Near-Perfect Absorption of Light by Coherent Plasmon-Exciton States.

We experimentally demonstrate and theoretically study the formation of coherent plasmon-exciton states which exhibit absorption of >90% of the incident light (at resonance) and cancellation of absorption. These coherent states result from the interaction between a material supporting an electronic excitation and a plasmonic structure capable of (near) perfect absorption of light. We illustrate the potential implications of these coherent states by measuring the charge separation attainable after photoexcitation. Our study opens the prospect for realizing devices that exploit coherent effects in applications.

Directed Chemical Assembly of Single and Clustered Nanoparticles with Silanized Templates.

The assembly of nanoscale materials into arbitrary, organized structures remains a major challenge in nanotechnology. Herein, we report a general method for creating 2D structures by combining top-down lithography with bottom-up chemical assembly. Under optimal conditions, the assembly of gold nanoparticles was achieved in less than 30 min. Single gold nanoparticles, from 10 to 100 nm, can be placed in predetermined patterns with high fidelity, and higher-order structures can be generated consisting of dimers or trimers. It is shown that the nanoparticle arrays can be transferred to, and embedded within, polymer films. This provides a new method for the large-scale fabrication of nanoparticle arrays onto diverse substrates using wet chemistry.

Optical image processing with metasurface dark modes.

Here we consider image processing using the optical modes of metasurfaces with an angle-dependent excitation. These spatially dispersive modes can be used to directly manipulate the spatial frequency content of an incident field, suggesting their use as ultra-compact alternatives for analog optical information processing. A general framework for describing the filtering process in terms of the optical transfer functions is provided. In the case where the relevant mode cannot be excited with a normally incident plane wave (a dark mode), high-pass filtering is obtained. We provide examples demonstrating filtering of both amplitude and pure phase objects.

Luminescence of a Transition Metal Complex Inside a Metamaterial Nanocavity.

Modification of the local density of optical states using metallic nanostructures leads to enhancement in the number of emitted quanta and photocatalytic turnover of luminescent materials. In this work, the fabrication of a metamaterial is presented that consists of a nanowire separated from a metallic mirror by a polymer thin film doped with a luminescent organometallic iridium(III) complex. The large spin-orbit coupling of the heavy metal atom results in an excited state with significant magnetic-dipole character. The nanostructured architecture supports two distinct optical modes and their assignment achieved with the assistance of numerical simulations. The simulations show that one mode is characterized by strong confinement of the electric field and the other by strong confinement of the magnetic field. These modes elicit drastic changes in the emitter's photophysical properties, including dominant nanocavity-derived modes observable in the emission spectra along with significant increases in emission intensity and the total decay rate. A combination of simulations and momentum-resolved spectroscopy helps explain the mechanism of the different interactions of each optical mode supported by the metamaterial with the excited state of the emitter.

The Plasmonic Pixel: Large Area, Wide Gamut Color Reproduction Using Aluminum Nanostructures.

We demonstrate a new plasmonic pixel (PP) design that produces a full-color optical response over macroscopic dimensions. The pixel design employs arrays of aluminum nanorods "floating" above their Babinet complementary screen, Concepts from conventional cyan magenta yellow key (CMYK) printing techniques and red green blue (RGB) digital displays are integrated with nanophotonic design principles and adapted to the production of PP elements. The fundamental PP color blocks of CMYK are implemented via a composite plasmonic nanoantenna/slot design and then mixed in a digital display analog 3 × 3 array to produce a broad-gamut PP. The PP goes beyond current investigations into plasmonic color production by enabling a broad color gamut and physically large plasmonic color features/devices/images. The use of nanorods also leads to a color response that is polarization tunable. Furthermore, devices are fabricated using aluminum and the fabrication strategy is compatible with inexpensive, rapid-throughput, nanoimprint approaches. Here we quantify, both computationally and experimentally, the performance of the PP. Spectral data from a test palette is obtained and a large area (>1.5 cm lateral dimensions) reproduction of a photograph is generated exemplifying the technqiue.

Photoinduced Electron Transfer in the Strong Coupling Regime: Waveguide-Plasmon Polaritons.

