Iron(II) Complexes of P3 -Chain Ligands: Structural Diversity.

Iron(II) complexes containing ligands with a R2 P-P-PR2 unit were synthesized by metathesis reactions. With R=tBu, a mixture of two isomers is formed; in one of them, the terminal phosphorus binds to the Fe center (ylidic structure), while in the other one, the central P atom is linked to Fe. Starting from differently functionalized parent triphosphanes and corresponding functionalized Fe complexes, the ratio of isomers does not change. The outcome of the reaction and therefore the binding modes of the triphosphane ligands in the resulting compounds can be influenced by the size of the substituents. In the case of R=iPr a chelate complex is formed (both terminal P atoms are linked to the Fe center). Applying the mixed-substituted triphosphane, the ylidic structure of the resulting complex is preferred. The new compounds were characterized by NMR spectroscopy in solution and single-crystal X-ray diffraction in solid-state. The synthetic work was supported by DFT calculations.

Surface Layer Modification of Poly(d,l-lactic- co-glycolic acid) Nanoparticles with Targeting Peptide: A Convenient Synthetic Route for Pluronic F127-Tuftsin Conjugate.

Nanoparticles consisting of biodegradable poly(d,l-lactic- co-glycolic acid) (PLGA) are promising carriers for drug molecules to improve the treatment of tuberculosis. Surface modifiers, such as Pluronic F127, are essential for biocompatibility and for the protection against particle aggregation. This study demonstrates a successful approach to conjugate Pluronic F127 coated PLGA nanoparticles with Tuftsin, which has been reported as a macrophage-targeting peptide. Transformation of Pluronic F127 hydroxyl groups-which have limited reactivity-into aldehyde groups provide a convenient way to bind aminooxy-peptide derivatives in a one-step reaction. We have also investigated that this change has no effect on the physicochemical properties of the nanoparticles. Our data showed that coating nanoparticles with Pluronic-Tuftsin conjugate markedly increased the internalization rate and the intracellular activity of the encapsulated drug candidate against Mycobacterium tuberculosis. By employing this approach, a large variety of peptide targeted PLGA nanoparticles can be designed for drug delivery.

A novel pulse scheme for multiple quantum excitation, SFAM to enhance the sensitivity of MQMAS experiments.

The basic MQMAS sequence consists of two hard pulses, one excites the equilibrium population to MQ (Multiple Quantum) coherence, and the other converts back to detectable coherence after some evolution time t1 (Medek et al., 1995). Unfortunately the MQ excitation and conversion processes are very inefficient due to the nonlinear nature of MQ processes. MQ conversion (converting MQ back to detectable coherence) efficiency can significantly be enhanced with DFS (Double Frequency Sweep) or FAM (Fast Amplitude Modulation) type pulses instead of rectangular pulse irradiation (Goldbourt and Madhu, 2002). In contrary to conversion, it is more challenging to enhance MQ excitation in MQMAS experiments, since most methods result in distorted lineshapes (Goldbourt and Madhu, 2002; Lim and Grey, 1998). In the present work MQ excitation of single crystals was studied, and the understanding of the process led to a principle, which was extended to the excitation of powder samples as well. The resulting method was implemented into the MQMAS sequence to enhance MQ excitation of powder samples under MAS condition. The new sequence called SFAM (Shifted Fast Amplitude Modulation) can provide high enhancements at low RF powers (ϵ>4 at νrf=40 kHz) compared to rectangular pulses. Although simulated lineshapes of SFAM predict only minor deviations from ideal lineshapes, experimentally obtained lineshapes along the anisotropic dimension show rather strong distortions. SFAM is relatively simple to optimize, and shows robustness with respect to the miscalibration or inhomogeneity of the RF power as well as to other parameters of the pulse scheme. A good agreement was found between numerically and experimentally optimized parameters.

PIC microcontroller based external fast analog to digital converter to acquire wide-lined solid NMR spectra by BRUKER DRX and Avance-I spectrometers.

