QDs are systematically expounded. The current research status on the photocatalytic properties of materials based on CuInS2 QD is discussed combined with the existing modification approaches for the enhancement of their performances. Future challenges and new development opportunities of CuInS2 QDs in the field of photocatalysis are then prospected.

Photocatalytic Hydrogen Production and Tetracycline Degradation Using ZnIn2S4 Quantum Dots Modified g-C3N4 Composites.

In this work, ZnIn2S4/g-C3N4 (ZIS/CN) composites were synthesized by in-situ growth method, which showed excellent photocatalytic activity in the degradation of tetracycline and hydrogen production from water under visible light irradiation. ZnIn2S4 quantum dots (ZIS QDs) tightly combined with sheet g-C3N4 (CN) to accelerate the separation and transportation of photogenerated charges for enhanced photocatalytic activity. Among the prepared nanocomposites, 20%ZnIn2S4 QDs/g-C3N4 (20%ZIS/CN) delivered the highest photocatalytic activity. After 120 min of irradiation, the degradation rate of tetracycline with 20%ZIS/CN was 54.82%, 3.1 times that of CN while the rate of hydrogen production was 75.2 µmol·g-1·h-1. According to the optical and electrochemical characterization analysis, it was concluded that the excellent photocatalytic activities of the composite materials were mainly due to the following three points: enhancement in light absorption capacity, acceleration in the charge transport, and reduction in the carrier recombination rate through the formation of S-scheme heterojunction in the composite system. The high photocatalytic activity of ZIS/CN composites provides a new idea to develop highly efficient photocatalysts.

Detection of enrofloxacin residues in dairy products based on their fluorescence quenching effect on AgInS2 QDs.

Water-soluble AgInS2 (AIS) quantum dots (QDs) were successfully prepared through the one-pot water phase method with thioglycolic acid (TGA) as the stabilizing agent. Because enrofloxacin (ENR) effectively quenches the fluorescence of AIS QDs, a highly-sensitive fluorescence detection method is proposed to detect ENR residues in milk. Under optimal detection conditions, there was a good linear relationship between the relative fluorescence quenching amount (ΔF/F0) of AgInS2 with ENR and ENR concentration (C). The detection range was 0.3125-20.00 µg/mL, r = 0.9964, and the detection limit (LOD) was 0.024 µg/mL (n = 11). The average recovery of ENR in milk ranged from 95.43 to 114.28%. The method established in this study has advantages including a high sensitivity, a low detection limit, simple operation and a low cost. The fluorescence quenching mechanism of AIS QDs with ENR was discussed and the dynamic quenching mechanism of light-induced electron transfer was proposed.

Sonocatalytic degradation of tetracycline hydrochloride with CoFe2O4/g-C3N4 composite.

In this work, different mass percent ratios of CoFe2O4 coupled g-C3N4 (w%-CoFe2O4/g-C3N4, CFO/CN) nanocomposites were integrated through a hydrothermal process for the sonocatalytic eradication of tetracycline hydrochloride (TCH) from aqueous media. The prepared sonocatalysts were subjected to various techniques to investigate their morphology, crystallinity, ultrasound wave capturing activity and charge conductivity. From the investigated activity of the composite materials, it has been registered that the best sonocatalytic degradation efficiency of 26.71 % in 10 min was delivered when the amount of CoFe2O4 was 25% in the nanocomposite. The delivered efficiency was higher than that of bare CoFe2O4 and g-C3N4. This enriched sonocatalytic efficiency was credited to the accelerated charge transfer and separation of e--h+ pair through the S-scheme heterojunctional interface. The trapping experiments confirmed that all the three species i.e. •OH, h+ and •O2- were involved in the eradication of antibiotics. A strong interaction was shown up between CoFe2O4 and g-C3N4 in the FTIR study to support charge transfer as confirmed from the photoluminescence and photocurrent analysis of the samples. This work will provide an easy approach for fabricating highly efficient low-cost magnetic sonocatalysts for the eradication of hazardous materials present in our environment.

Highly Efficient Capture of Heavy Metal Ions on Amine-Functionalized Porous Polymer Gels.

