Cohort profile: The Assessing Imperial Valley Respiratory Health and the Environment (AIRE) study.

BACKGROUND: The Children's Assessing Imperial Valley Respiratory Health and the Environment (AIRE) study is a prospective cohort study of environmental influences on respiratory health in a rural, southeastern region of California (CA), which aims to longitudinally examine the contribution of a drying saline lake to adverse health impacts in children. OBJECTIVES: This cohort was established through a community-academic partnership with the goal of assessing the health effects of childhood exposures to wind-blown particulate matter (PM) and inform public health action. We hypothesize that local PM sources are related to poorer children's respiratory health. POPULATION: Elementary school children in Imperial Valley, CA. DESIGN: Prospective cohort study. METHODS: Between 2017 and 2019, we collected baseline information on 731 children, then follow-up assessments yearly or twice-yearly since 2019. Data have been collected on children's respiratory health, demographics, household characteristics, physical activity and lifestyle, via questionnaires completed by parents or primary caregivers. In-person measurements, conducted since 2019, repeatedly assessed lung function, height, weight and blood pressure. Exposure to air pollutants has been assessed by multiple methods and individually assigned to participants using residential and school addresses. Health data will be linked to ambient and local sources of PM, during and preceding the study period to understand how spatiotemporal trends in these environmental exposures may relate to respiratory health. PRELIMINARY RESULTS: Analyses of respiratory symptoms indicate a high prevalence of allergies, bronchitic symptoms and wheezing. Asthma diagnosis was reported in 24% of children at enrolment, which exceeds both CA state and US national prevalence estimates for children. CONCLUSIONS: The Children's AIRE cohort, while focused on the health impacts of the drying Salton Sea and air quality in Imperial Valley, is poised to elucidate the growing threat of drying saline lakes and wind-blown dust sources to respiratory health worldwide, as sources of wind-blown dust emerge in our changing climate.

Air quality and wheeze symptoms in a rural children's cohort near a drying saline lake.

BACKGROUND: In California, climate change and competing water demands are intensifying the desiccation of the Salton Sea, a large land-locked "sea" situated near the southeastern rural US-Mexico border region known as the Imperial Valley. METHODS: To examine the possible effects of living near a saline lake on children's respiratory health, we analyzed the relationship between respiratory health symptoms and ambient PM concentrations among a predominantly Latino/Hispanic cohort of 722 school age children. Guardians completed a survey of their child's wheeze and respiratory health symptoms over the past 12 months, adapted from the International Study of Asthma and Allergies in Childhood (ISAAC). Exposure to dust storm hours (hourly concentrations >150 µg/m3 for PM10) was estimated using a network of regulatory monitors. RESULTS: Between 2017 and 2019, children were exposed to 98 to 395 dust event hours annually. We observed disparate effects for dust events and wheeze among children living near the Salton Sea. Every additional 100 dust storm hours per year among children living near the Sea (<11 km) was associated with a 9.5 percentage point increase in wheeze (95% CI: 3.5, 15.4), a 4.6 percentage point increase in bronchitic symptoms (95% CI: 0.18, 10.2) and a 6.7 percentage point increase in sleep disturbance due to wheeze (95% CI: 0.96, 12.4). Similarly, increases in PM10 were also associated with greater reported wheeze and bronchitic symptoms among those living near the Sea, compared to children living ≥11 km from the Sea. There was no association of dust storms or PM10 with wheeze or bronchitic symptoms among the children residing farther from the Sea. CONCLUSION: We observed stronger adverse impacts of PM10 and dust events on respiratory health among those living closer to the drying Salton Sea, compared to children living farther away. In this community of predominantly low-income residents of color, these impacts raise environmental justice concerns about the effects of the drying Salton Sea on public health.

School and childcare facility air quality decision-makers' perspectives on using low-cost sensors for wildfire smoke response.

