RESUMEN
Achromatic quarter waveplates (A-QWPs), traditionally constructed from multiple birefringent crystals, can modulate light polarization and retardation across a broad range of wavelengths. This mechanism is inherently related to phase retardation controlled by the fast and slow axis of stacked multi-birefringent crystals. However, the conventional design of A-QWPs requires the incorporation of multiple birefringent crystals, which complicates the manufacturing process and raises costs. Here, we report the discovery of a broadband (540-1060 nm) A-QWP based on a two-dimensional (2D) layered hybrid copper halide (HCH) perovskite single crystal. The 2D copper chloride (CuCl6) layers of the HCH crystal undergo Jahn-Teller distortion and subsequently trigger the in-plane optical birefringence. Its broad range of the wavelength response as an A-QWP is a consequence of the out-of-plane mosaicity formed among the stacked inorganic layers during the single-crystal self-assembly process in the solution phase. Given the versatility of 2D hybridhalide perovskites, the 2D HCH crystal offers a promising approach for designing cost-effective A-QWPs and the ability to integrate other optical devices.
RESUMEN
In-line rotatable rhombs that are only weakly chromatic are desired as compensators for a wide variety of applications in spectroscopic polarimetry and Mueller matrix spectroscopic ellipsometry. These devices employ multiple total internal reflections to generate differences in the phase shifts upon reflection for orthogonal fast and slow axis optical electric field components. A framework has been developed for characterization of non-idealities in the performance of rhombs due to dissipation and associated dichroism upon each reflection as well as stress-induced birefringence along each beam path. External oblique reflection measurements by spectroscopic ellipsometry for the internally reflecting interface structures has enabled characterization of the dichroic effects and retardance generated by the reflections. The framework for analysis of the effects of stress relies on simulations demonstrating that the contributions to polarization modification from each beam path depend only on the accumulated stress-induced retardance and average azimuthal angle of the fast principal stress axis along the given path. The overall approach has been applied to straight-through Mueller matrix measurements of a three-reflection rhomb in its operational configuration to establish the set of stress parameters for each of the four beam paths needed to fit the measurements. Thus, device geometry and optical structure, including layer thicknesses and component media optical properties, as well as stress-induced retardances and average stress azimuthal angles, which are all deduced in the analysis, enable a complete description of the polarization modifying properties of the rhomb when serving as a compensator.
RESUMEN
Flux calibrations in multi-source thermal co-evaporation of thin films have been developed based on real-time spectroscopic ellipsometry (RTSE) measurements. This methodology has been applied to fabricate CuInSe2 (CIS) thin film photovoltaic (PV) absorbers, as an illustrative example, and their properties as functions of deposition rate have been studied. In this example, multiple Cu layers are deposited step-wise onto the same Si wafer substrate at different Cu evaporation source temperatures (TCu). Multiple In2Se3 layers are deposited similarly at different In source temperatures (TIn). Using RTSE, the Cu and In2Se3 deposition rates are determined as functions of TCu and TIn. These rates, denoted Reff, are measured in terms of effective thickness which is the volume per planar substrate area and accounts for surface roughness variations with deposition time. By assuming that all incident metal atoms are incorporated into the films and that the atomic concentrations in the deposited material components are the same as in single crystals, initial estimates of the Cu and In atom fluxes can be made versus TCu and TIn. Applying these estimates to the co-evaporation of a set of CIS films from individual Cu, In, and Se sources, atomic concentration corrections can be assigned to the Cu and In2Se3 calibration films. The corrections enable generation of a novel calibration diagram predicting the atomic ratio y = [Cu]/[In] and rate Reff within the TCu-TIn plane. Using this diagram, optimization of the CIS properties as a PV absorber can be achieved versus both y and Reff.
