Immunogenicity of a combined schedule of 7-valent pneumococcal conjugate vaccine followed by a 23-valent polysaccharide vaccine in adult recipients of heart or lung transplants.

A combined schedule of 7-valent pneumococcal conjugate vaccine (PCV7) followed by 23-valent pneumococcal polysaccharide vaccine (PPV23) was evaluated retrospectively in 26 adult recipients of heart or lung transplants. PCV7 was immunogenic in these patients but there appeared to be no benefit from the additional PPV23 dose.

Results of open heart surgery in Jehovah's Witnesses patients.

AIM: The aim of this paper was to evaluate the results in patients from the religious community of Jehovah's Witnesses (JW) undergoing open heart surgery. METHODS: Between January 1998 and November 2007, 35 patients with a religious background of JW church underwent open heart surgery at the Department of Cardiothoracic Surgery, Medical University of Vienna (Austria). Eighteen patients underwent coronary artery bypass graft (CABG), 11 patients underwent valve surgery and 5 patients underwent combined procedures. One patient underwent isolated ascending aortic replacement. Five patients undergoing CABG were operated without cardiopulmonary bypass (CBP). RESULTS: Mean baseline hematocrit serum levels were 35.8+/-6.3%. The mean decrease of hematocrit serum levels was 20.0+/-21.1% after surgery. The mean decrease of hematocrit serum levels in patients undergoing CABG without CPB was 12.5+/-5.4% and 12.0+/-20.0% in patients after isolated valve replacement. One patient died during the operation. Four patients died in the postoperative period due to anemia. During follow-up, being 34.6+/-34.8 months to date, no cardiovascular related adverse event has been observed. CONCLUSIONS: The decrease of hematocrit serum levels is significantly characterizing the postoperative period of open heart surgery in JW. In patients undergoing CABG without CPB and in patients undergoing isolated valve replacement, decrease of hematocrit serum levels was lowest. Therefore, these techniques should be considered for first choice when appropriate. Furthermore, highly normal preoperative hematocrit serum levels and a meticulous surgical technique remain the mainstay of therapy in these patients.

Limited bifurcation asymmetry in coronary arterial tree models generated by constrained constructive optimization.

Models of coronary arterial trees are generated by the algorithm of constrained constructive optimization (CCO). In a given perfusion area a binary branching network of straight cylindrical tubes is generated by successively adding terminal segments to the growing structure. In each step the site of connection is chosen according to an optimization target function (total intravascular volume), and in any stage of development the tree fulfills physiologic boundary conditions (constraints involving pressures, flows and bifurcation rules). CCO generates structures which in many aspects resemble real coronary arterial trees, except for very asymmetric bifurcations, occurring when a large branch gives off a tiny terminal segment. In the present work we evaluate an additional constraint within CCO, namely imposing a limit on the asymmetry of bifurcations during the construction process. Model trees are grown with different limits imposed, and the effects on structure are studied both phenomenologically and via statistical descriptors. As the limit to asymmetry is tightened, blood is conveyed to the perfusion sites via detours rather than directly and the comparison with measured data shows that the structure to change from a conveying to a delivering type of function. Simultaneously total intravascular volume, surface and sum of segments' lengths increase. It is shown why and how local bifurcation asymmetry is able to determine the global structure of the optimized arterial tree model. Surprisingly, the pressure profile from inlet to terminals, being a functional characteristic, remains unaffected.

The influence of optimization target selection on the structure of arterial tree models generated by constrained constructive optimization.

The computational method of constrained constructive optimization was used to generate complex arterial model trees by optimization with respect to a target function. Changing the target function also changes the tree structure obtained. For a parameterized family of target functions a series of trees was created, showing visually striking differences in structure that can also be quantified by appropriately chosen numerical indexes. Blood transport path length, pressure profile, and an index for relative segment orientation show clear dependencies on the optimization target, and the nature of changes can be explained on theoretical grounds. The main goal was to display, quantify, and explain the structural changes induced by different optimization target functions.

The branching angles in computer-generated optimized models of arterial trees.

