On the elusive nature of oxygen binding at coordinatively unsaturated 3d transition metal centers in metal-organic frameworks.

Using gas sorption measurements at ambient temperatures and in situ neutron powder diffraction methods, we have studied the interaction strengths and coordination geometries of O2 and N2 near the non-occupied coordination site (open metal site) in the isostructural MOF structures of the CPO-27-M/M-MOF-74 series (with M = Co, Ni, Mn and Cu). Our experimental observations are compared to periodic quantum chemical model calculations. Contrary to recent computational studies, our results, both experimental and theoretical, unequivocally suggest rather weak interactions between the M(ii) coordinatively unsaturated centers and the adsorbate molecules, being mainly dispersive and electrostatic in nature. As a consequence, they exclude significant orbital charge transfer effects that could lead to superoxide/peroxide formation. Calculated binding energies appear in good agreement with the measured isosteric heats of adsorption in the range of 10-20 kJ mol-1. These, relatively weak host-guest interactions, lead to a tilted end-on geometry in all of the investigated M(ii)-guest molecule adducts.

Enhancing Silicon Solar Cell Performance Using a Thin-Film-like Aluminum Nanoparticle Surface Layer.

Solar cells play an increasing role in global electricity production, and it is critical to maximize their conversion efficiency to ensure the highest possible production. The number of photons entering the absorbing layer of the solar cell plays an important role in achieving a high conversion efficiency. Metal nanoparticles supporting localized surface plasmon resonances (LSPRs) have for years been suggested for increasing light in-coupling for solar cell applications. However, most studies have focused on materials exhibiting strong LSPRs, which often come with the drawback of considerable light absorption within the solar spectrum, limiting their applications and widespread use. Recently, aluminum (Al) nanoparticles have gained increasing interest due to their tuneable LSPRs in the ultraviolet and visible regions of the spectrum. In this study, we present an ideal configuration for maximizing light in-coupling into a standard textured crystalline silicon (c-Si) solar cell by determining the optimal Al nanoparticle and anti-reflection coating (ARC) parameters. The best-case parameters increase the number of photons absorbed by up to 3.3%. We give a complete description of the dominating light-matter interaction mechanisms leading to the enhancement and reveal that the increase is due to the nanoparticles optically exhibiting both particle- and thin-film characteristics, which has not been demonstrated in earlier works.

Exploring the interplay between ligand derivatisation and cation type in the assembly of hybrid polyoxometalate Mn-Andersons.

Herein a library of hybrid Mn-Anderson polyoxometalates anions are presented: 1, [(MnMo6 O18 )((OCH2 )3 -C-(CH2 )7 CHCH2 )2 ](3-) ; compound 2, [(MnMo6 O18 )((OCH2 )3 C-NHCH2 C16 H9 )2 ](3-) ; compound 3, [(MnMo6 O18 )((OCH2 )3 C-(CH2 )7 CHCH2 )1 ((OCH2 )3 C-NHCH2 C16 H9 )1 ](3-) ; compound 4, [(MnMo6 O18 )((OCH2 )3 C-NHC(O)CH2 CHCH2 )2 ](3-) and compounds 5-9, [(MnMo6 O18 )((OCH2 )3 C-NHC(O)(CH2 )x CH3 )2 ]), where x = 4, 10, 12, 14, and 18 respectively. The compounds resulting from the cation exchange of the anions 1-9 to give TBA (a) and DMDOA (b) salts, and additionally for compounds 1, 2 and 3, tetraphenylphosphonium (PPh4 ) (c) salts, are explored at the air/water interface using scanning force microscopy, showing a range of architectures including hexagonal structures, nanofibers and other supramolecular forms. Additionally the solid-state structures for compounds 1c, 2c, 4a, 6a, 9a, are presented for the first time and these investigations demonstrate the delicate interplay between the structure of the covalently derivatised hybrid organo-clusters as well as the ion-exchange cation types.

3D-printed devices for continuous-flow organic chemistry.