RESUMEN
Novel benzofurazan derivatized triazole linked mono and di-glucopyranosyl conjugates (L1, and L2) have been synthesized by Cu+1 catalyzed alkyne-azide 1,3 dipolar cycloaddition reaction. All the precursors and the molecules (L1, and L2) were isolated and characterized by 1H & 13C NMR, and ESI-MS. The glycoconjugates have been studied with fourteen different anions for their selective recognition in solution. Among the anions studied L1 exhibited selective fluorescent sensing properties upon binding with F- by showing a 151 ± 8 fold decrease in the emission intensity at 518 nm. The minimum detection limit for F- in acetonitrile was found to be 124 ± 5 ppb. A hypsochromic shift (â¼60 nm) of the 450 nm band of L1 was observed upon the interaction with F- through the formation of hydrogen bonding of -NH moiety. The coordination features of [L1+F-] complex were established by Density Functional Theory (DFT) computational studies. The outcome of the study of new glycoconjugates based recognition promotes the emerging of new biological sensor diagnostic tools in the future.
Asunto(s)
Fluoruros , Triazoles , Acetonitrilos , Alquinos , Aniones/química , Azidas , Benzoxazoles , Flúor , Espectrometría de FluorescenciaRESUMEN
Lower rim 1,3-diamido conjugates of calix[4]arene have been synthesized and characterized, and the structures of some of these have been established by single crystal XRD. The amido-calix conjugates possessing a terminal -COOH moiety have been shown to exhibit recognition toward guest molecules possessing -COOH moiety, viz., Asp, Glu, and reduced and oxidized glutathione (GSH, GSSG), by switch-on fluorescence in aqueous acetonitrile and methanol solutions when compared to the control molecules via forming a 1:1 complex. The complex formed has been shown by mass spectrometry, and the structural features of the complexes were derived on the basis of DFT computations. The association constants observed for the recognition of Asp/Glu by Phe-calix conjugate, viz., 532/676 M(-1), are higher than that reported for the recognition of Val, Leu, Phe, His, and Trp (16-63 M(-1)) by a water-soluble calixarene (Arena, G., et al. Tetrahedron Lett. 1999, 40, 1597). For this recognition, there should be a free -COOH moiety from the guest molecule. AFM, SEM, and DLS data exhibited spherical particles with a hundred-fold reduction in the size of the complexes when compared to the particles of the precursors. These spherical particles have been computationally modeled to possess hexameric species reminiscent of the hexameric micellar structures shown for a Ag(+) complex of a calix[6]arene reported in the literature (Houmadi, S., et al. Langmuir 2007, 23, 4849). Both AFM and TEM studies demonstrated the formation of nanospheres in the case of GSH-capped Ag nanoparticles in interaction with the amido-calix conjugate that possesses terminal -COOH moiety. The AFM studies demonstrated in this paper have been very well applied to albumin proteins to differentiate the aggregational behavior and nanostructural features exhibited by the complexes of proteins from those of the uncomplexed ones. To our knowledge, this is the first report wherein a amido-calix[4]arene conjugate and its amino acid/peptide/protein complexes have been differentiated on the basis of spectroscopy and microscopy studies followed by species modeling by computations.
Asunto(s)
Aminoácidos/química , Calixarenos/síntesis química , Fenoles/síntesis química , Proteínas/química , Calixarenos/química , Computadores Moleculares , Cristalografía por Rayos X , Espectroscopía de Resonancia Magnética , Microscopía , Modelos Moleculares , Fenoles/química , Unión ProteicaRESUMEN
Motivated by their utility in CdTe-based thin film photovoltaics (PV) devices, an investigation of thin films of the magnesium-zinc oxide (MgxZn1-xO or MZO) alloy system was undertaken applying spectroscopic ellipsometry (SE). Dominant wurtzite phase MZO thin films with Mg contents in the range 0 ≤ x ≤ 0.42 were deposited on room temperature soda lime glass (SLG) substrates by magnetron co-sputtering of MgO and ZnO targets followed by annealing. The complex dielectric functions ε of these films were determined and parameterized over the photon energy range from 0.73 to 6.5 eV using an analytical model consisting of two critical point (CP) oscillators. The CP parameters in this model are expressed as polynomial functions of the best fitting lowest CP energy or bandgap E0 = Eg, which in turn is a quadratic function of x. As functions of x, both the lowest energy CP broadening and the Urbach parameter show minima for x ~ 0.3, which corresponds to a bandgap of 3.65 eV. As a result, it is concluded that for this composition and bandgap, the MZO exhibits either a minimum concentration of defects in the bulk of the crystallites or a maximum in the grain size, an observation consistent with measured X-ray diffraction line broadenings. The parametric expression for ε developed here is expected to be useful in future mapping and through-the-glass SE analyses of partial and complete PV device structures incorporating MZO.
