Mechanism for plasmon-generated solvated electrons.

Solvated electrons are powerful reducing agents capable of driving some of the most energetically expensive reduction reactions. Their generation under mild and sustainable conditions remains challenging though. Using near-ultraviolet irradiation under low-intensity one-photon conditions coupled with electrochemical and optical detection, we show that the yield of solvated electrons in water is increased more than 10 times for nanoparticle-decorated electrodes compared to smooth silver electrodes. Based on the simulations of electric fields and hot carrier distributions, we determine that hot electrons generated by plasmons are injected into water to form solvated electrons. Both yield enhancement and hot carrier production spectrally follow the plasmonic near-field. The ability to enhance solvated electron yields in a controlled manner by tailoring nanoparticle plasmons opens up a promising strategy for exploiting solvated electrons in chemical reactions.

Slowed Singlet Exciton Fission Enhances Triplet Exciton Transport in Select Perylenediimide Crystals.

Singlet fission (SF) materials used in light-harvesting devices must not only efficiently produce spin-triplet excitons but also transport them to an energy acceptor. N,N'-Bis(2-phenylethyl)-3,4,9,10-perylenedicarboximide (EP-PDI) is a promising SF chromophore due to its photostability, large extinction coefficient, and high triplet yield, but the energy transport mechanisms in EP-PDI solids are minimally understood. Herein, we use transient absorption microscopy to directly characterize exciton transport in EP-PDI crystals. We find evidence for singlet-mediated transport in which pairs of triplet excitons undergo triplet fusion (TF), producing spin-singlet excitons that rapidly diffuse. This interchange of singlet and triplet excitons shuttles triplets as far as 205 nm within the first 500 ps after photoexcitation. This enhanced transport comes at a cost, however, as it necessitates favoring triplet recombination and thus requires fine-tuning of SF dynamics to balance triplet yields with triplet transport lengths. Through numerical modeling, we predict tuning the ratio of SF and TF rate constants, kSF/kTF, to between 1.9 and 3.8 allows for an optimized triplet transport length (425-563 nm) with minimal loss (7-10%) in triplet yield. Interestingly, by adjusting the size of EP-PDI crystals, we find that we can subtly tune their crystal structure and thereby alter their SF and TF rates. By slowing SF within small EP-PDI crystals, we are able to boost their triplet transport length by ∼20%. Although counterintuitive, our work suggests slowing SF by introducing moderate structural distortions can be preferential when optimizing triplet exciton transport, provided singlet exciton transport is not significantly hindered.

Methylation of Si(111) Modulates Molecular Orientation in Perylenediimide Thin Films.

Singlet fission produces a pair of low-energy spin-triplet excitons from a single high-energy spin-singlet exciton. While this process offers the potential to enhance the efficiency of silicon solar cells by ∼30%, meeting this goal requires overlayer materials that can efficiently transport triplet excitons to an underlying silicon substrate. Herein, we demonstrate that the chemical functionalization of silicon surfaces controls the structure of vapor-deposited thin films of perylenediimide (PDI) dyes, which are prototypical singlet fission materials. Using a combination of atomic force microscopy (AFM) and grazing-incidence wide-angle X-ray scattering (GIWAXS), we find terminating Si(111) with either a thin, polar oxide layer (SiOx) or with hydrophobic methyl groups (Si-CH3) alters the structures of the resulting PDI films. While PDI films grown on SiOx are comprised of small crystalline grains that largely adopt an "edge-on" orientation with respect to the silicon surface, films grown on Si-CH3 contain large grains that prefer to align in a "face-on" manner with respect to the substrate. This "face-on" orientation is expected to enhance exciton transport to silicon. Interestingly, we find that the preferred mode of growth for different PDIs correlates with the space group associated with bulk crystals of these compounds. While PDIs that inhabit a monoclinic (P21/c) space group nucleate films by forming tall and sparse crystalline columns, PDIs that inhabit triclinic (P1̅) space groups afford films comprised of uniform, lamellar PDI domains. The results highlight that silicon surface functionalization profoundly impacts PDI thin film growth, and rational selection of a hydrophobic surface that promotes "face-on" adsorption may improve energy transfer to silicon.

