Enhanced isobutanol production from acetate by combinatorial overexpression of acetyl-CoA synthetase and anaplerotic enzymes in engineered Escherichia coli.

Acetic acid is an abundant material that can be used as a carbon source by microorganisms. Despite its abundance, its toxicity and low energy content make it hard to utilize as a sole carbon source for biochemical production. To increase acetate utilization and isobutanol production with engineered Escherichia coli, the feasibility of utilizing acetate and metabolic engineering was investigated. The expression of acs, pckA, and maeB increased isobutanol production by up to 26%, and the addition of TCA cycle intermediates indicated that the intermediates can enhance isobutanol production. For isobutanol production from acetate, acetate uptake rates and the NADPH pool were not limiting factors compared to glucose as a carbon source. This work represents the first approach to produce isobutanol from acetate with pyruvate flux optimization to extend the applicability of acetate. This technique suggests a strategy for biochemical production utilizing acetate as the sole carbon source.

Application of acetyl-CoA acetyltransferase (AtoAD) in Escherichia coli to increase 3-hydroxyvalerate fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate).

Polyhydroxyalkanoate (PHA) is a family of biodegradable polymers, and incorporation of different monomers can alter its physical properties. To produce the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) containing a high level of 3-hydroxyvalerate (3HV) by altering acetyl-CoA pool levels, we overexpressed an acetyl-CoA acetyltransferase (atoAD) in an engineered E. coli strain, YH090, carrying PHA synthetic genes bktB, phaB, and phaC. It was found that, with introduction of atoAD and with propionate as a co-substrate, 3HV fraction in PHA was increased up to 7.3-fold higher than a strain without atoAD expressed in trans (67.9 mol%). By the analysis of CoA pool concentrations in vivo and in vitro using HPLC and LC-MS, overexpression of AtoAD was shown to decrease the amount of acetyl-CoA and increase the propionyl-CoA/acetyl-CoA ratio, ultimately resulting in an increased 3HV fraction in PHA. Finally, synthesis of P(3HB-co-3HV) containing 57.9 mol% of 3HV was achieved by fed-batch fermentation of YJ101 with propionate.

Combinatorial application of two aldehyde oxidoreductases on isobutanol production in the presence of furfural.

Furfural is a toxic by-product formulated from pretreatment processes of lignocellulosic biomass. In order to utilize the lignocellulosic biomass on isobutanol production, inhibitory effect of the furfural on isobutanol production was investigated and combinatorial application of two oxidoreductases, FucO and YqhD, was suggested as an alternative strategy. Furfural decreased cell growth and isobutanol production when only YqhD or FucO was employed as an isobutyraldehyde oxidoreductase. However, combinatorial overexpression of FucO and YqhD could overcome the inhibitory effect of furfural giving higher isobutanol production by 110% compared with overexpression of YqhD. The combinatorial oxidoreductases increased furfural detoxification rate 2.1-fold and also accelerated glucose consumption 1.4-fold. When it compares to another known system increasing furfural tolerance, membrane-bound transhydrogenase (pntAB), the combinatorial aldehyde oxidoreductases were better on cell growth and production. Thus, to control oxidoreductases is important to produce isobutanol using furfural-containing biomass and the combinatorial overexpression of FucO and YqhD can be an alternative strategy.

Sensitive change of iso-branched fatty acid (iso-15:0) in Bacillus pumilus PAMC 23174 in response to environmental changes.

In this study, the environmental adaptive metabolic processes were investigated using a psychrotrophic polar bacterium Bacillus pumilus PAMC 23174 in response to various temperatures and nutrients, especially in regard to the synthesis of fatty acids. Fatty acid methyl ester analysis was performed using gas chromatography-mass spectrometry and we found that a sensitive changes in iso-branched fatty acid (iso-15:0) synthesis occurred when adjusting the nutritional ratio of branched chain fatty acids (anteiso/iso) with different temperatures, resulting in a change in the balance of anteiso- and iso-form fatty acids. We also observed that this Arctic bacterium preferred amino acid leucine for the synthesis of fatty acids. The increased and decreased synthesis of iso-form fatty acids in response to different temperatures and leucine preference, changes the fatty acid ratio in bacteria, which further affects the membrane fluidity and it is also directly correlated with survival of bacteria in an extreme environment. Hence, this study suggests that B. pumilus PAMC 23174 is a potential model organism for the analysis of the unique ecological adaptations of polar bacteria in changing and the extreme environments.

