Three-Dimensional Soundproof Acoustic Metacage.

In this Letter, we theoretically propose and experimentally demonstrate a three-dimensional soundproof acoustic cage structure, hereby denoted as an acoustic metacage. The metacage is composed of six acoustic metamaterial slabs with open holes and hidden bypass space coiling tunnels connected to the holes. Band structure analysis reveals a novel physical mechanism to open a low-frequency broad partial band gap via the band folding in other directions, which can also be interpreted by an effective medium with indefinite effective mass density and negative effective modulus. Transmission loss in simulations and in the acoustic impedance tube are administered. Strikingly, we prove that the soundproofing effect of the metacage is robust against the airflow perturbation induced by a fan. Our work paves a road for low-frequency airborne soundproof structures in the presence of ventilation.

Three-Dimensional Acoustic Double-Zero-Index Medium with a Fourfold Degenerate Dirac-like Point.

We report the first realization of a three-dimensional (3D) acoustic double-zero-index medium (DZIM) made of a cubic lattice of metal rods. While the past decade has seen several realizations of 2D DZIM, achieving such a medium in 3D has remained an elusive challenge. Here, we show how a fourfold degenerate point with conical dispersion can be induced at the Brillouin zone center, such that the material becomes a 3D DZIM with the effective mass density and compressibility simultaneously acquiring near-zero values. To demonstrate the functionalities of this new medium, we have fabricated an acoustic waveguide of 3D DZIM in form of a "periscope" with two 90° turns and observed tunneling of a normally incident planar wave through the waveguide yielding undistorted planar wave front at the waveguide exit. Our findings establish a practical route to realize 3D DZIM as an effective acoustic "void space" that offers unprecedented control over acoustic wave propagation.

Design, synthesis, and biofunctional evaluation of novel pentacyclic triterpenes bearing O-[4-(1-piperazinyl)-4-oxo-butyryl moiety as antiproliferative agents.

A series of pentacyclic triterpenoids derivatives bearing O-[4-(1-piperazinyl)-4-oxo-butyryl moiety has been synthesized and investigated for their potential antiproliferative activities. Pentacyclic triterpenoids derivative compounds were synthesized by a four or six step synthetic procedure. The activity studies were evaluated using Cell Counting Kit-8 method, and Western blotting analysis on A549 cells, MCF-7 cells and Hela cells. Compounds methyl 3-O-[4-(1-piperazinyl)-4-oxo-butyryl]olean-12-ene-28-oate (OA-4) and compound 2-O-[4-(1-piperazinyl)-4-oxo-butyryl]-3,23-dihydroxyurs-12-ene-28-oate (AA-5) were found to be promising antiproliferative agents. These compounds show potentiality for further optimization as antitumor drugs.

On-chip manipulation of single microparticles, cells, and organisms using surface acoustic waves.

Techniques that can dexterously manipulate single particles, cells, and organisms are invaluable for many applications in biology, chemistry, engineering, and physics. Here, we demonstrate standing surface acoustic wave based "acoustic tweezers" that can trap and manipulate single microparticles, cells, and entire organisms (i.e., Caenorhabditis elegans) in a single-layer microfluidic chip. Our acoustic tweezers utilize the wide resonance band of chirped interdigital transducers to achieve real-time control of a standing surface acoustic wave field, which enables flexible manipulation of most known microparticles. The power density required by our acoustic device is significantly lower than its optical counterparts (10,000,000 times less than optical tweezers and 100 times less than optoelectronic tweezers), which renders the technique more biocompatible and amenable to miniaturization. Cell-viability tests were conducted to verify the tweezers' compatibility with biological objects. With its advantages in biocompatibility, miniaturization, and versatility, the acoustic tweezers presented here will become a powerful tool for many disciplines of science and engineering.

High-speed optical humidity sensors based on chiral sculptured thin films.

