Initial stages of development of the submandibular gland (human embryos at 5.5-8 weeks of development).

The aim of this study was to determine the main stages of submandibular salivary gland development during the embryonic period in humans. In addition, we studied submandibular salivary gland development in rats on embryonic days 14-16 and expression in the submandibular salivary gland region with the monoclonal antibody HNK-1. Serial sections from 25 human embryos with a greatest length ranging from 10 to 31 mm (Carnegie stages 16-23; weeks 5.5-8 of development) and Wistar rats of embryonic days (E) 14-16 were analysed with light microscopy. Five stages of submandibular salivary gland development were identified. The prospective stage (1), between weeks 5.5 and early week 6, is characterized by a thickening of the epithelium of the medial paralingual groove in the floor of the mouth corresponding to the primordium of the submandibular salivary gland parenchyma. At this stage, the primordium of the parasympathetic ganglion lies below the lingual nerve. The primordium of the submandibular salivary gland parenchyma is observed in rats on E14 in the medial paralingual groove with mesenchymal cells, underlying the lingual nerve. These cells are HNK-1-positive, corresponding to the primordium of the parasympathetic ganglion. The bud stage (2), at the end of week 6 in humans and on E15 in rats, is characterized by the proliferation and invagination of the epithelial condensation, surrounded by an important condensation of the mesenchyme. The pseudoglandular stage (3) at week 6.5 is characterized by the beginning of the formation of lobes in the condensed mesenchyme. The canalicular stage (4), between week 7 and 7.5, is characterized by the appearance of a lumen in the proximal part of the submandibular duct. The innervation stage (5) occurs during week 8, with the innervation of the submandibular and interlobular ducts. Nervous branches arriving from the parasympathetic ganglion innervate the glandular parenchyma. Numerous blood vessels are observed nearby. Our results suggest that submandibular salivary gland development requires interactions among epithelium, mesenchyme, parasympathetic ganglion and blood vessels.

The adjunctive effect of rhBMP-2 on the regeneration of peri-implant bone defects after experimental peri-implantitis.

OBJECTIVES: The aim was to evaluate the degree of bone regeneration and re-osseointegration attained when combining a xenogeneic bone replacement graft plus rhBMP-2 and a collagen membrane in ligature-induced peri-implantitis osseous defects in dogs. MATERIAL AND METHODS: Thirty-six implants were placed in a total of 6 Beagle dogs, 3 months after tooth extraction. Once experimental peri-implantitis was induced, defects were randomly allocated into two treatment groups: in the test group guided bone regeneration was applied using de-proteinized bovine bone mineral with 10% collagen soak loaded with rhBMP2 covered with a natural collagen membrane. In the control group, the same scaffold and membrane were used but saline was used to soak the grafting material. After a period of 8 weeks of healing, a submerged environment clinical measurements were taken and histological outcomes were evaluated once the animals were euthanized. Histological bone defect regeneration (BR) was considered as the primary outcome variable, and dog was selected as the unit of analysis. RESULTS: Partial defect resolution was observed in both treatment groups. The histometric analysis showed a higher degree of bone regeneration for the test group, although differences were not statistically significant, both in terms of histological bone gain and percentage of re-osseointegration. CONCLUSIONS: (a) The addition of rhBMP2 to a bovine xenograft/collagen vehicle carrier failed to provide a significant added value in terms of bone regeneration or re-osseointegration, (b) partial re-osseointegration of a previously contaminated surface was achieved, although (c) a complete defect resolution and re-osseointegration to the level previous to the induction of the disease failed to occur in any of the treatment groups.

Chitosan film as rhBMP2 carrier: delivery properties for bone tissue application.

Tissue engineering approaches need biomaterials with suitable properties to provide an appropriate environment for cell attachment and growth. The performance of these biomaterials can be greatly enhanced through the incorporation of bioactive agents. For this reason, we developed chitosan films with cell-attachment ability, rhBMP-2 carrier capacity, and good in vivo performance, and we employ them as covering for implantable materials. In this work, we have tried to explain how the rh-BMP2 is delivered to the surroundings from the development chitosan films. Protein diffusion from film, film stability versus in vitro dissolution, and biodegradation were evaluated to study rhBMP-2 delivery. Our results show that chitosan film has sufficiently good features to be used as an rhBMP-2 carrier. A low diffusion rate was observed, which was sufficient to quickly induce an in vitro differentiation stimulus, although heavily activated films retain more than 80-85% of the protein on the film. On the other hand, we estimated that chitosan film dissolution due to initial acidification in the wound environment is no more than 15-20%. We also estimated chitosan film response to lysozyme and concluded that degradation via this process proceeded at a slow kinetic rate. In addition, rhBMP-2 in vitro activity after film processing, as well as in vivo film behavior, were studied. We confirm that rhBMP-2 remains active on the film and after release, both in vitro and in vivo. These results support the conclusion that the developed chitosan film allows sustained release of the rhBMP-2 osteoinductive protein and could be used as an activated coat for implant and surgical prosthesis.