Reversible exchange of photons between a material and an optical cavity can lead to the formation of hybrid light-matter states where material properties such as the work function [ Hutchison et al. Adv. Mater. 2013 , 25 , 2481 - 2485 ], chemical reactivity [ Hutchison et al. Angew. Chem., Int. Ed. 2012 , 51 , 1592 - 1596 ], ultrafast energy relaxation [ Salomon et al. Angew. Chem., Int. Ed. 2009 , 48 , 8748 - 8751 ; Gomez et al. J. Phys. Chem. B 2013 , 117 , 4340 - 4346 ], and electrical conductivity [ Orgiu et al. Nat. Mater. 2015 , 14 , 1123 - 1129 ] of matter differ significantly to those of the same material in the absence of strong interactions with the electromagnetic fields. Here we show that strong light-matter coupling between confined photons on a semiconductor waveguide and localized plasmon resonances on metal nanowires modifies the efficiency of the photoinduced charge-transfer rate of plasmonic derived (hot) electrons into accepting states in the semiconductor material. Ultrafast spectroscopy measurements reveal a strong correlation between the amplitude of the transient signals, attributed to electrons residing in the semiconductor and the hybridization of waveguide and plasmon excitations.

Barriers along the care cascade of HIV-infected men in a large urban center of Brazil.

Global and national HIV/AIDS policies utilize the care cascade to emphasize the importance of continued engagement in HIV services from diagnosis to viral suppression. Several studies have documented barriers that men experience in accessing services at specific stages of care, but few have analyzed how these barriers operate along the care cascade. Brazil offers a unique setting for analyzing barriers to HIV care because it is a middle-income country with a large HIV epidemic and free, universal access to HIV/AIDS services. Semi-structured interviews were conducted in 2011 with HIV-infected men (n = 25) receiving care at the only HIV/AIDS state reference center in Salvador, Brazil, the third largest city in the country. Interviews were transcribed and coded for analysis. Researchers identified barriers to services along the care cascade: health service-related obstacles (poor-quality care, lengthy wait times, and drug supply problems); psychosocial and emotional challenges (fear of disclosure and difficulty accepting HIV diagnosis); indirect costs (transportation and absenteeism at work or school); low perceived risk of HIV; and toxicity and complexity of antiretroviral drug (ARV) regimens. The stages of the care cascade interrupted by each barrier were also identified. Most barriers affected multiple, and often all, stages of care, while toxicity and complexity of ARV regimens was only present at a single care stage. Efforts to eliminate more prevalent barriers have the potential to improve care continuity at multiple stages. Going forward, assessing the relative impact of barriers along one's entire care trajectory can help tailor improvements in service provision, facilitate achievement of viral suppression, and improve access to life-saving testing, treatment, and care.

Optical investigation of the J-pole and Vee antenna families.

The J-pole and Vee RF antenna design families are investigated for their suitability as optical antennas. The modal and spectral properties are experimentally examined to select the most suitable resonant optical plasmonic mode, which is used to inform the optimal positioning of a quantum emitter in relation to the antennas.

Coupling of a single-photon emitter in nanodiamond to surface plasmons of a nanochannel-enclosed silver nanowire.

A finite element method is applied to study the coupling between a nitrogen vacancy (NV) single photon emitter in nanodiamond and surface plasmons in a silver nanowire embedded in an alumina nanochannel template. We investigate the effective parameters in the coupled system and present detailed optimization for the maximum transmitted power at a selected optical frequency (650 nm). The studied parameters include nanowire length, nanowire diameter, distance between the dipole and the nanowire, orientation of the emitter and refractive index of the surrounding. It is found that the diameter of the nanowire has a strong influence on the propagation of the surface plasmon polaritons and emission power from the bottom and top endings of the nanowire.

Contemplating abortion: HIV-positive women's decision to terminate pregnancy.

