Rehabilitation of maxillary cleft with hybrid obturator prosthesis.

The hybrid obturator prosthesis aims to provide a sense of well-being to the patient, offering improvements in speech, chewing, and swallowing. Thus, the retention and stabilization of the prosthesis become decisive factors for the success of the rehabilitation treatment. The objective of this study was to describe the treatment of a 70-year-old man with a congenital maxillary cleft performed through aesthetic and functional prosthetic rehabilitation with hybrid obturator prosthesis. In this study, the fabricated prosthesis achieved its purpose by providing adequate functional and aesthetic conditions to the patient, promoting the reduction of airspace through the sealing of the oronasal communication, with consequent improvement in the quality of life.

Effect of sodium ascorbate on tag formation in bleached enamel.

PURPOSE: This study analyzed the influence of 10% sodium ascorbate (SA) on tag formation in bleached enamel. MATERIALS AND METHODS: Five groups were tested: G1 - control; G2 - bleaching with 10% carbamide peroxide (CP) + restoration; G3 - CP + SA + restoration; G4 - bleaching with 35% hydrogen peroxide (HP) + restoration; and G5 - HP + SA + restoration. The teeth were sectioned and decalcified, and the resin tags were analyzed at 400X magnification using an optical light microscope and Axiovision software. RESULTS: The resin tag lengths in µm for each group were as follows: G1 - 36.1A; G2 - 5.8C; G3 - 14.4B; G4 - 1.7D; G5 - 6.5C. Different letters indicate statistically significant differences. CONCLUSION: Tooth bleaching with CP or HP impairs the formation of resin tags, and the utilization of sodium ascorbate increases tags length.

Correlation between hybrid layer thickness, resin tag length and microtensile bond strength of a self-etching adhesive system.

The purpose of this study was to evaluate the correlation between the hybrid layer thickness, resin tag length and resin bond strength of a self-etching adhesive system to sound dentin tissue "in vivo". After performing restorative procedures and tooth extractions, ten specimens were sectioned in a mesiodistal direction. One dental section was used for light microscope analysis, in which both the resin tag length and hybrid layer thickness were measured, while the other section was analyzed using a microtensile test (0.5 mm/min). The fractured surface of the latter section was characterized using a stereoscopic magnifying glass (40x magnifcation). The results were subject to statistical analysis using the Pearson Correlation Test (a = 0.05). The hybrid layer thickness, resin tag length and resin bond strength mean values were 2.19 microm (0.34), 4.34 microm (0.28) and 9.73 MPa (5,55), respectively. In addition, correlation tests between the resin tag length and the resin bond strength (r=0.014) and also between the hybrid layer thickness and bond strength (r=0.43), showed no statistically significant correlation. The microtensile bond strength of Adper Prompt L Pop self-etching adhesive system does not depend on hybrid layer thickness or resin tag length.

Influence of the hybrid layer thickness and resin tag length on microtensile bond strength.

The purpose of this study was to evaluate the correlation between the hybrid layer thickness/resin tag length and the microtensile bond strength of conventional two-step adhesive system, when applied to healthy dentinal tissue. After performing the restorative adhesive procedures and tooth extractions, ten specimens were sectioned in the mesiodistal direction. One section was used for microscopic analysis of the resin tag lengths and the hybrid layer thickness, while the other was used for the microtensile bond strength test (0.5 mm/min). The fractured surface was classified according to the fracture pattern, under a stereoscopic microscope at 40x magnification. Data obtained were submitted to analysis using one-way ANOVA and Pearson's Correlation test (alpha=0.05). The means corresponding to the hybrid layer thickness, resin tag lengths and the microtensile test were 2.68 microm, 6.43 microm and 16.23 MPa, respectively. There was no correlation between the means of the values obtained for the microtensile test, and those presented by the hybrid layer (r2=0.40, p>0.05) and resin tags (r2=0.21, p>0.05). The microtensile bond strength of the conventional two-step adhesive system Adper Single Bond 2 did not depend on the thickness of the hybrid layer and length of resin tags.

Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Effects of five carbamide peroxide bleaching gels on composite resin microhardness.

The purpose of this study was to evaluate the effects of five home bleaching products containing 15-16% carbamide peroxide on the microhardness of microhybrid composite resin Z-250 (3M/Espe). A total of 72 specimens were fabricated in cylindrical acrylic matrices (4 x 2 mm), filled with composite resin and photo-activated for 40 seconds. They were divided in 6 study groups (n = 12), according to the bleaching product: Review (SS White), Magic Bleaching (Vigodent), Opalescence (Ultradent), Whiteness Perfect (FGM), Claridex (Biodinâmica), and a control group (not bleached). Specimens were exposed to 1 cc of bleaching gel for 6 hours daily for 2 weeks. The control group specimens were kept in artificial saliva throughout this time. All the specimens were then analyzed in a microhardness tester. Knoop hardness measurements were performed, and the results were submitted to parametric statistical analysis (analysis of variance and Tukey's test). Mean Knoop values and standard deviation were: baseline, 68.52a (4.28); control, 63.42b (7.16); Whiteness Perfect, 57.57c (1.81); Magic Bleaching, 57.22c (3.84); Opalescence, 57.03cd (4.00); Claridex, 53.64de (3.33); Review 51.45e (2.82). Identical letters mean statistical equality according to Tukey's test at the 5% significance level. The products significantly decreased Z-250 (3M/Espe) microhardness.

Influence of pain-relieving therapies on inflammation and the expression of proinflammatory neuropeptides after dental bleaching treatment.

OBJECTIVES: To minimize the tooth sensitivity caused by in-office bleaching, many dentists use non-steroidal anti-inflammatory drugs and topical desensitizing gels containing potassium nitrate and sodium fluoride. This study aimed to evaluate the influence of these substances on inflammation and the expression of substance P and calcitonin gene-related peptide in pulp nerve fibers. MATERIALS AND METHODS: Seventy-two rats were divided into 6 groups as follows: GI, control; GII, only dental bleaching; GIII, only ibuprofen; GIV, ibuprofen administered 30 minutes before and after the bleaching treatment and every 12 hours until the analysis; GV, only topical application of a desensitizing agent; and GVI, topical application of a desensitizing agent before dental bleaching. Placebo gel was applied to the upper left jaw and the bleaching agent was applied to the upper right jaw in all groups. Subsequently, the groups were divided into 3 subgroups based on the time of analysis: 0, 24, and 48 hours after bleaching (n = 8). The rats were euthanized and the maxillae were processed and evaluated by histopathological and immunohistochemical analyses. The data were analyzed using the Kruskal-Wallis test, followed by the Dunn test (p < 0.05). RESULTS: In the bleaching groups, the inflammatory process and expression of neuropeptides decreased over time. The animals in which a desensitizing agent was applied showed better results within 24 hours. CONCLUSIONS: The use of a desensitizing agent had positive effects on inflammation and pain-related neuropeptide expression, minimizing the painful effects of dental bleaching treatment.

Correlation of the hybrid layer thickness and resin tags length with the bond strength of a self-etching adhesive system.

The objective of this study was to measure the thickness of the hybrid layer (HLT), length of resin tags (RTL) and bond strength (BS) in the same teeth, using a self-etching adhesive system Adper Prompt L Pop to intact dentin and to analyze the correlation between HLTand RTL and their BS. Ten human molars were used for the restorative procedures and each restored tooth was sectioned in mesio-distal direction. One section was submitted to light microscopy analysis of HLT and RTL (400x). Another section was prepared and submitted to the microtensile bond test (0.5 mm/min). The fractured surfaces were analyzed using scanning electron microscopy to determine the failure pattern. Correlation between HLT and RTL with the BS data was analyzed by linear regression. The mean values of HLT, RTL and BS were 3.36 microm, 12.97 microm and 14.10 MPa, respectively. No significant relationship between BS and HLT (R2= 0.011, p>0.05) and between BS and RTL (R2= 0.038) was observed. The results suggested that there was no significant correlation between the HLT and RTL with the BS of the self-etching adhesive to dentin.

