Chemically Gradient Hydrogen-Bonded Organic Framework Crystal Film.

Hydrogen-bonded organic frameworks (HOFs) are ordered supramolecular solid structures, however, nothing much explored as centimetre-scale self-standing films. The fabrication of such crystals comprising self-supported films is challenging due to the limited flexibility and interaction of the crystals, and therefore studies on two-dimensional macrostructures of HOFs are limited to external supports. Herein, we introduce a novel chemical gradient strategy to fabricate a crystal-deposited HOF film on an in situ-formed covalent organic polymer film (Tam-Bdca-CGHOF). The fabricated film showed versatility in chemical bonding along its thickness from covalent to hydrogen-bonded network. The kinetic-controlled Tam-Bdca-CGHOF showed enhanced proton conductivity (8.3×10-5  S cm-1 ) compared to its rapid kinetic analogue, Tam-Bdca-COP (2.1×10-5  S cm-1 ), which signifies the advantage of bonding-engineering in the same system.

Solid-State Photo-NMR Study on Light-Induced Nitrosyl Linkage Isomers Uncovers Their Structural, Electronic, and Diamagnetic Nature.

A light-induced linkage NO isomer (MS1) in trans-[Ru(15NO)(py)419F](ClO4)2 is detected and measured for the first time by solid-state MAS NMR. Chemical shift tensors of 15N and 19F, along with nJ(15N-19F) spin-spin couplings and T1 relaxation times of MS1, are compared with the ground state (GS) at temperatures T < 250 K. Isotropic chemical shifts (15N and 19F) are well resolved for two crystallographically independent cations (A and B) [Ru(15NO)(py)419F]2+, allowing to define separately both populations of MS1 isomers and thermal decay rates for two structural sites. The relaxation times T1 of 19F in the case of GS (30/38.6 s for sites A/B) and MS1 (11.6/11.8 s for sites A/B) indicate that both isomers are diamagnetic, which is the first experimental evidence of diamagnetic properties of MS1 in ruthenium nitrosyl. After light irradiation (λ = 420 nm), the NO ligand rotates by nearly 180° from F-Ru-N-O to F-Ru-O-N, whereby the isotropic chemical shifts of δiso(15N) increase and those of δiso(19F) decrease. The nJ(15N-19F) couplings increase from 2J(15N-Ru-19F)GS = 71 Hz to 3J(15N-O-Ru-19F)MS1 = 105 Hz. These results are interpreted on the basis of DFT-CASTEP calculations including Bader-, Mulliken-, and Hirshfeld-charge density distributions of both states.

Strategies for the Controlled Covalent Double Functionalization of Graphene Oxide.

Graphene oxide (GO) is a versatile platform with unique properties that have found broad applications in the biomedical field. Double functionalization is a key aspect in the design of multifunctional GO with combined imaging, targeting, and therapeutic properties. Compared to noncovalent functionalization, covalent strategies lead to GO conjugates with a higher stability in biological fluids. However, only a few double covalent functionalization approaches have been developed so far. The complexity of GO makes the derivatization of the oxygenated groups difficult to control. The combination of a nucleophilic epoxide ring opening with the derivatization of the hydroxyl groups through esterification or Williamson reaction was investigated. The conditions were selective and mild, thus preserving the structure of GO. Our strategy of double functionalization holds great potential for different applications in which the derivatization of GO with different molecules is needed, especially in the biomedical field.

Kinetics of 1H-13C multiple-contact cross-polarization as a powerful tool to determine the structure and dynamics of complex materials: application to graphene oxide.

Hartmann-Hahn cross-polarization (HHCP) is the most widely used solid-state NMR technique to enhance the magnetization of dilute spins from abundant spins. Furthermore, as the kinetics of CP depends on dipolar interactions, it contains valuable information on molecular structure and dynamics. In this work, analytical solutions are derived for the kinetics of HHCP and multiple-contact CP (MC-CP) using both classical and non-classical spin-coupling models including the effects of molecular dynamics and several 1H, 13C relaxation and 1H-13C CP experiments are performed in graphene oxide (GO). HHCP is found to be inefficient in our GO sample due to very fast 1H T1ρ relaxation. By contrast, the MC-CP technique which alleviates most of the magnetization loss by 1H T1ρ relaxation leads to a much larger polarization transfer efficiency reducing the measuring time by an order of magnitude. A detailed analysis of the HHCP and MC-CP kinetics indicates the existence of at least two different kinds of hydroxyl (C-OH) functional groups in GO, the major fraction (∼90%) of these groups being in the unusual "slow CP regime" in which the rate of 1H T1ρ relaxation is fast compared to the rate of cross-polarization. This 13C signal component is attributed to mobile C-OH groups interacting preferentially with fast-relaxing water molecules while the remaining carbons (∼10%) in the usual "fast CP regime" are assigned to C-OH groups involved in hydrogen bonding with neighboring hydroxyl and/or epoxy groups.

