Effects of Side-Chain Length and Functionality on Polar Poly(dioxythiophene)s for Saline-Based Organic Electrochemical Transistors.

Understanding the impact of side chains on the aqueous redox properties of conjugated polymers is crucial to unlocking their potential in bioelectrochemical devices, such as organic electrochemical transistors (OECTs). Here, we report a series of polar propylenedioxythiophene-based copolymers functionalized with glyme side chains of varying lengths as well as an analogue with short hydroxyl side chains. We show that long polar side chains are not required for achieving high volumetric capacitance (C*), as short hydroxy substituents can afford facile doping and high C* in saline-based electrolytes. Furthermore, we demonstrate that varying the length of the polar glyme chains leads to subtle changes in material properties. Increasing the length of glyme side chain is generally associated with an enhancement in OECT performance, doping kinetics, and stability, with the polymer bearing the longest side chains exhibiting the highest performance ([µC*]OECT = 200 ± 8 F cm-1 V-1 s-1). The origin of this performance enhancement is investigated in different device configurations using in situ techniques (e.g., time-resolved spectroelectrochemistry and chronoamperometry). These studies suggest that the performance improvement is not due to significant changes in C* but rather due to variations in the inferred mobility. Through a thorough comparison of two different architectures, we demonstrate that device geometry can obfuscate the benchmarking of OECT active channel materials, likely due to contact resistance effects. By complementing all electrochemical and spectroscopic experiments with in situ measurements performed within a planar OECT device configuration, this work seeks to unambiguously assign material design principles to fine-tune the properties of poly(dioxythiophene)s relevant for application in OECTs.

Metal-like Charge Transport in PEDOT(OH) Films by Post-processing Side Chain Removal from a Soluble Precursor Polymer.

Herein, a route to produce highly electrically conductive doped hydroxymethyl functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films, termed PEDOT(OH) with metal-like charge transport properties using a fully solution processable precursor polymer is reported. This is achieved via an ester-functionalized PEDOT derivative [PEDOT(EHE)] that is soluble in a range of solvents with excellent film-forming ability. PEDOT(EHE) demonstrates moderate electrical conductivities of 20-60 S cm-1 and hopping-like (i.e., thermally activated) transport when doped with ferric tosylate (FeTos3 ). Upon basic hydrolysis of PEDOT(EHE) films, the electrically insulative side chains are cleaved and washed from the polymer film, leaving a densified film of PEDOT(OH). These films, when optimally doped, reach electrical conductivities of ≈1200 S cm-1 and demonstrate metal-like (i.e., thermally deactivated and band-like) transport properties and high stability at comparable doping levels.

Significant Enhancement of the Electrical Conductivity of Conjugated Polymers by Post-Processing Side Chain Removal.

The processability and electronic properties of conjugated polymers (CPs) have become increasingly important due to the potential of these materials in redox and solid-state devices for a broad range of applications. To solubilize CPs, side chains are needed, but such side chains reduce the relative fraction of electroactive material in the film, potentially obstructing π-π intermolecular interactions, localizing charge carriers, and compromising desirable optoelectronic properties. To reduce the deleterious effects of side chains, we demonstrate that post-processing side chain removal, exemplified here via ester hydrolysis, significantly increases the electrical conductivity of chemically doped CP films. Beginning with a model system consisting of an ester functionalized ProDOT copolymerized with a dimethylProDOT, we used a variety of methods to assess the changes in polymer film volume and morphology upon hydrolysis and resulting active material densification. Via a combination of electrochemistry, X-ray photoelectron spectroscopy, and charge transport models, we demonstrate that this increase in electrical conductivity is not due to an increase in degree of doping but an increase in charge carrier density and reduction in carrier localization that occurs due to side chain removal. With this improved understanding of side chain hydrolysis, we then apply this method to high-performance ProDOT-alt-EDOTx copolymers. After hydrolysis, these ProDOT-alt-EDOTx copolymers yield exceptional electrical conductivities (∼700 S/cm), outperforming all previously reported oligoether-/glycol-based CP systems. Ultimately, this methodology advances the ability to solution process highly electrically conductive CP films.

Social isolation and achievement of students with learning disabilities.