Concerning many former liquid or hybrid liquid/solid NMR consoles, the built in Analog-to-Digital Converters (ADCs) are incapable of digitizing the fids at sampling rates in the MHz range. Regarding both strong anisotropic interactions in the solid state and wide chemical shift dispersion nuclei in solution phase such as (195)Pt, (119)Sn, (207)Pb etc., the spectrum range of interest might be in the MHz range. As determining the informative tensor components of anisotropic NMR interactions requires nonlinear fitting over the whole spectrum including the asymptotic baseline, it is prohibited by low sampling rates of the ADCs. Wide spectrum width is also useful in solution NMR, since windowing of wide chemical shift ranges is avoidable. We built an external analog to digital converter with 10 MHz maximal sampling rate, which can work simultaneously with the built in ADC of the spectrometer. The ADC was tested on both Bruker DRX and Avance-I NMR consoles. In addition to the analog channels it only requires three external digital lines of the NMR console. The ADC sends data to PC via USB. The whole process is controlled by software written in JAVA which is implemented under TopSpin.

Amino-Termination of Silicon Carbide Nanoparticles.

Silicon carbide nanoparticles (SiC NPs) are promising inorganic molecular-sized fluorescent biomarkers. It is imperative to develop methods to functionalize SiC NPs for certain biological applications. One possible route is to form amino groups on the surface, which can be readily used to attach target biomolecules. Here, we report direct amino-termination of aqueous SiC NPs. We demonstrate the applicability of the amino-terminated SiC NPs by attaching bovine serum albumin as a model for functionalization. We monitor the optical properties of the SiC NPs in this process and find that the fluorescence intensity is very sensitive to surface termination. Our finding may have implications for a few nanometers sized SiC NPs containing paramagnetic color centers with optically read electron spins.

Fast calculation of DNMR spectra on CUDA-enabled graphics card.

During the past few years, general-purpose graphics processing units (GPGPUs) have become rather popular in the high performance computing community. In this study, we present an implementation of the simulation of dynamic nuclear magnetic resonance (DNMR) spectra. The algorithm is based on the kinetic Monte Carlo method and therefore can benefit from the multithreaded architecture of the GPGPU. By careful optimization of the algorithm a 30-100-fold speed increase could be achieved.

Facile isolation and analysis of sporopollenin exine from bee pollen.

We present facile methods to obtain purified sporopollenin exine capsules, and provide mass balances for classical and novel purification procedures. An ionic liquid, tetrabutyl phosphonium hydroxide turned out to be the most effective in removing the intine wall. The sporopollenin capsules were investigated by fluorescent microscopy, AFM, solid-state NMR and infrared Raman spectroscopy. The latter two methods showed that sunflower and rape exines have different proportions of O-aliphatic and aromatic constituents. Purified exine capsules were coated with functionalized fluorophores. The procedures presented in this paper could contribute to further spread of the applications of this hollow, and chemically highly resistant material.

Structural characterization of gel-derived calcium silicate systems.

The main aim of this study is to synthesize calcium silicate ceramics that exhibit suitable properties to be used for biomedical applications. In the present work, attention was paid to the understanding of processing-structure relationships. A particular effort was made to clarify the identification of Ca-O-Si bonds by means of spectroscopy. The calcium silicate systems were prepared via a sol-gel route, varying the chemical compositions, the catalyst concentration, and the temperature and time of aging and heat treatment. The processes and the phases evolved during the sol-gel procedure were determined. The bond systems were investigated by Fourier transform infrared (FTIR) and (29)Si magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and the aggregate structures by scanning electron microscopy (SEM), small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), and X-ray diffraction (XRD) measurements.

Monte Carlo simulation of DNMR spectra of coupled spin systems.

A new program MC-DNMR is presented for the simulation of dynamic nuclear magnetic resonance spectra. The algorithm is a Monte Carlo type method based on the extension of single spin vector model to coupled spin systems. This extension is explained in detail and the theory is justified by examples. The main advantage of this program is the significantly smaller sizes of matrices than that in programs based on density matrix theory. So spectra of systems can be simulated that was impossible previously.