We present a study in which the versatility of 3D-printing is combined with the processing advantages of flow chemistry for the synthesis of organic compounds. Robust and inexpensive 3D-printed reactionware devices are easily connected using standard fittings resulting in complex, custom-made flow systems, including multiple reactors in a series with in-line, real-time analysis using an ATR-IR flow cell. As a proof of concept, we utilized two types of organic reactions, imine syntheses and imine reductions, to show how different reactor configurations and substrates give different products.

Controllable self-assembly of organic-inorganic amphiphiles containing Dawson polyoxometalate clusters.

An organic-inorganic molecular hybrid containing the Dawson polyoxometalate, ((C(4)H(9))(4)N)(5)H[P(2)V(3)W(15)O(59)(OCH(2))(3)CNHCOC(15)H(31)], was synthesized and its surfactant-like amphiphilic properties, represented by the formation of bilayer vesicles, were studied in polar solvents. The vesicle size decreases with both decreasing hybrid concentration and with increasing polarity of the solvent, independently. The self-assembly behavior of this hybrid can be controlled by introducing different counterions into the acetonitrile solutions. The addition of ZnCl(2) and NaI can cause a gradual decrease and increase of vesicular sizes, respectively. Tetraalkylammonium bromide is found to disassemble the vesicle assemblies. Moreover, the original counterions of the hybrid can be replaced with protons, resulting in pH-dependent formation of vesicles in aqueous solutions. The hybrid surfactant can further form micro-needle structures in aqueous solutions upon addition of Ca(2+) ions.

Assembly of modular asymmetric organic-inorganic polyoxometalate hybrids into anisotropic nanostructures.

Three organic-inorganic hybrid Mn-Anderson polyoxometalates (POMs), with both symmetrical and asymmetrical appended groups, have been synthesized, identified using electrospray mass spectrometry, and isolated using an approach that allows the three AA, BB, and AB compounds to be structurally characterized. Investigation of the self-assembly of the hybrids on hydrophilic surfaces reveals the formation of nanofibres with characteristics that reflect the nature of the substitution of the POM yielding a route to the programmed assembly of anisotropic hybrid nanostructures.

Exploring a series of isostructural dodecanuclear mixed Ni:Co clusters: toward the control of elemental composition using pH and stoichiometry.

The compositional parameter space in the formation of polynuclear clusters is probed in the synthesis of a series of dodecanuclear coordination clusters of Ni(II) and Co(II) with isostructural D(3h)-symmetric frameworks. At the core of their construction are a carbonate template and the directing ligands cis,trans-1,3,5-triaminocyclohexane and acetate at contrasting pH values. The pH and stoichiometric dependence has been mapped, and analysis by electrospray mass spectrometry reveals the cluster cores in solution. In two specific cases, site-specific occupations are eluded to by analysis of the magnetic properties, and we discuss the possibility of controlling the molecular composition of mixed metal polynuclear clusters.

An In-Depth Structural Study of the Carbon Dioxide Adsorption Process in the Porous Metal-Organic Frameworks CPO-27-M.

The CO2 adsorption process in the family of porous metal-organic framework materials CPO-27-M (M=Mg, Mn, Co, Ni, Cu, and Zn) was studied by variable-temperature powder synchrotron X-ray diffraction under isobaric conditions. The Rietveld analysis of the data provided a time-lapse view of the adsorption process on CPO-27-M. The results confirm the temperature-dependent order of occupation of the three adsorption sites in the pores of the CPO-27-M materials. In CPO-27-M (M=Mg, Mn, Co, Ni, and Zn), the adsorption sites are occupied in sequential order, primarily because of the high affinity of CO2 for the open metal sites. CPO-27-Cu deviates from this stepwise mechanism, and the adsorption sites at the metal cation and the second site are occupied in parallel. The temperature dependence of the site occupancy of the individual CO2 adsorption sites derived from the diffraction data is reflected in the shape of the volumetric sorption isotherms. The fast kinetics and high reversibility observed in these experiments support the suitability of these materials for use in temperature- or pressure-swing processes for carbon capture.