Students with learning disabilities (LDs) experience heightened levels of social isolation, but researchers have not fully explored its various dimensions at school or determined which aspects contribute to educational gaps associated with LDs. Using the National Longitudinal Study of Adolescent to Adult Health, we find that middle and high school students with LDs are more likely to experience most types of isolation. Student with LDs have fewer friends, their friends are less educationally ambitious, they feel more detached and disliked at school, and they are more likely to avoid friendships, though surprisingly not more likely to be actively rejected. Mediation analyses indicate that the aspect of social isolation that contributes most to the LD-gap in high school graduation is one's number of school friends and their educational expectations. Perceptions of social isolation are also consequential, and together these account for nearly one-quarter of the LD-gap in high school graduation, net of past grades.

Charge-Transfer Intermediates in the Electrochemical Doping Mechanism of Conjugated Polymers.

We address the nature of electrochemically induced charged states in conjugated polymers, their evolution as a function of electrochemical potential, and their coupling to their local environment by means of transient absorption and Raman spectroscopies synergistically performed in situ throughout the electrochemical doping process. In particular, we investigate the fundamental mechanism of electrochemical doping in an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymer. The changes embedded in both linear and transient absorption features allow us to identify a precursor electronic state with charge-transfer (CT) character that precedes polaron formation and bulk electronic conductivity. This state is shown to contribute to the ultrafast quenching of both neutral molecular excitations and polarons. Raman spectra relate the electronic transition of this precursor state predominantly to the Cß-Cß stretching mode of the thiophene heterocycle. We characterize the coupling of the CT-like state with primary excitons and electrochemically induced charge-separated states, providing insight into the energetic landscape of a heterogeneous polymer-electrolyte system and demonstrating how such coupling depends on environmental parameters, such as polymer structure, electrolyte composition, and environmental polarity.

Guiding synthetic targets of anodically coloring electrochromes through density functional theory.

Electrochromic devices offer many technological applications, including flexible displays, dimmable mirrors, and energy-efficient windows. Additionally, adsorbing electrochromic molecular assemblies onto mesoporous metal-oxide surfaces facilitates commercial and manufacturing potential (i.e., screen-printing and/or roll-to-roll processing). These systems also demonstrate synthetic versatility, thus making a wide array of colors accessible. In this work, using Time-Dependent Density Functional Theory (TD-DFT), we investigated ten different bi-aryl type molecules of 3,4-ethylendioxythiophene (EDOT) conjugated to various phenyl derivatives as potential anodically coloring electrochromes (ACEs). The non-substituted phenylene, hexylthiol-EDOT-phenyl-phosphonic acid, PA1, was synthesized and characterized as a means of model validity. PA1 absorbs in the UV region in its neutral state and upon oxidation absorbs within the visible, hence showcasing its potential as an ACE chromophore. The properties of PA1 inspired the designs of the other nine structural derivatives where the number and position of methoxy groups on the phenylene were varied. Using our DFT treatment, we assessed the impact of these modifications on the electronic structures, geometries, and excited-state properties. In particular, we examined stabilization intermolecular interactions (S-O and O-H) as they aid in molecule planarization, thus facilitating charge transport properties in devices. Additionally, destabilizing O-O forces were observed, thereby making some chromophores less desirable. A detailed excited state analysis was performed, which linked the simulated UV-Vis spectra to the dominant excited state transitions and their corresponding molecular orbitals. Based on these results, the nine chromophores were ranked ergo providing an ordered list of synthetic targets.

New Design Paradigm for Color Control in Anodically Coloring Electrochromic Molecules.

A new paradigm is established for the design of conjugated anodically coloring electrochromic molecules. It is shown that through crossconjugation the electronic energy levels of the radical cation state may be controllably tuned independent of the neutral state. It is shown how cross-conjugation can be used to tune the radical cation state independent of the neutral state. Manipulating the oscillator strengths of radical cation transitions allows for tuning of the color by shifting the λmax of the low-energy absorption by over 400 nm. The neutral states of these molecules are UV absorbing, providing solutions that are colorless with L*a*b* values of 100, 0, 0. They are oxidized to vibrantly colored radical cations with absorptions that span the visible spectrum, creating green, yellow, and red chromophores. These molecules are then mixed to create transmissive, colorless blends that switch to opaque black solutions.

Natural Mentors, Social Class, and College Success.

