Proton Shuttling by Polyaniline of High Brønsted Basicity for Improved Electrocatalytic Ethylene Production from CO2.

Hybrid organic/inorganic composites with the organic phase tailored to modulate local chemical environment at the Cu surface arise as an enchanting category of catalysts for electrocatalytic CO2 reduction reaction (CO2 RR). A fundamental understanding on how the organics of different functionality, polarity, and hydrophobicity affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polypyrrole (PPy) and polyaniline (PANI) manifesting different Brønsted basicity are compared for their regulatory roles on the CO2 RR pathways regarding *CO coverage, proton source and interfacial polarity. Concerted efforts from in situ IR, Raman and operando modelling unveil that at the PPy/Cu interface with limited *CO coverage, hydridic *H produced by the Volmer step favors the carbon hydrogenation of *CO to form *CHO through a Tafel process; Whereas at the PANI/Cu interface with concentrated CO2 and high *CO coverage, protonic H+ shuttled through the benzenoid -NH- protonates the oxygen of *CO, yielding *COH for asymmetric coupling with nearby *CO to form *OCCOH under favored energetics. As a result of the tailored chemical environment, the restructured PANI/Cu composite demonstrates a high partial current density of 0.41 A cm-2 at a maximal Faraday efficiency of 67.5 % for ethylene production, ranking among states of the art.

Combining Multivariate Electrospinning with Surface MOF Functionalization to Construct Tunable Active Sites toward Trifunctional Electrocatalysis.

The development of high-performance multifunctional electrocatalysts operating in the same electrolyte is key to reduce the material and process costs of renewable energy conversion and storage devices. Herein, the fabrication of freestanding integral electrodes by combining multivariate electrospinning with surface metal organic framework functionalization to arrest pyrolytic emissions from fiber interior is reported, resulting in the expression of rich active sites with controlled composition, for example, the tunable Co-P coordination. The as-fabricated electrode of CoP@CF-900, when used as both the cathode and anode for overall water splitting, is able to deliver 200 mA cm-2 at a cell voltage of 1.89 V, significantly outshining the Pt/C‖RuO2 couple; when used as the air cathode for a zinc-air battery, is able to operate more than 150 h at 10 mA cm-2 with a nearly constant round-trip energy efficiency of ≈60%, also outperforming the Pt/C+RuO2 benchmark. The activity and kinetics origin of the superb multi-functionality is further elucidated through extensive electroanalytical, post-mortem, and operando characterizations, which underscore the construction of robust integral electrodes through synergistic structure and composition engineering.

A "Blockchain" Synergy in Conductive Polymer-Filled Metal-Organic Frameworks for Dendrite-Free Li Plating/Stripping with High Coulombic Efficiency.

The performance of lithium-metal batteries is severely hampered by uncontrollable dendrite growth and volume expansion on the metal anodes. Inspired by the "blockchain" concept in data mining, here we utilize a conductive polymer-filled metal-organic framework (MOF) as the lithium host, in which polypyrrole (PPy) serves as the "chain" to interlink Li "blocks" stored in the MOF pores. While the N-rich PPy guides fast Li+ infiltration/extrusion and serves as the nucleation sites for isotropic Li growth, the MOF pores compartmentalize bulk Li deposition for 3D matrix Li storage, leading to low-barrier and dendrite-free Li plating/stripping with superb Coulombic efficiency. The as-fabricated lithium-metal anodes operate over 700 cycles at 5 mA cm-2 in symmetric cells, and 800 cycles at 1 C in full cells with a per-cycle capacity loss of only 0.017 %. This work might open a new chapter for Li-metal anode construction by introducing the concept of "blockchain" management of Li plating/stripping.

Spatially Confined Silver Nanoparticles in Mercapto Metal-Organic Frameworks to Compartmentalize Li Deposition Toward Anode-Free Lithium Metal Batteries.

As the promising next-generation energy storage solution, lithium metal battery (LMB) has gained great attention but still suffers from troubles associated with the highly active metallic lithium. Herein, it is aimed to develop an anode-free LMB engaging no Li disk or foil by modifying the Cu current collector with mercapto metal-organic frameworks (MOFs) impregnating Ag nanoparticles (NPs). While the polar mercapto groups facilitate and guide Li+ transport, the highly lithiophilic Ag NPs help to enhance the electric conductivity and lower the energy barrier of Li nucleation. Furthermore, the MOF pores allow compartmentalizing bulk Li into a 3D matrix Li storage so that not only the local current density is reduced, but also is the plating/stripping reversibility greatly enhanced. As a result, full cells pairing the prelithiated Ag@Zr-DMBD/Cu anodes with LiFePO4 cathodes demonstrate a high initial specific capacity of 159.8 mAh g-1 , first-cycle Coulombic efficiency of 96.6%, and long-term cycling stability over 1000 cycles with 99.3% capacity retention at 1 C. This study underlines the multi-aspect functionalization of MOFs to impart lithiophilicity, polarity, and porosity to achieve reversible Li plating/stripping and paves the way for realizing high-performance anode-free LMBs through exquisite modification of the Cu current collector.