Isobutanol production from an engineered Shewanella oneidensis MR-1.

Shewanella oneidensis MR-1 is one of the most well-known metal-reducing bacteria and it has been extensively studied for microbial fuel cell and bioremediation aspects. In this study, we have examined S. oneidensis MR-1 as an isobutanol-producing host by assessing three key factors such as isobutanol synthetic genes, carbon sources, and electron supply systems. Heterologous Ehrlich pathway genes, kivD encoding ketoisovalerate decarboxylase and adh encoding alcohol dehydrogenase, were constructed in S. oneidensis MR-1. Among the composition of carbon sources examined, 2% of N-acetylglucosamine, 1.5% of pyruvate and 2% of lactate were found to be the most optimal nutrients and resulted in 10.3 mg/L of isobutanol production with 48 h of microaerobic incubation. Finally, the effects of metal ions (electron acceptor) and direct electron transfer systems on isobutanol production were investigated, and Fe(2+) ions increased the isobutanol production up to 35%. Interestingly, deletion of mtrA and mtrB, genes responsible for membrane transport systems, did not have significant impact on isobutanol production. Finally, we applied engineered S. oneidensis to a bioelectrical reactor system to investigate the effect of a direct electron supply system on isobutanol production, and it resulted in an increased growth and isobutanol production (up to 19.3 mg/L). This report showed the feasibility of S. oneidensis MR-1 as a genetic host to produce valuable biochemicals and combine an electron-supplying system with biotechnological applications.

Biotransformation of lysine into cadaverine using barium alginate-immobilized Escherichia coli overexpressing CadA.

In this study, Escherichia coli cells overexpressing lysine decarboxylase (CadA) were used for cadaverine production. Barium alginate was selected as a matrix for immobilization of E. coli YH91. Free cells and immobilized cells (IC) were characterized for their physiochemical properties, and the optimum pH and temperature were determined as 6 and 37 °C, respectively. Immobilized cells were three times more thermally stable compared to free cells at the optimum temperature and had a half-life (t 1/2) of 131 h. The free cells lost most of lysine decarboxylase activity after nine cycles, but in contrast immobilized cells retained 56% of their residual activity even after the 18th cycle. The immobilized cells gave a maximum production of cadaverine (75.8 g/L) with 84% conversion.

Starch based polyhydroxybutyrate production in engineered Escherichia coli.

Every year, the amount of chemosynthetic plastic accumulating in the environment is increasing, and significant time is required for decomposition. Bio-based, biodegradable plastic is a promising alternative, but its production is not yet a cost effective process. Decreasing the production cost of polyhydroxyalkanoate by utilizing renewable carbon sources for biosynthesis is an important aspect of commercializing this biodegradable polymer. An Escherichia coli strain that expresses a functional amylase and accumulate polyhydroxybutyrate (PHB), was constructed using different plasmids containing the amylase gene of Panibacillus sp. and PHB synthesis genes from Ralstonia eutropha. This engineered strain can utilize starch as the sole carbon source. The maximum PHB production (1.24 g/L) was obtained with 2% (w/v) starch in M9 media containing 0.15% (w/v) yeast extract and 10 mM glycine betaine. The engineered E. coli SKB99 strain can accumulate intracellular PHB up to 57.4% of cell dry mass.

Clinicopathologic characteristics and outcomes of gastric cancers with the MSI-H phenotype.