Controlling Symmetry Breaking Charge Transfer in BODIPY Pairs.

Symmetry breaking charge transfer (SBCT) is a process in which a pair of identical chromophores absorb a photon and use its energy to transfer an electron from one chromophore to the other, breaking the symmetry of the chromophore pair. This excited state phenomenon is observed in photosynthetic organisms where it enables efficient formation of separated charges that ultimately catalyze biosynthesis. SBCT has also been proposed as a means for developing photovoltaics and photocatalytic systems that operate with minimal energy loss. It is known that SBCT in both biological and artificial systems is in part made possible by the local environment in which it occurs, which can move to stabilize the asymmetric SBCT state. However, how environmental degrees of freedom act in concert with steric and structural constraints placed on a chromophore pair to dictate its ability to generate long-lived charge pairs via SBCT remain open topics of investigation.In this Account, we compare a broad series of dipyrrin dimers that are linked by distinct bridging groups to discern how the spatial separation and mutual orientation of linked chromophores and the structural flexibility of their linker each impact SBCT efficiency. Across this material set, we observe a general trend that SBCT is accelerated as the spatial separation between dimer chromophores decreases, consistent with the expectation that the electronic coupling between these units varies exponentially with their separation. However, one key observation is that the rate of charge recombination following SBCT was found to slow with decreasing interchromophore separation, rather than speed up. This stems from an enhancement of the dimer's structural rigidity due to increasing steric repulsion as the length of their linker shrinks. This rigidity further inhibits charge recombination in systems where symmetry has already enforced zero HOMO-LUMO overlap. Additionally, for the forward transfer, the active torsion is shown to increase LUMO-LUMO coupling, allowing for faster SBCT within bridging groups.By understanding trends for how rates of SBCT and charge recombination depend on a dimer's internal structure and its environment, we identify design guidelines for creating artificial systems for driving sustained light-induced charge separation. Such systems can find application in solar energy technologies and photocatalytic applications and can serve as a model for light-induced charge separation in biological systems.

Do The Twist: Efficient Heavy-Atom-Free Visible Light Polymerization Facilitated by Spin-Orbit Charge Transfer Inter-system Crossing.

The use of visible light to drive polymerizations with spatiotemporal control offers a mild alternative to contemporary UV-light-based production of soft materials. In this spectral region, photoredox catalysis represents the most efficient polymerization method, yet it relies on the use of heavy-atoms, such as precious metals or toxic halogens. Herein, spin-orbit charge transfer intersystem crossing from boron dipyrromethene (BODIPY) dyads bearing twisted aromatic groups is shown to enable efficient visible light polymerizations in the absence of heavy-atoms. A ≈5-15× increase in polymerization rate and improved photostability was achieved for twisted BODIPYs relative to controls. Furthermore, monomer polarity had a distinct effect on polymerization rate, which was attributed to charge transfer stabilization based on ultrafast transient absorption and phosphorescence spectroscopies. Finally, rapid and high-resolution 3D printing with a green LED was demonstrated using the present photosystem.

Aggregation of Charge Acceptors on Nanocrystal Surfaces Alters Rates of Photoinduced Electron Transfer.