Research on pregnancy termination largely assumes HIV status is the only reason why HIV-positive women contemplate abortion. As antiretroviral treatment (ART) becomes increasingly available and women are living longer, healthier lives, the time has come to consider the influence of other factors on HIV-positive women's reproductive decision-making. Because ART has been free and universally available to Brazilians for more than two decades, Brazil provides a unique context in which to explore these issues. A total of 25 semi-structured interviews exploring women's pregnancy termination decision-making were conducted with women receiving care at the Reference Centre for HIV/AIDS in Salvador, Brazil. Interviews were transcribed, translated into English and coded for analysis. HIV played different roles in women's decision-making. In all, 13 HIV-positive women did not consider terminating their pregnancy. Influential factors described by those who did consider terminating their pregnancy included fear of HIV transmission, fear of HIV-related stigma, family size, economic constraints, partner and provider influence, as well as lack of access to pregnancy termination services and abortifacients. For some HIV-positive women in Brazil, HIV can be the only reason to consider terminating a pregnancy, but other factors are significant. A thorough understanding of all variables affecting reproductive decision-making is necessary for enhancing services and policies and better meeting the needs and rights of HIV-positive women.

Reconfigurable image processing metasurfaces with phase-change materials.

Optical metasurfaces have enabled analog computing and image processing within sub-wavelength footprints, and with reduced power consumption and faster speeds. While various image processing metasurfaces have been demonstrated, most of the considered devices are static and lack reconfigurability. Yet, the ability to dynamically reconfigure processing operations is key for metasurfaces to be used within practical computing systems. Here, we demonstrate a passive edge-detection metasurface operating in the near-infrared regime whose response can be drastically modified by temperature variations smaller than 10 °C around a CMOS-compatible temperature of 65 °C. Such reconfigurability is achieved by leveraging the insulator-to-metal phase transition of a thin layer of vanadium dioxide, which strongly alters the metasurface nonlocal response. Importantly, this reconfigurability is accompanied by performance metrics-such as numerical aperture, efficiency, isotropy, and polarization-independence - close to optimal, and it is combined with a simple geometry compatible with large-scale manufacturing. Our work paves the way to a new generation of ultra-compact, tunable and passive devices for all-optical computation, with potential applications in augmented reality, remote sensing and bio-medical imaging.

Experimental demonstration of a wave plate utilizing localized plasmonic resonances in nanoapertures.

Here we demonstrate the fabrication and characterization of a plasmonic wave plate. The device uses detuned, orthogonal nanometric apertures that support localized surface plasmon resonances on their interior walls. A device was fabricated in a thin silver film using focused ion beam milling and standard polarization tomography used to determine its Mueller matrix. We demonstrate a device that can convert linearly polarized light to light with an overall degree of polarization of 88% and a degree of circular polarization of 86% at a particular wavelength of 702 nm.

Tunable optical antennas enabled by the phase transition in vanadium dioxide.

Optical antennas, subwavelength metallic structures resonating at visible frequencies, are a relatively new branch of antenna technology being applied in science, technology and medicine. Dynamically tuning the resonances of these antennas would increase their range of application and offer potential increases in plasmonic device efficiencies. Silver nanoantenna arrays were fabricated on a thin film of the phase change material vanadium dioxide (VO(2)) and the resonant wavelength of these arrays was modulated by increasing the temperature of the substrate above the critical temperature (approximately 68 °C). Depending on the array, wavelength modulation of up to 110 nm was observed.

Thin film notch filters as platforms for biological image processing.

Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical cancer cells. This work demonstrates the potential of non-local, non-interferometric approaches to image processing for uses in label-free biological cell imaging and dynamical monitoring.

Atom-scale ptychographic electron diffractive imaging of boron nitride cones.

Ptychographic coherent diffractive imaging (CDI) has been extensively applied using both x rays and electrons. The extension to atomic resolution has been elusive. This Letter demonstrates ptychographic electron diffractive imaging at atomic resolution, permitting identification of structure in a boron nitride helical cone at a resolution of order 1 Å, beyond that of comparative Z-contrast images. A scanning transmission electron microscope is used to create a diverging illumination in a defocused Fresnel CDI geometry, providing a robust strategy leading to a unique solution.

Plasmonic lenses formed by two-dimensional nanometric cross-shaped aperture arrays for Fresnel-region focusing.