Effect of phosphorus precursors on the structure of bioactive calcium phosphate silicate systems.

The main aim of this work was to synthesize calcium phosphate silicate bioceramics by a low energy-consuming sol-gel method applying various phosphorous precursors (triethyl phosphate, phosphoric acid, and ammonium hydrogen phosphate). The investigations concentrated on the influence of phosphorous initial compounds on the bond and crystalline structures and the material quality. The application of the alkoxide and inorganic P-precursors results in considerably different textures. The inorganic PO4-containing precursors lead to sol formations. The sol systems can be characterized by a randomly bonded aggregate structure. Monolith gel systems can only be prepared by using TEP. The alkoxide P-precursor more effectively furthers the connection between the phosphorous and silicon tetrahedra than the inorganic phosphate compounds. Over the P-precursors, the catalyst also affects the structure and properties. In the present work, a special attention was paid to identify the POSi bonds in the FTIR and 31P NMR spectra. The bond systems were investigated by FTIR, 31P and 29Si MAS NMR spectroscopies, the morphology by SEM, WAXS, and XRD measurements, and the water solubility of the ceramic systems also was tested.

An alternative solution for computer controlled tuning and matching of existing NMR probes.

Tuning and matching of NMR probes is necessary for many fields of NMR application including temperature dependent NMR, thermoporometry and cryoporometry, or when significantly different types of samples are measured in automation using sample changers. Mismatch of the probe is an especially critical issue in the case of high magnetic fields, polar or ionic solvents, or extreme thermal conditions. Careful tuning is particularly important for quantitative NMR measurements. Manual tuning and matching of the NMR probe is not possible in the case of automated or remotely controlled measurements. Spectrometer manufacturers offer modern probes equipped with automatic tuning/matching mechanics, like Bruker ATM™, suitable for these experiments. The disadvantages of probes with built-in ATM™ are the significantly higher price, and the non-detachable and non-portable construction. Computer controlled tuning and matching is highly desirrable in solid state NMR since no industrial solution has been developed yet for MAS NMR probes. We present an alternative solution for computer controlled tuning and matching of existing Bruker probes. Building costs are significantly lower, since only commercially available components and ICs are used.

Simulation of DNMR spectra using propagator formalism and Monte Carlo method.

A new program-ProMoCS-is presented for the simulation of dynamic nuclear magnetic resonance spectra. Its algorithm is based on the Monte Carlo method as the one of the previously introduced MC-DNMR but the theory of ProMoCS is explained by using the statistical approach of propagator formalism. Our new program is suitable for the calculation of dynamic NMR spectra of spin systems up to 12 1/2 spin nuclei, several conformers and any type of exchange between them. Mutual exchange of coupled spins can be simulated as well. While it keeps the main advantage of the Monte Carlo based method: calculation with significantly smaller matrices as compared with programs based on the simulation of the average density matrix, the maximum number of nuclei is increased significantly. Thus spectra of such systems can be simulated that was impossible previously.

Hardware modification of a 7 mm MAS NMR probe to a single-crystal goniometer.

Tensorial terms of the Hamiltonian can be measured by solid-state single-crystal nuclear magnetic resonance (NMR) spectroscopy which requires a goniometer NMR probehead. Goniometer probes; however, are not standard parts of solid NMR spectrometers and are available only at a much higher price than magic-angle spinning (MAS) probeheads widely used in research. Due to requirements of MAS experiments, modern probeheads are designed for small ceramic rotors, which are 1-4 mm in diameter, to reach very high angular frequencies, so there are several older 7 mm MAS probeheads used rarely todays in NMR laboratories. In this paper, a simple method is presented how to rebuild step-by-step a 7 mm Bruker MAS probehead to be suitable for single-crystal spectroscopy. In the second part (31)P chemical shift tensors of Na(4)P(2)O(7) x 10H(2)O are determined to demonstrate the functionality of the rebuilt probehead.