Semiconductor nanocrystals (NCs) interfaced with molecular ligands that function as charge and energy acceptors are an emerging platform for the design of light-harvesting, photon-upconverting, and photocatalytic materials. However, NC systems explored for these applications often feature high concentrations of bound acceptor ligands, which can lead to ligand-ligand interactions that may alter each system's ability to undergo charge and energy transfer. Here, we demonstrate that aggregation of acceptor ligands impacts the rate of photoinduced NC-to-ligand charge transfer between lead(II) sulfide (PbS) NCs and perylenediimide (PDI) electron acceptors. As the concentration of PDI acceptors is increased, we find the average electron transfer rate from PbS to PDI ligands decreases by nearly an order of magnitude. The electron transfer rate slowdown with increasing PDI concentration correlates strongly with the appearance of PDI aggregates in steady-state absorption spectra. Electronic structure calculations and molecular dynamics (MD) simulations suggest PDI aggregation slows the rate of electron transfer by reducing orbital overlap between PbS charge donors and PDI charge acceptors. While we find aggregation slows electron transfer in this system, the computational models we employ predict ligand aggregation could also be used to speed electron transfer by producing delocalized states that exhibit improved NC-molecule electronic coupling and energy alignment with NC conduction band states. Our results demonstrate that ligand aggregation can alter rates of photoinduced electron transfer between NCs and organic acceptor ligands and should be considered when designing hybrid NC:molecule systems for charge separation.

Sensitivity of sum frequency generation experimental conditions to thin film interference effects.

Sum-frequency generation (SFG) spectroscopy has furthered our understanding of the chemical interfaces that guide key processes in biology, catalysis, environmental science, and energy conversion. However, interpreting SFG spectra of systems containing several internal interfaces, such as thin film electronics, electrochemical cells, and biofilms, is challenging as different interfaces within these structures can produce interfering SFG signals. One potential way to address this issue is to carefully select experimental conditions that amplify the SFG signal of an interface of interest over all others. In this report, we investigate a model two-interface system to assess our ability to isolate the SFG signal from each interface. For SFG experiments performed in a reflective geometry, we find that there are few experimental conditions under which the SFG signal originating from either interface can be amplified and isolated from the other. However, by performing several measurements under conditions that alter their interference, we find that we can reconstruct each signal even in cases where the SFG signal from one interface is more than an order of magnitude smaller than its counterpart. The number of spectra needed for this reconstruction varies depending on the signal-to-noise level of the SFG dataset and the degree to which different experiments in a dataset vary in their sensitivity to each interface. Taken together, our work provides general guidelines for designing experimental protocols that can isolate SFG signals stemming from a particular region of interest within complex samples.

Catalyst Halogenation Enables Rapid and Efficient Polymerizations with Visible to Far-Red Light.

The driving of rapid polymerizations with visible to near-infrared light will enable nascent technologies in the emerging fields of bio- and composite-printing. However, current photopolymerization strategies are limited by long reaction times, high light intensities, and/or large catalyst loadings. The improvement of efficiency remains elusive without a comprehensive, mechanistic evaluation of photocatalysis to better understand how composition relates to polymerization metrics. With this objective in mind, a series of methine- and aza-bridged boron dipyrromethene (BODIPY) derivatives were synthesized and systematically characterized to elucidate key structure-property relationships that facilitate efficient photopolymerization driven by visible to far-red light. For both BODIPY scaffolds, halogenation was shown as a general method to increase polymerization rate, quantitatively characterized using a custom real-time infrared spectroscopy setup. Furthermore, a combination of steady-state emission quenching experiments, electronic structure calculations, and ultrafast transient absorption revealed that efficient intersystem crossing to the lowest excited triplet state upon halogenation was a key mechanistic step to achieving rapid photopolymerization reactions. Unprecedented polymerization rates were achieved with extremely low light intensities (<1 mW/cm2) and catalyst loadings (<50 µM), exemplified by reaction completion within 60 s of irradiation using green, red, and far-red light-emitting diodes. Halogenated BODIPY photoredox catalysts were additionally employed to produce complex 3D structures using high-resolution visible light 3D printing, demonstrating the broad utility of these catalysts in additive manufacturing.

Benzannulation through Ruthenium(0)-Catalyzed Transfer Hydrogenative Cycloaddition: Precision Synthesis and Photophysical Characterization of Soluble Diindenoperylenes.