Synthesis of Robust MOFs@COFs Porous Hybrid Materials via an Aza-Diels-Alder Reaction: Towards High-Performance Supercapacitor Materials.

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have attracted enormous attention in recent years. Recently, MOF@COF are emerging as hybrid architectures combining the unique features of the individual components to enable the generation of materials displaying novel physicochemical properties. Herein we report an unprecedented use of aza-Diels-Alder cycloaddition reaction as post-synthetic modification of MOF@COF-LZU1, to generate aza-MOFs@COFs hybrid porous materials with extended π-delocalization. A a proof-of-concept, the obtained aza-MOFs@COFs is used as electrode in supercapacitors displaying specific capacitance of 20.35 µF cm-2 and high volumetric energy density of 1.16 F cm-3 . Our approach of post-synthetic modification of MOFs@COFs hybrids implement rational design for the synthesis of functional porous materials and expands the plethora of promising application of MOFs@COFs hybrid porous materials in energy storage applications.

Trichogin GA IV Alignment and Oligomerization in Phospholipid Bilayers.

Trichogin GA IV is a short peptaibol with antimicrobial activity. This uncharged, but amphipathic, sequence is aligned at the membrane interface and undergoes a transition to an aggregated state that inserts more deeply into the membrane, an assembly that predominates at a peptide-to-lipid ratio (P/L) of 1:20. In this work, the natural trichogin sequence was prepared and reconstituted into oriented lipid bilayers. The 15 N NMR chemical shift is indicative of a well-defined alignment of the peptide parallel to the membrane surface at P/Ls of 1:120 and 1:20. When the P/L is increased to 1:8, an additional peptide topology is observed that is indicative of a heterogeneous orientation, with helix alignments ranging from around the magic angle to perfectly in-plane. The topological preference of the trichogin helix for an orientation parallel to the membrane surface was confirmed by attenuated total reflection FTIR spectroscopy. Furthermore, 19 F CODEX experiments were performed on a trichogin sequence with 19 F-Phe at position 10. The CODEX decay is in agreement with a tetrameric complex, in which the 19 F sites are about 9-9.5 Šapart. Thus, a model emerges in which the monomeric peptide aligns along the membrane surface. When the peptide concentration increases, first dimeric and then tetrameric assemblies form, made up from helices oriented predominantly parallel to the membrane surface. The formation of these aggregates correlates with the release of vesicle contents including relatively large molecules.

A Straightforward Approach to Multifunctional Graphene.

Graphene has been covalently functionalized through a one-pot reductive pathway using graphite intercalation compounds (GICs), in particular KC8 , with three different orthogonally protected derivatives of 4-aminobenzylamine. This novel multifunctional platform exhibits excellent bulk functionalization homogeneity (Hbulk ) and degree of addition while preserving the chemical functionalities of the organic addends through different protecting groups, namely: tert-butyloxycarbonyl (Boc), benzyloxycarbonyl (Cbz) and phthalimide (Pht). We have employed (temperature-dependent) statistical Raman spectroscopy (SRS), X-ray photoelectron spectroscopy (XPS), magic angle spinning solid state 13 C NMR (MAS-NMR), and a characterization tool consisting of thermogravimetric analysis coupled with gas chromatography and mass spectrometry (TG-GC-MS) to unambiguously demonstrate the covalent binding and the chemical nature of the different molecular linkers. This work paves the way for the development of smart graphene-based materials of great interest in biomedicine or electronics, to name a few, and will serve as a guide in the design of new 2D multifunctional materials.

Redox-Responsive Covalent Organic Nanosheets from Viologens and Calix[4]arene for Iodine and Toxic Dye Capture.