BACKGROUND: During wildfire smoke episodes, school and childcare facility staff and those who support them rely upon air quality data to inform activity decisions. Where ambient regulatory monitor data is sparse, low-cost sensors can help inform local outdoor activity decisions, and provide indoor air quality data. However, there is no established protocol for air quality decision-makers to use sensor data for schools and childcare facilities. To develop practical, effective toolkits to guide the use of sensors in school and childcare settings, it is essential to understand the perspectives of the potential end-users of such toolkit materials. METHODS: We conducted 15 semi-structured interviews with school, childcare, local health jurisdiction, air quality, and school district personnel regarding sensor use for wildfire smoke response. Interviews included sharing PM2.5 data collected at schools during wildfire smoke. Interviews were transcribed and transcripts were coded using a codebook developed both a priori and amended as additional themes emerged. RESULTS: Three major themes were identified by organizing complementary codes together: (1) Low-cost sensors are useful despite data quality limitations, (2) Low-cost sensor data can inform decision-making to protect children in school and childcare settings, and (3) There are feasibility and public perception-related barriers to using low-cost sensors. CONCLUSIONS: Interview responses provided practical implications for toolkit development, including demonstrating a need for toolkits that allow a variety of sensor preferences. In addition, participants expected to have a wide range of available time for monitoring, budget for sensors, and decision-making types. Finally, interview responses revealed a need for toolkits to address sensor uses outside of activity decisions, especially assessment of ventilation and filtration.

Characterization of Annual Average Traffic-Related Air Pollution Concentrations in the Greater Seattle Area from a Year-Long Mobile Monitoring Campaign.

Growing evidence links traffic-related air pollution (TRAP) to adverse health effects. We designed an innovative and extensive mobile monitoring campaign to characterize TRAP exposure levels for the Adult Changes in Thought (ACT) study, a Seattle-based cohort. The campaign measured particle number concentration (PNC) to capture ultrafine particles (UFP), black carbon (BC), nitrogen dioxide (NO2), fine particulate matter (PM2.5), and carbon dioxide (CO2) at 309 roadside sites within a large, 1200 land km2 (463 mi2) area representative of the cohort. We collected about 29 two-minute measurements at each site during all seasons, days of the week, and most times of the day over a 1-year period. Validation showed good agreement between our BC, NO2, and PM2.5 measurements and monitoring agency sites (R2 = 0.68-0.73). Universal kriging-partial least squares models of annual average pollutant concentrations had cross-validated mean square error-based R2 (and root mean square error) values of 0.77 (1177 pt/cm3) for PNC, 0.60 (102 ng/m3) for BC, 0.77 (1.3 ppb) for NO2, 0.70 (0.3 µg/m3) for PM2.5, and 0.51 (4.2 ppm) for CO2. Overall, we found that the design of this extensive campaign captured the spatial pollutant variations well and these were explained by sensible land use features, including those related to traffic.

Distinct Ultrafine Particle Profiles Associated with Aircraft and Roadway Traffic.

The Mobile ObserVations of Ultrafine Particles study was a two-year project to analyze potential air quality impacts of ultrafine particles (UFPs) from aircraft traffic for communities near an international airport. The study assessed UFP concentrations within 10 miles of the airport in the directions of aircraft flight. Over the course of four seasons, this study conducted a mobile sampling scheme to collect time-resolved measures of UFP, CO2, and black carbon (BC) concentrations, as well as UFP size distributions. Primary findings were that UFPs were associated with both roadway traffic and aircraft sources, with the highest UFP counts found on the major roadway (I-5). Total concentrations of UFPs alone (10-1000 nm) did not distinguish roadway and aircraft features. However, key differences existed in the particle size distribution and the black carbon concentration for roadway and aircraft features. These differences can help distinguish between the spatial impact of roadway traffic and aircraft UFP emissions using a combination of mobile monitoring and standard statistical methods.

Does surrounding greenness moderate the relationship between apparent temperature and physical activity? Findings from the PHENOTYPE project.