The first application of ruthenium(0)-catalyzed 1,2-dione-diyne [2+2+2] cycloaddition to PAH construction is achieved by the precision synthesis of soluble diindenoperylenes (DIPs), the electronic structures of which were investigated using steady-state absorption and emission, transient absorption, cyclic voltammetry and time-dependent density functional theory.

Low temperature radical initiated hydrosilylation of silicon quantum dots.

The photophysics of silicon quantum dots (QDs) is not well understood despite their potential for many optoelectronic applications. One of the barriers to the study and widespread adoption of Si QDs is the difficulty in functionalizing their surface, to make, for example, a solution-processable electronically-active colloid. While thermal hydrosilylation of Si QDs is widely used, the high temperature typically needed may trigger undesirable side-effects, like uncontrolled polymerization of the terminal alkene. In this contribution, we show that this high-temperature method for installing aromatic and aliphatic ligands on non-thermal plasma-synthesized Si QDs can be replaced with a low-temperature, radical-initiated hydrosilylation method. Materials prepared via this low-temperature route perform similarly to those created via high-temperature thermal hydrosilylation when used in triplet fusion photon upconversion systems, suggesting the utility of low-temperature, radical-initiated methods for creating Si QDs with a range of functional behavior.

Triple Helical Ir(ppy)3 Phenylene Cage Prepared by Diol-Mediated Benzannulation: Synthesis, Resolution, Absolute Stereochemistry and Photophysical Properties.

Cyclometalation of a triple helical N-doped phenylene cage prepared by ruthenium(0)-catalyzed diol-diene benzannulation delivers a chiral, conformationally constrained Ir(ppy)3 analogue. Like the parent complex, fac-Ir(ppy)3 , the iridium-containing PAH-cage is phosphorescent, but displays enhanced resistance to oxygen quenching.

Exciton-Delocalizing Ligands Can Speed Up Energy Migration in Nanocrystal Solids.

Researchers have long sought to use surface ligands to enhance energy migration in nanocrystal solids by decreasing the physical separation between nanocrystals and strengthening their electronic coupling. Exciton-delocalizing ligands, which possess frontier molecular orbitals that strongly mix with nanocrystal band-edge states, are well-suited for this role because they can facilitate carrier-wave function extension beyond the nanocrystal core, reducing barriers for energy transfer. This report details the use of the exciton-delocalizing ligand phenyldithiocarbamate (PDTC) to tune the transport rate and diffusion length of excitons in CdSe nanocrystal solids. A film composed of oleate-terminated CdSe nanocrystals is subjected to a solid-state ligand exchange to replace oleate with PDTC. Exciton migration in the films is subsequently investigated by femtosecond transient absorption. Our experiments indicate that the treatment of nanocrystal films with PDTC leads to rapid (∼400 fs) downhill energy migration (∼80 meV), while no such migration occurs in oleate-capped films. Kinetic Monte Carlo simulations allow us to extract both rates and length scales for exciton diffusion in PDTC-treated films. These simulations reproduce dynamics observed in transient absorption measurements over a range of temperatures and confirm excitons hop via a Miller-Abrahams mechanism. Importantly, our experiments and simulations show PDTC treatment increases the exciton hopping rate to 200 fs, an improvement of 5 orders of magnitude relative to oleate-capped films. This exciton hopping rate stands as one of the fastest determined for CdSe solids. The facile, room-temperature processing and improved transport properties offered by the solid-state exchange of exciton-delocalizing ligands show they offer promise for the construction of strongly coupled nanocrystal arrays.

Helical Rod-like Phenylene Cages via Ruthenium Catalyzed Diol-Diene Benzannulation: A Cord of Three Strands.

p-Bromo-terminated oligo(p-phenylenevinylenes) emanating from a 1,3,5-benzene core are dihydroxylated and subjected to ruthenium catalyzed diol-diene benzannulation to form tripodal oligo(phenylenes). Copper- or nickel-mediated 3-fold reductive biaryl homocoupling delivers a series of triple-stranded phenylene cages of helical rod-like topology bearing 14, 17, and 20 benzene rings.