We present the experimental demonstration of what are to our knowledge the first two-dimensional planar plasmonic lenses formed by an array of spatially varying cross-shaped apertures in a metallic film for Fresnel-region focusing. The design utilizes localized surface plasmon resonances occurring inside the apertures, accompanied by an aperture geometry dependent phase shift, to achieve the desired spatial phase modulation in the transmitted field. The performance of lenses with different design configurations was evaluated using a confocal scanning optical microscope, and the effects of diffraction on the optical response of these microscale devices are discussed.

Nanophotonics enhanced coverslip for phase imaging in biology.

The ability to visualise transparent objects such as live cells is central to understanding biological processes. Here we experimentally demonstrate a novel nanostructured coverslip that converts phase information to high-contrast intensity images. This compact device enables real-time, all-optical generation of pseudo three-dimensional images of phase objects on transmission. We show that by placing unstained human cancer cells on the device, the internal structure within the cells can be clearly seen. Our research demonstrates the significant potential of nanophotonic devices for integration into compact imaging and medical diagnostic devices. The nanophotonics enhanced coverslip (NEC) enables ultra-compact phase imaging of samples placed directly on top of the device. Visualisation of artificial phase objects and unstained biological cells is demonstrated.

Post-partum transverse sinus thrombosis presenting as acute psychosis.

Whilst cerebral vascular disease and mental illness in the post-partum period are well recognised, their co-existence and the concept of organic psychoses in pregnancy, parturition and the puerperium remains poorly appreciated (Brockington 2006; Brockington Arch Women's Ment Health 10: 177-178, 2007a; Brockington Arch Women's Ment Health 10: 305-306, b). We report a woman who was referred to the Medical team on-call with a mixed presentation of euphoria, mutism and aggressive behaviour but ultimately demonstrated to have a transverse sinus thrombosis and recovered well with anti-coagulation. This serves an important reminder of the implications of a missed medical diagnosis in this high-risk and vulnerable group of patients.

Multilevel nanoimprint lithography with a binary mould for plasmonic colour printing.

Pigment-free colouration based on plasmonic resonances has recently attracted considerable attention for potential in manufacturing and other applications. For plasmonic colour utilizing the metal-insulator-metal (MIM) configuration, the generated colour is not only dependent on the geometry and transverse dimensions, but also to the size of the vertical gap between the metal nanoparticles and the continuous metal film. The complexity of conventional fabrication methods such as electron beam lithography (EBL), however, limits the capacity to control this critical parameter. Here we demonstrate the straightforward production of plasmonic colour via UV-assisted nanoimprint lithography (NIL) with a simple binary mould and demonstrate the ability to control this gap distance in a single print by harnessing the nanofluidic behaviour of the polymer resist through strategic mould design. We show that this provides a further avenue for controlling the colour reflected by the resulting plasmonic pixels as an adjunct to the conventional approach of tailoring the transverse dimensions of the nanostructures. Our experimental results exhibit wide colour coverage of the CIE 1931 XY colour space through careful control of both the length and periodicity and the resulting vertical gap size of the structure during the nanoimprinting process. Furthermore, to show full control over the vertical dimension, we show that a fixed gap size can be produced by introducing complementary microcavities in the vicinity of the nanostructures on the original mould. This demonstrates a simple method for obtaining an additional degree of freedom in NIL not only for structural colouration but also for other industrial applications such as high-density memory, biosensors and manufacturing.

Self-Assembly of Plasmonic Near-Perfect Absorbers of Light: The Effect of Particle Size.

Structures capable of perfect light absorption promise technological advancements in varied applications, including sensing, optoelectronics, and photocatalysis. While it is possible to realize such structures by placing a monolayer of metal nanostructures above a reflecting surface, there remains limited studies on what effect particle size plays on their capacity to absorb light. Here, we fabricate near-perfect absorbers using colloidal Au nanoparticles, via their electrostatic self-assembly on a TiO2 film supported by a gold mirror. This method enables the control of interparticle spacing, thus minimizing reflection to achieve optimal absorption. Slightly altering the nanoparticle size in these structures reveals significant changes in the spectral separation of hybrid optical modes. We rationalize this observation by interpreting data with a coupled-mode theory that provides a thorough basis for creating functional absorbers using complex colloids and outlines the key considerations for achieving a broadened spectral response.