A high-speed humidity sensor based on a nanostructured chiral sculptured thin film (CSTF) was fabricated and tested. The sensing principle is based on the shift of the central wavelength of the circular Bragg regime of the CSTF caused by adsorption and desorption of water vapor in the void regions of the CSTF. Spectral changes due to varying relative-humidity (RH) levels in the ambient environment were measured by a spectrometer. The CSTF sensor exhibited excellent reversibility and reproducibility from 40% to 100% RH. Moreover, the adsorption time of the sensor was measured to be as low as ∼140 ms, making it promising for many high-speed humidity-sensing applications.

The key role of delignification in overcoming the inherent recalcitrance of Chinese fir for biorefining.

The enzymatic digestibility of softwood is hindered for its highly recalcitrant nature to enzymatic attack. In this study, the effects of dilute sulfuric acid pretreatment (DSAP), acidic sodium chlorite pretreatment (SCP), and their combined pretreatments (DSA-SCP and SC-DSAP) on Chinese fir sawdust were investigated, respectively. Results demonstrated that lignin was the most important obstacle, and digestibility increased linearly with lignin removal yield. Furthermore, the results revealed that the order of sequential pretreatment significantly affected the delignification, and hemicellulose should be removed first. Compared to SC-DSAP, DSA-SCP involving the hemicellulose-removal-first strategy exhibited higher delignification efficiency. DSA-SCP caused lignin removal of 92.3% and the enzymatic hydrolysis was high of 97.9%. Finally, a regression model with high reliability was established to quickly evaluate pretreatment process. In summary, this study highlighted the importance of delignification for saccharification of softwood and unveiled the effect of hemicellulose on delignification.

One-pot process for lactic acid production from wheat straw by an adapted Bacillus coagulans and identification of genes related to hydrolysate-tolerance.

In this study, Bacillus coagulans CC17A with highly tolerant to hydrolysate was obtained through adaptive evolution. After 63 generations, the strain CC17A was stably in 45% (v/v) hydrolysate media and could digest multiple inhibitors in the hydrolysate. Based on its promising features, a one-pot process was developed to produce lactic acid (LA) from wheat straw. After dilute acid pretreatment of wheat straw, simultaneous saccharification and co-fermentation was conducted using CC17A without any solid-liquid separation and pre-detoxification. Total 35.50 g LA was produced from 80 g raw substrate and the production yield was as high as 70.9% of theoretical. To elucidate the tolerance mechanism, transcriptomic profiling of CC17A was studied. The highly up-regulated oxidoreductases and phenolic acid decarboxylase are considered to be involved with the inhibitors-tolerance of B. coagulans CC17A.

A millisecond micromixer via single-bubble-based acoustic streaming.

We present ultra-fast homogeneous mixing inside a microfluidic channel via single-bubble-based acoustic streaming. The device operates by trapping an air bubble within a "horse-shoe" structure located between two laminar flows inside a microchannel. Acoustic waves excite the trapped air bubble at its resonance frequency, resulting in acoustic streaming, which disrupts the laminar flows and triggers the two fluids to mix. Due to this technique's simple design, excellent mixing performance, and fast mixing speed (a few milliseconds), our single-bubble-based acoustic micromixer may prove useful for many biochemical studies and applications.

Acoustic tweezers: patterning cells and microparticles using standing surface acoustic waves (SSAW).

Here we present an active patterning technique named "acoustic tweezers" that utilizes standing surface acoustic wave (SSAW) to manipulate and pattern cells and microparticles. This technique is capable of patterning cells and microparticles regardless of shape, size, charge or polarity. Its power intensity, approximately 5x10(5) times lower than that of optical tweezers, compares favorably with those of other active patterning methods. Flow cytometry studies have revealed it to be non-invasive. The aforementioned advantages, along with this technique's simple design and ability to be miniaturized, render the "acoustic tweezers" technique a promising tool for various applications in biology, chemistry, engineering, and materials science.

Tunable Liquid Gradient Refractive Index (L-GRIN) lens with two degrees of freedom.

