Time-Dependent and Excitation-Dependent Afterglow Color Evolution from the Assembly of Dual Carbon Dots in Zeolite.

Afterglow materials with time-dependent color output emerge as huge prospects in advanced optical information encryption but remain a formidable challenge due to the limited exciton transfer from a single emission center. Here, multiple time-dependent afterglow color evolutions are achieved by the strategy of controllable assembly of dual carbon dots (CDs) with an individual afterglow color and decay rate into an RHO zeolite. The strategy possesses high controllability such that B-CDs and G-CDs can be independently generated and in situ embedded into a matrix; in particular, the doped amount of two kinds of CDs can be adjusted conveniently to produce interesting variable afterglow colors. Triggered by different excitations, the prepared B&G-CDs@RHO composites exhibit the conversion of TADF and RTP behaviors, as well as time-dependent afterglow color output from deep-blue to green (365 nm excitation) and static cyan (254 nm excitation). The unique luminescence and excellent stability allow the composite applied in information encryption with high-security levels.

Direct in Situ Fabrication of Multicolor Afterglow Carbon Dot Patterns with Transparent and Traceless Features via Laser Direct Writing.

Multicolor afterglow patterns with transparent and traceless features are important for the exploration of new functionalities and applications. Herein, we report a direct in situ patterning technique for fabricating afterglow carbon dots (CDs) based on laser direct writing (LDW) for the first time. We explore a facile step-scanning method that reduces the heat-affected zone and avoids uneven heating, thus producing a fine-resolution afterglow CD pattern with a minimum line width of 80 µm. Unlike previous LDW-induced luminescence patterns, the patterned CD films are traceless and transparent, which is mainly attributed to a uniform heat distribution and gentle temperature rise process. Interestingly, by regulating the laser parameters and CD precursors, an increased carbonization and oxidation degree of CDs could be obtained, thus enabling time-dependent, tunable afterglow colors from blue to red. In addition, we demonstrate their potential applications in the in situ fabrication of flexible and stretchable optoelectronics.

Enhanced Light-Harvesting and Energy Transfer in Carbon Dots Embedded Thylakoids for Photonic Hybrid Capacitor Applications.

Nanohybrid photosystems have advantages in converting solar energy into electricity, while natural photosystems based solar-powered energy-storage device is still under developed. Here, we fabricate a new kind of photo-rechargeable zinc-ion hybrid capacitor (ZHC) benefiting from light-harvesting carbon dots (CDs) and natural thylakoids for realizing solar energy harvesting and storage simultaneously. Under solar light irradiation, the embedded CDs in thylakoids (CDs/Thy) can convert the less absorbed green light into highly absorbed red light for thylakoids, besides, Förster resonance energy transfer (FRET) between CDs and Thy also occurs, which facilitates the photoelectrons generation during thylakoids photosynthesis, thereby resulting in 6-fold photocurrent output in CDs/Thy hybrid photosystem, compared to pristine thylakoids. Using CDs/Thy as the photocathode in ZHCs, the photonic hybrid capacitor shows photoelectric conversion and storage features. CDs can improve the photo-charging voltage response of ZHCs to ≈1.2 V with a remarkable capacitance enhancement of 144 % under solar light. This study provides a promising strategy for designing plant-based photonic and electric device for solar energy harvesting and storage.

Assignment of Core and Surface States in Multicolor-Emissive Carbon Dots.

It is important to reveal the luminescence mechanisms of carbon dots (CDs). Herein, CDs with two types of optical centers are synthesized from citric acid in formamide by a solvothermal method, and show high photoluminescence quantum yield reaching 42%. Their green/yellow emission exhibits pronounced vibrational structure and high resistance toward photobleaching, while broad red photoluminescence is sensitive to solvents, temperature, and UV-IR. Under UV-IR, the red emission is gradually bleached due to the photoinduced dehydration of the deprotonated surface of CDs in dimethyl sulfoxide, while this process is hindered in water. From the analysis of steady-state and time-resolved photoluminescence and transient absorption data together with density functional theory calculations, the green/ yellow emission is assigned to conjugated sp2 -domains (core state) similar to organic dye derivatives stacked within disk-shaped CDs; and the broad red emission-to oxygen-containing groups bound to sp2 -domains (surface state), whereas energy transfer from the core to the surface state can happen.