RESUMEN
Several C(1)-imino conjugates of D: -galactose, D: -lactose and D: -ribose, where the nitrogen center was substituted by the salicylidene or naphthylidene, were synthesized and characterized. Similar C(2)-imino conjugates of D: -glucose have also been synthesized. All the glyco-imino-conjugates, which are transition state analogues, exhibited 100% inhibition of the activity towards glycosidases extracted from soybean and jack bean meal. Among these, a galactosyl-napthyl-imine-conjugate (1c) showed 50% inhibition of the activity of pure alpha-mannosidase from jack bean at 22 +/- 2.5 microM, and a ribosyl-naphthyl-imine-conjugate (3c) showed at 31 +/- 5.5 microM and hence these conjugates are potent inhibitors of glycosidases. The kinetic studies suggested non-competitive inhibition by these conjugates. The studies are also suggestive of the involvement of aromatic, imine and carbohydrate moieties of the glyco-imino-conjugates in the effective inhibition. The binding of glyco-imino-conjugate has been established by extensive studies carried out using fluorescence emission and isothermal titration calorimetry. The conformational changes resulted in the enzyme upon interaction of these derivatives has been established by studying the fluorescence quench of the enzyme by KI as well as from the secondary structural changes noticed in CD spectra. All these studies revealed the difference in the binding strengths of the naphthylidene vs. salicylidene as well as galactosyl vs. lactosyl moieties present in these conjugates. The differential inhibition of these glyco-conjugates has been addressed by quantifying the specific interactions present between the glyco-conjugates and the enzyme by using rigid docking studies.
Asunto(s)
Fabaceae/enzimología , Glycine max/enzimología , Glicoconjugados/química , Glicoconjugados/farmacología , Glicósido Hidrolasas/antagonistas & inhibidores , Glicósido Hidrolasas/aislamiento & purificación , Modelos Moleculares , Aminoácidos/metabolismo , Calorimetría , Conformación de Carbohidratos , Dominio Catalítico , Dicroismo Circular , Glicósido Hidrolasas/química , Concentración 50 Inhibidora , Cinética , Estructura Secundaria de Proteína , Espectrometría de Fluorescencia , VolumetríaRESUMEN
A structurally characterized lower rim 1,3-di{bis(2-picolyl)}amide derivative of calix[4]arene (L) exhibits high selectivity toward Ag(+) by forming a 1:1 complex, among nine other biologically important metal ions, viz., Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), and Zn(2+), as studied by fluorescence, absorption, and (1)H NMR spectroscopy. The 1:1 complex formed between L and Ag(+) has been further proven on the basis of ESI mass spectrometry and has been shown to have an association constant, K(a), of 11,117 +/- 190 M(-1) based on fluorescence data. L acts as a primary ratiometric sensor toward Ag(+) by switch-on fluorescence and exhibits a lowest detectable concentration of 450 ppb. DFT computational studies carried out in mimicking the formation of a 1:1 complex between L and Ag(+) resulted in a tetrahedral complex wherein the nitrogens of all four pyridyl moieties present on both arms are being coordinated. Whereas these pyridyls are located farther apart in the crystal structure, appropriate dihedral changes are induced in the arms in the presence of silver ion in order to form a coordination complex. Even the nanostructural features obtained in TEM clearly differentiates L from its Ag(+) complex. The in situ prepared silver complex of L detects Cys ratiometrically among the naturally occurring amino acids to a lowest concentration of 514 ppb by releasing L from the complex followed by formation of the cysteine complex of Ag(+). These were demonstrated on the basis of emission, absorption, (1)H NMR, and ESI mass spectra. The INH logic gate has also been generated by choosing Ag(+) and Cys as input and by monitoring the output signal at 445 nm that originates from the excimer emission of L in the presence of Ag(+). Thus L is a potential primary sensor toward Ag(+) and is a secondary sensor toward Cys.