Owing to their chemical and thermal stabilities, high uptake capacities, and easy recyclability, covalent organic polymers (COPs) have shown promise as pollutant sponges. Herein, we describe the use of diazo coupling to synthesize two cationic COPs, COP1++ and COP2++ , that incorporate a viologen-based molecular switch and an organic macrocycle, calix[4]arene. The COPs form nanosheets that have height profiles of 6.00 nm and 8.00 nm, respectively, based on AFM measurements. The sheets remain morphologically intact upon one- or two-electron reductions of their viologen subunits. MD simulations of the COPs containing dicationic viologens indicate that the calix[4]arenes adopt a partial cone conformation and that, in height, the individual 2D polymer layers are 5.48 Šin COP1++ and 5.65 Šin COP2++ , which, together with the AFM measurements, suggests that the nanosheets are composed of 11 and 14 layers, respectively. Whether their viologens are in dicationic, radical cationic, or neutral form, the COPs exhibit high affinity for iodine, reaching up to 200 % mass increase when exposed to iodine vapor at 70 °C, which makes the materials among the best-performing nanosheets for iodine capture reported in the literature. In addition, the COPs effectively remove Congo red from solution in the pH range of 2-10, reaching nearly 100 % removal within 15 minutes at acidic pH.

pH-Dependent Membrane Interactions of the Histidine-Rich Cell-Penetrating Peptide LAH4-L1.

The histidine-rich designer peptide LAH4-L1 exhibits antimicrobial and potent cell-penetrating activities for a wide variety of cargo including nucleic acids, polypeptides, adeno-associated viruses, and nanodots. The non-covalent complexes formed between the peptide and cargo enter the cell via an endosomal pathway where the pH changes from neutral to acidic. Here, we investigated the membrane interactions of the peptide with phospholipid bilayers and its membrane topology using static solid-state NMR spectroscopy. Oriented 15N solid-state NMR indicates that in membranes composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS) 3:1 mol/mole and at neutral pH, the peptide adopts transmembrane topologies. Furthermore, 31P and 2H solid-state NMR spectra show that liquid crystalline 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and POPC/POPS 3:1 liposomes retain a bilayer macroscopic phase even at the highest peptide concentrations investigated, with an oblate orientational distribution of the phospholipids at a peptide/lipid ratio of 1:5. At pH 5, as it occurs in the endosome, the alignment of LAH4-L1 at a peptide/lipid ratio of 1:25 is predominantly parallel to POPC/POPS 3:1 bilayers (prolate deformation) when at the same time it induces a considerable decrease of the deuterium order parameter of POPC/2H31-POPS 3:1. In addition, when studied in mechanically supported lipid membranes, a pronounced disordering of the phospholipid alignment is observed. In the presence of even higher peptide concentrations, lipid spectra are observed that suggest the formation of magnetically oriented or isotropic bicelles. This membrane-disruptive effect is enhanced for gel phase DMPC membranes. By protonation of the four histidines in acidic environments, the overall charge and hydrophobic moment of LAH4-L1 considerably change, and much of the peptide is released from the cargo. Thus, the amphipathic peptide sequences become available to disrupt the endosomal membrane and to assure highly efficient release from this organelle.

Solution and Solid-State Nuclear Magnetic Resonance Structural Investigations of the Antimicrobial Designer Peptide GL13K in Membranes.

The antimicrobial peptide GL13K encompasses 13 amino acid residues and has been designed and optimized from the salivary protein BPIFA2 to exhibit potent bacteriocidal and anti-biofilm activity against Gram-negative and Gram-positive bacteria as well as anti-lipopolysaccharide activity in vitro and in vivo. Here, the peptide was analyzed in a variety of membrane environments by circular dichroism spectroscopy and by high-resolution multidimensional solution nuclear magnetic resonance (NMR) spectroscopy. Whereas in the absence of membranes a random coil conformation predominates, the peptide adopts a helical structure from residue 5 to 11 in the presence of dodecylphosphocholine micelles. In contrast, a predominantly ß-sheet structure was observed in the presence of lipid bilayers carrying negatively charged phospholipids. Whereas 15N solid-state NMR spectra are indicative of a partial alignment of the peptide 15N-1H vector along the membrane surface, 2H and 31P solid-state NMR spectra indicate that in this configuration the peptide exhibits pronounced disordering activities on the phospholipid membrane, which is possibly related to antimicrobial action. GL13K, thus, undergoes a number of conformational transitions, including a random coil state in solution, a helical structure upon dilution at the surface of zwitterionic membranes, and ß-sheet conformations at high peptide:lipid ratios.