L-Arginine-Functionalized Carbon Dots with Enhanced Red Emission and Upregulated Intracellular L-Arginine Intake for Obesity Inhibition.

Obesity is a major global health problem that significantly increases the risk of many other diseases. Herein, a facile method of suppressing lipogenesis and obesity using L-arginine-functionalized carbon dots (L-Arg@CDots) is reported. The prepared CDots with a negative surface charge form stronger bonds than D-arginine and lysine with L-Arg in water. The L-Arg@CDots in the aqueous solution offer a high photoluminescence quantum yield of 23.6% in the red wavelength region. The proposed L-Arg functionalization strategy not only protects the red emission of the CDots from quenching by water molecules but also enhances the intracellular uptake of L-Arg to reduce lipogenesis. Injection of L-Arg@CDots can reduce the body weight increase in ob/ob mice by suppressing their food intake and shrinking the white adipose tissue cells, thereby significantly inhibiting obesity.

Triphenylamine-Derived Solid-State Emissive Carbon Dots for Multicolor High-Efficiency Electroluminescent Light-Emitting Diodes.

Two kinds of triphenylamine-derived solid-state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π-π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high-performance orange-color and green-color electroluminescent light-emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m-2 , high current efficiency of 1.57/2.34 cd A-1 and low turn-on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white-color LED device is further prepared. This work provides a universal platform for the construction of novel solid-state emissive CDs with significant applications in photoelectric device.

Enhancing the Electron Transport, Quantum Yield, and Catalytic Performance of Carbonized Polymer Dots via MnO Bridges.

Carbonized polymer dots (CPDs) have received tremendous attention during the last decade due to their excellent fluorescent properties and catalytic performance. Doping CPDs with transition metal atoms accelerates the local electron flow in CPDs and improves the fluorescent properties and catalytic performance of the CPDs. However, the binding sites and the formation mechanisms of the transition-metal-atom-doped CPDs remain inconclusive. In this work, Mn2+ -ion-doped CPDs (Mn-CPDs) are synthesized by the hydrothermal method. The Mn2+ ions form MnO bonds that bridge the sp2 domains of carbon cores and increases the effective sp2 domains in the Mn-CPDs, which redshifts the fluorescence emission peak of the Mn-CPDs slightly. The Mn2+ ions form covalent bonds in the CPDs and remedy the oxygen vacancies of the CPDs, which cuts off the non-radiative-recombination process of the Mn-CPDs and increases the quantum yield of the Mn-CPDs to 70%. Furthermore, the MnO bonds accelerate the electron flow between adjacent sp2 domains and enhances the electron transport in the Mn-CPDs. Thus, the Mn-CPDs demonstrate excellent catalytic performance to activate hydrogen peroxide (H2 O2 ) and produce hydroxyl radicals (•OH) to degrade methylene blue (MB) and rhodamine B (RhB).

Optical Properties of Carbon Dots in the Deep-Red to Near-Infrared Region Are Attractive for Biomedical Applications.

Carbon dots (CDs) represent a recently emerged class of luminescent materials with a great potential for biomedical theranostics, and there are a lot of efforts to shift their absorption and emission toward deep-red (DR) to near-infrared (NIR) region falling in the biological transparency window. This review offers comprehensive insights into the synthesis strategies aimed to achieve this goal, and the current approaches of modulating the optical properties of CDs over the DR to NIR region. The underlying mechanisms of their absorption, photoluminescence, and chemiluminescence, as well as the related photophysical processes of photothermal conversion and formation of reactive oxygen species are considered. The already available biomedical applications of CDs, such as in the photoacoustic imaging and photothermal therapy, photodynamic therapy, and their use as bioimaging agents and drug carriers are then shortly summarized.

Enhanced Fluorescence for Bioassembly by Environment-Switching Doping of Metal Ions.