Pulp response of rats submitted to bleaching and the use of different anti-inflammatory drugs.

This study aimed to evaluate neuropeptide expression after bleaching treatment using histopathological and immunohistochemical analyses and the effects of hydrocortisone and acetaminophen on pulp inflammation, sine dental bleaching and inflammation first occur, and only then, the treatmentt. Sixty-three rats were divided into three groups (n = 21) according to the pain-relieving therapy used: I-control; II-topical application of Otosporin for 10 min after the bleaching treatment; III-oral administration of paracetamol 30 min before whitening and then every 12h. In all the study groups, placebo gel was applied to the left upper jaw (control) and a 35% H2O2-based whitening gel was applied to the right upper jaw for 45 min. Seven animals from each group were euthanized at different time points: 0h after treatment, 24h, and 48h. After euthanasia, the first molar on each side was analyzed by histology and immunohistochemistry to assess the degree of inflammation and verify the presence of the neuropeptides, substance P (SP) and calcitonin gene-related peptide (CGRP). The data were analyzed using the statistical nonparametric Kruskal-Wallis test followed by Dunn's test for individual comparisons. Extensive areas of necrosis were observed in the groups that received bleaching treatment only, whereas reduced damage were obtained in the group treated with Otosporin. The immunohistochemical analysis showed positive immunolabeling in all groups, including the control, but this was stronger in the groups that received bleaching treatment. The best results were obtained in the group that received treatment with Otosporin. The use of Otosporin after dental bleaching minimized the side effects of this treatment.

Surgical and Orthodontic Treatment of Severely Intruded Permanent Incisors: A Case Report.

Traumatic dental intrusion is a serious injury and results in significant damage to the periodontal ligament, dentin-pulp complex, and alveolar bone. This article presents a case of severe intrusion of the two upper permanent central incisors where the treatment option was the combination of the surgical and orthodontic technique. The difficulty of accessing the crowns of these teeth to bond the brackets was solved by lifting a full thickness flap. To disengage the teeth from the alveolus, a careful dislocation motion was performed. After suturing the flap, a removable orthodontic appliance was installed and an extrusive force was applied for 8 weeks. After 10 weeks, the endodontic treatment was performed and the crowns were restored. The 10-year clinical control showed normal mobility. Radiographically, minor losses of the cervical alveolar cortical bone and integrity of the periodontal ligament were observed.

Influence of skin cold sensation threshold in the occurrence of dental sensitivity during dental bleaching: a placebo controlled clinical trial.

This study verified the occurrence of dental sensitivity in patients submitted to a 35% hydrogen peroxide based product (Whiteness HP Maxx 35% - FGM), skin cold sensation threshold (SCST) and its influence on dental sensitivity. Sixty volunteers were divided into 4 groups (n = 15), according to SCST (low: GI and GIII, and high: GII and IV) and bleaching treatment (hydrogen peroxide: GI and GII, and placebo: GIII and GIV). SCST was determined in the inner forearm for 6 different times using a neurosensory analyzer, the TSA II (Medoc Advanced Medical Systems, Ramat Yishai, Northern District, Israel). Dental sensitivity measurements were performed 10 different times using a thermal stimulus and an intraoral device attached to TSA II, positioned in the buccal surface of the upper right central incisor. Spontaneous dental sensitivity was also determined using the Visual Analogue Scale (VAS). Data were submitted to Student's t-test and Pearson's Correlation Test (α=0.05). SCST remained the same during bleaching treatment. Distinct responses of dental sensitivity were found in patients with low and high SCST during the first and third bleaching session (p≤0.05). The teeth submitted to the bleaching treatment became more sensitive to cold than those treated with placebo. Moreover, data obtained with TSA and VAS presented moderate correlation. Bleaching treatment increased dental sensitivity and skin cold sensation threshold might represent a determining factor in this occurrence, since low and high SCST patients had different responses to the thermal stimulus in the teeth.