Asunto(s)
Calixarenos/química , Cisteína/química , Plata/química , Cristalografía por Rayos X , Espectroscopía de Resonancia Magnética , Microscopía/métodos , Microscopía Electrónica de Transmisión , Espectrometría de Fluorescencia , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Amide linked lower rim 1,3-dibenzimidazole derivative of calix[4]arene, L has been shown to be sensitive and selective to Hg(2+) in aqueous acetonitrile solution based on fluorescence spectroscopy, and the stoichiometry of the complexed species has been found to be 1:1. The selectivity of L toward Hg(2+) has been shown among 11 M(2+) ions, viz., Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ca(2+), and Mg(2+) studied, including those of the mercury group and none of these ions impede the recognition of Hg(2+) by L. Role of the solvent on the recognition of Hg(2+) has been demonstrated. The role of calix[4]arene platform and the benzimidazole moieties in the recognition of Hg(2+) by L has been delineated upon performing such studies with five different molecules of relevance as reference molecular systems. The binding cores formed by the receptor L and the reference compounds have been established based on the single crystal XRD structures, and the preferential metal ion binding cores have been discussed. The binding of Hg(2+) with L has been further established based on (1)H and (13)C NMR, ESI MS, absorption, and fluorescence lifetime measurements. Some of these techniques have been used to establish the stoichiometry of the species formed. The complex species formed between L and Hg(2+) have been isolated and characterized and found to be 1:1 species even in the isolated complex. Whereas transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) provided the nanostructural behavior of L, the TEM and SEM demonstrated that the mercury complex has different characteristics when compared to L. The TEM, SEM, and powder XRD studies revealed that whereas L is crystalline, that of the mercury complex is not, perhaps a reason for not being able to obtain single crystals of the complex. Binding characteristics of Hg(2+) toward L have been established based on the DFT computational calculations.
RESUMEN
[graph: see text] 1-(Beta-D-galactopyranosyl-1'-deoxy-1'-iminomethyl)-2-hydroxynaphthalene (L1), possessing an ONO binding core, was found to be selective for Cu2+ ions in N-[2-hydroxyethyl]piperazine-N'-[2-ethanesulfonic acid] buffer, at concentrations < or = 580 ppb, at physiological pH by eliciting switch-on behavior, whereas the other ions, viz., Mg2+, Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Zn2+, and Cd2+, caused no significant change in the fluorescence. Whereas the binding characteristics were ascertained by absorption spectroscopy, the species formed were shown by Q-TOF ES MS.
Asunto(s)
Cobre/química , Galactosa/análogos & derivados , Galactosa/química , Cationes/química , Fluorescencia , HEPES , Concentración de Iones de Hidrógeno , Metales/química , Estructura MolecularRESUMEN
This paper deals with the self-assembly of the 1:1 complex of two different amphiphiles, namely, a glucosyl-salicyl-imino conjugate (L) and phenylalanine (Phe), forming nanofibers over a period of time through pi...pi interactions. Significant enhancement observed in the fluorescence intensity of L at approximately 423 nm band and the significant decrease observed in the absorbance of the approximately 215 nm band are some characteristics of this self-assembly. Matrix-assisted laser desorption ionization/time of flight titration carried out at different time intervals supports the formation of higher aggregates. Atomic force microscopy (AFM), transmission electron microscopy, and scanning electron miscroscopy results showed the formation of nanofibers for the solutions of L with phenylalanine. In dynamic light scattering measurements, the distribution of the particles extends to a higher diameter range over time, indicating a slow kinetic process of assembly. Similar spectral and microscopy studies carried out with the control molecules support the role of the amino acid moiety over the simple -COOH moiety as well as the side chain phenyl moiety in association with the amino acid, in the formation of these fibers. All these observations support the presence of pi...pi interactions between the initially formed 1:1 complexes leading to the fiber formation. The aggregation of 1:1 complexes leading to fibers followed by the formation of bundles has been modeled by molecular mechanics studies. Thus the fiber formation with L is limited to phenylalanine and not to any other naturally occurring amino acid and hence a polymer composed of two different biocompatible amphiphiles. AFM studies carried out between the fiber forming mixture and proteins resulted in the observation that only BSA selectively adheres to the fiber among the three alpha-helical and two beta-sheet proteins studied and hence may be of use in some medical applications.