The self-assembly of cyclodipeptides composed of natural aromatic amino acids into supramolecular structures of diverse morphologies with intrinsic emissions in the visible light region is demonstrated. The assembly process can be halted at the initial oligomerization by coordination with zinc ions, with the most prominent effect observed for cyclo-dihistidine (cyclo-HH). This process is mediated by attracting and pulling of the metal ions from the solvent into the peptide environment, rather than by direct interaction in the solvent as commonly accepted, thus forming an "environment-switching" doping mechanism. The doping induces a change of cyclo-HH molecular configurations and leads to the formation of pseudo "core/shell" clusters, comprising peptides and zinc ions organized in ordered conformations partially surrounded by relatively amorphous layers, thus significantly enhancing the emissions and allowing the application of the assemblies for ecofriendly color-converted light emitting diodes. These findings shed light into the very initial coordination procedure and elucidate an alternative mechanism of metal ions doping on biomolecules, thus presenting a promising avenue for integration of the bioorganic world and the optoelectronic field.

Thermally Activated Upconversion Near-Infrared Photoluminescence from Carbon Dots Synthesized via Microwave Assisted Exfoliation.

Upconversion near-infrared (NIR) fluorescent carbon dots (CDs) are important for imaging applications. Herein, thermally activated upconversion photoluminescence (UCPL) in the NIR region, with an emission peak at 784 nm, which appears under 808 nm continuous-wave laser excitation, are realized in the NIR absorbing/emissive CDs (NIR-CDs). The NIR-CDs are synthesized by microwave-assisted exfoliation of red emissive CDs in dimethylformamide, and feature single or few-layered graphene-like cores. This structure provides an enhanced contact area of the graphene-like plates in the core with the electron-acceptor carbonyl groups in dimethylformamide, which contributes to the main NIR absorption band peaked at 724 nm and a tail band in 800-850 nm. Temperature-dependent photoluminescence spectra and transient absorption spectra confirm that the UCPL of NIR-CDs is due to the thermally activated electron transitions in the excited state, rather than the multiphoton absorption process. Temperature dependent upconversion NIR luminescence imaging is demonstrated for NIR-CDs embedded in a polyvinyl pyrrolidone film, and the NIR upconversion luminescence imaging in vivo using NIR-CDs in a mouse model is accomplished.

Doping Lanthanide into Perovskite Nanocrystals: Highly Improved and Expanded Optical Properties.

Cesium lead halide (CsPbX3) perovskite nanocrystals (NCs) have demonstrated extremely excellent optical properties and great application potentials in various optoelectronic devices. However, because of the anion exchange, it is difficult to achieve white-light and multicolor emission for practical applications. Herein, we present the successful doping of various lanthanide ions (Ce3+, Sm3+, Eu3+, Tb3+, Dy3+, Er3+, and Yb3+) into the lattices of CsPbCl3 perovskite NCs through a modified hot-injection method. For the lanthanide ions doped perovskite NCs, high photoluminescence quantum yield (QY) and stable and widely tunable multicolor emissions spanning from visible to near-infrared (NIR) regions are successfully obtained. This work indicates that the doped perovskite NCs will inherit most of the unique optical properties of lanthanide ions and deliver them to the perovskite NC host, thus endowing the family of perovskite materials with excellent optical, electric, or magnetic properties.

Electrostatic Assembly Guided Synthesis of Highly Luminescent Carbon-Nanodots@BaSO4 Hybrid Phosphors with Improved Stability.

Carbon nanodots (CNDs)@BaSO4 hybrid phosphors are fabricated in an easy and low-cost process by sequentially assembling Ba2+ and SO42- ions onto the surface of carbon nanodots through electrostatic attraction. CNDs act as the nucleus to attract these reactive ions and provide the luminescent centers in the hybrid phosphors. This strategy is versatile for a variety of negatively charged CNDs with different emission colors. The advantage of the resultant hybrid phosphors is that their luminescence exhibits excellent thermal and photostability, as well as remarkable resistance to strong acid/alkali and common organic solvents. These merits allow for the fabrication of CNDs-based light-emitting diodes using the CNDs@BaSO4 hybrid phosphors as a color conversion layer.

Towards the design of efficient quantum dot light-emitting diodes by controlling the exciton lifetime.

