Mandibular movement during speech of two related Latin languages.

OBJECTIVES/HYPOTHESIS: This study assessed the kinesiographic recordings of jaw movements during reading a text in Galician and Spanish language. STUDY DESIGN: Cross-sectional blind study. METHODS: A homogeneous healthy group of 25 normal stomatognathic system and native Galician participants was studied. Frontal and parasagittal plane recordings of the intraborder lateral jaw movements and during reading Galician and Spanish texts were recorded using a calibrated jaw-tracking device, kinesiograph. RESULTS: Although movements were similar in both languages, a greater retrusion of the jaw in the Spanish language was shown; moreover, a tendency exists for a left-side motion envelope in this right-handedness preference sample. CONCLUSIONS: This study supports the hypothesis that speech is controlled by the central nervous system rather than by peripheral factors and that the hemispheric dominance influences the asymmetry of the speech envelope.

Remodeling dental anatomy vs sham therapy for chronic temporomandibular disorders. A placebo-controlled randomized clinical trial.

BACKGROUND: Evidence regarding the etiology or effective treatments for chronic orofacial pain, the majority diagnosed as temporomandibular disorder (TMD), is limited. PURPOSE: To investigate whether occlusal equilibration therapy (ET) and decreasing the (higher) angle of the lateral guidance on the nonworking-side leads to a reduction in chronic TMDs intensity. METHODS: It was conducted a randomized, explanatory, single blind with blinded assessment, placebo-controlled trial with strong protection against bias involving patients with chronic TMDs. Participants were randomly assigned to receive equilibration therapy or sham therapy. ET in this study consisted of minimal invasive occlusal remodeling to obtain balanced occlusion with reduction of the steeper angle of lateral mandibular movement with respect to the Frankfort plane. The primary outcome was a change in the pain intensity score (on a 0-10 point scale, with 0 indicating no pain and 10 the worst possible pain) at month 6. Secondary outcomes include maximum unassisted mouth opening and psychological distress. RESULTS: A total of 77 participants underwent randomization, 39 of whom received ET and 38 sham therapy. The trial was stopped early for efficacy, according to preestablished rules when 67 participants (n = 34, n = 33, respectively) had completed the analysis. At month 6, the mean unadjusted pain intensity score was 2.1 in the ET and 3.6 in the sham therapy group (adjusted mean difference, -1.54; 95% confidence interval [CI] -0.5 to -2.6; P = 0.004; ANCOVA model). The mean increase in maximum unassisted mouth opening (main secondary outcome) was significantly higher in the real therapy group (adjusted mean difference 3.1 mm, 95% CI 0.5-5.7, p = 0.02). CONCLUSION: ET significantly reduced the intensity of facial pain associated with chronic TMDs and increased maximum unassisted mouth opening, as compared with sham therapy, over the course of 6 months. There were no serious adverse events. Funded by the Instituto de Salud Carlos III from the Ministry of Science and Innovation of the Government of Spain and European Regional Development Fund, Grant nº PI11/02507; "una manera de hacer Europa".

Asymmetry of dental or joint anatomy or impaired chewing function contribute to chronic temporomandibular joint disorders.

INTRODUCTION: The etiologies of most chronic temporomandibular joint disorders are unknown. However, an association between habitual chewing on a particular side and chronic temporomandibular joint disorders has been reported. The aim of this study was to investigate the differences between sides (affected vs unaffected) of biodynamic factors (including lateral dental guidance determined by dental anatomy) or condylar path angles (determined by temporomandibular joint morphology) and chewing function (physiological alternate chewing vs single habitual chewing side). The study scope was to investigate possible etiological factors to improve the understanding of temporomandibular joint disorders. The null hypothesis was that no difference would be found between sides that are or are not affected by chronic temporomandibular joint disorders in chewing function or in levels of dental or temporomandibular joint remodeling. METHODS: This cross-sectional, double-blind study involved 24 adults with substantial, chronic, unilateral symptoms diagnosed as temporomandibular joint disorders. Chewing function, temporomandibular joint remodeling (using axiography) and dental anatomy (lateral guidance angles using kinesiography) were assessed. RESULTS: Habitual chewing on one particular side was observed in 17 of 24 participants; significantly more (n=15) chewed on the affected side than on the unaffected side (P=0.002 in a two-tailed Fisher's exact test; risk estimate=4.5; 95% CI 1.326-15.277). The condylar path (CP) angle was steeper on the affected side than on the unaffected side (mean (standard deviation)=50.52° (9.98°) versus 45.50° (7.98°); P=0.002 in a two-tailed t-test). The lateral guidance (LG) angles were flatter on the affected side in all 24 participants. CONCLUSION: Our results suggest that habitual chewing on one side may be associated with increasing condylar path, with flattening lateral guidance angles, and also with chronic temporomandibular joint disorder on the habitual chewing side.