Natural mentors provide advice, moral support, and assistance to adolescents who aspire to obtain a postsecondary degree, but past studies of the benefits of having an informal adult mentor have yet to resolve several issues. Our analyses of a national sample of high school graduates test three hypotheses: (H1) natural mentoring increases the odds of college attendance and completion, (H2) guidance and career advice are more important for college success than encouragement or role modeling, and (H3) students from poor and working-class families benefit more from mentoring than students from middle- and upper-class families. Hypotheses 1 and 3 are clearly supported when examining the odds of attending college, while Hypothesis 2 was not supported-encouragement and role modeling boost attendance, not advice or practical help. None of the hypotheses is supported when predicting degree completion among those who matriculated. As natural mentors do not appreciably increase the odds of completing college, we conclude past studies have overstated the postsecondary educational benefits of natural mentors.

Twisted Thiophene-Based Chromophores with Enhanced Intramolecular Charge Transfer for Cooperative Amplification of Third-Order Optical Nonlinearity.

Exploiting synergistic cooperation between multiple sources of optical nonlinearity, we report the design, synthesis, and nonlinear optical properties of a series of electron-rich thiophene-containing donor-acceptor chromophores with condensed π-systems and sterically regulated inter-aryl twist angles. These structures couple two key mechanisms underlying optical nonlinearity, namely, (i) intramolecular charge transfer, greatly enhanced by increased electron density and reduced aromaticity at chromophore thiophene rings and (ii) a twisted chromophore geometry, producing a manifold of close-lying excited states and dipole moment changes between ground and excited states that are nearly twice that of untwisted systems. Spectroscopic, electrochemical, and nonlinear Z-scan measurements, combined with quantum chemical calculations, illuminate relationships between molecular structure and mechanisms of enhancement of the nonlinear refractive index. Experiment and calculations together reveal ground-state structures that are strongly responsive to the solvent polarity, leading to substantial negative solvatochromism (Δλ ≈ 10(2) nm) and prevailing zwitterionic/aromatic structures in the solid state and in polar solvents. Ground-to-excited-state energy gaps below 2.0 eV are obtained in condensed π-systems, with lower energy gaps for twisted versus untwisted systems. The real part of the second hyperpolarizability in the twisted structures is much greater than the imaginary part, with the highest twist angle chromophore giving |Re(γ)/Im(γ)| ≈ 100, making such chromophores very promising for all-optical-switching applications.

Ultrafast dynamics in multifunctional Ru(II)-loaded polymers for solar energy conversion.

The use of sunlight to make chemical fuels (i.e., solar fuels) is an attractive approach in the quest to develop sustainable energy sources. Using nature as a guide, assemblies for artificial photosynthesis will need to perform multiple functions. They will need to be able to harvest light across a broad region of the solar spectrum, transport excited-state energy to charge-separation sites, and then transport and store redox equivalents for use in the catalytic reactions that produce chemical fuels. This multifunctional behavior will require the assimilation of multiple components into a single macromolecular system. A wide variety of different architectures including porphyrin arrays, peptides, dendrimers, and polymers have been explored, with each design posing unique challenges. Polymer assemblies are attractive due to their relative ease of production and facile synthetic modification. However, their disordered nature gives rise to stochastic dynamics not present in more ordered assemblies. The rational design of assemblies requires a detailed understanding of the energy and electron transfer events that follow light absorption, which can occur on time scales ranging from femtoseconds to hundreds of microseconds, necessitating the use of sophisticated techniques. We have used a combination of time-resolved absorption and emission spectroscopies with observation times that span 9 orders of magnitude to follow the excited-state evolution within polymer-based molecular assemblies. We complement experimental observations with molecular dynamics simulations to develop a microscopic view of these dynamics. This Account provides an overview of our work on polymers decorated with pendant Ru(II) chromophores, both in solution and on surfaces. We have examined site-to-site energy transport among the Ru(II) complexes, and in systems incorporating π-conjugated polymers, we have observed ultrafast formation of a long-lived charge-separated state. When attached to TiO2, these assemblies exhibit multifunctional behavior in which photon absorption is followed by energy transport to the surface and electron injection to produce an oxidized metal complex. The oxidizing equivalent is then transferred to the conjugated polymer, giving rise to a long-lived charge-separated state.

Tetracyano isoindigo small molecules and their use in n-channel organic field-effect transistors.