Time-resolved photoluminescence and electroluminescence measurements were used to explore the emission characteristics of excitons in quantum dot light-emitting diodes (QD-LEDs). It is found that the lifetime of excitons in the QDs can be varied by adjusting the distance between the excitons and metal Al mirror, which is due to the effect of local density of optical states (LDOS) on the exciton decay rate. QD-LEDs with different hole transport layer (HTL) thickness, i.e., different distance between QDs and Al reflective anode, have been fabricated and it is found that the HTL thickness affects the device efficiency performance greatly, and the optimal HTL thickness for the red QD-LED (emission peak is at 621 nm) is 80 nm. These results shed light on the factors affecting the efficiency and efficiency roll-off in QD-LEDs, thus may provide a clue for high performance QD-LEDs.

Towards efficient photoinduced charge separation in carbon nanodots and TiO2 composites in the visible region.

In this work, photoinduced charge separation behaviors in non-long-chain-molecule-functionalized carbon nanodots (CDs) with visible intrinsic absorption (CDs-V) and TiO2 composites were investigated. Efficient photoinduced electron injection from CDs-V to TiO2 with a rate of 8.8 × 10(8) s(-1) and efficiency of 91% was achieved in the CDs-V/TiO2 composites. The CDs-V/TiO2 composites exhibited excellent photocatalytic activity under visible light irradiation, superior to pure TiO2 and the CDs with the main absorption band in the ultraviolet region and TiO2 composites, which indicated that visible photoinduced electrons and holes in such CDs-V/TiO2 composites could be effectively separated. The incident photon-to-current conversion efficiency (IPCE) results for the CD-sensitized TiO2 solar cells also agreed with efficient photoinduced charge separation between CDs-V and the TiO2 electrode in the visible range. These results demonstrate that non-long-chain-molecule-functionlized CDs with a visible intrinsic absorption band could be appropriate candidates for photosensitizers and offer a new possibility for the development of a well performing CD-based photovoltaic system.

Polylysine-modified near-infrared-emitting carbon dots assemblies: Amplification of tumor accumulation for enhanced tumor photothermal therapy.

A key challenge to enhance the therapeutic outcome of photothermal therapy (PTT) is to improve the efficiency of passive targeted accumulation of photothermal agents at tumor sites. Carbon dots (CDs) are an ideal choice for application as photothermal agents because of their advantages such as adjustable fluorescence, high photothermal conversion efficiency, and excellent biocompatibility. Here, we synthesized polylysine-modified near-infrared (NIR)-emitting CDs assemblies (plys-CDs) through post-solvothermal reaction of NIR-emitting CDs with polylysine. The encapsulated structure of plys-CDs was confirmed by determining morphological, chemical, and luminescent properties. The particle size of CDs increased to approximately 40 ± 8 nm after polylysine modification and was within the size range appropriate for achieving superior enhanced permeability and retention effect. Plys-CDs maintained a high photothermal conversion efficiency of 54.9 %, coupled with increased tumor site accumulation, leading to a high efficacy in tumor PTT. Thus, plys-CDs have a great potential for application in photothermal ablation therapy of tumors.

Carbon Dots-Inked Paper with Single/Two-Photon Excited Dual-Mode Thermochromic Afterglow for Advanced Dynamic Information Encryption.

Achieving thermochromic afterglow (TCAG) in a single material for advanced information encryption remains a significant challenge. Herein, TCAG in carbon dots (CDs)-inked paper (CDs@Paper) is achieved by tuning the temperature-dependent dual-mode afterglow of room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF). The CDs are synthesized through thermal treatment of levofloxacin in melting boric acid with postpurification via dialysis. CDs@Paper exhibit both TCAG and excitation-dependent afterglow color properties. The TCAG of CDs@Paper exhibits dynamic color changes from blue at high temperatures to yellow at low temperatures by adjusting the proportion of the temperature-dependent TADF and phosphorescence. Notably, two-photon afterglow in CDs-based afterglow materials and time-dependent two-photon afterglow colors are achieved for the first time. Moreover, leveraging the opposite emission responses of phosphorescence and TADF to temperature, CDs@Paper demonstrate TCAG with temperature-sensing capabilities across a wide temperature range. Furthermore, a CDs@Paper-based 3D code containing color and temperature information is successfully developed for advanced dynamic information encryption.

Visible-light-induced strong oxidation capacity of metal-free carbon nanodots through photo-induced surface reduction for photocatalytic antibacterial and tumor therapy.