A "Trinity" Design of Li-O2 Battery Engaging the Slow-Release Capsule of Redox Mediators.

Nonaqueous Li-O2 battery (LOB) represents one of the promising next-gen energy storage solutions owing to its ultrahigh energy density but suffers from problems such as high charging overpotential, slow redox kinetics, Li anode corrosion, etc., calling for a systemic optimization of the battery configuration and structural components. Herein, an ingenious "trinity" design of LOB is initiated by implementing a hollowed cobalt metal organic framework (MOF) impregnating iodized polypyrrole simultaneously as the cathode catalyst, anode protection layer, and slow-release capsule of redox mediators, so as to systemically address issues of impeded mass transport and redox kinetics on the cathode, dendrite growth, and surface corrosion on the anode, as well as limited intermediate solubility in the low donor-number (DN) solvent. As a result of the systemic effort, the LOB constructed demonstrates an ultralow discharge/charge polarization of 0.2 V, prolonged cycle life of 1244 h and total discharge capacity of 28.41 mAh cm-2 . Mechanistic investigations attribute the superb LOB performance to the redox-mediated solution growth mechanism of crystalline Li2 O2 with both enhanced reaction kinetics and reversibility. This study offers a paradigm in designing smart materials to raise the performance bar of Li-O2 battery toward realistic applications.

Stepping Up the Kinetics of Li-O2 Batteries by Shrinking Down the Li2O2 Granules through Concertedly Enhanced Catalytic Activity and Photoactivity of Se-Doped LaCoO3.

Owing to their structural tunability for furnishing high catalytic activity and photoactivity, perovskite oxides are a class of promising materials for high-performance photocathode catalysts in a photoassisted lithium oxygen battery (LOB), which is still in its infancy. Herein, single-crystalline LaCoO3 (LCO) is successfully synthesized through a microwave-assisted approach and selenylated to simultaneously introduce anionic doping and oxygen vacancies, boosting not only the electrocatalytic activity toward reversible Li2O2 formation/decomposition, but also the photoactivity to further reduce the charge/discharge polarization. As a result, LOBs utilizing Se-doped LCO as the photocathode catalyst demonstrate a superior performance under illumination in all aspects of energy efficiency, specific capacity, and cycling stability, ranking among the best reported in the literature for perovskite oxides. The photoenhanced charge kinetics is found to be correlated with the accelerated Li2O2 nucleation with lowered granule size, which is key to both the improved charge/discharge capacity and reversibility. The results underscore the tailoring of perovskite structure to aggrandize both the catalytic activity and photoactivity for concertedly promoting the kinetics of LOBs.

Electrocatalytic CO2 reduction to alcohols by modulating the molecular geometry and Cu coordination in bicentric copper complexes.

Electrocatalytic reduction of CO2 into alcohols of high economic value offers a promising route to realize resourceful CO2 utilization. In this study, we choose three model bicentric copper complexes based on the expanded and fluorinated porphyrin structure, but different spatial and coordination geometry, to unravel their structure-property-performance correlation in catalyzing electrochemical CO2 reduction reactions. We show that the complexes with higher intramolecular tension and coordination asymmetry manifests a lower electrochemical stability and thus more active Cu centers, which can be reduced during electrolysis to form Cu clusters accompanied by partially-reduced or fragmented ligands. We demonstrate the hybrid structure of Cu cluster and partially reduced O-containing hexaphyrin ligand is highly potent in converting CO2 into alcohols, up to 32.5% ethanol and 18.3% n-propanol in Faradaic efficiencies that have been rarely reported. More importantly, we uncover an interplay between the inorganic and organic phases to synergistically produce alcohols, of which the intermediates are stabilized by a confined space to afford extra O-Cu bonding. This study underlines the exploitation of structure-dependent electrochemical property to steer the CO2 reduction pathway, as well as a potential generic tactic to target alcohol synthesis by constructing organic/inorganic Cu hybrids.