BACKGROUND: Physical activity can be affected by both meteorological conditions and surrounding greenness, but few studies have evaluated the effects of these environmental factors on physical activity simultaneously. This multi-city comparative study aimed to assess the synergetic effects of apparent temperature and surrounding greenness on physical activity in four European cities. Specifically, we aimed to identify an interaction between surrounding greenness and apparent temperature in the effects on physical activity. METHODS: Data were collected from 352 adult residents of Barcelona (Spain), Stoke-on-Trent (United Kingdom), Doetinchem (The Netherlands), and Kaunas (Lithuania) as part of the PHENOTYPE study. Participants wore a smartphone for seven consecutive days between May-December 2013 and provided additional sociodemographic survey data. Hourly average physical activity (Metabolic Equivalent of Task (MET)) and surrounding greenness (NDVI) were derived from the Calfit mobile application collecting accelerometer and location data. Hourly apparent temperature was calculated from temperature and relative humidity, which were obtained from local meteorological stations along with other meteorological covariates (rainfall, windspeed, and sky darkness). We assessed the interaction effects of apparent temperature and surrounding greenness on hourly physical activity for each city using linear mixed models, while adjusting for meteorological, demographic, and time-related variables. RESULTS: We found significant interactions between apparent temperature and surrounding greenness on hourly physical activity in three of four cities, aside from the coastal city of Barcelona. Significant quadratic effects of apparent temperature were found in the highest level of surrounding greenness for Stoke-on-Trent and Doetinchem, with 4% decrease in median MET observed for a 10°C departure from optimal temperature (15.2°C and 14.6°C, respectively). Significant linear effects were found for higher levels of surrounding greenness in Kaunas, whereby an increase of 10°C was associated with ∼4% increase in median MET. CONCLUSION: Apparent temperature and surrounding greenness interacted in the effect on hourly physical activity across three of four European cities, with varying effect between cities. While quadratic effects of temperature suggest diminishing levels of physical activity in the highest greenness levels in cities of temperate climates, the variation in surrounding greenness between cities could be further explored, particularly by looking at indoor-outdoor locations. The study findings support the need for evidence-based physical activity promotion and urban design.

Source Apportionment of Environmental Combustion Sources using Excitation Emission Matrix Fluorescence Spectroscopy and Machine Learning.

The link between particulate matter (PM) air pollution and negative health effects is well-established. Air pollution was estimated to cause 4.9 million deaths in 2017 and PM was responsible for 94% of these deaths. In order to inform effective mitigation strategies in the future, further study of PM and its health effects is important. Here, we present a method for identifying sources of combustion generated PM using excitation-emission matrix (EEM) fluorescence spectroscopy and machine learning (ML) algorithms. PM samples were collected during a health effects exposure assessment panel study in Seattle. We use archived field samples from the exposure study and the associated positive matrix factorization (PMF) source apportionment based on X-ray fluorescence and light absorbing carbon measurements to train convolutional neural network and principal component regression algorithms. We show EEM spectra from cyclohexane extracts of the archived filter samples can be used to accurately apportion mobile and vegetative burning sources but were unable to detect crustal dust, Cl-rich, secondary sulfate and fuel oil sources. The use of this EEM-ML approach may be used to conduct PM exposure studies that include source apportionment of combustion sources.

Deployment, Calibration, and Cross-Validation of Low-Cost Electrochemical Sensors for Carbon Monoxide, Nitrogen Oxides, and Ozone for an Epidemiological Study.

We designed and built a network of monitors for ambient air pollution equipped with low-cost gas sensors to be used to supplement regulatory agency monitoring for exposure assessment within a large epidemiological study. This paper describes the development of a series of hourly and daily field calibration models for Alphasense sensors for carbon monoxide (CO; CO-B4), nitric oxide (NO; NO-B4), nitrogen dioxide (NO2; NO2-B43F), and oxidizing gases (OX-B431)-which refers to ozone (O3) and NO2. The monitor network was deployed in the Puget Sound region of Washington, USA, from May 2017 to March 2019. Monitors were rotated throughout the region, including at two Puget Sound Clean Air Agency monitoring sites for calibration purposes, and over 100 residences, including the homes of epidemiological study participants, with the goal of improving long-term pollutant exposure predictions at participant locations. Calibration models improved when accounting for individual sensor performance, ambient temperature and humidity, and concentrations of co-pollutants as measured by other low-cost sensors in the monitors. Predictions from the final daily models for CO and NO performed the best considering agreement with regulatory monitors in cross-validated root-mean-square error (RMSE) and R2 measures (CO: RMSE = 18 ppb, R2 = 0.97; NO: RMSE = 2 ppb, R2 = 0.97). Performance measures for NO2 and O3 were somewhat lower (NO2: RMSE = 3 ppb, R2 = 0.79; O3: RMSE = 4 ppb, R2 = 0.81). These high levels of calibration performance add confidence that low-cost sensor measurements collected at the homes of epidemiological study participants can be integrated into spatiotemporal models of pollutant concentrations, improving exposure assessment for epidemiological inference.