The structure of a complex arterial tree model is generated on the computer using the newly developed method of "constrained constructive optimization." The model tree is grown step by step, at each stage of development fulfilling invariant boundary conditions for pressures and flows. The development of structure is governed by adopting minimum volume inside the vessels as target function. The resulting model tree is analyzed regarding the relations between branching angles and segment radii. Results show good agreement with morphometric measurements on corrosion casts of human coronary arteries reported in the literature.

Blood rheology after cardiac valve replacement with mechanical prostheses or bioprostheses.

Arterial thromboembolism is a serious complication in patients after heart valve replacement. Abnormalities in blood rheology may contribute to this complication. Therefore, the aim of this study was to compare various determinants of blood rheology in patients with substitute heart valves with those in healthy controls; furthermore, differences between patients with mechanical valves and those with bioprostheses should be investigated. The hemorrheologic determinants--fibrinogen, plasma viscosity, red cell aggregation, hematocrit and platelet aggregation--were studied in 92 patients with mechanical bileaflet valves, in 28 patients with bioprostheses and in 29 control subjects; the time since valve replacement was greater than or equal to 9 months. Fibrinogen, plasma viscosity, red cell and spontaneous platelet aggregation were found to be increased in all patients after heart valve replacement compared with normal subjects (fibrinogen: 348 +/- 87 vs 267 +/- 66 mg/dl, p less than 0.01; plasma viscosity: 1.71 +/- 0.1 vs 1.66 +/- 0.1 mPas, p less than 0.05; red cell aggregation: 9.9 +/- 2 vs 7.8 +/- 2 U, p less than 0.01; platelet aggregation: 22 +/- 15 vs 13 +/- 13%, p less than 0.01); among patients, fibrinogen, plasma viscosity and spontaneous platelet aggregation were higher in mechanical valves than in bioprostheses (fibrinogen: 359 +/- 95 vs 314 +/- 41 mg/dl, p less than 0.01; plasma viscosity: 1.72 +/- 0.1 vs 1.68 +/- 0.1 mPas, p less than 0.1; platelet aggregation: 23 +/- 15 vs 16 +/- 11%; p less than 0.05), whereas no difference could be found for red cell aggregation (9.7 +/- 2 vs 10.5 +/- 2%, p greater than 0.05).(ABSTRACT TRUNCATED AT 250 WORDS)

Long-term results of heart valve replacement with the Edwards Duromedics bileaflet prosthesis: a prospective ten-year clinical follow-up.

OBJECTIVE: The Edwards Duromedics valve (Baxter Healthcare Corp., Edwards Division, Santa Ana, Calif.) was designed with a self-irrigating hinge mechanism to reduce thromboembolic complications. After good initial clinical results, distribution was suspended in 1988 after reports of valve fracture after 20,000 valves had been implanted. The manufacturer conducted extensive studies to improve the Edwards Duromedics and reintroduced a modified version, which is available as Edwards Tekna. The purpose of the study was the evaluation of long-term results of the original Edwards Duromedics that might be important for the current version, the Edwards Tekna valve. METHODS: A prospective clinical 10-year follow-up was performed of 508 patients who underwent valve replacement with the Edwards Duromedics valve in the aortic (n = 268), mitral (n = 183), and aortic and mitral (n = 56) position. RESULTS: The perioperative mortality rate was 6.9%; follow-up was 98% complete, comprising 3648 patient-years for a mean follow-up of 86 months (range: 33 to 144 months). The actuarial freedom from complications at the 10-year follow-up and the incidence rate (percent per patient-year) were as follows: late mortality rate, 69.2% +/- 2.4% (3.5% per patient-year); thromboembolism, 90.7% +/- 1.6% (0.96% per patient-year); anticoagulation-related hemorrhage, 87.7% +/- 1.7% (1.34% per patient-year); prosthetic valve endocarditis, 96.7% +/- 0.09% (0.38% per patient-year); valve-related mortality rate, 89.3% +/- 1.6% (1.21% per patient-year); valve failure, 86.2% +/- 1.85% (1.54% per patient-year); and valve-related morbidity and mortality rate, 71.1% +/- 2.3% (3.2% per patient-year). Three leaflet escapes were observed (one lethal, two successful reoperations; 99.1% +/- 0.05% freedom, 0.08% per patient-year). All patients functionally improved (86% in New York Heart Association classes I and II), and incidence of anemia was insignificant. CONCLUSIONS: These results confirm that the Edwards Duromedics valve shows excellent performance concerning thromboembolism, hemolysis, and functional improvement and will serve as a reference for the last version, the Edwards Tekna valve, where comparable long-term data are currently not available.

