RESUMEN
Understanding properties and mechanisms that govern drug degradation in the solid state is of high importance to ensure drug stability and safety of solid dosage forms. In this study, we attempt to understand drug-excipient interactions in the solid state using both theoretical and experimental approaches. The model active pharmaceutical ingredients (APIs) under study are carvedilol (CAR) and codeine phosphate (COP), which are known to undergo esterification with citric acid (CA) in the solid state. Starting from the crystal structures of two different polymorphs of each compound, we calculated the exposure and accessibility of reactive hydroxyl groups for a number of relevant crystal surfaces, as well as descriptors that could be associated with surface stabilities using molecular simulations. Accelerated degradation experiments at elevated temperature and controlled humidity were conducted to assess the propensity of different solid forms of the model APIs to undergo chemical reactions with anhydrous CA or CA monohydrate. In addition, for CAR, we studied the solid state degradation at varying humidity levels and also under mechano-activation. Regarding the relative degradation propensities, we found that variations in the exposure and accessibility of molecules on the crystal surface play a minor role compared to the impact of molecular mobility due to different levels of moisture. We further studied drug-excipient interactions under mechano-activation (comilling of API and CA) and found that the reaction proceeded even faster than in physical powder mixtures kept at accelerated storage conditions.
Asunto(s)
Carbazoles/química , Ácido Cítrico/química , Codeína/química , Excipientes/química , Propanolaminas/química , Carvedilol , Cristalización , Estabilidad de Medicamentos , Esterificación , Humedad , Polvos/química , Temperatura , Agua/químicaRESUMEN
A model is presented for determining the time when an active pharmaceutical ingredient in tablets/powders will remain within its specification limits during an in-use period; that is, when a heat-induction sealed bottle is opened for fixed time periods and where tablets are removed at fixed time points. This model combines the Accelerated Stability Assessment Program to determine the impact on degradation rates of relative humidity (RH) with calculations of the RH as a function of time for the dosage forms under in-use conditions. These calculations, in a conservative approach, assume that the air inside bottles with broached heat-induction seals completely exchanges with the external environment during periods when the bottle remains open. The solid dosages are assumed to sorb water at estimable rates during these openings. When bottles are capped, the moisture vapor transmission rate can be estimated to determine the changing RH inside the bottles between opening events. The impact of silica gel desiccants can also be included in the modeling.
Asunto(s)
Embalaje de Medicamentos/métodos , Polvos/química , Comprimidos/química , Agua/química , Liberación de Fármacos , Estabilidad de Medicamentos , Humedad , Cinética , TemperaturaRESUMEN
In pharmaceutical analysis, the results of drug product assay testing are used to make decisions regarding the quality, efficacy, and stability of the drug product. In order to make sound risk-based decisions concerning drug product potency, an understanding of the uncertainty of the reportable assay value is required. Utilizing the most restrictive criteria in current regulatory documentation, a maximum variability attributed to method repeatability is defined for a drug product potency assay. A sampling strategy that reduces the repeatability component of the assay variability below this predefined maximum is demonstrated. The sampling strategy consists of determining the number of dosage units (k) to be prepared in a composite sample of which there may be a number of equivalent replicate (r) sample preparations. The variability, as measured by the standard error (SE), of a potency assay consists of several sources such as sample preparation and dosage unit variability. A sampling scheme that increases the number of sample preparations (r) and/or number of dosage units (k) per sample preparation will reduce the assay variability and thus decrease the uncertainty around decisions made concerning the potency of the drug product. A maximum allowable repeatability component of the standard error (SE) for the potency assay is derived using material in current regulatory documents. A table of solutions for the number of dosage units per sample preparation (r) and number of replicate sample preparations (k) is presented for any ratio of sample preparation and dosage unit variability.
