Infant milk formulas differ regarding their allergenic activity and induction of T-cell and cytokine responses.

BACKGROUND: Several hydrolyzed cow's milk (CM) formulas are available for avoidance of allergic reactions in CM-allergic children and for prevention of allergy development in high-risk infants. Our aim was to compare CM formulas regarding the presence of immunoreactive CM components, IgE reactivity, allergenic activity, ability to induce T-cell proliferation, and cytokine secretion. METHODS: A blinded analysis of eight CM formulas, one nonhydrolyzed, two partially hydrolyzed (PH), four extensively hydrolyzed (EH), and one amino acid formula, using biochemical techniques and specific antibody probes was conducted. IgE reactivity and allergenic activity of the formulas were tested with sera from CM-allergic patients (n = 26) in RAST-based assays and with rat basophils transfected with the human FcεRI, respectively. The induction of T-cell proliferation and the secretion of cytokines in Peripheral blood mononuclear cell (PBMC) culture from CM allergic patients and nonallergic individuals were assessed. RESULTS: Immune-reactive α-lactalbumin and ß-lactoglobulin were found in the two PH formulas and casein components in one of the EH formulas. One PH formula and the EH formula containing casein components showed remaining IgE reactivity, whereas the other hydrolyzed formulas lacked IgE reactivity. Only two EH formulas and the amino acid formula did not induce T-cell proliferation and proinflammatory cytokine release. The remaining formulas varied regarding the induction of Th2, Th1, and proinflammatory cytokines. CONCLUSION: Our results show that certain CM formulas without allergenic and low proinflammatory properties can be identified and they may also explain different outcomes obtained in clinical studies using CM formulas.

A short-pulse X-ray beamline for spectroscopy and scattering.

Experimental facilities for picosecond X-ray spectroscopy and scattering based on RF deflection of stored electron beams face a series of optical design challenges. Beamlines designed around such a source enable time-resolved diffraction, spectroscopy and imaging studies in chemical, condensed matter and nanoscale materials science using few-picosecond-duration pulses possessing the stability, high repetition rate and spectral range of synchrotron light sources. The RF-deflected chirped electron beam produces a vertical fan of undulator radiation with a correlation between angle and time. The duration of the X-ray pulses delivered to experiments is selected by a vertical aperture. In addition to the radiation at the fundamental photon energy in the central cone, the undulator also emits the same photon energy in concentric rings around the central cone, which can potentially compromise the time resolution of experiments. A detailed analysis of this issue is presented for the proposed SPXSS beamline for the Advanced Photon Source. An optical design that minimizes the effects of off-axis radiation in lengthening the duration of pulses and provides variable X-ray pulse duration between 2.4 and 16 ps is presented.

Design of an ultrahigh-energy-resolution and wide-energy-range soft X-ray beamline.

A new ultrahigh-energy-resolution and wide-energy-range soft X-ray beamline has been designed and is under construction at the Shanghai Synchrotron Radiation Facility. The beamline has two branches: one dedicated to angle-resolved photoemission spectroscopy (ARPES) and the other to photoelectron emission microscopy (PEEM). The two branches share the same plane-grating monochromator, which is equipped with four variable-line-spacing gratings and covers the 20-2000 eV energy range. Two elliptically polarized undulators are employed to provide photons with variable polarization, linear in every inclination and circular. The expected energy resolution is approximately 10 meV at 1000 eV with a flux of more than 3 × 10(10) photons s(-1) at the ARPES sample positions. The refocusing of both branches is based on Kirkpatrick-Baez pairs. The expected spot sizes when using a 10 µm exit slit are 15 µm × 5 µm (horizontal × vertical FWHM) at the ARPES station and 10 µm × 5 µm (horizontal × vertical FWHM) at the PEEM station. The use of plane optical elements upstream of the exit slit, a variable-line-spacing grating and a pre-mirror in the monochromator that allows the influence of the thermal deformation to be eliminated are essential for achieving the ultrahigh-energy resolution.

Electronic screening-enhanced hole pairing in two-leg spin ladders studied by high-resolution resonant inelastic x-ray scattering at Cu M edges.

We study the electronic screening mechanisms of the effective Coulomb on-site repulsion in hole-doped Sr(14)Cu(24)O(41) compared to undoped La(6)Ca(8)Cu(24)O(41) using polarization dependent high-resolution resonant inelastic x-ray scattering at Cu M edges. By measuring the energy of the effective Coulomb on-site repulsion and the spin excitations, we estimate superexchange and hopping matrix element energies along rungs and legs, respectively. Interestingly, hole doping locally screens the Coulomb on-site repulsion reducing it by as much as 25%. We suggest that the increased ratio of the electronic kinetic to the electronic correlation energy contributes to the local superexchange mediated pairing between holes.

