RESUMEN
OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Imagenología Tridimensional , Mandíbula , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Mandíbula/diagnóstico por imagen , Mandíbula/crecimiento & desarrollo , Mandíbula/anatomía & histología , Adulto , Femenino , Masculino , Adolescente , Estudios Transversales , Adulto Joven , Imagenología Tridimensional/métodos , Cefalometría/métodos , Maloclusión Clase I de Angle/diagnóstico por imagen , Maloclusión Clase I de Angle/patología , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/patología , Maloclusión de Angle Clase III/diagnóstico por imagen , Maloclusión de Angle Clase III/patologíaRESUMEN
BACKGROUND: To compare and investigate the effects of intraoral ageing on the thickness of one group of directly printed and two groups of thermoformed aligners on the labial surface of maxillary central incisors. MATERIALS AND METHODS: Six groups (12 samples per group) were included in this prospective in vivo experiment. Groups DP-Clin, INV-Clin and CA-Clin consisted of directly printed (Tera Harz TC-85 DAC resin), thermoformed (Invisalign, PU based polymer) and in house thermoformed (CA-Pro, PET-G based polymer) aligners, retrieved after 1 week of intraoral service. Groups DP-Ctr, INV-Ctr and CA-Ctr included unused aligners samples. Thickness measurements were conducted using confocal laser scanning microscopy (CLSM). Data that underwent log-10 transformation was analysed by multiple linear regression analysis (p < .05). RESULTS: Statistically significant differences were found between the materials in both Clin and Ctr categories (p < .001). Group DP had the highest thickness among the groups and the least thickness was observed in the CA group (p < .001). However, intraoral ageing did not significantly affect the aligner thickness of any groups. CONCLUSIONS: Both thermoforming and direct printing of clear aligners led to thickness deviations in terms of increase for printed aligners and decrease for thermoformed aligners. Intraoral ageing did not affect the aligner thickness in any of the groups.
RESUMEN
OBJECTIVE: Aim of this randomized clinical controlled trial was to evaluate the influence of fixed orthodontic steel retainers on gingival health and recessions of mandibular anterior teeth. MATERIALS AND METHODS: After end of the orthodontic treatment, patients were randomly assigned into the test (fixed steel retainer) or control group (modified removable vacuum-formed retainer). Periodontal parameters (periodontal probing depth: PPD; recession: REC; bleeding on probing: BOP) as well as plaque and gingival index were assessed on mandibular anterior teeth directly before attaching/handing over the retainer (baseline: BL), 6 and 12 months after orthodontic treatment. RESULTS: 37 patients (test: n = 15, mean age: 16.1±4.2 years; control: n = 17, mean age: 17.1±5.4 years) completed the study. REC and PPD failed to show significant pairwise differences. The number of patients showing gingival health in the area of the mandibular anterior teeth (test: BL n = 10, 6 months n = 9, 12 months n = 11; control: BL n = 10, 6 months n = 16, 12 months n = 15) revealed a significant difference for the intra-group comparison between BL and 6 months in the control group (p = 0.043). The inter-group comparisons failed to show significant differences. CONCLUSION: Young orthodontically treated patients with fixed steel retainers show in 73.3% healthy gingival conditions after one year which are comparable to the control group (88.2%). Gingival recessions were in a clinically non-relevant range at any time of the examination. CLINICAL TRIAL NUMBER: DRKS00016710.
Asunto(s)
Enfermedades de las Encías , Recesión Gingival , Humanos , Niño , Adolescente , Adulto Joven , Adulto , Acero , Encía , Periodoncio , Recesión Gingival/etiología , Diseño de Aparato OrtodóncicoRESUMEN
BACKGROUND: The determination of the maxillary occlusal plane presents a significant clinical challenge in the treatment of edentulous patients as well as it is critical for complex full-mouth reconstructions in dentate patients, including those with implant-supported rehabilitations. While the use of a Fox plane plate is standard in edentulous cases, its application in dentate patients lacks thorough documentation in existing literature. PURPOSE: This clinical study assessed the sagittal position of the maxillary dentition in relation to facial landmarks using a digital three-dimensional analysis and evaluated the suitability and reliability of applying a simulated Fox plane plate, also known as an occlusal plane guide, in dentate patients. MATERIALS AND METHODS: Eighty-one subjects were recruited at the Department of Prosthetic Dentistry of Goethe University Frankfurt, Germany, according to specific inclusion criteria. Intraoral and facial scans were obtained and analyzed using GOM Inspect Pro software (GOM, Braunschweig, Germany). The angles between the maxillary occlusal plane and three variations each of Camper's plane and ala-tragus line, relating to superior, middle, and inferior tragus points, were measured. These modified planes were then compared to a plane established by a simulated digital Fox plane plate, which was adapted to the maxillary anterior teeth and the lowest point of the posterior teeth in both quadrants. RESULTS: A total of 81 subjects (58 female and 23 male) with a mean age of 23.9 years were evaluated in this study. No significant angular difference was found between the angles of the maxillary occlusal plane compared with superior Camper's plane, middle Camper's plane, or superior ala-tragus line (p >0.05). The smallest angle occurred between superior Camper's plane and the maxillary occlusal plane on both the right (3.443°) and left (3.535°) sides. The application of a Fox plane plate resulted in two different occlusal planes in 70% of patients, significantly deviating from the digitally determined plane (p <0.05). CONCLUSION: Superior and middle Camper's planes, along with superior ala-tragus line, can be considered approximately parallel reference planes and are suitable for routine determining of the maxillary occlusal plane in restorative treatments. However, in contrast to digital evaluation methods, the application of a Fox plane plate in dentate patients showed high variability, indicating its low reproducibility due to its ambiguous positioning on the maxillary dentition. Clinical trial registration site: https://drks.de/search/de/trial/DRKS00030166.