We report a tunable optofluidic microlens configuration named the Liquid Gradient Refractive Index (L-GRIN) lens for focusing light within a microfluidic device. The focusing of light was achieved through the gradient refractive index (GRIN) within the liquid medium, rather than via curved refractive lens surfaces. The diffusion of solute (CaCl(2)) between side-by-side co-injected microfluidic laminar flows was utilized to establish a hyperbolic secant (HS) refractive index profile to focus light. Tailoring the refractive index profile by adjusting the flow conditions enables not only tuning of the focal distance (translation mode), but also shifting of the output light direction (swing mode), a second degree of freedom that to our knowledge has yet to be accomplished for in-plane tunable microlenses. Advantages of the L-GRIN lens also include a low fluid consumption rate, competitive focusing performance, and high compatibility with existing microfluidic devices. This work provides a new strategy for developing integrative tunable microlenses for a variety of lab-on-a-chip applications.

Focusing microparticles in a microfluidic channel with standing surface acoustic waves (SSAW).

We introduce a novel on-chip microparticle focusing technique using standing surface acoustic waves (SSAW). Our method is simple, fast, dilution-free, and applicable to virtually any type of microparticle.

The Passive Film Growth Mechanism of New Corrosion-Resistant Steel Rebar in Simulated Concrete Pore Solution: Nanometer Structure and Electrochemical Study.

An elaborative study was carried out on the growth mechanism and properties of the passive film for a new kind of alloyed corrosion-resistant steel (CR steel). The passive film naturally formed in simulated concrete pore solutions (pH = 13.3). The corrosion resistance was evaluated by various methods including open circuit potential (OCP), linear polarization resistance (LPR) measurements, and electrochemical impedance spectroscopy (EIS). Meanwhile, the 2205 duplex stainless steel (SS steel) was evaluated for comparison. Moreover, the passive film with CR steel was studied by means of X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Atomic Force Microscope (AFM), and the Mott­Schottky approach. The results showed that the excellent passivity of CR steel could be detected in a high alkaline environment. The grain boundaries between the fine passive film particles lead to increasing Cr oxide content in the later passivation stage. The filling of cation vacancies in the later passivation stage as well as the orderly crystalized inner layer contributed to the excellent corrosion resistance of CR steel. A passive film growth model for CR steel was proposed.

Holographically formed, acoustically switchable gratings based on polymer-dispersed liquid crystals.

We report holographic polymer-dispersed liquid crystal (H-PDLC) gratings driven by surface acoustic waves (SAWs). Our experiments show that upon applying SAWs, the H-PDLC grating exhibited switchable properties: The diffraction of the H-PDLC grating decreased, whereas the transmission increased. This acoustically switchable behavior is due to the acoustic streaming-induced realignment of liquid crystals as well as absorption-resulted thermal diffusion. Such SAW-driven H-PDLC gratings are potentially useful in many photonic applications, such as optical switches, spatial light modulators, and switchable add/drop filters.

Surface acoustic wave microfluidics.

The recent introduction of surface acoustic wave (SAW) technology onto lab-on-a-chip platforms has opened a new frontier in microfluidics. The advantages provided by such SAW microfluidics are numerous: simple fabrication, high biocompatibility, fast fluid actuation, versatility, compact and inexpensive devices and accessories, contact-free particle manipulation, and compatibility with other microfluidic components. We believe that these advantages enable SAW microfluidics to play a significant role in a variety of applications in biology, chemistry, engineering and medicine. In this review article, we discuss the theory underpinning SAWs and their interactions with particles and the contacting fluids in which they are suspended. We then review the SAW-enabled microfluidic devices demonstrated to date, starting with devices that accomplish fluid mixing and transport through the use of travelling SAW; we follow that by reviewing the more recent innovations achieved with standing SAW that enable such actions as particle/cell focusing, sorting and patterning. Finally, we look forward and appraise where the discipline of SAW microfluidics could go next.

Tunable patterning of microparticles and cells using standing surface acoustic waves.