Energy consumption of using HEPA-based portable air cleaner in residences: A monitoring study in Seattle, US.

Portable air cleaners (PACs), offering both auto and manual (adjustable) operation modes, are commonly used in residences. Compared with adjustable mode, auto mode's advantage of reducing indoor PM2.5 has been previously demonstrated. This study examines the energy consumption of such PACs in six residences recruited in Seattle, United States, and compares the power consumption between auto and adjustable modes. Each residence went through a one-week-long PAC filtration session under auto and adjustable modes, respectively. PAC power consumption, indoor PM2.5, temperature, and relative humidity (RH) were measured at 10-second intervals in each residence. A linear mixed-effects regression (LMER) model was used to compare the PAC power consumption between the two modes after adjusting for indoor PM2.5, temperature, and RH. Results show that the mean (standard deviation) PAC power consumption under adjustable and auto modes were 7.0 (3.5) and 6.8 (2.6) W, respectively. The average monthly energy consumption of continuous PAC operation was estimated to be ~5 kWh for both modes. Based on the LEMR model, PAC power consumption under auto mode was approximately 3% larger than that under adjustable mode, after adjusting for living-room PM2.5, temperature, and RH levels. The implications for PAC operation mode selection in residential environments were discussed.

Residential cooking-related PM2.5: Spatial-temporal variations under various intervention scenarios.

Some cooking events can generate high levels of hazardous PM2.5. This study assesses the dispersion of cooking-related PM2.5 throughout a naturally-ventilated apartment in the US, examines the dynamic process of cooking-related emissions, and demonstrates the impact of different indoor PM2.5 mitigating strategies. We conducted experiments with a standardized pan-frying cooking procedure under seven scenarios, involving opening kitchen windows, using a range hood, and utilizing a portable air cleaner (PAC) in various indoor locations. Real-time PM2.5 concentrations were measured in the open kitchen, living room, bedroom (door closed), and outdoor environments. Decay-related parameters were estimated, and time-resolved PM2.5 emission rates for each experiment were determined using a dynamic model. Results show that the 1-min mean PM2.5 concentrations in the kitchen and living room peaked 1-7 min after cooking at levels of 200-1400 µg/m3, which were more than 9 times higher than the peak bedroom levels. Mean (standard deviation) kt for the kitchen, ranging from 0.58 (0.02) to 6.62 (0.34) h-1, was generally comparable to that of the living room (relative difference < 20%), but was 1-5 times larger than that of the bedroom. The range of PM2.5 full-decay time was between 1-10 h for the kitchen and living room, and from 0 to > 6 h for the bedroom. The PM2.5 emission rates during and 5 min after cooking were 2.3 (3.4) and 5.1 (3.9) mg/min, respectively. Intervention strategies, including opening kitchen windows and using PACs either in the kitchen or living room, can substantially reduce indoor PM2.5 levels and the related full-decay time. For scenarios involving a PAC, placing it in the kitchen (closer to the source) resulted in better efficacy.

Using Vehicles' Rendezvous for In Situ Calibration of Instruments in Fleet Vehicle-Based Air Pollution Mobile Monitoring.