Bistable [c2] Daisy Chain Rotaxanes as Reversible Muscle-like Actuators in Mechanically Active Gels.

The implementation of molecular machines in polymer science is of high interest to transfer mechanical motions from nanoscale to macroscale in order to access new kinds of active devices and materials. Toward this objective, thermodynamic and topological aspects need to be explored for reaching efficient systems capable of producing a useful work. In this paper we describe the branched polymerization of pH-sensitive bistable [c2] daisy chain rotaxanes by using copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition ("click chemistry"). With this cross-linked topology, the corresponding materials in the form of chemical gels can be contracted and expanded over a large variation of volume (∼50%) by changing the protonation state of the system. HR-MAS 1H NMR and neutron scattering experiments reveal that this macroscopic response of the gels results from the synchronized actuation of the mechanical bonds at the molecular level.

Viologen-Based Conjugated Covalent Organic Networks via Zincke Reaction.

Morphology influences the functionality of covalent organic networks and determines potential applications. Here, we report for the first time the use of Zincke reaction to fabricate, under either solvothermal or microwave conditions, a viologen-linked covalent organic network in the form of hollow particles or nanosheets. The synthesized materials are stable in acidic, neutral, and basic aqueous solutions. Under basic conditions, the neutral network assumes radical cationic character without decomposing or changing structure. Solvent polarity and heating method determine product morphology. Depending upon solvent polarity, the resulting polymeric network forms either uniform self-templated hollow spheres (HS) or hollow tubes (HT). The spheres develop via an inside-out Ostwald ripening mechanism. Interestingly, microwave conditions and certain solvent polarities result in the formation of a robust covalent organic gel framework (COGF) that is organized in nanosheets stacked several layers thick. In the gel phase, the nanosheets are crystalline and form honeycomb lattices. The use of the Zincke reaction has previously been limited to the synthesis of small viologen molecules and conjugated viologen oligomers. Its application here expands the repertoire of tools for the fabrication of covalent organic networks (which are usually prepared by dynamic covalent chemistry) and for the synthesis of viologen-based materials. All three materials-HT, HS, and COGF-serve as efficient adsorbents of iodine due to the presence of the cationic viologen linker and, in the cases of HT and HS, permanent porosity.

Alamethicin Supramolecular Organization in Lipid Membranes from 19F Solid-State NMR.

Alamethicins (ALMs) are antimicrobial peptides of fungal origin. Their sequences are rich in hydrophobic amino acids and strongly interact with lipid membranes, where they cause a well-defined increase in conductivity. Therefore, the peptides are thought to form transmembrane helical bundles in which the more hydrophilic residues line a water-filled pore. Whereas the peptide has been well characterized in terms of secondary structure, membrane topology, and interactions, much fewer data are available regarding the quaternary arrangement of the helices within lipid bilayers. A new, to our knowledge, fluorine-labeled ALM derivative was prepared and characterized when reconstituted into phospholipid bilayers. As a part of these studies, C19F3-labeled compounds were characterized and calibrated for the first time, to our knowledge, for 19F solid-state NMR distance and oligomerization measurements by centerband-only detection of exchange (CODEX) experiments, which opens up a large range of potential labeling schemes. The 19F-19F CODEX solid-state NMR experiments performed with ALM in POPC lipid bilayers and at peptide/lipid ratios of 1:13 are in excellent agreement with molecular-dynamics calculations of dynamic pentameric assemblies. When the peptide/lipid ratio was lowered to 1:30, ALM was found in the dimeric form, indicating that the supramolecular organization is tuned by equilibria that can be shifted by changes in environmental conditions.

Covalent Tethering and Residues with Bulky Hydrophobic Side Chains Enable Self-Assembly of Distinct Amyloid Structures.