N,N'-Dihexyl-6,6'-dicyanoisoindigo, N,N'-didecyl-5,5',6,6'-tetracyanoisoindigo, N,N'-dihexyl-5,5',6,6'-tetracyanoisoindigo, and N,N'-dihexyl-5,5',6,6'-tetracyanothienoisoindigo have been synthesised in moderate yields by the reaction of corresponding di and tetrabromo species with CuCN, with microwave heating leading to higher yields and fewer side products for the tetrasubstituted species. Di- and tetracyano substitution anodically shifts the molecular reduction potential relative to the unsubstituted cores by ca. 0.4 and 0.8 V, respectively, with the resultant values for the tetracyano derivatives (-0.58 to -0.67 V vs. FeCp2(+/0)) suggesting the possibility of air-stable electron transport. All the synthesised cyano derivatives operate in n-channel OFETs, while the tetrabromothienoisoindigo derivative functions in a p-channel transistor. The tetracyanothienoisoindigo derivative exhibits the highest field-effect electron mobility values - up to 0.04 and 0.09 cm(2) V(-1) s(-1) in spin-coated and inkjet-printed devices respectively - and OFETs incorporating this compound have been shown to operate in air without significant degradation of their mobility values in the saturation regime.

Role of Side-Chain Free Volume on the Electrochemical Behavior of Poly(propylenedioxythiophenes).

Mixed ionic/electronic conducting polymers are versatile systems for, e.g., energy storage, heat management (exploiting electrochromism), and biosensing, all of which require electrochemical doping, i.e., the electrochemical oxidation or reduction of their macromolecular backbones. Electrochemical doping is achieved via electro-injection of charges (i.e., electronic carriers), stabilized via migration of counterions from a supporting electrolyte. Since the choice of the polymer side-chain functionalization influences electrolyte and/or ion sorption and desorption, it in turn affects redox properties, and, thus, electrochemically induced mixed conduction. However, our understanding of how side-chain versus backbone design can increase ion flow while retaining high electronic transport remains limited. Hence, heuristic design approaches have typically been followed. Herein, we consider the redox and swelling behavior of three poly(propylenedioxythiophene) derivatives, P(ProDOT)s, substituted with different side-chain motifs, and demonstrate that passive swelling is controlled by the surface polarity of P(ProDOT) films. In contrast, active swelling under operando conditions (i.e., under an applied bias) is dictated by the local side-chain free volume on the length scale of a monomer unit. Such insights deliver important design criteria toward durable soft electrochemical systems for diverse energy and biosensing platforms and new understanding into electrochemical conditioning ("break-in") in many conducting polymers.

High-Performance Wearable Organic Photodetectors by Molecular Design and Green Solvent Processing for Pulse Oximetry and Photoplethysmography.

White-light detection from the visible to the near-infrared region is central to many applications such as high-speed cameras, autonomous vehicles, and wearable electronics. While organic photodetectors (OPDs) are being developed for such applications, several challenges must be overcome to produce scalable high-detectivity OPDs. This includes issues associated with low responsivity, narrow absorption range, and environmentally friendly device fabrication. Here, an OPD system processed from 2-methyltetrahydrofuran (2-MeTHF) sets a record in light detectivity, which is also comparable with commercially available silicon-based photodiodes is reported. The newly designed OPD is employed in wearable devices to monitor heart rate and blood oxygen saturation using a flexible OPD-based finger pulse oximeter. In achieving this, a framework for a detailed understanding of the structure-processing-property relationship in these OPDs is also developed. The bulk heterojunction (BHJ) thin films processed from 2-MeTHF are characterized at different length scales with advanced techniques. The BHJ morphology exhibits optimal intermixing and phase separation of donor and acceptor moieties, which facilitates the charge generation and collection process. Benefitting from high charge carrier mobilities and a low shunt leakage current, the newly developed OPD exhibits a specific detectivity of above 1012  Jones over 400-900 nm, which is higher than those of reference devices processed from chlorobenzene and ortho-xylene.

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers.

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT-TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H-C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π-π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm-1. More importantly, thermally annealed TPT-TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10-2 cm2 V-1 s-1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Surface-Localized Chemically Modified Reduced Graphene Oxide Nanocomposites as Flexible Conductive Surfaces for Space Applications.