We have developed an acoustic-based tunable patterning technique by which microparticles or cells can be arranged into reconfigurable patterns in microfluidic channels. In our approach, we use pairs of slanted-finger interdigital transducers (SFITs) to generate a tunable standing surface acoustic wave field, which in turn patterns microparticles or cells in one- or two-dimensional arrays inside the microfluidic channels--all without the assistance of fluidic flow. By tuning the frequency of the input signal applied to the SFITs, we have shown that the cell pattern can be controlled with tunability of up to 72%. This acoustic-based tunable patterning technique has the advantages of wide tunability, non-invasiveness, and ease of integration to lab-on-a-chip systems, and shall be valuable in many biological and colloidal studies.

Three-dimensional continuous particle focusing in a microfluidic channel via standing surface acoustic waves (SSAW).

Three-dimensional (3D) continuous microparticle focusing has been achieved in a single-layer polydimethylsiloxane (PDMS) microfluidic channel using a standing surface acoustic wave (SSAW). The SSAW was generated by the interference of two identical surface acoustic waves (SAWs) created by two parallel interdigital transducers (IDTs) on a piezoelectric substrate with a microchannel precisely bonded between them. To understand the working principle of the SSAW-based 3D focusing and investigate the position of the focal point, we computed longitudinal waves, generated by the SAWs and radiated into the fluid media from opposite sides of the microchannel, and the resultant pressure and velocity fields due to the interference and reflection of the longitudinal waves. Simulation results predict the existence of a focusing point which is in good agreement with our experimental observations. Compared with other 3D focusing techniques, this method is non-invasive, robust, energy-efficient, easy to implement, and applicable to nearly all types of microparticles.

Continuous particle separation in a microfluidic channel via standing surface acoustic waves (SSAW).

This work introduces a method of continuous particle separation through standing surface acoustic wave (SSAW)-induced acoustophoresis in a microfluidic channel. Using this SSAW-based method, particles in a continuous laminar flow can be separated based on their volume, density and compressibility. In this work, a mixture of particles of equal density but dissimilar volumes was injected into a microchannel through two side inlets, sandwiching a deionized water sheath flow injected through a central inlet. A one-dimensional SSAW generated by two parallel interdigital transducers (IDTs) was established across the channel, with the channel spanning a single SSAW pressure node located at the channel center. Application of the SSAW induced larger axial acoustic forces on the particles of larger volume, repositioning them closer to the wave pressure node at the center of the channel. Thus particles were laterally moved to different regions of the channel cross-section based on particle volume. The particle separation method presented here is simple and versatile, capable of separating virtually all kinds of particles (regardless of charge/polarization or optical properties) with high separation efficiency and low power consumption.

Optically switchable gratings based on azo-dye-doped, polymer-dispersed liquid crystals.

We report a holographically fabricated, optically switchable grating using azo-dye-doped, polymer-dispersed liquid crystals (LCs). Our experiments show that upon photoirradiation, the diffraction of the grating was decreased significantly. We believe that this switching behavior is due to two factors--nematic-isotropic phase transition of LCs and thermal expansion of the grating structure.

Nanoporous polymeric transmission gratings for high-speed humidity sensing.

Nanoporous polymeric transmission gratings are demonstrated to be an excellent platform for high-speed optical humidity sensing. The grating structures were fabricated with a modified holographic, polymer-dispersed liquid crystal (H-PDLC) system. The sensing mechanism was based on changes in the relative transmission associated with the adsorption and desorption of water vapour by nanopores. The spectral changes due to varying humidity levels were measured by a spectrometer and compared with the calculated results based on the coupled wave theory. When the relative humidity (RH) changed from 40% to 95%, the relative transmission at 475 nm increased from 6.3% to 46.6% and that at 702 nm increased from 4% to 64%; these results indicate the sensor's high sensitivity. In addition, the sensor demonstrated excellent reversibility and reproducibility over a large RH range (from 20% to 100% RH). Moreover, the response time of the sensor was measured to be less than 350 ms, making it suitable for many high-speed humidity-sensing applications.