Gender-related differences in patients undergoing mechanical aortic valve replacement with the CarboMedics valve.

AIM: The aim of this paper was to evaluate gender-related differences in patients undergoing mechanical aortic valve replacement with the CarboMedics valve. METHODS: During a 20 year period, 629 patients (median age 60 years) underwent mechanical aortic valve replacement with the CarboMedics valve. Of these, 215 patients were female (34%). The median follow-up for the entire cohort was 10.2 ± 6.2 years. RESULTS: In-hospital mortality for the entire cohort was 9% (male 7.3% vs. female 11.0%, P=0.005). Cox regression analysis revealed redo-surgery (HR=2.35, CI 1.35-4.08), LVEF<30% (HR=2.31, CI 1.36-3.93), age (HR=1.60, CI 1.27-2.02), as well as female gender (HR=2.07, CI 1.28-3.35) as independent predictors of survival. For male gender LVEF<30% (HR=2.47, CI 1.23-4.93) and age (HR=1.75, CI 1.25-2.43) were independent predictors of survival. For female gender, additional CABG (HR=2.15, CI 1.08-4.28), redo surgery (HR=3.64, CI 1.78-7.46) as well as age (HR=1.48, CI 1.06-2.06) were independent predictors of survival. CONCLUSION: Gender per se is an independent risk factor of survival after mechanical aortic valve replacement. Severely impaired LVEF independently predicts survival in males whereas additional CABG and redo surgery do in females. Age affects survival in both sexes. These findings may serve as a basis for further improving gender related outcome.

Anatomical variability and functional ability of vascular trees modeled by constrained constructive optimization.

The aim of this study was to investigate the extent that functional capability of vascular trees is related to anatomical variability. To these ends we used the method of Constrained Constructive Optimization (CCO) to generate optimized computer models of coronary arterial trees. All these model trees were optimized according to the same principle under equal boundary conditions of pressures and flows. However, by stochastically casting the locations of the terminal segments, different tree structures were generated, each of which conformed to the same boundary conditions. The structural variability of these models was interpreted as the correlate of the anatomical variability found in real arterial trees. The advantage that computer model trees are known in numerical detail was exploited to perform comprehensive and exact classifications of all segments into bifurcation levels, STRAHLER orders and composite vessels, and to compute the area expansion ratio. The unexpected result was that, despite striking visual differences in anatomical structure, the model trees were almost identical with regard to functional performance. We conclude that models optimized on the computer for a given perfusion task show little differences in their morphometric parameters even if they differ considerably regarding the course of the large vessels.

Shear stress distribution in arterial tree models, generated by constrained constructive optimization.

Models of arterial trees are generated by the algorithm of Constrained Constructive Optimization (CCO). Straight cylindrical, binary branching tubes are arranged in an optimized fashion so as to convey blood to the terminal sites of the tree, which are distributed over a predefined area, representing the tissue to be perfused. All terminal segments supply equal flows at a unique terminal pressure, and the radii of parent and daughter segments are related via a bifurcation law. The connective structure and geometry of the model are optimized according to a target function such as total intravascular volume. The shear rate between blood and the vessel walls is computed in each segment and a new method is presented for rescaling a given CCO tree to a desired value of shear rate in the root segment. The effect of viscosity varying with shear rate is evaluated and a new method is presented for rescaling a CCO-tree segment by segment to consistent values of radii and variable viscosity. Shear stress is evaluated for its deviation from being proportional to shear rate and then subjected to various types of analyses. Usually both, shear stress and its variability, are found to be larger in the smaller than in the larger segments of the CCO-model trees. However, it is shown how the shear-stress distribution can be reshuffled between small and large segments when rescaling a CCO tree to obey a different bifurcation law, while its whole geometry remains unchanged and all boundary conditions remain fulfilled. The selection of optimization target is found to drastically affect shear-stress variability within bifurcations, which reaches a distinct minimum if the model is optimized according to intravascular volume. Finally, a rank-analysis of shear stress within each bifurcation shows that only two out of six possible rank patterns actually occur: the parent segment always experiences medium shear stress while minimum shear stress resides mostly in the larger, less frequently in the smaller daughter.