Thermoplastic polymers are a compelling class of materials for emerging space exploration applications due to their wide range of mechanical properties and compatibility with a variety of processing methods, including additive manufacturing. However, despite these benefits, the use of thermoplastic polymers in a set of critical space applications is limited by their low electrical conductivity, which makes them susceptible to static charging and limits their ability to be used as active and passive components in electronic devices, including materials for static charge dissipation, resistive heaters, and electrodynamic dust shielding devices. Herein, we explore the microstructural evolution of electrically conductive, surface-localized nanocomposites (SLNCs) of chemically modified reduced graphene oxide and a set of thermoplastic polymers as a function of critical thermal properties of the substrate (melting temperature for semi-crystalline materials or glass transition temperature for amorphous materials). Selected offsets from critical substrate temperatures were used to produce SLNCs with conductivities between 0.6-3 S/cm and surface structures, which ranged from particle-rich, porous surfaces to polymer-rich, non-porous surfaces. We then demonstrate the physical durability of these electrically conductive SLNCs to expected stress conditions for flexible conductive materials in lunar applications including tension, flexion, and abrasion with lunar simulant. Small changes in resistance (R/R0 < 2) were measured under uniaxial tension up to 20% strain in high density polyethylene and up to 500 abrasion cycles in polysulfone, demonstrating the applicability of these materials as active and passive flexible conductors in exterior lunar applications. The tough, electrically conductive SLNCs developed here could greatly expand the use of polymeric materials in space applications, including lunar exploration, micro- and nano-satellites, and other orbital structures.

Quantifying Charge Carrier Localization in PBTTT Using Thermoelectric and Spectroscopic Techniques.

Chemically doped poly[2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) shows promise for many organic electronic applications, but rationalizing its charge transport properties is challenging because conjugated polymers are inhomogeneous, with convoluted optical and solid-state transport properties. Herein, we use the semilocalized transport (SLoT) model to quantify how the charge transport properties of PBTTT change as a function of iron(III) chloride (FeCl3) doping level. We use the SLoT model to calculate fundamental transport parameters, including the carrier density needed for metal-like electrical conductivities and the position of the Fermi energy level with respect to the transport edge. We then contextualize these parameters with other polymer-dopant systems and previous PBTTT reports. Additionally, we use grazing incidence wide-angle X-ray scattering and spectroscopic ellipsometry techniques to better characterize inhomogeneity in PBTTT. Our analyses indicate that PBTTT obtains high electrical conductivities due to its quickly rising reduced Fermi energy level, and this rise is afforded by its locally high carrier densities in highly ordered microdomains. Ultimately, this report sets a benchmark for comparing transport properties across polymer-dopant-processing systems.

Elucidating Design Rules toward Enhanced Solid-State Charge Transport in Oligoether-Functionalized Dioxythiophene-Based Alternating Copolymers.

This study investigates the solid-state charge transport properties of the oxidized forms of dioxythiophene-based alternating copolymers consisting of an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymerized with different aryl groups, dimethyl ProDOT (DMP), 3,4-ethylenedioxythiophene (EDOT), and 3,4-phenylenedioxythiophene (PheDOT), respectively, to yield copolymers P(OE3)-D, P(OE3)-E, and P(OE3)-Ph. At a dopant concentration of 5 mM FeTos3, the electrical conductivities of these copolymers vary significantly (ranging between 9 and 195 S cm-1) with the EDOT copolymer, P(OE3)-E, achieving the highest electrical conductivity. UV-vis-NIR and X-ray spectroscopies show differences in both susceptibility to oxidative doping and extent of oxidation for the P(OE3) series, with P(OE3)-E being the most doped. Wide-angle X-ray scattering measurements indicate that P(OE3)-E generally demonstrates the lowest paracrystallinity values in the series, as well as relatively small π-π stacking distances. The significant (i.e., order of magnitude) increase in electrical conductivity of doped P(OE3)-E films versus doped P(OE3)-D or P(OE3)-Ph films can therefore be attributed to P(OE3)-E exhibiting both the highest carrier ratios in the P(OE3) series, along with good π-π overlap and local ordering (low paracrystallinity values). Furthermore, these trends in the extent of doping and paracrystallinity are consistent with the reduced Fermi energy level and transport function prefactor parameters calculated using the semilocalized transport (SLoT) model. Observed differences in carrier ratios at the transport edge (ct) and reduced Fermi energies [η(c)] suggest a broader electronic band (better overlap and more delocalization) for the EDOT-incorporating P(OE3)-E polymer relative to P(OE3)-D and P(OE3)-Ph. Ultimately, we rationalize improvements in electrical conductivity due to microstructural and doping enhancements caused by EDOT incorporation, a structure-property relationship worth considering in the future design of highly electrically conductive systems.