OBJECTIVES: We examined the correlation between microsatellite instability (MSI) status and the clinicopathological features and prognostic value in gastric cancer and compared the efficacy of immunohistochemical staining for hMLH1 and hMSH2 with a polymerase chain reaction (PCR)-based test. METHODS: MSI status was examined in 328 consecutive gastric adenocarcinomas using tissue preserved in paraffin blocks. DNA extracted from tumor sections and the corresponding normal tissue was analyzed using PCR at the five microsatellite loci recommended by the National Cancer Institute (NCI). Immunohistochemical staining for hMLH1 and hMSH2 was performed and the results were compared with the MSI status measured using PCR. The relationship of the clinicopathologic variables to MSI status was analyzed. RESULTS: Of the gastric cancers, 8.2% (n = 27) contained MSI-H and this was associated with older age (>70 years), distal tumor location, tumor size, and intestinal subtype. Lymphatic and vascular invasion were associated with the disease-free survival. On immunohistochemical staining, the loss of expression of hMLH1 or hMSH2 was observed in 11% (n = 36). The sensitivity, specificity, positive predictive value, negative predictive value, and accuracy of immunohistochemical staining were 63.0%, 93.7%, 47.2%, 96.6%, and 91.2%, respectively. CONCLUSIONS: Gastric cancers with MSI-H have specific clinicopathologic characteristics, such as older age at diagnosis, distal tumor location, increased tumor size, and intestinal histologic type. However, immunohistochemical staining for hMLH1 and hMSH2 is not as accurate as the PCR-based MSI test.

Production of itaconate by whole-cell bioconversion of citrate mediated by expression of multiple cis-aconitate decarboxylase (cadA) genes in Escherichia coli.

Itaconate, a C5 unsaturated dicarboxylic acid, is an important chemical building block that is used in manufacturing high-value products, such as latex and superabsorbent polymers. Itaconate is produced by fermentation of sugars by the filamentous fungus Aspergillus terreus. However, fermentation by A. terreus involves a long fermentation period and the formation of various byproducts, resulting in high production costs. E. coli has been developed as an alternative for producing itaconate. However, fermentation of glucose gives low conversion yields and low productivity. Here, we report the whole-cell bioconversion of citrate to itaconate with enhanced aconitase and cis-aconitate decarboxylase activities by controlling the expression of multiple cadA genes. In addition, this bioconversion system does not require the use of buffers, which reduces the production cost and the byproducts released during purification. Using this whole-cell bioconversion system, we were able to catalyze the conversion of 319.8 mM of itaconate (41.6 g/L) from 500 mM citrate without any buffer system or additional cofactors, with 64.0% conversion in 19 h and a productivity of 2.19 g/L/h. Our bioconversion system suggests very high productivity for itaconate production.

Optimization of Direct Lysine Decarboxylase Biotransformation for Cadaverine Production with Whole-Cell Biocatalysts at High Lysine Concentration.

Cadaverine (1,5-diaminopentane) is an important industrial chemical with a wide range of applications. Although there have been many efforts to produce cadaverine through fermentation, there are not many reports of the direct cadaverine production from lysine using biotransformation. Whole-cell reactions were examined using a recombinant Escherichia coli strain overexpressing the E. coli MG1655 cadA gene, and various parameters were investigated for the whole-cell bioconversion of lysine to cadaverine. A high concentration of lysine resulted in the synthesis of pyridoxal-5'-phosphate (PLP) and it was found to be a critical control factor for the biotransformation of lysine to cadaverine. When 0.025 mM PLP and 1.75 M lysine in 500 mM sodium acetate buffer (pH6) were used, consumption of 91% lysine and conversion of about 80% lysine to cadaverine were successfully achieved.

A Liquid-Based Colorimetric Assay of Lysine Decarboxylase and Its Application to Enzymatic Assay.

A liquid-based colorimetric assay using a pH indicator was introduced for high-throughput monitoring of lysine decarboxylase activity. The assay is based on the color change of bromocresol purple, measured at 595 nm in liquid reaction mixture, due to an increase of pH by the production of cadaverine. Bromocresol purple was selected as the indicator because it has higher sensitivity than bromothymol blue and pheonol red within a broad range and shows good linearity within the applied pH. We applied this for simple determination of lysine decarboxylase reusability using 96-well plates, and optimization of conditions for enzyme overexpression with different concentrations of IPTG on lysine decarboxylase. This assay is expected to be applied for monitoring and quantifying the liquid-based enzyme reaction in biotransformation of decarboxylase in a high-throughput way.