Neurosensory analysis of tooth sensitivity during at-home dental bleaching: a randomized clinical trial.

Objective The objective of this study was to evaluate dental sensitivity using visual analogue scale, a Computerized Visual Analogue Scale (CoVAS) and a neurosensory analyzer (TSA II) during at-home bleaching with 10% carbamide peroxide, with and without potassium oxalate. Materials and Methods Power Bleaching 10% containing potassium oxalate was used on one maxillary hemi-arch of the 25 volunteers, and Opalescence 10% was used on the opposite hemi-arch. Bleaching agents were used daily for 3 weeks. Analysis was performed before treatment, 24 hours later, 7, 14, and 21 days after the start of the treatment, and 7 days after its conclusion. The spontaneous tooth sensitivity was evaluated using the visual analogue scale and the sensitivity caused by a continuous 0°C stimulus was analyzed using CoVAS. The cold sensation threshold was also analyzed using the TSA II. The temperatures obtained were statistically analyzed using ANOVA and Tukey's test (α=5%). Results The data obtained with the other methods were also analyzed. 24 hours, 7 and 14 days before the beginning of the treatment, over 20% of the teeth presented spontaneous sensitivity, the normal condition was restored after the end of the treatment. Regarding the cold sensation temperatures, both products sensitized the teeth (p<0.05) and no differences were detected between the products in each period (p>0.05). In addition, when they were compared using CoVAS, Power Bleaching caused the highest levels of sensitivity in all study periods, with the exception of the 14th day of treatment. Conclusion We concluded that the bleaching treatment sensitized the teeth and the product with potassium oxalate was not able to modulate tooth sensitivity.

Effect of Dental Pigmentation Intensity on the Transenamel and Transdentinal Penetration of Hydrogen Peroxide.

Abastract This study aimed to evaluate the transenamel and transdentinal penetration of hydrogen peroxide (H202) applied to bovine teeth pigmented with black tea at different intensities. The following groups were formed DW: immersion in distilled water; BT100: immersion in an infusion of 1.6 g of black tea per 100 mL distilled water; BT10: immersion in an infusion of 1.6 g black tea per 10 mL distilled water. All groups were immersed for 6 days. To quantify the penetration of H202, the specimens were placed in artificial pulp chambers (APCs) and subjected to bleaching treatment with 38% H2O2 once per week for 3 weeks. After bleaching treatment, the acetate buffer solution of APCs with peroxidase enzyme was evaluated in a reflection spectrophotometer. The transenamel and transdentinal penetration of H2O2 and the L* values obtained at T1, T2 and T3 were subjected to Kruskal-Wallis and Friedman statistical tests. At T1, the H2O2 diffusion in DW was higher than that in BT100 and BT10. At the other evaluation times, the penetration values in BT100 and BT10 increased and remained similar. The L* values increased significantly in all groups at T1. At T2, the L* values were higher in DW, while the values in BT100 and BT10 were similar to each other. At the end of the experiment, BT10 showed the lowest L* values. The pigmentation level did not affect the penetration of H2O2 through the enamel and dentin and the bleaching agent effectively changed the color of the teeth.

Evaluation of an experimental rat model for comparative studies of bleaching agents.

Dental materials in general are tested in different animal models prior to the clinical use in humans, except for bleaching agents. Objectives To evaluate an experimental rat model for comparative studies of bleaching agents, by investigating the influence of different concentrations and application times of H2O2 gel in the pulp tissue during in-office bleaching of rats' vital teeth. Material and Methods The right and left maxillary molars of 50 Wistar rats were bleached with 20% and 35% H2O2 gels, respectively, for 5, 10, 15, 30, or 45 min (n=10 rats/group). Ten animals were untreated (control). The rats were killed after 2 or 30 days, and the maxillae were examined by light microscopy. Inflammation was evaluated through histomorphometric analysis with inflammatory cell count in the coronal and radicular thirds of the pulp. Fibroblasts were also counted. Scores were attributed to odontoblastic layer and vascular changes. Tertiary dentin area and pulp chamber central area were measured histomorphometrically. Data were compared by analysis of variance and Kruskal-Wallis test (p<0.05). Results After 2 days, the amount of inflammatory cells increased in the coronal pulp occlusal third up to the 15-min application groups of each bleaching gel. In the groups exposed to each concentration for 30 and 45 min, the number of inflammatory cells decreased along with the appearance of necrotic areas. After 30 days, reduction on the pulp chamber central area and enlargement of the tertiary dentin area were observed, without the detection of inflammation areas. Conclusion The rat model of extracoronal bleaching showed to be adequate for studies of bleaching protocols, as it was possible to observe alterations in the pulp tissues and tooth structure caused by different concentrations and application periods of bleaching agents.