Polymorphism is a common property of amyloid fibers that complicates their detailed structural and functional studies. Here we report experiments illustrating the chemical principles that enable the formation of amyloid polymorphs with distinct stoichiometric composition. Using appropriate covalent tethering we programmed self-assembly of a model peptide corresponding to the [20-41] fragment of human ß2-microglobulin into fibers with either trimeric or dimeric amyloid cores. Using a set of biophysical and biochemical methods we demonstrated their distinct structural, morphological, and templating properties. Furthermore, we showed that supramolecular approaches in which the peptide is modified with bulky substituents can also be applied to modulate the formation of different fiber polymorphs. Such strategies, when applied to disease-related peptides and proteins, will greatly help in the evaluation of the biological properties of structurally distinct amyloids.

High resolution solid state 2D NMR analysis of biomass and biochar.

Solid state NMR methods are required to analyze biomass as a function of its chemical or biological treatment for biofuels, chemicals, or biochar production. The native polymers network in lignocellulosic biomass and other solid materials, such as coal, coke, or biochar, can hardly be analyzed by liquid state NMR due to their poor swelling ability without chemical modification. A (1)H-(13)C two-dimensional heteronuclear correlation (HETCOR) experiment with frequency-switched Lee-Goldburg (FSLG) irradiation is performed on a high field spectrometer (750 MHz). This method leads to previously unattained resolution for biomass and biochar and offers a unique ability to reveal their chemical composition. The formation of aromatic moieties from carbohydrates and lignin thermal conversion is clearly distinguished. This method can be applied to all other carbonaceous materials.

15N chemical shift referencing in solid state NMR.

Solid-state NMR spectroscopy has much advanced during the last decade and provides a multitude of data that can be used for high-resolution structure determination of biomolecules, polymers, inorganic compounds or macromolecules. In some cases the chemical shift referencing has become a limiting factor to the precision of the structure calculations and we have therefore evaluated a number of methods used in proton-decoupled (15)N solid-state NMR spectroscopy. For (13)C solid-state NMR spectroscopy adamantane is generally accepted as an external standard, but to calibrate the (15)N chemical shift scale several standards are in use. As a consequence the published chemical shift values exhibit considerable differences (up to 22 ppm). In this paper we report the (15)N chemical shift of several commonly used references compounds in order to allow for comparison and recalibration of published data and future work. We show that (15)NH4Cl in its powdered form (at 39.3 ppm with respect to liquid NH3) is a suitable external reference as it produces narrow lines when compared to other reference compounds and at the same time allows for the set-up of cross-polarization NMR experiments. The compound is suitable to calibrate magic angle spinning and static NMR experiments. Finally the temperature variation of (15)NH4Cl chemical shift is reported.

Self-assembled viologens on HOPG: solid-state NMR and AFM unravel the location of the anions.

The controlled growth of self-assembled networks on surfaces based on viologen salts is a major scientific challenge due to their unique electronic properties. The combination of solid-state NMR spectroscopy and atomic force microscopy at ambient conditions can unravel the fine organization of the supramolecular network on a graphitic surface by positioning the counter-ions relative to the viologen cation.

Tuning the electrical properties of graphene oxide through low-temperature thermal annealing.

During the last fifteen years, the reduction of electrically insulating graphene oxide (GO) through the elimination of oxygen containing functional groups and the restoration of sp2 conjugation yielding its conducting form, known as reduced graphene oxide (rGO), has been widely investigated as a scalable and low-cost method to produce materials featuring graphene-like characteristics. Among various protocols, thermal annealing represents an attractive green approach compatible with industrial processes. However, the high temperatures typically required to accomplish this process are energetically demanding and are incompatible with the use of plastic substrates often desired for flexible electronics applications. Here, we report a systematic study on the low-temperature annealing of GO by optimizing different annealing conditions, i.e., temperature, time, and reduction atmosphere. We show that the reduction is accompanied by structural changes of GO, which affect its electrochemical performance when used as an electrode material in supercapacitors. We demonstrate that thermally-reduced GO (TrGO) obtained under air or inert atmosphere at relatively low temperatures (<300 °C) exhibits low film resistivities (10-2-10-4 Ω m) combined with unaltered resistance after 2000 bending cycles when supported on plastic substrates. Moreover, it exhibits enhanced electrochemical characteristics with a specific capacitance of 208 F g-1 and a capacitance retention of >99% after 2000 cycles. The reported strategy is an important step forward toward the development of environmentally friendly TrGO for future electrical or electrochemical applications.