Lipase-Catalyzed Production of 6-O-cinnamoyl-sorbitol from D-sorbitol and Cinnamic Acid Esters.

To overcome the poor properties of solubility and stability of cinnamic acid, cinnamate derivatives with sugar alcohols were produced using the immobilized Candida antarctica lipase with vinyl cinnamate and D-sorbitol as substrate at 45 °C. Immobilized C. antarctica lipase was found to synthesize 6-O-cinnamoyl-sorbitol and confirmed by HPLC and (1)H-NMR and had a preference for vinyl cinnamate over other esters such as allyl-, ethyl-, and isobutyl cinnamate as co-substrate with D-sorbitol. Contrary to D-sorbitol, vinyl cinnamate, and cinnamic acid, the final product 6-O-cinnamoyl-sorbitol was found to have radical scavenging activity. This would be the first report on the biosynthesis of 6-O-cinnamoyl-sorbitol with immobilized enzyme from C. antarctica.

Production of rapamycin in Streptomyces hygroscopicus from glycerol-based media optimized by systemic methodology.

Rapamycin, produced by the soil bacterium Streptomyces hygroscopicus, has the ability to suppress the immune system and is used as an antifungal, anti-inflammatory, antitumor, and immunosuppressive agent. In an attempt to increase the productivity of rapamycin, mutagenesis of wild-type Streptomyces hygroscopicus was performed using ultraviolet radiation, and the medium composition was optimized using glycerol (which is one of the cheapest starting substrates) by applying Plackett-Burman design and response surface methodology. Plackett-Burman design was used to analyze 14 medium constituents: M100 (maltodextrin), glycerol, soybean meal, soytone, yeast extract, (NH4)2SO4, L-lysine, KH2PO4, K2HPO4, NaCl, FeSO4·7H2O, CaCO3, 2-(N-morpholino) ethanesulfonic acid, and the initial pH level. Glycerol, soytone, yeast extract, and CaCO3 were analyzed to evaluate their effect on rapamycin production. The individual and interaction effects of the four selected variables were determined by Box-Behnken design, suggesting CaCO3, soytone, and yeast extract have negative effects, but glycerol was a positive factor to determine rapamycin productivity. Medium optimization using statistical design resulted in a 45% (220.7 ± 5.7 mg/l) increase in rapamycin production for the Streptomyces hygroscopicus mutant, compared with the unoptimized production medium (151.9 ± 22.6 mg/l), and nearly 588% compared with wildtype Streptomyces hygroscopicus (37.5 ± 2.8 mg/l). The change in pH showed that CaCO3 is a critical and negative factor for rapamycin production.

Putative role of a Streptomyces coelicolor-derived α-mannosidase in deglycosylation and antibiotic production.

SCO0948 was found to be the single open reading frame annotated to encode an α-mannosidase (AM1) in Streptomyces coelicolor M145. To characterize the protein, we overexpressed SCO0948 in Escherichia coli BL21(DE3). Recombinant AM1, with a molecular weight of 110 kDa, exhibited α-mannosidase activity toward 4-nitrophenyl-α-D-mannopyranoside with a K m of 4.61 mM, a V(max) of 101.6 mM/min, and a specific activity of 47.96 U/mg. Treatment of ovalbumin, a glycoprotein, with AM1 resulted in partial deglycosylation, as assessed by glycostaining and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The S. coelicolor deletion mutant for SCO0948 failed to produce α-mannosidase activity, confirming AM1 as the only α-mannosidase in S. coelicolor M145. Interestingly, the deletion mutant and a complementation strain produced lower levels of the antibiotics actinorhodin and undecylprodigiosin in glucose minimal media. The results indicate that AM1 as an α-mannosidase influences deglycosylation and antibiotic production in S. coelicolor M145.