Evaluation of an experimental rat model for comparative studies of bleaching agents.

UNLABELLED: Dental materials, in general, are tested in different animal models prior to their clinical use in humans, except for bleaching agents. OBJECTIVES: To evaluate an experimental rat model for comparative studies of bleaching agents by investigating the influence of different concentrations and application times of H2O2 gel in the pulp tissue during in-office bleaching of rats' vital teeth. MATERIAL AND METHODS: The right and left maxillary molars of 50 Wistar rats were bleached with 20% and 35% H2O2 gels, respectively, for 5, 10, 15, 30, or 45 min (n=10 rats/group). Ten animals (control) were untreated. The rats were killed after 2 or 30 days, and the maxillae were examined by light microscopy. Inflammation was evaluated by histomorphometric analysis with inflammatory cell counting in the coronal and radicular thirds of the pulp. The counting of fibroblasts was also performed. Scores were attributed to the odontoblastic layer and to vascular changes. The tertiary dentin area and the pulp chamber central area were histomorphometrically measured. Data were compared by the analysis of variance and the Kruskal-Wallis test (p<0.05). RESULTS: After 2 days, the amount of inflammatory cells increased in the occlusal third of the coronal pulp until the time of 15 min for both concentrations of bleaching gels. In 30 and 45 min groups of each concentration, the number of inflammatory cells decreased along with the appearance of necrotic areas. After 30 days, a reduction in the pulp chamber central area and an enlargement of tertiary dentin area were observed without the detection of inflammation areas. CONCLUSION: The rat model of extra coronal bleaching showed to be adequate for bleaching protocols studies, as it was possible to observe alterations in the pulp tissues and in the tooth structure caused by different concentrations and periods of application of bleaching agents.

Penetration Capacity, Color Alteration and Biological Response of Two In-office Bleaching Protocols.

Hydrogen peroxide (H2O2) penetrates into the dental hard tissues causing color alteration but also alterations in pulpal tissues. Hard-tissue penetration, color alteration and the pulp response alterations were evaluated for two in-office bleaching protocols with H2O2. For trans-enamel/dentin penetration and color alteration, discs of bovine teeth were attached to an artificial pulp chamber and bleached according to the groups: BLU (20% H2O2 - 1x50 min, Whiteness HP Blue); MAX (35% H2O2 - 3x15 min, Whiteness HP Maxx); Control (1x50 min, placebo). Trans-enamel/dentin penetration was quantified based on the reaction of H2O2 with leucocrystal violet and the color analyzed by CIELab System. Twenty Wistar rats were divided into two groups (BLU and MAX) and their maxillary right molars were treated according to the same protocols of the in vitro study; the maxillary left molars were used as controls. After 2 days, the animals were killed and their maxillae were examined by light microscopy. The inflammation of pulp tissue was scored according to the inflammatory infiltrate (1, absent; 2, mild; 3, moderate; 4, severe/necrosis). Data were analyzed by statistical tests (α=0.05). MAX showed higher trans-enamel/dentinal penetration of H2O2 (p<0.05). The color alteration was similar for both groups (p>0.05), and different when compared to Control group (p<0.05). MAX showed severe inflammation in the upper thirds of the coronal pulp, and BLU showed moderate inflammation (p<0.05). In-office bleaching protocols using lower concentrations of hydrogen peroxide should be preferred due to their reduced trans-enamel/dentinal penetration since they cause less pulp damage and provide same bleaching efficiency.