The CarboMedics "top hat" supraannular prosthesis in the small aortic root.

Twenty-three patients, 11 men and 12 women, with a mean age of 64 (range, 34 to 78) underwent aortic valve replacement (AVR) with a CarboMedics "Top Hat" supraannular prosthesis between March 1993 and August 1994. The top hat supraannular prosthesis, a standard bileaflet valve with the cuff transferred to the valve inflow level, allowed implantation of 21-mm, 23-mm, and 25-mm valves, where a standard 19-mm or 21-mm valve would have usually been placed. One patient who had been in preoperative cardiogenic shock died in the perioperative period. Another had an intraoperative cerebral embolism with permanent impairment. Follow-up on 22 of 23 patients over a mean period of 9 months revealed mean Doppler gradients of 18 +/- 6 mmHg, 15 +/- 2.8 mmHg, and 11 mmHg, for the 21-mm, 23-mm, and 25-mm valves, respectively. Functional improvement was noted, with 17 patients in New York Heart Association (NYHA) Class I and 6 in NYHA Class II, postoperatively, compared with 0 in Class I, 9 in Class II, 10 in Class III, and 4 in Class IV, preoperatively. One patient showed reduced postoperative ventricular function with fractional shortening below 25%. Pandiastolic regurgitation intrinsic to the valve graded as slight was noted in all patients. Other postoperative complications included one patient with anticoagulant-related gastrointestinal bleeding and one other with prosthetic valve endocarditis successfully treated with antibiotics. The CarboMedics top hat valve allows a gain in prosthesis size of 2 mm to 4 mm in the aortic position over standard prostheses, resulting in favorable postoperative hemodynamics.

Death-inducing receptors and apoptotic changes in lymphocytes of patients with heart transplant vasculopathy.

The specific role of lymphocyte apoptosis and transplant-associated atherosclerosis is not well understood. The aim of our study was to investigate the impact of T cell apoptotic pathways in patients with heart transplant vasculopathy. Amongst 40 patients with cardiac heart failure class IV who have undergone heart transplantation, 20 recipients with transplant-associated coronary artery disease (TACAD) and 20 with non-TACAD were investigated one year postoperative. Expression of CD95 and CD45RO, and annexin V binding were measured by FACS. Soluble CD95, sCD95 ligand (sCD95L), tumour necrosis factor receptor type 1 (sTNFR1), and histones were measured in the sera by ELISA. The percentage of cells expressing CD3 and CD4 was significantly reduced in TACAD as well as in non-TACAD patients as compared with control volunteers. Interestingly, the proportion of CD19+ (B cells) and CD56+ (NK) cells was increased in TACAD groups (versus non-TACAD; P < 0.01, and P < 0.001, respectively). In contrast to sCD95, the expression of CD95 (APO-1/Fas) and CD45RO (memory T cells), and sCD95L were significantly increased in non-TACAD and TACAD patients. T cell activation via CD95 with consecutive apoptosis was increased in both groups. The concentration of sTNFR1, IL-10 and histones was significantly elevated in sera from TACAD than non-TACAD patients, and in both groups than in healthy controls. These observations indicate that the allograft may induce a pronounced susceptibility of CD4+ T cells to undergo apoptosis and antibody-driven activation-induced cell death. This data may suggest a paradox immune response similar to that seen in patients with autoimmune diseases.