Continuous parallel ESI-MS analysis of reactions carried out in a bespoke 3D printed device.

Herein, we present an approach for the rapid, straightforward and economical preparation of a tailored reactor device using three-dimensional (3D) printing, which can be directly linked to a high-resolution electrospray ionisation mass spectrometer (ESI-MS) for real-time, in-line observations. To highlight the potential of the setup, supramolecular coordination chemistry was carried out in the device, with the product of the reactions being recorded continuously and in parallel by ESI-MS. Utilising in-house-programmed computer control, the reactant flow rates and order were carefully controlled and varied, with the changes in the pump inlets being mirrored by the recorded ESI-MS spectra.

Mapping the synthesis of low nuclearity polyoxometalates from octamolybdates to Mn-Anderson clusters.

A comprehensive study of the isomer-independent synthesis of TRIS ((HOCH(2))(3)CNH(2)) Mn-Anderson compounds from Na(2)MoO(4)·2H(2)O, via the corresponding octamolybdate species, is presented. Three octamolybdate salts of [Mo(8)O(26)](4-) in the ß-isomer form, with tetramethylammonium (TMA), tetraethylammonium (TEA) and tetrapropylammonium (TPA) as the counter cation, were synthesised from the sodium molybdate starting material. Fine white powdery products for the three compounds were obtained, which were fully characterised by elemental analysis, TGA, solution and solid state Raman, IR and ESI-MS, revealing a set ratio of Na and organic cations for each of the three compounds; (TMA)(2)Na(2)[Mo(8)O(26)] (1), (TEA)(3)Na(1)[Mo(8)O(26)] (2) and (TPA)(2)Na(2)[Mo(8)O(26)] (3), and the analyses also confirmed that the three compounds all consisted of the octamolybdate in the ß-isomeric form. ESI-MS analyses of 1, 2 and 3 show similar fragmentation for these ß-isomers compared to the previously reported study for the α-isomer ((TBA)(4)[α-Mo(8)O(26)]) (A) in the synthesis of ((TBA)(3)[MnMo(6)O(18)((OCH(2))(3)CNH(2))(2)]) (B), and compounds 1, 2 and 3 were successfully used to synthesise equivalent TRIS Mn-Anderson compounds: (TMA)(3)[MnMo(6)O(18)((OCH(2))(3)CNH(2))(2)] (4), (TEA)(3)[MnMo(6)O(18)((OCH(2))(3)CNH(2))(2)] (5) and (TPA)(2)Na(1)[MnMo(6)O(18)((OCH(2))(3)CNH(2))(2)] (6), as well as Na(3)[MnMo(6)O(18)((OCH(2))(3)CNH(2))(2)] (7). This is the first example where symmetric organically-grafted Mn-Anderson compounds have been synthesised in DMF from anything but the {Mo(8)O(26)} α-isomer.

Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices.

We utilise 3D design and 3D printing techniques to fabricate a number of miniaturised fluidic 'reactionware' devices for chemical syntheses in just a few hours, using inexpensive materials producing reliable and robust reactors. Both two and three inlet reactors could be assembled, as well as one-inlet devices with reactant 'silos' allowing the introduction of reactants during the fabrication process of the device. To demonstrate the utility and versatility of these devices organic (reductive amination and alkylation reactions), inorganic (large polyoxometalate synthesis) and materials (gold nanoparticle synthesis) processes were efficiently carried out in the printed devices.

Smart high-κ nanodielectrics using solid supported polyoxometalate-rich nanostructures.

Utilizing Langmuir-Blodgett deposition and scanning probe microscopy, we have investigated the extent to which cations alter the self-assembly processes of hybrid polyoxometalates (POMs) on surfaces. The well-defined 2D hexagonal nanostructures obtained were extensively characterized and their properties were studied, and this has revealed fascinating dielectric behavior and reversible capacitive properties. The nanostructures are extremely stable under ambient conditions, and yet exhibit fascinating self-patterning upon heating. These findings present POMs as effective smart nanodielectrics and open up a new field for future POM applications.