Quantitative Sensory Testing of the Effect of Desensitizing Treatment After Dental Bleaching.

The aim of this study was to quantify tooth sensitivity during bleaching and after a desensitizing treatment. Sensitivity was measured with a new device, TSA-II, which uses thermal stimuli for Quantitative Sensory Testing (QST). Ten patients underwent bleaching treatment using Whiteness HP Maxx (FGM Produtos Odontológicos Ltda) containing 35% hydrogen peroxide. After the bleaching session, the teeth were cleaned with air/water spray and the product Desensibilize KF 2% (FGM Produtos Odontológicos Ltda) was applied to the upper left teeth. Saline solution at room temperature was applied in the upper right teeth. QST was performed before bleaching, immediately after bleaching, and immediately after desensitizing treatment. In order to standardize tooth analysis, a 100% ethylene copolymer and vinyl acetate tray with circular perforations was used during measurements. Analysis of variance and the Student's t-test were used (a=0.05). Mean temperatures (SD) of cold sensation threshold for the upper right quadrant were: BB-13.898 (4.81), AB- 19.241 (3.68), AD-20.646 (3.72) and for the upper left quadrant they were: BB-14.102 (3.22), AB-19.646 (4.82), AD- 13.835 (3.63). Dental bleaching with highly concentrated peroxides changed dental cold sensation thresholds, but the topical desensitizer changed the immediate cold sensation thresholds produced by the cold stimulus.

O objetivo do presente estudo foi quantificar a sensibilidade dentária durante o tratamento clareador e após a aplicação de um dessensibilizante utilizando um equipamento de análise neurosensorial, o TSA II, que utiliza estímulos térmicos para a realização do Teste Sensorial Quantitativo (QST). Assim, dez pacientes (n=10) receberam o tratamento clareador com Whiteness HP Maxx (FGM Produtos Odontológicos Ltda.) contendo peróxido de hidrogênio a 35%. Após a sessão clareadora, os dentes foram limpos com jatos de ar/água e foi realizada a aplicação do Desensibilize KF 2% (FGM Produtos Odontológicos Ltda.), um dessensibilizante tópico a base de nitrato de potássio a 5% e fluoreto de sódio a 2%, apenas no hemi-arco esquerdo da maxila, utilizando o método da boca dividida. No hemi-arco direito foi aplicada uma solução salina a temperatura ambiente (controle). O QST foi realizado antes do clareamento (AC), imediatamente depois do clareamento (DC) e imediatamente após a aplicação do dessensibilizante (DD). Para padronizar o local do estímulo, uma moldeira de acetato com perfurações circulares foi utilizada durante as mensurações. A análise estatística foi realizada por meio do teste t de Student (α=0,05). As temperaturas médias (DP) do limiar de sensação ao frio para o hemi-arco direito foram: AC- 13,898 (4,81), DC-19,241 (3,68), DD-20,646 (3,72) e para o hemi-arco esquerdo foram: AC-14,102 (3,22), DC-19,646 (4,82), DD-13,835 (3,63). Clareamento dental com peróxidos de alta concentração exacerbaram a sensibilidade dental ao estímulo térmico e o uso do dessensibilizante foi efetivo para reverter esta situação.

The number of bleaching sessions influences pulp tissue damage in rat teeth.