This study examines the feasibility of the in situ calibration of instruments for fleet vehicle-based mobile monitoring of ultrafine particles (UFPs) and black carbon (BC) by comparing rendezvous vehicle measurements. Two vehicles with identical makes and models of UFP and BC monitors as well as GPS receivers were sampled within 140 m of each other for 2 h in total during winter in Seattle, Washington. To identify an optimal intervehicle distance for rendezvous calibration, 6 different buffers within 0-140 m for UFP monitors and 5 different buffers within 0-90 m for BC monitors were chosen, and the results of calibration were compared against a reference scenario, which consisted of mobile colocation measurements with both sets of the UFP and BC monitors deployed in one of the vehicles. Results indicate that the optimal distances for rendezvous calibration are 10-80 m for UFP monitors and 0-30 m for BC monitors. In comparison with the mobile colocation calibration, the rendezvous calibration shows a normalized root mean squared deviation of 6-14% and a normalized mean absolute deviation of 4-8% for these monitors. Criteria for applying a rendezvous calibration approach are presented, and an extension of this approach to an instrumented fleet of mobile monitoring vehicles is discussed.

Excitation-Emission Matrix Spectroscopy for Analysis of Chemical Composition of Combustion Generated Particulate Matter.

Analysis of particulate matter (PM) is important for the assessment of human exposures to potentially harmful agents, notably combustion-generated PM. Specifically, polycyclic aromatic hydrocarbons (PAHs) found in ultrafine PM have been linked to cardiovascular diseases and carcinogenic and mutagenic effects. In this study, we quantify the presence and concentrations of PAHs with lower molecular weight (LMW, 126 < MW < 202) and higher molecular weight (HMW, 226 < MW < 302), i.e., smaller and larger than Pyrene, in combustion-generated PM using excitation-emission matrix (EEM) fluorescence spectroscopy. Laboratory combustion PM samples were generated in a laminar diffusion inverted gravity flame reactor (IGFR) operated on ethylene and ethane. Fuel dilution by Ar in 0% to 90% range controlled the flame temperature. The colder flames result in lower PM yields however, the PM PAH content increases significantly. Temperature thresholds for PM transition from low to high organic carbon content were characterized based on the maximum flame temperature (Tmax,c ∼ 1791 to 1857 K) and the highest soot luminosity region temperature (T*c ∼ 1600 to 1650K). Principal component regression (PCR) analysis of the EEM spectra of IGFR samples correlates to GCMS data with R2 = 0.988 for LMW and 0.998 for HMW PAHs. PCR-EEM analysis trained on the IGFR samples was applied to PM samples from woodsmoke and diesel exhaust, the model accurately predicts HMW PAH concentrations with R2 = 0.976 and overestimates LMW PAHs.

Contribution of low-cost sensor measurements to the prediction of PM2.5 levels: A case study in Imperial County, California, USA.

Regulatory monitoring networks are often too sparse to support community-scale PM2.5 exposure assessment while emerging low-cost sensors have the potential to fill in the gaps. To date, limited studies, if any, have been conducted to utilize low-cost sensor measurements to improve PM2.5 prediction with high spatiotemporal resolutions based on statistical models. Imperial County in California is an exemplary region with sparse Air Quality System (AQS) monitors and a community-operated low-cost network entitled Identifying Violations Affecting Neighborhoods (IVAN). This study aims to evaluate the contribution of IVAN measurements to the quality of PM2.5 prediction. We adopted the Random Forest algorithm to estimate daily PM2.5 concentrations at a 1-km spatial resolution using three different PM2.5 datasets (AQS-only, IVAN-only, and AQS/IVAN combined). The results show that the integration of low-cost sensor measurements is an effective way to significantly improve the quality of PM2.5 prediction with an increase of cross-validation (CV) R2 by ~0.2. The IVAN measurements also contributed to the increased importance of emission source-related covariates and more reasonable spatial patterns of PM2.5. The remaining uncertainty in the calibrated IVAN measurements could still cause apparent outliers in the prediction model, highlighting the need for more effective calibration or integration methods to relieve its negative impact.

Use of low-cost PM monitors and a multi-wavelength aethalometer to characterize PM2.5 in the Yakama Nation Reservation.