Asunto(s)
Técnicas de Química Analítica , Química Farmacéutica/métodos , Química Farmacéutica/normas , Administración Oral , Bioensayo , Cápsulas/química , Control de CalidadRESUMEN
The potential presence of N-nitrosamines in medicinal products has become a matter of concern for health authorities and pharmaceutical companies. However, very little information is available in published literature on N-nitrosamine formation within pharmaceutical drug products. In response, experiments were undertaken to test if secondary and tertiary amines present in solid drug products could undergo nitrosation due to the presence of nitrite in the excipients used in the manufacture of the drug product. This work focused on solid dosage forms exploring several model amines of varying chemical structure, solubility and pKa which were formulated using common excipients with and without added nitrite. Monitoring the formation of the N-nitrosamines after processing and upon stressed stability conditions showed that N-nitrosamine formation can occur in solid drug product formulations. The results show that the rate and extent of N-nitrosamine formation depend upon the solubility of the amine, level of nitrite, expected local acidity in water layers within the drug product and mode of processing. Our findings agree with the rank order of dosage form risk from the published EFPIA workflows for quality risk management of N-nitrosamine risks in medicines (EFPIA, 2022): amorphous > wet granulation > direct compression > dry blends. In all cases the level of N-nitrosamine formation in solid dosage forms plateaued at a level that was significantly lower than the maximum theoretical yield based on the level of nitrite present. Trace secondary amine impurities were shown to be a significantly lower risk relative to cases containing a secondary amine present at drug substance levels. A comparison of secondary and simple tertiary alkylamine reactivity showed the tertiary amine to be significantly less reactive with nitrite.
Asunto(s)
Nitrosaminas , Nitrosaminas/química , Nitritos , Excipientes , Aminas/química , AguaRESUMEN
Lorlatinib is an active pharmaceutical ingredient (API) used in the treatment of lung cancer. Here, an NMR crystallography analysis is presented whereby the single-crystal X-ray diffraction structure (CSD: 2205098) determination is complemented by multinuclear (1H, 13C, 14/15N, 19F) magic-angle spinning (MAS) solid-state NMR and gauge-including projector augmented wave (GIPAW) calculation of NMR chemical shifts. Lorlatinib crystallises in the P21 space group, with two distinct molecules in the asymmetric unit cell, Z' = 2. Three of the four NH2 hydrogen atoms form intermolecular hydrogen bonds, N30-H N15 between the two distinct molecules and N30-H O2 between two equivalent molecules. This is reflected in one of the NH21H chemical shifts being significantly lower, 4.0 ppm compared to 7.0 ppm. Two-dimensional 1H-13C, 14N-1H and 1H (double-quantum, DQ)-1H (single-quantum, SQ) MAS NMR spectra are presented. The 1H resonances are assigned and specific HH proximities corresponding to the observed DQ peaks are identified. The resolution enhancement at a 1H Larmor frequency of 1 GHz as compared to 500 or 600 MHz is demonstrated.
Asunto(s)
Pirazoles , Enlace de Hidrógeno , Espectroscopía de Resonancia Magnética/métodos , Cristalografía por Rayos XRESUMEN
A slowdown in dissolution performance has been observed for an immediate release tablet formulation during long-term stability testing. The slowdown was successfully predicted using an accelerated stability study in which the dissolution was tested over a range of temperatures, humidity conditions and storage times. The slowdown was quantified using a calculated parameter referred to as the "acceleration factor" (AF); this is the degree by which the timescale (x-axis) of a dissolution profile needs to be scaled to overlay it on to the dissolution profile obtained at the initial timepoint. The "AF" approach was applicable because it was observed that the shape of the dissolution profile remains consistent even though different dissolution rates were obtained. Under the accelerated stability conditions, the AF is observed to follow an "exponential decay" curve. A predictive model for the long-term stability dissolution was obtained by modeling both the plateau level and the rate constant for the exponential decay curve as functions of temperature and humidity. The long-term stability of product A in packaging was successfully predicted using this model in combination with simulations of the changing relative humidity conditions inside the packaging.
