Highly Active Chromium Complexes Supported by Constrained Schiff-Base Ligands for Cycloaddition of Carbon Dioxide to Epoxides.

Novel constrained Schiff-base ligands (inden) were developed based on the well-known salen ligands. Chromium complexes supported by the constrained inden ligands were successfully synthesized and used as catalysts for the synthesis of cyclic carbonates from epoxides and carbon dioxide (CO2). The catalyst having tert-butyl (tBu) groups as substituents in combination with tetrabutylammonium bromide (TBAB) as a cocatalyst exhibited very high catalytic activity with a turnover frequency of up to 14800 h-1 for the conversion of CO2 and propylene oxide into propylene carbonate exclusively at 100 °C and 300 psi of CO2 under solvent-free conditions. The catalyst was found to be highly active for various epoxide substrates to produce terminal cyclic carbonates in 100% selectivity.

Disposable paper-based electrochemical sensor using thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) for the label-free detection of C-reactive protein.

A paper-based electrochemical sensor is described that is based on the use of thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC-SH) that was self-assembled on a gold nanoparticle-modified screen-printed electrode (SPE). The SPE sensor was used for label-free detection of C-reactive protein (CRP). Gold nanoparticles (AuNPs) were first electrodeposited on the SPCE, followed by the self-assembly of PMPC-SH on gold. The electrochemical response of the modified SPE to CRP was measured by differential pulse voltammetry (DPV). If the CRP on the paper device is contacted with Ca (II) ions, the current (measured by using hexacyanoferrate as the electrochemical probe) decreases. The signal drops in the 5 to 5000 ng·mL-1 CRP concentration range, and the lower detection limit (at 3 SD/slope) is 1.6 ng·mL-1. The use of a PMPC-modified surface also reduces the nonspecific adsorption of proteins. The sensor is not interfered by bilirubin, myoglobin and albumin. It was successfully applied to CRP detection in certified human serum. This sensor is applicable as an attractive protocol for an inexpensive, highly sensitive, and disposable material for electrochemical detection of CRP. Graphical abstract Schematic presentation of highly sensitive and disposable paper-based electrochemical sensor using thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) in the presence of Ca2+ for the label-free C-reactive protein detection. The current was measured by differential pulse voltammetry.

Antifouling Stripes Prepared from Clickable Zwitterionic Copolymers.

In this study, we have fabricated robust patterned surfaces that contain biocompatible and antifouling stripes, which cause microorganisms to consolidate into bare silicon spaces. Copolymers of methacryloyloxyethyl phosphorylcholine (MPC) and a methacrylate-substituted dihydrolipoic acid (DHLA) were spin-coated onto silicon substrates. The MPC units contributed biocompatibility and antifouling properties, and the DHLA units enabled cross-linking and the formation of robust thin films. Photolithography enabled the formation of 200-µm-wide poly(MPC-DHLA) stripped patterns that were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and rhodamine 6G staining. Regardless of the spacing between poly(MPC-DHLA) stripes (10, 50, or 100 µm), Escherichia coli rapidly adhered to the bare silicon gaps that lacked the copolymer, confirming the antifouling nature of MPC. Overall, this work provides a surface modification strategy for generating alternating biofouling and nonfouling surface structures that are potentially applicable for researchers studying cell biology, drug screening, and biosensor technology.

Patterned Poly(acrylic acid) Brushes Containing Gold Nanoparticles for Peptide Detection by Surface-Assisted Laser Desorption/Ionization Mass Spectrometry.