Rural lower Yakima Valley, Washington is home to the reservation of the Confederated Tribes and Bands of the Yakama Nation, and is a major agricultural region. Episodic poor air quality impacts this area, reflecting sources of particulate matter with a diameter of less than 2.5 micrometers (PM2.5) that include residential wood smoke, agricultural biomass burning and other emissions, truck traffic, backyard burning, and wildfire smoke. University of Washington partnered with the Yakama Nation Environmental Management Program to investigate characteristics of PM2.5 using 9 months of data from a combination of low-cost optical particle counters and a 5-wavelength aethalometer (MA200 Aethlabs) over 4 seasons and an episode of summer wildfire smoke. The greatest percentage of hours sampled with PM2.5 >12 µg/m3 occurred during the wildfire smoke episode (59%), followed by fall (23%) and then winter (21%). Mean (SD) values of Delta-C (µg/m3), which has been posited as an indicator of wood smoke, and determined as the mass absorbance difference at 375-880nm, were: summer - wildfire smoke 0.34 (0.52), winter 0.27 (0.32), fall 0.10 (0.22), spring 0.05 (0.11), and summer - no wildfire smoke 0.04 (0.14). Mean (95% confidence interval) values of the absorption Ångström exponent, an indicator of the wavelength dependence of the aerosol, were: winter 1.5 (1.2-1.8), summer - wildfire smoke 1.4 (1.0-1.8), fall 1.3 (1.1-1.4), spring 1.2 (1.1-1.4), and summer - no wildfire smoke 1.2 (1.0-1.3). The trends in Delta-C and absorption Ångström exponents are consistent with expectations that a higher value reflects more biomass burning. These results suggest that biomass burning is an important contributor to PM2.5 in the wintertime, and emissions associated with diesel and soot are important contributors in the fall; however, the variety of emissions sources and combustion conditions present in this region may limit the utility of traditional interpretations of aethalometer data. Further understanding of how to interpret aethalometer data in regions with complex emissions would contribute to much-needed research in communities impacted by air pollution from agricultural as well as residential sources of combustion.

Excitation Emission Matrix Fluorescence Spectroscopy for Combustion Generated Particulate Matter Source Identification.

The inhalation of particulate matter (PM) is a significant health risk associated with reduced life expectancy due to increased cardio-pulmonary disease and exacerbation of respiratory diseases such as asthma and pneumonia. PM originates from natural and anthropogenic sources including combustion engines, cigarettes, agricultural burning, and forest fires. Identifying the source of PM can inform effective mitigation strategies and policies, but this is difficult to do using current techniques. Here we present a method for identifying PM source using excitation emission matrix (EEM) fluorescence spectroscopy and a machine learning algorithm. We collected combustion generated PM2.5 from wood burning, diesel exhaust, and cigarettes using filters. Filters were weighted to determine mass concentration followed by extraction into cyclohexane and analysis by EEM fluorescence spectroscopy. Spectra obtained from each source served as training data for a convolutional neural network (CNN) used for source identification in mixed samples. This method can predict the presence or absence of the three laboratory sources with an overall accuracy of 89% when the threshold for classifying a source as present is 1.1 µg/m3 in air over a 24-hour sampling time. The limit of detection for cigarette, diesel and wood are 0.7, 2.6, 0.9 µg/m3, respectively, in air assuming a 24-hour sampling time at an air sampling rate of 1.8 liters per minute. We applied the CNN algorithm developed using the laboratory training data to a small set of field samples and found the algorithm was effective in some cases but would require a training data set containing more samples to be more broadly applicable.

Developing a Low-Cost Passive Method for Long-Term Average Levels of Light-Absorbing Carbon Air Pollution in Polluted Indoor Environments.

We propose a low-cost passive method for monitoring long-term average levels of light-absorbing carbon air pollution in polluted indoor environments. Building on prior work, the method here estimates the change in reflectance of a passively exposed surface through analysis of digital images. To determine reproducibility and limits of detection, we tested low-cost passive samplers with exposure to kerosene smoke in the laboratory and to environmental pollution in 20 indoor locations. Preliminary results suggest robust reproducibility (r = 0.99) and limits of detection appropriate for longer-term (~1-3 months) monitoring in households that use solid fuels. The results here suggest high precision; further testing involving "gold standard" measurements is needed to investigate accuracy.

