Electrogenerated Nickel Catalyst for C-N Cross-Coupling.

Arylamines represent a class of compounds widely found in natural products and pharmaceuticals. Among methodologies devoted to their synthesis, nickel-catalyzed amination of aryl halides constitutes one of the most employed conventional strategies. However, C-N cross-couplings often involve elaborated nickel complexes, which are expensive and/or air and moisture sensitive. To circumvent this issue, we herein report an electrochemical method based on a sacrificial anode process to in situ generate a catalytic amount of nickel salts allowing amination of aryl halides. The approach, simple to set up, proceeds under mild reaction conditions and enables access to a large panel of arylamines.

Controlled decomposition of SF6 by electrochemical reduction.

The electroreduction of SF6 is shown at ambient temperature in acetonitrile using an array of platinum microelectrodes to improve the electrical detection. Its half reduction potential occurs at -2.17 V vs Fc+/Fc. The exact number of electrons for the full consumption of sulfur hexafluoride was determined and this gas further quantitatively transformed into environmentally benign fluoride anion and sulfur by electrochemical reduction.

Synthesis and biological evaluation of 3-amino-, 3-alkoxy- and 3-aryloxy-6-(hetero)arylpyridazines as potent antitumor agents.

Various 3-amino-, 3-aryloxy- and alkoxy-6-arylpyridazines have been synthesized by an electrochemical reductive cross-coupling between 3-amino-, 3-aryloxy- or 3-alkoxy-6-chloropyridazines and aryl or heteroaryl halides. In vitro antiproliferative activity of these products was evaluated against a representative panel of cancer cell lines (HuH7, CaCo-2, MDA-MB-231, HCT116, PC3, NCI-H727, HaCaT) and oncogenicity prevention of the more efficient derivatives was highlighted on human breast cancer cell line MDA-MB 468-Luc prior establishing their interaction with p44/42 and Akt-dependent signaling pathways.

A mild electroassisted synthesis of (hetero)arylphosphonates.

The electrochemically-assisted synthesis of (hetero)arylphosphonates from (hetero)aryl halides and dimethyl phosphite is described. Very mild and simple conditions are employed as the cross-coupling is carried out in galvanostatic mode, in an undivided cell at room temperature, using NiBr2bpy as the easily available pre-catalyst and acetonitrile as the solvent. In addition, both aryl bromides and iodides can be used as well, providing the corresponding (hetero)arylphosphonates in generally good yields. A mechanism involving the in situ generation of a Ni ate complex is proposed.

A multicomponent approach to the synthesis of N-sulfonyl ß(2,3)-amino esters.

The multicomponent synthesis of α,ß-disubstituted N-sulfonyl ß-amino esters is described. It involves a zinc-mediated, cobalt-catalyzed three-component reaction between sulfonylimines, acrylates and organic bromides. A possible mechanism is proposed, emphasizing the intermediate formation of an organocobalt as the initiator of a Mannich-like process.

An electrochemical nickel-catalyzed arylation of 3-amino-6-chloropyridazines.

3-Amino-6-aryl- and 3-amino-6-heteroarylpyridazines have been obtained in generally good yield using a nickel-catalyzed electrochemical cross-coupling between 3-amino-6-chloropyridazines and aryl or heteroaryl halides at room temperature. Comparative experiments involving classical palladium-catalyzed reactions, such as Suzuki, Stille, or Negishi cross-couplings, reveal that the electrochemical method can constitute a reliable alternative tool for biaryl formation. A possible reaction mechanism is proposed on the basis of electrochemical analyses.

An electrochemical synthesis of functionalized arylpyrimidines from 4-amino-6-chloropyrimidines and aryl halides.

A range of novel 4-amino-6-arylpyrimidines has been prepared under mild conditions by an electrochemical reductive cross-coupling between 4-amino-6-chloro-pyrimidines and functionalized aryl halides. The process, which employs a sacrificial iron anode in conjunction with a nickel(II) catalyst, allows the formation of coupling products in moderate to high yields.

A straightforward three-component synthesis of alpha-amino esters containing a phenylalanine or a phenylglycine scaffold.

A range of alpha-amino esters has been synthesized in good to high yields using a straightforward three-component reaction among preformed or in situ generated aromatic or benzylic organozinc reagents, primary or secondary amines, and ethyl glyoxylate. The procedure, which is characterized by its simplicity, allows the concise synthesis of esters bearing a phenylglycine or a phenylalanine scaffold.

Three-component synthesis of alpha-branched amines under Barbier-like conditions.

An array of alpha-branched amines has been prepared by using an expedient three-component Mannich-type reaction among organic halides, aldehyde derivatives, and amines. The experimental procedure, which is characterized by its simplicity, employs zinc dust for the in situ generation of organozinc reagents. We show that this Barbier-like protocol constitutes a useful entry to diarylmethylamines, 1,2-diarylethylamines, alpha- or beta-amino esters, benzylamines, and beta-arylethylamines.

Synthesis of 2,3-di- and 2,2,3-trisubstituted-3-methoxycarbonyl-γ-butyrolactones as potent antitumor agents.

Various 2,3-substituted γ-butyrolactones have been synthesized by three-component reaction of aryl bromides, dimethyl itaconate and carbonyl compounds. The in vitro cytotoxic activity of these products was evaluated against a representative panel of cancer cell lines (KB, HCT116, MCF7, MCF7R, PC3, SK-OV3, HL60 and HL60R). One compound (4x) displays a good anti-proliferative activity with IC50 in the sub-micromolar range. The mechanism of action has been investigated using flow cytometry.

Bottom-up preparation of MgH2 nanoparticles with enhanced cycle life stability during electrochemical conversion in Li-ion batteries.

A promising anode material for Li-ion batteries based on MgH2 with around 5 nm average particles size was synthesized by a bottom-up method. A series of several composites containing MgH2 nanoparticles well dispersed into a porous carbon host has been prepared with different metal content up to 70 wt%. A narrow particle size distribution (1-10 nm) of the MgH2 nanospecies with around 5.5 nm average size can be controlled up to 50 wt% Mg. After a ball milling treatment under Ar, the composite containing 50 wt% Mg shows an impressive cycle life stability with a good electrochemical capacity of around 500 mA h g(-1). Moreover, the nanoparticles' size distribution is stable during cycling.

Preparation of functionalized aryl- and heteroarylpyridazines by nickel-catalyzed electrochemical cross-coupling reactions.

A general efficient electrochemical method for the preparation of aryl- and heteroarylpyridazines in a nickel-catalyzed cross-coupling reaction of 3-chloro-6-methoxypyridazine and 3-chloro-6-methylpyridazine with a range of functionalized aryl or heteroaryl halides is reported.

Structure-activity relationships of aryloxyalkanoic acid hydroxyamides as potent inhibitors of histone deacetylase.

Syntheses of aryloxyalkanoic acid hydroxyamides are described, all of which are potent inhibitors of histone deacetylase, some being more potent in vitro than trichostatin A (IC(50)=3 nM). Variation of the substituents on the benzene ring as well as fusion of a second ring have marked effects on potency, in vitro IC(50) values down to 1 nM being obtained.