Characterization of wet aggregate stability of soils by ¹H-NMR relaxometry.

For the assessment of soil structural stability against hydraulic stress, wet sieving or constant head permeability tests are typically used but rather limited in their intrinsic information value. The multiple applications of several tests is the only possibility to assess important processes and mechanisms during soil aggregate breakdown, e.g. the influences of soil fragment release or differential swelling on the porous systems of soils or soil aggregate columns. Consequently, the development of new techniques for a faster and more detailed wet aggregate stability assessment is required. (1)H nuclear magnetic resonance relaxometry ((1)H-NMR relaxometry) might provide these requirements because it has already been successfully applied on soils. We evaluated the potential of (1)H-NMR relaxometry for the assessment of wet aggregate stability of soils, with more detailed information on occurring mechanisms at the same time. Therefore, we conducted single wet sieving and constant head permeability tests on untreated and 1% polyacrylic acid-treated soil aggregates of different textures and organic matter contents, subsequently measured by (1)H-NMR relaxometry after percolation. The stability of the soil aggregates were mainly depending on their organic matter contents and the type of aggregate stabilization, whereby additional effects of clay swelling on the measured wet aggregate stability were identified by the transverse relaxation time (T2) distributions. Regression analyses showed that only the percentage of water stable aggregates could be determined accurately from percolated soil aggregate columns by (1)H-NMR relaxometry measurements. (1)H-NMR relaxometry seems a promising technique for wet aggregate stability measurements but should be further developed for nonpercolated aggregate columns and real soil samples.

Probing the complex ion structure in liquid carbon at 100 GPa.

We present the first direct experimental test of the complex ion structure in liquid carbon at pressures around 100 GPa, using spectrally resolved x-ray scattering from shock-compressed graphite samples. Our results confirm the structure predicted by ab initio quantum simulations and demonstrate the importance of chemical bonds at extreme conditions similar to those found in the interiors of giant planets. The evidence presented here thus provides a firmer ground for modeling the evolution and current structure of carbon-bearing icy giants like Neptune, Uranus, and a number of extrasolar planets.

Bright laser-driven neutron source based on the relativistic transparency of solids.

Neutrons are unique particles to probe samples in many fields of research ranging from biology to material sciences to engineering and security applications. Access to bright, pulsed sources is currently limited to large accelerator facilities and there has been a growing need for compact sources over the recent years. Short pulse laser driven neutron sources could be a compact and relatively cheap way to produce neutrons with energies in excess of 10 MeV. For more than a decade experiments have tried to obtain neutron numbers sufficient for applications. Our recent experiments demonstrated an ion acceleration mechanism based on the concept of relativistic transparency. Using this new mechanism, we produced an intense beam of high energy (up to 170 MeV) deuterons directed into a Be converter to produce a forward peaked neutron flux with a record yield, on the order of 10(10) n/sr. We present results comparing the two acceleration mechanisms and the first short pulse laser generated neutron radiograph.

Full aperture backscatter diagnostics for characterization of laser plasma instabilities at the extreme light infrastructure (ELI) beamlines.

We report on the commissioning of a full aperture backscatter diagnostics station for the kilojoule, nanosecond high repetition rate L4n laser operating at a wavelength of 527 nm at the Extreme Light Infrastructure (ELI) - Beamlines, Dolni Brezany, Czech Republic. Light scattered back from laser-plasma interaction into the cone of the final focusing lens is captured and split into different channels to measure the signatures of laser plasma instabilities from stimulated Brillouin scattering, stimulated Raman scattering, and two plasmon decay with respect to back scattered energy, its spectrum, and its temporal profile. The performance was confirmed in a commissioning experiment with more than 800 shots at laser intensities ranging from 0.5 × 1013 to 1.1 × 1015 W cm-2. These diagnostics are permanently installed at ELI Beamlines, and can be used to understand the details of laser-plasma interactions in experiments with kJ and 527 nm light. The large number of shots that can be collected in an experimental campaign will allow us to study the details of the laser-plasma interaction with a high level of confidence.

Kilotesla plasmoid formation by a trapped relativistic laser beam.

A strong quasistationary magnetic field is generated in hollow targets with curved internal surface under the action of a relativistically intense picosecond laser pulse. Experimental data evidence the formation of quasistationary strongly magnetized plasma structures decaying on a hundred picoseconds timescale, with the magnetic field strength of the kilotesla scale. Numerical simulations unravel the importance of transient processes during the magnetic field generation and suggest the existence of fast and slow regimes of plasmoid evolution depending on the interaction parameters. The proposed setup is suited for perspective highly magnetized plasma application and fundamental studies.