Gellan gum based physical hydrogels incorporating highly valuable endogen molecules and associating BMP-2 as bone formation platforms.

Physical hydrogels have been designed for a double purpose: as growth factor delivery systems and as scaffolds to support cell colonization and formation of new bone. Specifically, the polysaccharide gellan gum and the ubiquitous endogenous molecules chondroitin, albumin and spermidine have been used as exclusive components of these hydrogels. The mild ionotropic gelation technique was used to preserve the bioactivity of the selected growth factor, rhBMP-2. In vitro tests demonstrated the effective delivery of rhBMP-2 in its bioactive form. In vivo experiments performed in the muscle tissue of Wistar rats provided a proof of concept of the ability of the developed platforms to elicit new bone formation. Furthermore, this biological effect was better than that of a commercial formulation currently used for regenerative purposes, confirming the potential of these hydrogels as new and innovative growth factor delivery platforms and scaffolds for regenerative medicine applications.

[Bone regeneration in oral surgery]. / Regeneración ósea en cirugía oral.

Bone regeneration is the technique of choice in order to repair small and medium sized bone defects in maxillary. It is used as an auxiliary medical treatment for dental implants. In this work, we show the different state of the art techniques used in bone lesions repair, and we also show experimental results obtained in our research group using bone morphogenetic protein BMP-2. This protein has been expressed in an E. Coli strain previously modified with the protein nucleotide sequence. We also show a carrier developed in our laboratory that is able to bind the rhBMP-2 and to liberate it in its active form. The mechanical properties of the carrier can be chemically modified. We have tested Ti implants covered with films of this material activated with rhBMP-2. The experimental in vivo results obtained with this kind of implants has been impressive.

Biological properties of solid free form designed ceramic scaffolds with BMP-2: in vitro and in vivo evaluation.

Porous ceramic scaffolds are widely studied in the tissue engineering field due to their potential in medical applications as bone substitutes or as bone-filling materials. Solid free form (SFF) fabrication methods allow fabrication of ceramic scaffolds with fully controlled pore architecture, which opens new perspectives in bone tissue regeneration materials. However, little experimentation has been performed about real biological properties and possible applications of SFF designed 3D ceramic scaffolds. Thus, here the biological properties of a specific SFF scaffold are evaluated first, both in vitro and in vivo, and later scaffolds are also implanted in pig maxillary defect, which is a model for a possible application in maxillofacial surgery. In vitro results show good biocompatibility of the scaffolds, promoting cell ingrowth. In vivo results indicate that material on its own conducts surrounding tissue and allow cell ingrowth, thanks to the designed pore size. Additional osteoinductive properties were obtained with BMP-2, which was loaded on scaffolds, and optimal bone formation was observed in pig implantation model. Collectively, data show that SFF scaffolds have real application possibilities for bone tissue engineering purposes, with the main advantage of being fully customizable 3D structures.

Improvement of porous beta-TCP scaffolds with rhBMP-2 chitosan carrier film for bone tissue application.

Ceramic materials are osteoconductive matrices extensively used in bone tissue engineering approaches. The performance of these types of biomaterials can be greatly enhanced by the incorporation of bioactive agents and materials. It is previously reported that chitosan is a biocompatible, biodegradable material that enhances bone formation. In the other hand, bone morphogenetic protein-2 (BMP-2) is a well-known osteoinductive factor. In this work we coated porous beta-tricalcium phosphate (beta-TCP) scaffolds with recombinant human BMP-2 (rhBMP-2) carrier chitosan films and studied how they could modify the ceramic physicochemical properties, cellular response, and in vivo bone generation. Initial beta-TCP disks with an average diameter of 5.78 mm, 2.9 mm thickness, and 53% porosity were coated with a chitosan film. These coating properties were studied by X-ray diffraction, Fourier transform-infrared analysis, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray analysis (EDX). Treatment modified the scaffold porous distribution and increased the average hardness. The biocompatibility did not seem to be altered. In addition, adhered C2C12 cells expressed alkaline phosphatase activity, related to cell differentiation toward osteogenic lineage, due to the incorporation of rhBMP-2. On the other hand, in vivo observations showed new bone formation 3 weeks after surgery, a much shorter time than control beta-TCP ceramics. These results suggest that developed coating improved porous beta-TCP scaffold for bone tissue applications and added osteoinductive properties.