Asunto(s)
Glucosamina/análogos & derivados , Glicoconjugados/química , Fenómenos Mecánicos , Microscopía , Modelos Moleculares , Nanoestructuras/química , Fenilalanina/química , Proteínas/química , Bases de Schiff/química , Absorción , Albúminas/química , Albúminas/metabolismo , Animales , Antracenos/química , Bovinos , Dicroismo Circular , Materiales Biocompatibles Revestidos/química , Etidio/química , Glucosamina/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Luz , Unión Proteica , Estructura Secundaria de Proteína , Proteínas/metabolismo , Dispersión de Radiación , Espectrometría de Fluorescencia , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Difracción de Rayos XRESUMEN
Altering the lectin properties by chemically modified glycoconjugates can have profound effect on their biological applications. In the present case, jacalin has been chosen to study the binding aspects toward glycoconjugates modified by connecting aromatic moieties through imine conjugation at their C-1- or C-2-positions. Out of 10 glycoconjugates, the galactosyl-naphthyl imine (1c) was found to be most effective toward agglutination inhibition (260 times better than galactose), quenching fluorescence intensity, and exhibiting greater binding (K(a), 1.3 × 10(4)M(-1)) with jacalin. The specific binding of galactose conjugates and the nonspecific binding of other conjugates have been demonstrated based on ITC. Changes in the secondary structures have been addressed by far- and near-UV CD spectroscopy. The present studies demonstrated that galactose-based conjugates bind at carbohydrate recognition domain (CRD) mainly through polar interactions in addition to exhibiting some nonpolar/hydrophobic interactions, whereas the conjugates other than galactose primarily interact through hydrophobic interactions. Binding of galactosyl conjugates at CRD has been further demonstrated by rigid docking.
Asunto(s)
Simulación por Computador , Glicoconjugados/química , Glicoconjugados/metabolismo , Modelos Moleculares , Lectinas de Plantas/metabolismo , Aglutinación/efectos de los fármacos , Calorimetría , Conformación de Carbohidratos , Glicoconjugados/farmacología , Lectinas de Plantas/química , Espectrometría de Fluorescencia , Análisis EspectralRESUMEN
A galactosyl-naphthyl-imine-based derivative, 1-(beta-D-galactopyranosyl-1'-deoxy-1'-iminomethyl)-2-hydroxynaphthalene (GNI), and a galactosyl-naphthyl-amine-based derivative, 1-(galactopyranosyl-1'-deoxy-1'-aminomethyl)-2-hydroxynaphthalene (GNA), possessing an ONO binding core were studied for their recognition of naturally occurring amino acids using fluorescence and absorption spectroscopy, and the corresponding association constants were derived for the complexes formed. The complexes formed between GNI/GNA and amino acids were supported by electrospray ionization mass spectrometry (ESI/MS). The structures of the complexes were optimized by computational studies using density functional theory, and stabilization energies were computed for the complexes to substantiate the interactions present between GNI/GNA and amino acid. The interactions were found to be primarily hydrogen bonding in nature. These interactions are reminiscent of those present in the lectin-carbohydrate and glycosidase substrate. Thus, the carbohydrate moiety present in GNI shows high specificity toward the -COOH group of the amino acid, which may be relevant to such interactions present between the carbohydrates and the polypeptides.