RESUMEN
Introduction: The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the association between the VSP and various factors including type of birth, gender, tongue posture, lip incompetence, eruption of primary molars, habits and the presence of malocclusions in children with primary and early mixed dentition. Material and method: A total of 219 children (102 boys and 117 girls) were evaluated using a combination of a questionnaire and a structured clinical examination by one pediatric specialist dentist. Kittel's method of tongue posture evaluation and the Payne technique for assessment of swallowing pattern were included in the clinical examination of myofunctional status. After checking for normality, normal and non-normal distributed data were analyzed using two-sample t-test and Mann-Whitney U test, respectively. Analysis of categorical variables was done using a chi-square test, and Bonferroni correction was used as correction for multiple comparisons. Results: A total of 56.2 % of the study population had a VSP. The chi-square test indicated a statistically significant higher presence of VSP in male gender. Statistically significant associations were seen between the VSP and lip incompetency, pathologic resting tongue position, habits, anterior open bite and increased overjet. On the other hand, no statistically significant associations were found between VSP and children's age within the sample population, type of birth, uni- or bilateral crossbites, increased overbite, edge-to-edge anterior bite or completion of eruption of primary molars and/or permanent incisors. Conclusions: The association between VSP and male gender, pathologic tongue posture, lip incompetency and habits and occlusal traits such as anterior open bite and increased anterior overjet is supported by the results of the present study.
RESUMEN
INTRODUCTION: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. OBJECTIVE: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. MATERIAL AND METHODS: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. RESULTS: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). CONCLUSION: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.
Asunto(s)
Diente Premolar , Arco Dental , Modelos Dentales , Extracción Dental , Humanos , Arco Dental/anatomía & histología , Masculino , Diente Premolar/cirugía , Femenino , Estudios Retrospectivos , Niño , Adolescente , Diseño de Aparato Ortodóncico , Cefalometría , Diente Molar , Soportes Ortodóncicos , Diente Canino , Ortodoncia Correctiva/métodos , Técnicas de Movimiento Dental/métodos , Técnicas de Movimiento Dental/instrumentación , Aparatos Ortodóncicos FijosRESUMEN
Background/Objectives: The aim of this study was to quantify the threshold of a dental midline shift that would compromise facial attractiveness and indicate a need for treatment from the points of view of laypeople and dental professionals. Methods: Whole-face natural photographs of a male and a female model were digitally manipulated to create various degrees of upper and lower dental midline shifts through bodily movement of the upper or lower midlines as well as alteration of the axial inclination of the upper teeth. The samples were then assessed by two groups of observers (laypeople (LP) and dental professionals (DP)). Results: The lower midline shift did not negatively affect the DP and LP's perceptions of smile attractiveness. The first significant loss of attractiveness was registered by the DP with an upper midline shift of 1 mm in the female model. However, the LP registered this at 2 mm. The DP registered the necessity of treatment at a threshold of 2 mm in the female model and 3 mm in the male model. LP identified the need for treatment at 3 mm for both males and females. The female model was judged more critically than her male counterpart by both female and male observers. Conclusions: DP assess the midline deviation more critically than LP. Both DP and LP were more sensitive to midline deviations in the female model regardless of their own gender. Both groups registered the need for treatment at a higher threshold than the reduction in smile attractiveness.
RESUMEN
ABSTRACT Introduction: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. Objective: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. Material and Methods: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. Results: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). Conclusion: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.
RESUMO Introdução: Extrair ou não extrair dentes é uma decisão crucial no tratamento ortodôntico. Objetivo: O objetivo do presente estudo foi investigar as alterações na largura da arcada dentária e no corredor bucal após o tratamento ortodôntico com extração e o tratamento sem extração com o sistema autoligável Damon. Material e Métodos: Esse estudo retrospectivo consistiu de 35 pacientes (20 do sexo feminino e 15 do sexo masculino, com idade média de 12,5 anos), tratados com extração de 4 ou 2 pré-molares; e 37 pacientes (16 do sexo feminino e 21 do sexo masculino, com idade média de 12,8 anos), tratados sem extração de pré-molares. Ambos os grupos foram tratados com o sistema autoligável Damon. Os modelos de gesso antes (T0) e depois (T1) do tratamento foram medidos, e os valores de largura da arcada foram determinados ao nível dos primeiros molares, segundos pré-molares, caninos e rugas palatinas. A largura do corredor bucal foi medida usando as imagens extrabucais em T0 e T1. O teste t pareado foi usado para a análise dos dados com distribuição normal, e o teste U de Wilcoxon Mann-Whitney foi usado para os dados com distribuição não normal. Valores de p < 0,05 foram considerados estatisticamente significativos. Resultados: A distância intercaninos superiores aumentou significativamente em ambos os grupos (p<0,01). No grupo sem extração, a largura da arcada aumentou significativamente na região dos segundos pré-molares e primeiros molares superiores (p<0,01), bem como na região dos caninos (p=0,04), segundos pré-molares (p=0,01) e primeiros molares (p<0,01) inferiores. O corredor bucal diminuiu significativamente no grupo sem extração (p<0,01). Conclusão: A extração de pré-molares em combinação com o sistema autoligável Damon não levou à redução na largura da arcada dentária superior, nem aumentou o tamanho dos corredores bucais.