Singlet Fission Involves an Interplay between Energetic Driving Force and Electronic Coupling in Perylenediimide Films.

Due to its ability to offset thermalization losses in photoharvesting systems, singlet fission has become a topic of research interest. During singlet fission, a high energy spin-singlet state in an organic semiconductor divides its energy to form two lower energy spin-triplet excitations on neighboring chromophores. While key insights into mechanisms leading to singlet fission have been gained recently, developing photostable compounds that undergo quantitative singlet fission remains a key challenge. In this report, we explore triplet exciton production via singlet fission in films of perylenediimides, a class of compounds with a long history of use as industrial dyes and pigments due to their photostability. As singlet fission necessitates electron transfer between neighboring molecules, its rate and yield depend sensitively on their local arrangement. By adding different functional groups at their imide positions, we control how perylenediimides pack in the solid state. We find inducing a long axis displacement of ∼3 Šbetween neighboring perylenediimides gives a maximal triplet production yield of 178% with a fission rate of ∼245 ps despite the presence of an activation barrier of ∼190 meV. These findings disagree with Marcus theory predictions for the optimal perylenediimide geometry for singlet fission, but do agree with Redfield theory calculations that allow singlet fission to occur via a charge transfer-mediated superexchange mechanism. Unfortunately, triplets produced by singlet fission are found to decay over tens of nanoseconds. Our results highlight that singlet fission materials must be designed to not only produce triplet excitons but to also facilitate their extraction.

Surface States Mediate Triplet Energy Transfer in Nanocrystal-Acene Composite Systems.

Hybrid organic:inorganic materials composed of semiconductor nanocrystals functionalized with acene ligands have recently emerged as a promising platform for photon upconversion. Infrared light absorbed by a nanocrystal excites charge carriers that can pass to surface-bound acenes, forming triplet excitons capable of fusing to produce visible radiation. To fully realize this scheme, energy transfer between nanocrystals and acenes must occur with high efficiency, yet the mechanism of this process remains poorly understood. To improve our knowledge of the fundamental steps involved in nanoparticle:acene energy transfer, we used ultrafast transient absorption to investigate excited electronic dynamics of PbS nanocrystals chemically functionalized with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) ligands. We find photoexcitation of PbS does not lead to direct triplet energy transfer to surface-bound TIPS-pentacene molecules but rather to the formation of an intermediate state within 40 ps. This intermediate persists for ∼100 ns before evolving to produce TIPS-pentacene triplet excitons. Analysis of transient absorption lineshapes suggests this intermediate corresponds to charge carriers localized at the PbS nanocrystal surface. This hypothesis is supported by constrained DFT calculations that find a large number of spin-triplet states at PbS NC surfaces. Though some of these states can facilitate triplet transfer, others serve as traps that hinder it. Our results highlight that nanocrystal surfaces play an active role in mediating energy transfer to bound acene ligands and must be considered when optimizing composite NC-based materials for photon upconversion, photocatalysis, and other optoelectronic applications.

Triplet Upconversion under Ambient Conditions Enables Digital Light Processing 3D Printing.

The rapid photochemical conversion of materials from liquid to solid (i.e., curing) has enabled the fabrication of modern plastics used in microelectronics, dentistry, and medicine. However, industrialized photocurables remain restricted to unimolecular bond homolysis reactions (Type I photoinitiations) that are driven by high-energy UV light. This narrow mechanistic scope both challenges the production of high-resolution objects and restricts the materials that can be produced using emergent manufacturing technologies (e.g., 3D printing). Herein we develop a photosystem based on triplet-triplet annihilation upconversion (TTA-UC) that efficiently drives a Type I photocuring process using green light at low power density (<10 mW/cm2) and in the presence of ambient oxygen. This system also exhibits a superlinear dependence of its cure depth on the light exposure intensity, which enhances spatial resolution. This enables for the first-time integration of TTA-UC in an inexpensive, rapid, and high-resolution manufacturing process, digital light processing (DLP) 3D printing. Moreover, relative to traditional Type I and Type II (photoredox) strategies, the present TTA-UC photoinitiation method results in improved cure depth confinement and resin shelf stability. This report provides a user-friendly avenue to utilize TTA-UC in ambient photochemical processes and paves the way toward fabrication of next-generation plastics with improved geometric precision and functionality.