Optical design of the Short Pulse Soft X-ray Spectroscopy beamline at the Advanced Photon Source.

The Short Pulse X-ray facility planned for the Advanced Photon Source (APS) upgrade will provide two sectors with photon beams having picosecond pulse duration. The Short Pulse Soft X-ray Spectroscopy (SPSXS) beamline will cover the 150-2000 eV energy range using an APS bending magnet. SPSXS is designed to take full advantage of this new timing capability in addition to providing circular polarized radiation. Since the correlation between time and electron momentum is in the vertical plane, the monochromator disperses in the horizontal plane. The beamline is designed to maximize flux and preserve the time resolution by minimizing the number of optical components. The optical design allows the pulse duration to be varied from 1.5 to 100 ps full width at half-maximum (FWHM) without affecting the energy resolution, and the resolution to be changed with minimal effect on the pulse duration. More than 10(9) photons s(-1) will reach the sample with a resolving power of 2000 and a pulse duration of ∼2 ps for photon energies between 150 and 1750 eV. The spot size expected at the sample position will vary with pulse duration and exit slit opening. At 900 eV and at a resolving power of 2000 the spot will be ∼10 µm × 10 µm with a pulse duration of 2.3 ps FWHM.

Cigarette smoke facilitates allergen penetration across respiratory epithelium.

BACKGROUND: The association between cigarette smoke exposure and allergic airway disease is a matter for debate. We sought to investigate in an in vitro system whether active smoking reduces the integrity and barrier function of the respiratory epithelium and thus facilitates allergen penetration. METHODS: We cultured the human bronchial epithelial cell line 16HBE14o- in a transwell culture system as a surrogate for the intact respiratory epithelium. The cell monolayer was exposed to standardized cigarette smoke extract (CSE). The extent and effects of trans-epithelial allergen penetration were measured using 125I-labelled purified major respiratory allergens (rBet v 1, rPhl p 5 and rDer p 2) and histamine release experiments. RESULTS: Exposure of cells to concentrations of CSE similar to those found in smokers induced the development of para-cellular gaps and a decrease in trans-epithelial resistance. CSE exposure induced a more than threefold increase in allergen penetration. Increased subepithelial allergen concentrations provoked a substantial augmentation of histamine release from sensitized basophils. CONCLUSIONS: Our results indicate that cigarette smoke is a potent factor capable of reducing the barrier function of the respiratory epithelium for allergens and may contribute to increased allergic inflammation, exacerbation of allergic disease and boosting of IgE memory.

Higher immunoglobulin E antibody levels to recombinant Fel d 1 in cat-allergic children with asthma compared with rhinoconjunctivitis.

BACKGROUND: Current diagnosis of allergy and asthma to cat is confirmed using cat dander extract (CDE). We have previously engineered a recombinant major cat allergen, rFel d 1, with properties identical to the natural molecule. OBJECTIVE: The aim of the study was to evaluate IgE and IgG4 antibodies to rFel d 1 among sera from cat-allergic children and adults suffering from asthma and/or rhinoconjunctivitis (RC) in populations from Sweden and Austria. METHODS: Cat-allergic children and adults from Sweden (n=27 and 31, respectively) and Austria (n=41 and 41) with RC and/or asthma were selected. Sera were tested for IgE and IgG4 antibodies to CDE and rFel d 1 by CAP, and IgE to rFel d 1 by ELISA. Healthy subjects and non-cat-allergic patients (n=75) were included as controls. RESULTS: There was a high correlation between IgE responses to rFel d 1 and CDE among the 140 patients (r(s)=0.85, P<0.001); however, measured levels to rFel d 1 were on average 30% higher (P<0.0001). Ninety-eight percent of patients and none of the controls showed IgE to rFel d 1 and there was a threefold increased risk of asthma for half of the children with the highest IgE levels [odds ratio 3.23; 95% confidence interval (CI), 1.19-8.79] by ELISA. IgE responses to rFel d 1 among children with asthma were higher (median 19.4 kU/L) compared with children with RC (median 6.6 kU/L, P<0.05) and adults with asthma (median 3.0 kU/L, P<0.01). Furthermore, children with asthma displayed higher IgG4 levels than the asthmatic adults. CONCLUSION: A single recombinant molecule, rFel d 1, is at least as sensitive for in vitro diagnostics of cat allergy as the current extract-based test. Elevated IgE antibody levels to Fel d 1 are suggested to be a risk factor for asthma in cat-allergic children.

Commissioning and performance of the variable line spacing plane grating monochromator beamline at the Canadian Light Source.