Performance of a Low-Cost Sensor Community Air Monitoring Network in Imperial County, CA.

Air monitoring networks developed by communities have potential to reduce exposures and affect environmental health policy, yet there have been few performance evaluations of networks of these sensors in the field. We developed a network of over 40 air sensors in Imperial County, CA, which is delivering real-time data to local communities on levels of particulate matter. We report here on the performance of the Network to date by comparing the low-cost sensor readings to regulatory monitors for 4 years of operation (2015-2018) on a network-wide basis. Annual mean levels of PM10 did not differ statistically from regulatory annual means, but did for PM2.5 for two out of the 4 years. R2s from ordinary least square regression results ranged from 0.16 to 0.67 for PM10, and increased each year of operation. Sensor variability was higher among the Network monitors than the regulatory monitors. The Network identified a larger number of pollution episodes and identified under-reporting by the regulatory monitors. The participatory approach of the project resulted in increased engagement from local and state agencies and increased local knowledge about air quality, data interpretation, and health impacts. Community air monitoring networks have the potential to provide real-time reliable data to local populations.

Developing an index of dose of exposure to early childhood obesity community interventions.

The recognition of the role of the environment in contributing to the obesity epidemic has led to increasing efforts to address obesity through environmental or place-based approaches in the past decade. This has challenged the use of the quasi-experimental design for evaluating community interventions. The objective of this study is to describe the development of an index of dose of exposure to community interventions that impact early childhood obesity. The goal is to provide an alternative means for evaluating the impact of multiple intervention strategies that target the same community at the same time. Two workgroups developed domains, constructs and protocols for estimating a "community intervention dose index" (CIDI). Information used to develop the protocol came from multiple sources including databases and reports of major funding organizations on obesity-related interventions implemented in Los Angeles County from 2005 to 2015, key informant interviews, and published literature. The workgroups identified five domains relevant to the consideration of dose of exposure to interventions: physical resources, social resources, context, capacity development, and programs and policies; developed a system for classifying programs and policies into macro- and micro-level intervention strategies; and sought ratings of strategy effectiveness from a panel of 13 experts using the Delphi technique, to develop an algorithm for calculating CIDI that considers intervention strength, reach and fidelity. This CIDI can be estimated for each community and used to evaluate the impact of multiple programs that use a myriad of intervention strategies for addressing a defined health outcome.

The Association Between Park Facilities and Duration of Physical Activity During Active Park Visits.

Public parks provide places for urban residents to obtain physical activity (PA), which is associated with numerous health benefits. Adding facilities to existing parks could be a cost-effective approach to increase the duration of PA that occurs during park visits. Using objectively measured PA and comprehensively measured park visit data among an urban community-dwelling sample of adults, we tested the association between the variety of park facilities that directly support PA and the duration of PA during park visits where any PA occurred. Cross-classified multilevel models were used to account for the clustering of park visits (n = 1553) within individuals (n = 372) and parks (n = 233). Each additional different PA facility at a park was independently associated with a 6.8% longer duration of PA bouts that included light-intensity activity, and an 8.7% longer duration of moderate to vigorous PA time. Findings from this study are consistent with the hypothesis that more PA facilities increase the amount of PA that visitors obtain while already active at a park.

The association between park facilities and the occurrence of physical activity during park visits.

Prior research has found a positive relationship between the variety of park facilities and park-based physical activity (PA), but has not provided an estimate of the effect that additional different PA facilities have on whether an individual is active during a park visit. Using objective measures of park visits and PA from an urban sample of 225 adults in King County, Washington, we compared the variety of PA facilities in parks visited where an individual was active to PA facilities in parks where the same individual was sedentary. Each additional different PA facility at a park was associated with a 6% increased probability of being active during a visit. Adding additional different PA facilities to a park appears to have a moderate effect on whether an individual is active during a park visit, which could translate into large community health impacts when scaled up to multiple park visitors.