A porous fibrous hyperelastic damage model for human periodontal ligament: Application of a microcomputerized tomography finite element model.

The periodontal ligament (PDL) is a soft biological tissue that connects the tooth with the trabecular bone of the mandible. It plays a key role in load transmission and is primarily responsible for bone resorption and most common periodontal diseases. Although several numerical studies have analysed the biomechanical response of the PDL, most did not consider its porous fibrous structure, and only a few analysed damage to the PDL. This study presents an innovative numerical formulation of a porous fibrous hyperelastic damage material model for the PDL. The model considers two separate softening phenomena: fibre alignment during loading and fibre rupture. The parameters for the material model characterization were fitted using experimental data from the literature. Furthermore, the experimental tests used for characterization were computationally modelled to verify the material parameters. A finite element model of a portion of a human mandible, obtained by microcomputerized tomography, was developed, and the proposed constitutive model was implemented for the PDL. Our results confirm that damage to the PDL may occur mainly because of overpressure of the interstitial fluid, while large forces must be applied to damage the PDL fibrous network. Moreover, this study clarifies some aspects of the relationship between PDL damage and the bone remodelling process.

Muscular activity during isometric incisal biting.

This study attempted to estimate TMJ loading during incisal loading using a custom load-cell device and surface electromyographic (sEMG) recordings of the main jaw closers to assess the outcome correlation. Study participants were 23 healthy volunteers. The incisal loads having submaximal and mean intensity were recorded using a calibrated electronic load cell; simultaneously, surface electromyography (sEMG) of the right and left masseter and temporalis muscles was recorded. Readings of the resting, clenching in maximal and submaximal intercuspal positions and mean (50%) incisal loads were recorded. Clenching sEMG activity was used as a reference for normalization. The mean (SD) submaximal incisal load recorded was 498 (305.78)N, and the mean at 50% of the submaximal load was 268.93 (147.37)N. Mean (SD) sEMG activity during submaximal clenching was 141.23 (87.76)µV, with no significant differences between the four muscles. During submaximal voluntary incisal loading, the normalized mean sEMG activity was 49.99 (34.54)µV %, and 27.17(15.29)µV % during mean (50%) effort. The incisal load was generated mainly by the masseter muscles, as these showed a positive correlation during mean but not during submaximal effort. In the edge-to-edge jaw position, the mean incisal load effort seems to be physiological, but excessive TMJ loads can be expected from chronic or excessive incisal loading. In conclusion, incisal loads require the activity of the masseter muscles, which show a positive correlation between sEMG activity and effective incisal loads during mean, but not during submaximal, effort, and the masseter muscles are dominant over the temporalis muscles during submaximal incisal biting.

Surface raw electromyography has a moderate discriminatory capacity for differentiating between healthy individuals and those with TMD: a diagnostic study.

The use of surface electromyography (sEMG) to identify subjects with chronic temporomandibular disorders (TMD) is controversial. The main objective of this study is to determine the diagnostic accuracy of EMG to differentiate between healthy subjects and those with TMD. This study evaluated 53 individuals with TMD who were referred to the university service and who fulfilled the eligibility criteria during the period of the study. Thirty-eight dental students were also recruited satisfying same eligibility criteria but without TMD. The inclusion criteria were to be fully dentate, have normal occlusion, and be righthanded. The exclusion criteria were periodontal pathology, caries or damaged dental tissues, orthodontic therapy, maxillofacial disease, botulinum A toxin therapy, and psychological disorders. The means of the masseter muscles, right (RM) and left (LM), and temporalis muscles, right (RT) and left (LT), and intraindividual indexes during resting and during clenching were calculated. Raw sEMG activity was used to determine the cutoff points and calculate the diagnostic accuracy of sEMG. The diagnostic accuracy of these variables for a diagnosis of TMD was evaluated by using the Receiver Operating Characteristic (ROC) curve and the area under it (AUC). A new transformed diagnostic variable was obtained by using the Generalized Additive Models (GAM). Optimal cutoff points were obtained where the sensitivity and specificity were similar and by the Youden index. The highest estimated AUC was 0.660 (95% CI 0.605-0.871) corresponding to the rLT variable during rest. When rLT and rACTIVITY (differences divided by sums of temporalis versus masseter muscles) were considered as a linear combination, the AUC increased to 0.742 (95% CI; 0.783-0.934). In conclusion, the raw sEMG evaluation of rest provided moderate sensitivity and specificity to discriminate between healthy individuals and those with TMD. The use of the indexes (mainly assessing the dominance of temporalis over masseter muscles during rest) is strongly recommended to increase the discriminatory capacity of raw sEMG evaluation.