Patterned poly(acrylic acid) (PAA) brushes was successfully generated via photolithography and surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization of acrylic acid as verified by water contact angle measurements and FT-IR analysis. The carboxyl groups of PAA brushes can act as reducing moieties for in situ synthesis of gold nanoparticles (AuNPs), without the use of additional reducing agent. The formation of AuNPs was confirmed by transmission electron microscopy and X-ray photoelectron spectroscopy. The glass surface-modified by PAA brushes and immobilized with AuNPs (AuNPs-PAA) can be used as a substrate for SALDI-MS analysis, which is capable of detecting both small peptides having m/z ≤ 600 (glutathione) and large peptides having m/z ≥ 1000 (bradykinin, ICNKQDCPILE) without the interference from matrix signal suggesting that AuNPs were stably trapped within the PAA brushes and the carboxyl groups of PAA can serve as internal proton source. By employing AuNPs as the capture probe, the AuNPs-PAA substrate can selectively identify thiol-containing peptides from the peptide mixtures with LOD as low as 0.1 and 0.05 nM for glutathione and ICNKQDCPILE, respectively. An ability to selectively detect ICNKQDCPILE in a diluted human serum is also demonstrated. The patterned format together with its high sensitivity and selectivity render this newly developed substrate a potential platform for high-throughput analysis of other biomarkers, especially those with low molecular weight in complex biological samples.

Poly(N-isopropylacrylamide)-stabilized gold nanoparticles in combination with tricationic branched phenylene-ethynylene fluorophore for protein identification.

Gold nanoparticles stabilized by thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM-AuNPs) were prepared by surface grafting of thiol-terminated PNIPAM onto citrate-stabilized AuNPs. The color change of the PNIPAM-AuNPs solution from red to blue-purple without precipitation when the solution was heated to 40 °C, above the lower critical solution temperature (LCST) of PNIPAM, indicated the thermoresponsive property of the synthesized AuNPs. PNIPAM-AuNPs were used to detect proteins by chemical nose approach based on fluorescence quenching of fluorophore by AuNPs. An array-based sensing platform for detection of six proteins, namely bovine serum albumin, lysozyme, fibrinogen, concanavalin A, hemoglobin, holo-transferrin human can be successfully developed from the PNIPAM-AuNPs having different molecular weights (4 and 8 kDa) and conformation (varied heat treatment from 25 to 40 °C) in combination with a tricationic branched phenylene-ethynylene fluorophore. From principal component analysis (PCA) followed by linear discriminant analysis (LDA), 100% accuracy of protein classification using a leave-one-out (LOO) approach can be achieved by using only two types of PNIPAM-AuNPs.

Filter paper grafted with epoxide-based copolymer brushes for activation-free peptide nucleic acid conjugation and its application for colorimetric DNA detection.

Epoxide-bearing filter paper was first prepared by surface-initiated reversible addition-fragmentation chain transfer (RAFT) copolymerization of glycidyl methacrylate (GMA) and poly(ethylene glycol)methacrylate (PEGMA). Without the need for activation step, the capture peptide nucleic acid (PNA) probes carrying a C-terminal lysine modification can be directly immobilized on the surface-grafted poly[glycidyl methacrylate-ran-poly(ethylene glycol)methacrylate] (P(GMA-ran-PEGMA)) through ring-opening of epoxide groups in the GMA repeating units by amino groups in the PNA's structure. The success of P(GMA-ran-PEGMA) grafting on the filter paper and subsequent PNA immobilization was confirmed by fluorescence microscopy, Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy. Colorimetric detection with signal amplification upon DNA hybridization relies on sandwich-hybridization assay employing another biotinylated PNA strand as a reporter probe together with streptavidin-horseradish peroxidase conjugate (SA-HRP) and o-phenylenediamine (OPD) substrate. It was found that increasing ionic strength during the DNA hybridization step by addition of NaCl can increase the signal intensity, which can be visualized by naked eye. The sensing platform showed the best performance in preventing non-specific adsorption from the non-complementary DNA and discriminating between complementary and single-mismatched targets of at least 50 fmol without the requirement for stringent hybridization or washing condition. This superior ability to suppress non-specific adsorption of non-target DNA as well as other non-DNA components may be explained as a result of hydrophilic PEGMA repeating units in the surface-grafted copolymer.