Neural network analysis of quasistationary magnetic fields in microcoils driven by short laser pulses.

Optical generation of kilo-tesla scale magnetic fields enables prospective technologies and fundamental studies with unprecedentedly high magnetic field energy density. A question is the optimal configuration of proposed setups, where plenty of physical phenomena accompany the generation and complicate both theoretical studies and experimental realizations. Short laser drivers seem more suitable in many applications, though the process is tangled by an intrinsic transient nature. In this work, an artificial neural network is engaged for unravelling main features of the magnetic field excited with a picosecond laser pulse. The trained neural network acquires an ability to read the magnetic field values from experimental data, extremely facilitating interpretation of the experimental results. The conclusion is that the short sub-picosecond laser pulse may generate a quasi-stationary magnetic field structure living on a hundred picosecond time scale, when the induced current forms a closed circuit.

Spatially resolved online particle detector using scintillators for laser-driven particle sources.

Laser-based particle accelerators have been an active field of research for over two decades moving from laser systems capable of one shot every hour to systems able to deliver repetition rates in the Hz regime. Based on the advancements in laser technology, the corresponding detection methods need to develop from single to multiple use with high readout speed. Here, we present an online compact tracker of particles using scintillators with nine resolvable energy levels and a spatial resolution of 3.6 × 3.6 mm2 over the whole active area. This paper describes the design and construction of the detector, which is based on pixellated scintillators embedded inside an absorber matrix. The scintillator pixels are fiberoptically coupled to a camera system for online readout and analysis. Calibration with a radioactive source and first experimental data measuring laser accelerated ions at the PHELIX laser at GSI, Darmstadt, Germany, are presented and discussed.

Analysis of laser-proton acceleration experiments for development of empirical scaling laws.

Numerous experiments on laser-driven proton acceleration in the MeV range have been performed with a large variety of laser parameters since its discovery around the year 2000. Both experiments and simulations have revealed that protons are accelerated up to a maximum cut-off energy during this process. Several attempts have been made to find a universal model for laser proton acceleration in the target normal sheath acceleration regime. While these models can qualitatively explain most experimental findings, they can hardly be used as predictive models, for example, for the energy cut-off of accelerated protons, as many of the underlying parameters are often unknown. Here we analyze experiments on laser proton acceleration in which scans of laser and target parameters were performed. We derive empirical scaling laws from these parameter scans and combine them in a scaling law for the proton energy cut-off that incorporates the laser pulse energy, the laser pulse duration, the focal spot radius, and the target thickness. Using these scaling laws, we give examples for predicting the proton energy cut-off and conversion efficiency for state-of-the-art laser systems.

Microstructured layered targets for improved laser-induced x-ray backlighters.

We present the usage of two-layer targets with laser-illuminated front-side microstructures for x-ray backlighter applications. The targets consisted of a silicon front layer and copper back side layer. The structured layer was irradiated by the 500-fs PHELIX laser with an intensity above 10^{20}Wcm^{-2}. The total emission and one-dimensional extent of the copper Kα x-ray emission as well as a wide spectral range between 7.9 and 9.0 keV were recorded with an array of crystal spectrometers. The measurements show that the front-side modifications of the silicon in the form of conical microstructures maintain the same peak brightness of the Kα emission as flat copper foils while suppressing the thermal emission background significantly. The observed Kα source sizes can be influenced by tilting the conical microstructures with respect to the laser axis. Overall, the recorded copper Kα photon yields were in the range of 10^{11}sr^{-1}, demonstrating the suitability of these targets for probing applications without subjecting the probed material to additional heating from thermal line emission.

Ultrafast melting of carbon induced by intense proton beams.

Laser-produced proton beams have been used to achieve ultrafast volumetric heating of carbon samples at solid density. The isochoric melting of carbon was probed by a scattering of x rays from a secondary laser-produced plasma. From the scattering signal, we have deduced the fraction of the material that was melted by the inhomogeneous heating. The results are compared to different theoretical approaches for the equation of state which suggests modifications from standard models.

Guiding of relativistic electron beams in dense matter by laser-driven magnetostatic fields.

Intense lasers interacting with dense targets accelerate relativistic electron beams, which transport part of the laser energy into the target depth. However, the overall laser-to-target energy coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. Here we demonstrate that an efficient guiding of MeV electrons with about 30 MA current in solid matter is obtained by imposing a laser-driven longitudinal magnetostatic field of 600 T. In the magnetized conditions the transported energy density and the peak background electron temperature at the 60-µm-thick target's rear surface rise by about a factor of five, as unfolded from benchmarked simulations. Such an improvement of energy-density flux through dense matter paves the ground for advances in laser-driven intense sources of energetic particles and radiation, driving matter to extreme temperatures, reaching states relevant for planetary or stellar science as yet inaccessible at the laboratory scale and achieving high-gain laser-driven thermonuclear fusion.