Asunto(s)
Solubilidad/efectos de los fármacos , Comprimidos/química , Embalaje de Medicamentos/métodos , Estabilidad de Medicamentos , Humedad , TemperaturaRESUMEN
Degradation rates of solid-state drug products generally increase as the drug load decreases. A model for quantifying this effect based on surface area ratios is proposed here. This model relates the degradation rate to an estimate of the proportion of drug substance in contact with the excipient, and that the drug substance in contact with excipients degrades more quickly. Degradation data from previously published case studies and from 5 new case studies were found to be consistent with our proposed model; our model performed better than similar previously published models. It was also found that the relationship between degradation rate and drug load is largely independent of the temperature and humidity conditions, suggesting that drug load solely affects the pre-exponential factor of the Arrhenius equation and does not significantly affect the activation energy of the degradation process. A second method for calculating the proportion of the drug substance surface in contact with the excipient surface is presented in the Supplementary Material. Fundamentally, the 2 methods are very similar and provide almost identical fits to the experimental data.
Asunto(s)
Preparaciones Farmacéuticas/química , Estabilidad de Medicamentos , Excipientes/química , Humedad , TemperaturaRESUMEN
Stability studies of pharmaceutical drug products and pharmaceutical active substances are important to research and development in order to fully understand and maintain product quality and safety throughout its shelf-life. Oxidative forced degradation studies are among the different types of stability studies performed by the pharmaceutical industry in order to understand the intrinsic stability of drug molecules. We have been comparing the use of electrochemistry as an alternative oxidative forced degradation method to traditional forced degradation and accelerated stability studies. Using the electrochemical degradation approach the substrate oxidation takes place in a commercially available electrochemical cell and the effluent of the cell can be either a) directly infused into the mass spectrometer or b) injected in a chromatographic column for separation of the different products formed prior to the mass spectrometry analysis. To enable the study of large numbers of different experimental conditions and molecules we developed a new dual pump automated electrochemical screening platform. This system used a HPLC pump and autosampler to load and wash the electrochemical cell and deliver the oxidized sample plug to a second injection loop. This system enabled the automatic sequential analyses of large numbers of different solutions under varied experimental conditions without need for operator intervention during the run sequence. Here we describe the system and evaluate its performance using a test molecule with well characterized stability and compare results to those obtained using an off-line electrochemistry approach.
Asunto(s)
Estabilidad de Medicamentos , Técnicas Electroquímicas/métodos , Soluciones Farmacéuticas/análisis , Espectrometría de Masas en Tándem/métodos , Cromatografía Liquida/métodos , Espectrometría de Masas/métodos , Oxidación-Reducción , Soluciones Farmacéuticas/metabolismoRESUMEN
The aim of this study was to evaluate the use of electrochemistry to generate oxidative degradation products of a model pharmaceutical compound. The compound was oxidized at different potentials using an electrochemical flow-cell fitted with a glassy carbon working electrode, a Pd/H2 reference electrode and a titanium auxiliary electrode. The oxidative products formed were identified and structurally characterized by LC-ESI-MS/MS using a high resolution Q-TOF mass spectrometer. Results from electrochemical oxidation using electrolytes of different pH were compared to those from chemical oxidation and from accelerated stability studies. Additionally, oxidative degradation products predicted using an in silico commercially available software were compared to those obtained from the various experimental methods. The electrochemical approach proved to be useful as an oxidative stress test as all of the final oxidation products observed under accelerated stability studies could be generated; previously reported reactive intermediate species were not observed most likely because the electrochemical mechanism differs from the oxidative pathway followed under accelerated stability conditions. In comparison to chemical degradation tests electrochemical degradation has the advantage of being much faster and does not require the use of strong oxidizing agents. Moreover, it enables the study of different operating parameters in short periods of time and optimisation of the reaction conditions (pH and applied potential) to achieve different oxidative products mixtures. This technique may prove useful as a stress test condition for the generation of oxidative degradation products and may help accelerate structure elucidation and development of stability indicating analytical methods.