Exploring Configurations of Nanocrystal Ligands Using Machine-Learned Force Fields.

Semiconducting nanocrystals passivated with organic ligands have emerged as a powerful platform for light harvesting, light-driven chemical reactions, and sensing. Due to their complexity and size, little structural information is available from experiments, making these systems challenging to model computationally. Here, we develop a machine-learned force field trained on DFT data and use it to investigate the surface chemistry of a PbS nanocrystal interfaced with acetate ligands. In doing so, we go beyond considering individual local minimum energy geometries and, importantly, circumvent a precarious issue associated with the assumption of a single assigned atomic partial charge for each element in a nanocrystal, independent of its structural position. We demonstrate that the carboxylate ligands passivate the metal-rich surfaces by adopting a very wide range of "tilted-bridge" and "bridge" geometries and investigate the corresponding ligand IR spectrum. This work illustrates the potential of machine-learned force fields to transform computational modeling of these materials.

Efficient photon upconversion enabled by strong coupling between silicon quantum dots and anthracene.

Hybrid structures formed between organic molecules and inorganic quantum dots can accomplish unique photophysical transformations by taking advantage of their disparate properties. The electronic coupling between these materials is typically weak, leading photoexcited charge carriers to spatially localize to the dot or to a molecule at its surface. However, we show that by converting a chemical linker that covalently binds anthracene molecules to silicon quantum dots from a carbon-carbon single bond to a double bond, we access a strong coupling regime where excited carriers spatially delocalize across both anthracene and silicon. By pushing the system to delocalize, we design a photon upconversion system with a higher efficiency (17.2%) and lower threshold intensity (0.5 W cm-2) than that of a corresponding weakly coupled system. Our results show that strong coupling between molecules and nanostructures achieved through targeted linking chemistry provides a complementary route for tailoring properties in materials for light-driven applications.

Structural Disorder at the Edges of Rubrene Crystals Enhances Singlet Fission.

Materials that undergo singlet fission are of interest for their use in light-harvesting, photocatalysis, and quantum information science, but their ability to undergo fission can be sensitive to local variations in molecular packing. Herein we employ transient absorption microscopy, molecular dynamics simulations, and electronic structure calculations to interrogate how structures found at the edges of orthorhombic rubrene crystals impact singlet fission. Within a micrometer-scale spatial region at the edges of rubrene crystals, we find that the rate of singlet fission increases nearly 4-fold. This observation is consistent with formation of a region at crystal edges with reduced order that accelerates singlet fission by disrupting the symmetry found in rubrene's orthorhombic crystal structure. Our work demonstrates that structural distortions of singlet fission materials can be used to control fission in time and in space, potentially offering a means of controlling this process in light harvesting and quantum information applications.

Progress and Prospects in Optical Ultrafast Microscopy in the Visible Spectral Region: Transient Absorption and Two-Dimensional Microscopy.

Ultrafast optical microscopy, generally employed by incorporating ultrafast laser pulses into microscopes, can provide spatially resolved mechanistic insight into scientific problems ranging from hot carrier dynamics to biological imaging. This Review discusses the progress in different ultrafast microscopy techniques, with a focus on transient absorption and two-dimensional microscopy. We review the underlying principles of these techniques and discuss their respective advantages and applicability to different scientific questions. We also examine in detail how instrument parameters such as sensitivity, laser power, and temporal and spatial resolution must be addressed. Finally, we comment on future developments and emerging opportunities in the field of ultrafast microscopy.