Temperature measurement of hohlraum radiation for energy loss experiments in indirectly laser heated carbon plasma.

For ion energy loss measurements in plasmas with near solid densities, an indirect laser heating scheme for carbon foils has been developed at GSI Helmholtzzentrum für Schwerionenforschung GmbH (Darmstadt, Germany). To achieve an electron density of 10^{22}cm^{3} and an electron temperature of 10-30eV, two carbon foils with an areal density of 100µg/cm^{2} heated in a double-hohlraum configuration have been chosen. In this paper we present the results of temperature measurements of both primary and secondary hohlraums for two different hohlraum designs. They were heated by the PHELIX laser with a wavelength of 527nm and an energy of 150J in 1.5ns. For this purpose the temperature has been investigated by an x-ray streak camera with a transmission grating as the dispersive element.

Experimental discrimination of ion stopping models near the Bragg peak in highly ionized matter.

The energy deposition of ions in dense plasmas is a key process in inertial confinement fusion that determines the α-particle heating expected to trigger a burn wave in the hydrogen pellet and resulting in high thermonuclear gain. However, measurements of ion stopping in plasmas are scarce and mostly restricted to high ion velocities where theory agrees with the data. Here, we report experimental data at low projectile velocities near the Bragg peak, where the stopping force reaches its maximum. This parameter range features the largest theoretical uncertainties and conclusive data are missing until today. The precision of our measurements, combined with a reliable knowledge of the plasma parameters, allows to disprove several standard models for the stopping power for beam velocities typically encountered in inertial fusion. On the other hand, our data support theories that include a detailed treatment of strong ion-electron collisions.

Nanosecond formation of diamond and lonsdaleite by shock compression of graphite.

The shock-induced transition from graphite to diamond has been of great scientific and technological interest since the discovery of microscopic diamonds in remnants of explosively driven graphite. Furthermore, shock synthesis of diamond and lonsdaleite, a speculative hexagonal carbon polymorph with unique hardness, is expected to happen during violent meteor impacts. Here, we show unprecedented in situ X-ray diffraction measurements of diamond formation on nanosecond timescales by shock compression of pyrolytic as well as polycrystalline graphite to pressures from 19 GPa up to 228 GPa. While we observe the transition to diamond starting at 50 GPa for both pyrolytic and polycrystalline graphite, we also record the direct formation of lonsdaleite above 170 GPa for pyrolytic samples only. Our experiment provides new insights into the processes of the shock-induced transition from graphite to diamond and uniquely resolves the dynamics that explain the main natural occurrence of the lonsdaleite crystal structure being close to meteor impact sites.

Effect of plastic mulching on mycotoxin occurrence and mycobiome abundance in soil samples from asparagus crops.

Plastic mulching (PM) is widely used in modern agriculture because of its advantageous effects on soil temperature and water conservation, factors which strongly influence the microbiology of the soil. The aim of this study was to assess the effect of PM on mycotoxin occurrence in relation with mycobiome abundance/diversity and soil physicochemical properties. Soil samples were collected from green (GA) and white asparagus (WA) crops, the last under PM. Both crops were cultivated in a ridge-furrow-ridge system without irrigation. Samples were analyzed for mycotoxin occurrence via liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS). Total colony-forming unit was indicative of mycobiome abundance, and analysis of mycobiome diversity was performed by internal transcribed spacer (ITS) sequencing. PM avoided the drop of soil temperature in winter and allowed higher soil temperature in early spring compared to non-covered soil. Moreover, the use of PM provided controlled conditions for water content in soil. This was enough to generate a dissimilar mycotoxin occurrence and mycobiome diversity/abundance in covered and non-covered soil. Mycotoxin soil contamination was confirmed for deoxynivalenol (DON), range LOD to 32.1 ng/g (LOD = 1.1 ng/g). The DON values were higher under PM (average 16.9 ± 10.1 ng/g) than in non-covered soil (9.1 ± 7.9 ng/g); however, this difference was not statically significant (p = 0.09). Mycobiome analysis showed a fungal compartment up to fivefold higher in soil under PM compared to GA. The diversity of the mycobiome varied between crops and also along the soil column, with an important dominance of Fusarium species at the root zone in covered soils.

Development of QSAR-based two-stage prediction model for estimating mixture toxicity.