Biocompatible metal-free carbon dots (CDs) with good photo-induced strong oxidation capacity in aqueous solutions are scarce for high-performance photocatalytic antibacterial and tumor therapy. In this work, we achieved effective visible light-induced cell death and antibacterial performance based on biocompatible metal-free CDs. The visible-light-induced reducing ability of the surface electron-withdrawing structure of the CDs allowed for the remaining photo-induced holes with high oxidation capacity to oxidize water molecules and generate hydroxyl radicals. Antibiotic-resistant bacteria were effectively inhibited by the CDs under xenon lamp irradiation with 450 nm long pass filter. Moreover, CD-based tumor photocatalytic therapy in mice was achieved using a xenon lamp with 450 nm long pass filter (0.3 W cm-2).

Red-Emissive Center Formation within Carbon Dots Based on Citric Acid and Formamide.

The formation of red-emissive optical centers in carbon dots based on citric acid and formamide was investigated by varying the synthesis parameters with focus on finding optimal─necessary and sufficient─amount of precursors to decrease byproduct amount and to increase the chemical yield of red-emissive carbon dots. The emission is observed at 640 nm excited at 590 nm and quantum yield reaches up 19%. A high chemical yield of carbon dots of 26% was achieved at an optimal molar ratio of citric acid to formamide of 1:4.

Constructing Oxygen-Related Defects in Carbon Nanodots with Janus Optical Properties: Noninvasive NIR Fluorescent Imaging and Effective Photocatalytic Therapy.

Noninvasive fluorescence (FL) imaging and high-performance photocatalytic therapy (PCT) are opposing optical properties that are difficult to combine in a single material system. Herein, a facile approach to introducing oxygen-related defects in carbon dots (CDs) via post-oxidation with 2-iodoxybenzoic acid is reported, in which some nitrogen atoms are substituted by oxygen atoms. Unpaired electrons in these oxygen-related defects rearrange the electronic structure of the oxidized CDs (ox-CDs), resulting in an emerging near-infrared (NIR) absorption band. These defects not only contribute to enhanced NIR bandgap emission but also act as trappers for photoexcited electrons to promote efficient charge separation on the surface, leading to abundant photo-generated holes on the ox-CDs surface under visible-light irradiation. Under white LED torch irradiation, the photo-generated holes oxidize hydroxide to hydroxyl radicals in the acidification of the aqueous solution. In contrast, no hydroxyl radicals are detected in the ox-CDs aqueous solution under 730 nm laser irradiation, indicating noninvasive NIR FL imaging potential. Utilizing the Janus optical properties of the ox-CDs, the in vivo NIR FL imaging of sentinel lymph nodes around tumors and efficient photothermal enhanced tumor PCT are demonstrated.

Durable modulation of Zn(002) plane deposition via reproducible zincophilic carbon quantum dots towards low N/P ratio zinc-ion batteries.

Aqueous zinc-ion batteries (ZIBs) are promising candidates for next-generation energy storage systems due to their intrinsic safety, environmental friendliness, and low cost. However, the uncontrollable Zn dendrite growth during cycling is still a critical challenge for the long-term operation of ZIBs, especially under harsh lean-Zn conditions. Herein, we report nitrogen and sulfur-codoped carbon quantum dots (N,S-CDs) as zincophilic electrolyte additives to regulate the Zn deposition behaviors. The N,S-CDs with abundant electronegative groups can attract Zn2+ ions and co-deposit with Zn2+ ions on the anode surface, inducing a parallel orientation of the (002) crystal plane. The deposition of Zn preferentially along the (002) crystal direction fundamentally avoids the formation of Zn dendrites. Moreover, the co-depositing/stripping feature of N,S-CDs under an electric field force ensures the reproducible and long-lasting modulation of the Zn anode stability. Benefiting from these two unique modulation mechanisms, stable cyclability of the thin Zn anodes (10 and 20 µm) at a high depth of discharge (DOD) of 67% and high Zn||Na2V6O16·3H2O (NVO, 11.52 mg cm-2) full-cell energy density (144.98 W h Kg-1) at a record-low negative/positive (N/P) capacity ratio of 1.05 are achieved using the N,S-CDs as an additive in ZnSO4 electrolyte. Our findings not only offer a feasible solution for developing actual high-energy density ZIBs but also provide in-depth insights into the working mechanism of CDs in regulating Zn deposition behaviors.