Temporomandibular disorders: the habitual chewing side syndrome.

BACKGROUND: Temporomandibular disorders are the most common cause of chronic orofacial pain, but, except where they occur subsequent to trauma, their cause remains unknown. This cross-sectional study assessed chewing function (habitual chewing side) and the differences of the chewing side and condylar path and lateral anterior guidance angles in participants with chronic unilateral temporomandibular disorder. This is the preliminary report of a randomized trial that aimed to test the effect of a new occlusal adjustment therapy. METHODS: The masticatory function of 21 randomly selected completely dentate participants with chronic temporomandibular disorders (all but one with unilateral symptoms) was assessed by observing them eat almonds, inspecting the lateral horizontal movement of the jaw, with kinesiography, and by means of interview. The condylar path in the sagittal plane and the lateral anterior guidance angles with respect to the Frankfort horizontal plane in the frontal plane were measured on both sides in each individual. RESULTS: Sixteen of 20 participants with unilateral symptoms chewed on the affected side; the concordance (Fisher's exact test, P = .003) and the concordance-symmetry level (Kappa coefficient κ = 0.689; 95% confidence interval [CI], 0.38 to 0.99; P = .002) were significant. The mean condylar path angle was steeper (53.47(10.88) degrees versus 46.16(7.25) degrees; P = .001), and the mean lateral anterior guidance angle was flatter (41.63(13.35) degrees versus 48.32(9.53) degrees P = .036) on the symptomatic side. DISCUSSION: The results of this study support the use of a new term based on etiology, "habitual chewing side syndrome", instead of the nonspecific symptom-based "temporomandibular joint disorders"; this denomination is characterized in adults by a steeper condylar path, flatter lateral anterior guidance, and habitual chewing on the symptomatic side.

Clenching TMJs-loads increases in partial edentates: a 3D finite element study.

GOAL: This study tests the hypothesis of loading-dependence on the temporomandibular joint during clenching on the particular of experimentally partial edentate conditions. METHODOLOGY: A complete and detailed finite element model of the temporomandibular joint (TMJ) was used. The closing movement of the mouth was reproduced by contracting the closing muscles of the masticatory system. Electromyography (EMG) data were taken from 10 healthy, dentulate volunteers, both with and without intraoral appliances. The intraoral appliances served to mimic nine partially edentulate (PE) conditions for each volunteer. The EMG data were fed into the finite element model (FEM) for each condition and the loading of the joint was analyzed. RESULTS: The results obtained show that muscular activity decreases when the contact between teeth disappears. In particular, the numerical results showed that when there is no contact between the posterior teeth an overload of the joints appeared. Moreover, the existence of a unilateral unique molar induced asymmetric overloading in the TMJ disc without posterior contact. CONCLUSIONS: During clenching, a uniform distribution of the dental contact along the maxillar arches prevents the TMJ from overloading. In contrast, severe partial edentation seems to induce overloading of the TMJ with severity depending on the type of contact.

Perno-muñon colado. Parte II: el desafio retaurativo integral, cuando existe enfermedad uclusal severa / Cast post-and-core procedures. Part II: integrated restoration in cases of severe occlusal pathology

La parte I de este artículo mostraba el procedimiento rutinario de elaboración del perno-muñón colado. En este artículo pretendemos ilustrar secuencia¡ e iconográficamente las fases de restauración de dientes severamente destruidos mediante pernos-muñones colados en situaciones complejas. Este es el caso de los dientes que han sufrido mutilación de la corona debido a parafunciones. Las fases se resumen: 1, diagnóstico etiológico de la patología oclusal y evaluación de los dientes remanentes y tejidos de soporte; 2, restauración oclusal transitoria; 3, tratamiento de los pilares existentes (endo, perio, Ortodoncia?) y/o instalación de fijaciones oseointegradas; 4, prótesis definitivas metal/metal-cerámica. Por último, 5, fase de mantenimiento: control oclusal e higiene (AU)