Conventionally, concentration addition (CA) and independent action (IA) models based on additive toxicity are often used to estimate the mixture toxicity of similarly- and dissimilarly-acting chemicals, respectively. A two-stage prediction (TSP) model has been developed as an integrated addition model that can perform the CA and IA calculations stage by stage. However, the use of the conventional TSP model is limited if the mode of toxic action (MoA) for every mixture component is not readily known. The aim of this study was to develop and evaluate a quantitative structure-activity relationship-based TSP (QSAR-TSP) model for estimating mixture toxicity in the absence of knowledge on the MoAs of the constituents. For this purpose, different clustering methods of mixture constituents using computerized analysis based on the structural similarity between chemicals were applied as a part of the predictions of mixture toxicity. The relative importance of molecular descriptors was additionally determined by Random Forest analysis. This study highlights the prediction power of the QSAR-TSP model and its potential to overcome the limitations of the conventional TSP model, and how clustering methods of mixture components that employ chemical structural information to categorize might be applied to predict mixture toxicity effectively.

Development of a Nomarski-type multi-frame interferometer as a time and space resolving diagnostics for the free electron density of laser-generated plasma.

This article reports on the development and set-up of a Nomarski-type multi-frame interferometer as a time and space resolving diagnostics of the free electron density in laser-generated plasma. The interferometer allows the recording of a series of 4 images within 6 ns of a single laser-plasma interaction. For the setup presented here, the minimal accessible free electron density is 5 × 10(18) cm(-3), the maximal one is 2 × 10(20) cm(-3). Furthermore, it provides a resolution of the electron density in space of 50 µm and in time of 0.5 ns for one image with a customizable magnification in space for each of the 4 images. The electron density was evaluated from the interferograms using an Abel inversion algorithm. The functionality of the system was proven during first experiments and the experimental results are presented and discussed. A ray tracing procedure was realized to verify the interferometry pictures taken. In particular, the experimental results are compared to simulations and show excellent agreement, providing a conclusive picture of the evolution of the electron density distribution.

Time- and spectrally resolved measurements of laser-driven hohlraum radiation.

At the GSI Helmholtz center for heavy-ion research combined experiments with heavy ions and laser-produced plasmas are investigated. As a preparation to utilize indirectly heated targets, where a converter hohlraum provides thermal radiation to create a more homogeneous plasma, this converter target has to be characterized. In this paper the latest results of these measurements are presented. Small spherical cavities with diameters between 600 and 750 µm were heated with laser energies up to 30 J at 532-nm wavelength. Radiation temperatures could be determined by time-resolved as well as time-integrated diagnostics, and maximum values of up to 35 eV were achieved.

Energy loss of argon in a laser-generated carbon plasma.

The experimental data presented in this paper address the energy loss determination for argon at 4 MeV/u projectile energy in laser-generated carbon plasma covering a huge parameter range in density and temperature. Furthermore, a consistent theoretical description of the projectile charge state evolution via a Monte Carlo code is combined with an improved version of the CasP code that allows us to calculate the contributions to the stopping power of bound and free electrons for each projectile charge state. This approach gets rid of any effective charge description of the stopping power. Comparison of experimental data and theoretical results allows us to judge the influence of different plasma parameters.

Melting and freezing of water in cylindrical silica nanopores.

Freezing and melting of H(2)O and D(2)O in the cylindrical pores of well-characterized MCM-41 silica materials (pore diameters from 2.5 to 4.4 nm) was studied by differential scanning calorimetry (DSC) and (1)H NMR cryoporometry. Well-resolved DSC melting and freezing peaks were obtained for pore diameters down to 3.0 nm, but not in 2.5 nm pores. The pore size dependence of the melting point depression DeltaT(m) can be represented by the Gibbs-Thomson equation when the existence of a layer of nonfreezing water at the pore walls is taken into account. The DSC measurements also show that the hysteresis connected with the phase transition, and the melting enthalpy of water in the pores, both vanish near a pore diameter D* approximately equal to 2.8 nm. It is concluded that D* represents a lower limit for first-order melting/freezing in the pores. The NMR spin echo measurements show that a transition from low to high mobility of water molecules takes place in all MCM-41 materials, including the one with 2.5 nm pores, but the transition revealed by NMR occurs at a higher temperature than indicated by the DSC melting peaks. The disagreement between the NMR and DSC transition temperatures becomes more pronounced as the pore size decreases. This is attributed to the fact that with decreasing pore size an increasing fraction of the water molecules is situated in the first and second molecular layers next to the pore wall, and these molecules have slower dynamics than the molecules in the core of the pore.