Porous polymer gels (PPGs) are characterized by inherent porosity, a predictable structure, and tunable functionality, which makes them promising for the heavy metal ion trap in environmental remediation. However, their real-world application is obstructed by the balance between performance and economy in material preparation. Development of an efficient and cost-effective approach to produce PPGs with task-specific functionality remains a significant challenge. Here, a two-step strategy to fabricate amine-enriched PPGs, NUT-21-TETA (NUT means Nanjing Tech University, TETA indicates triethylenetetramine), is reported for the first time. The NUT-21-TETA was synthesized through a simple nucleophilic substitution using two readily available and low-cost monomers, mesitylene and α, α'-dichloro-p-xylene, followed by the successful post-synthetic amine functionalization. The obtained NUT-21-TETA demonstrates an extremely high Pb2+ capacity from aqueous solution. The maximum Pb2+ capacity, qm, assessed by the Langmuir model was as high as 1211 mg/g, which is much higher than most benchmark adsorbents including ZIF-8 (1120 mg/g), FGO (842 mg/g), 732-CR resin (397 mg/g), Zeolite 13X (541 mg/g), and AC (58 mg/g). The NUT-21-TETA can be regenerated easily and recycled five times without a noticeable decrease of adsorption capacity. The excellent Pb2+ uptake and perfect reusability, in combination with a low synthesis cost, gives the NUT-21-TETA a strong potential for heavy metal ion removal.

Multi-target mechanism of Naoshuantong capsule for treatment of Ischemic stroke based on network pharmacology and molecular docking.

BACKGROUND: Naoshuantong capsule (NST capsule) is a classic Chinese patent medicine, which can treat ischemic stroke (IS) and has good clinical efficacy. However, its pharmacological mechanism remains to be further explored in the treatment of IS. METHODS: The bio-active components and potential targets of NST Capsules were obtained by ETCM and TCMSP databases. In addition, the related targets of IS were collected by Genecard, OMIM, DrugBank, TTD and DisGeNET databases. NST-IS common target was obtained by Venn platform. PPI network of NST-IS common target and the composition - target network diagram of NST Capsule were constructed by Cytoscape3.8.1. Finally, AutoDock was used for molecular docking. RESULTS: 265 targets were predicted from 32 active compounds in NST Capsule, 109 common targets were identified between NST Capsule and IS. The top 10 key targets of PPI network were ALB, TNF, TP53, VEGFA, CASP3, MYC, etc. Enrichment analysis showed that NST capsules treated IS mainly through lipid and atherosclerosis, fluid shear stress and atherosclerosis signaling pathways. CONCLUSION: Through the methods of network pharmacology and molecular docking, this study clarified that NST capsules play a role in the treatment of IS, which is multi-target, multi-channel and multi-component regulation. This study further explored the pharmacological mechanism of NST capsule in the treatment of IS, which can provide some references for the subsequent research in the pharmacological mechanism of NST capsule.

Facile fabrication of Eu-based metal-organic frameworks for highly efficient capture of tetracycline hydrochloride from aqueous solutions.

The tetracycline hydrochloride (TCH) removal from wastewater is important for the environment and human health yet challenging. Herein, the Eu-based MOF, Eu(BTC) (BTC represents 1,3,5-trimesic acid) was prepared by an efficient and environmental-friendly strategy, and then was used for the TCH capture for the first time. The Eu(BTC) was characterized by different methods such as X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy. The TCH uptake of Eu(BTC) was investigated systematically. The influences of experiment conditions such as solution pH value, adsorption time and initial concentration on TCH capacity of Eu(BTC) were also studied. The Eu(BTC) obtained exhibited remarkable TCH uptake (qm was up to 397.65 mg/g), which was much higher than those of most materials such as UiO-66/PDA/BC (184.30 mg/g), PDA-NFsM (161.30 mg/g) and many carbon-based materials reported till now. Besides, the TCH adsorption behavior on Eu(BTC) was explored by Freundlich and Langmuir equations, and the adsorption mechanism was further analyzed. The experimental results suggested that the TCH adsorption mechanism of Eu(BTC) included the π-π interaction, electrostatic interaction and coordinate bonds. The excellent TCH adsorption performance and the efficient fabrication strategy make the Eu(BTC) prepared promising in TCH removal.