The variable line spacing plane grating monochromator beamline at the Canadian Light Source (CLS) employs three grazing incidence variable line spacing gratings to cover a photon energy range of 5-250 eV. It uses a 185 mm period length planar permanent magnet insertion device as the photon source, sharing a straight section with another soft x-ray beamline at the CLS. The commissioning and performance of the beamline is reported. The high resolution photoabsorption spectra of Ar and PF(5) gases are reported. A resolving power of over 40,000 for photons in the low energy region and >10,000 for a wider energy range (8-200 eV) can be achieved. A photon flux of up to 2 x 10(12) photons/s per 100 mA with slit settings of 50 microm has been measured.

A new compact soft x-ray spectrometer for resonant inelastic x-ray scattering studies at PETRA III.

We present a newly designed compact grating spectrometer for the energy range from 210 eV to 1250 eV, which would include the Kα(1,2) emission lines of vital elements like C, N, and O. The spectrometer is based on a grazing incidence spherical varied line spacing grating with 2400 l/mm at its center and a radius of curvature of 58 542 mm. First, results show a resolving power of around 1000 at an energy of 550 eV and a working spectrometer for high vacuum (10(-4) mbar) environment without losing photon intensity.

The effectiveness of cut-proof glove liners: cut and puncture resistance, dexterity, and sensibility.

Five types of commercial glove liners (within double latex gloves) were compared to single and double latex gloves for cut and puncture resistance and for relative manual dexterity and degree of sensibility. An apparatus was constructed to test glove-pseudofinger constructs in either a cutting or puncture mode. Cutting forces, cutting speed, and type of blade (serrated or scalpel blade) were varied and the time to cut-through measured by an electrical conductivity circuit. Penetration forces were similarly determined with a scalpel blade and a suture needle using a spring scale loading apparatus. Dexterity was measured with an object placement task among a group of orthopedic surgeons. Sensibility was assessed with Semmes-Weinstein monofilaments, two-point discrimination, and vibrametry using standard techniques and rating scales. A subjective evaluation was performed at the end of testing. Time to cut-through for the liners ranged from 2 to 30 seconds for a rapid oscillating scalpel and 4 to 40 seconds for a rapid oscillating serrated knife under minimal loads. When a 1 kg load was added, times to cut-through ranged from 0.4 to 1.0 second. In most cases, the liners were superior to double latex. On average, 100% more force was required to penetrate the liners with a scalpel and 50% more force was required to penetrate the liners with a suture needle compared to double latex. Object placement task times were not significantly liners compared to double latex gloves. Semmes-Weinstein monofilaments, two-point discrimination, and vibrametry showed no difference in sensibility among the various liners and double latex gloves. Subjects felt that the liners were minimally to moderately impairing. An acclimation period may be required for their effective use.

Optical design of the short pulse x-ray imaging and microscopy time-angle correlated diffraction beamline at the Advanced Photon Source.

The short pulse x-ray imaging and microscopy beamline is one of the two x-ray beamlines that will take full advantage of the short pulse x-ray source in the Advanced Photon Source (APS) upgrade. A horizontally diffracting double crystal monochromator which includes a sagittally focusing second crystal will collect most of the photons generated when the chirped electron beam traverses the undulator. A Kirkpatrick-Baez mirror system after the monochromator will deliver to the sample a beam which has an approximately linear correlation between time and vertical beam angle. The correlation at the sample position has a slope of 0.052 ps/µrad extending over an angular range of 800 µrad for a cavity deflection voltage of 2 MV. The expected time resolution of the whole system is 2.6 ps. The total flux expected at the sample position at 10 keV with a 0.9 eV energy resolution is 5.7 × 10(12) photons/s at a spot having horizontal and vertical full width at half maximum of 33 µm horizontal by 14 µm vertical. This new beamline will enable novel time-dispersed diffraction experiments on small samples using the full repetition rate of the APS.

The electron spectro-microscopy beamline at National Synchrotron Light Source II: a wide photon energy range, micro-focusing beamline for photoelectron spectro-microscopies.

A comprehensive optical design for a high-resolution, high-flux, wide-energy range, micro-focused beamline working in the vacuum ultraviolet and soft x-ray photon energy range is proposed. The beamline is to provide monochromatic radiation to three photoelectron microscopes: a full-field x-ray photoelectron emission microscope and two scanning instruments, one dedicated to angle resolved photoemission spectroscopy (µ-ARPES) and one for ambient pressure x-ray photoelectron spectroscopy and scanning photoelectron microscopy (AP-XPS/SPEM). Microfocusing is achieved with state of the art elliptical cylinders, obtaining a spot size of 1 µm for ARPES and 0.5 µm for AP-XPS/SPEM. A detailed ray tracing analysis quantitatively evaluates the overall beamline performances.