Additive-free molecular acceptor organic solar cells processed from a biorenewable solvent approaching 15% efficiency.

We report on the use of molecular acceptors (MAs) and donor polymers processed with a biomass-derived solvent (2-methyltetrahydrofuran, 2-MeTHF) to facilitate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with power conversion efficiency (PCE) approaching 15%. Our approach makes use of two newly designed donor polymers with an opened ring unit in their structures along with three molecular acceptors (MAs) where the backbone and sidechain were engineered to enhance the processability of BHJ OPVs using 2-MeTHF, as evaluated by an analysis of donor-acceptor (D-A) miscibility and interaction parameters. To understand the differences in the PCE values that ranged from 9-15% as a function of composition, the surface, bulk, and interfacial BHJ morphologies were characterized at different length scales using atomic force microscopy, grazing-incidence wide-angle X-ray scattering, resonant soft X-ray scattering, X-ray photoelectron spectroscopy, and 2D solid-state nuclear magnetic resonance spectroscopy. Our results indicate that the favorable D-A intermixing that occurs in the best performing BHJ film with an average domain size of ∼25 nm, high domain purity, uniform distribution and enhanced local packing interactions - facilitates charge generation and extraction while limiting the trap-assisted recombination process in the device, leading to high effective mobility and good performance.

Establishing dual electrogenerated chemiluminescence and multicolor electrochromism in functional ionic transition-metal complexes.

A combination of electrochromism and electroluminescence in functional materials could lead to single-layer dual electrochromic/electroluminescent (EC/EL) display devices, capable of simultaneous operation in emissive and reflective modes. Whereas such next generation displays could provide optimal visibility in any ambient lighting situation, materials available that exhibit such characteristics in the active layer are limited due to the required intrinsic multifunctionality (i.e., redox activity, electroluminescence, electrochromism, and ion conductivity) and to date can only be achieved via the rational design of ionic transition-metal complexes. Reported herein is the synthesis and characterization of a new family of acrylate-containing ruthenium (tris)bipyridine-based coordination complexes with multifunctional characteristics. Potential use of the presented compounds in EC/EL devices is established, as they are applied as cross-linked electrochromic films and electrochemiluminescent layers in light-emitting electrochemical cell devices. Electrochromic switching of the polymeric networks between yellow, orange, green, brown and transmissive states is demonstrated, and electrochemiluminescent devices based on the complexes synthesized show red-orange to deep red emission with λ(max) ranging from 680 to 722 nm and luminance up to 135 cd/m(2). Additionally, a dual EC/EL device prototype is presented where light emission and multicolor electrochromism occur from the same pixel comprised of a single active layer, demonstrating a true combination of these properties in ionic transition-metal complexes.

It takes more than an imine: the role of the central atom on the electron-accepting ability of benzotriazole and benzothiadiazole oligomers.

We report on the comparison of the electronic and photophysical properties of a series of related donor-acceptor-donor oligomers incorporating the previously known 2H-benzo[d][1,2,3]triazole (BTz) moiety as the acceptor and the recently reported BTzTD acceptor, a hybrid of BTz and 2,1,3-benzothiadiazole (BTD). Although often implied in the polymer literature that BTz has good acceptor character, we show that this moiety is best described as a weak acceptor. We present electrochemical, computational, and photophysical evidence supporting our assertion that BTzTD is a strong electron acceptor while maintaining the alkylation ability of the BTz moiety. Our results show that the identity of the central atom (N or S) in the benzo-fused heterocyclic ring plays an important role in both the electron-accepting and the electron-donating ability of acceptor moieties with sulfur imparting a greater electron-accepting ability and nitrogen affording greater electron-donating character. We report on the X-ray crystal structure of a BTzTD trimer, which exhibits greater local aromatic character in the region of the triazole ring and contains an electron-deficient sulfur that imparts strong electron-accepting ability. Additionally, we examine the transient absorption spectra of BTzTD and BTz oligomers and report that the BTz core promotes efficient intersystem crossing to the triplet state, while the presence of the thiadiazole moiety in BTzTD leads to a negligible triplet yield. Additionally, while BTz does not function as a good acceptor, oligomers containing this moiety do function as excellent sensitizers for the generation of singlet oxygen.