INTRODUCTION: Hydrogen peroxide tooth bleaching is claimed to cause alterations in dental tissue structures. This study investigated the influence of the number of bleaching sessions on pulp tissue in rats. METHODS: Male Wistar rats were studied in 5 groups (groups 1S-5S) of 10 each, which differed by the number (1-5) of bleaching sessions. In each session, the animals were anesthetized, and 35% hydrogen peroxide gel was applied to 3 upper right molars. Two days after the experimental period, the animals were killed, and their jaws were processed for light microscope evaluation. Pulp tissue reactions were scored as follows: 1, no or few inflammatory cells and no reaction; 2, <25 cells and a mild reaction; 3, between 25 and 125 cells and a moderate reaction; and 4, 125 or more cells and a severe reaction. Results from each experimental group were compared between groups and within groups to the corresponding unbleached upper left molars and analyzed for significant differences using the Kruskal-Wallis test (P < .05). RESULTS: All tissue sections showed significant bleaching-induced changes in the dental pulp. After 1 bleaching session, necrotic tissue in the pulp horns and underlying inflammatory changes were observed. The extent and intensity of these changes increased with the number of bleaching sessions. After 5 sessions, the changes included necrotic areas in the pulp tissue involving the second third of the radicular pulp and intense inflammation in the apical third. CONCLUSIONS: The number of bleaching sessions directly influenced the extent of pulp damage.

Influence of skin cold sensation threshold in the occurrence of dental sensitivity during dental bleaching: a placebo controlled clinical trial

Abstract Objective This study verified the occurrence of dental sensitivity in patients submitted to a 35% hydrogen peroxide based product (Whiteness HP Maxx 35% - FGM), skin cold sensation threshold (SCST) and its influence on dental sensitivity. Material and Methods Sixty volunteers were divided into 4 groups (n = 15), according to SCST (low: GI and GIII, and high: GII and IV) and bleaching treatment (hydrogen peroxide: GI and GII, and placebo: GIII and GIV). SCST was determined in the inner forearm for 6 different times using a neurosensory analyzer, the TSA II (Medoc Advanced Medical Systems, Ramat Yishai, Northern District, Israel). Dental sensitivity measurements were performed 10 different times using a thermal stimulus and an intraoral device attached to TSA II, positioned in the buccal surface of the upper right central incisor. Spontaneous dental sensitivity was also determined using the Visual Analogue Scale (VAS). Data were submitted to Student's t-test and Pearson's Correlation Test (α=0.05). SCST remained the same during bleaching treatment. Results Distinct responses of dental sensitivity were found in patients with low and high SCST during the first and third bleaching session (p≤0.05). The teeth submitted to the bleaching treatment became more sensitive to cold than those treated with placebo. Moreover, data obtained with TSA and VAS presented moderate correlation. Conclusions Bleaching treatment increased dental sensitivity and skin cold sensation threshold might represent a determining factor in this occurrence, since low and high SCST patients had different responses to the thermal stimulus in the teeth.

Neurosensory analysis of tooth sensitivity during at-home dental bleaching: a randomized clinical trial

Abstract Objective The objective of this study was to evaluate dental sensitivity using visual analogue scale, a Computerized Visual Analogue Scale (CoVAS) and a neurosensory analyzer (TSA II) during at-home bleaching with 10% carbamide peroxide, with and without potassium oxalate. Materials and Methods Power Bleaching 10% containing potassium oxalate was used on one maxillary hemi-arch of the 25 volunteers, and Opalescence 10% was used on the opposite hemi-arch. Bleaching agents were used daily for 3 weeks. Analysis was performed before treatment, 24 hours later, 7, 14, and 21 days after the start of the treatment, and 7 days after its conclusion. The spontaneous tooth sensitivity was evaluated using the visual analogue scale and the sensitivity caused by a continuous 0°C stimulus was analyzed using CoVAS. The cold sensation threshold was also analyzed using the TSA II. The temperatures obtained were statistically analyzed using ANOVA and Tukey's test (α=5%). Results The data obtained with the other methods were also analyzed. 24 hours, 7 and 14 days before the beginning of the treatment, over 20% of the teeth presented spontaneous sensitivity, the normal condition was restored after the end of the treatment. Regarding the cold sensation temperatures, both products sensitized the teeth (p<0.05) and no differences were detected between the products in each period (p>0.05). In addition, when they were compared using CoVAS, Power Bleaching caused the highest levels of sensitivity in all study periods, with the exception of the 14th day of treatment. Conclusion We concluded that the bleaching treatment sensitized the teeth and the product with potassium oxalate was not able to modulate tooth sensitivity.